Impact of High-Pressure Homogenization Parameters on Physicochemical Characteristics,Bioactive Compounds Content,and Antioxidant Capacity of Blackcurrant Juice

High-pressure homogenization (HPH) is one of the food-processing methods being tested for use in food preservation as an alternative to pasteurization. The effects of the HPH process on food can vary depending on the process parameters used and product characteristics. The study aimed to investigate the effect of pressure, the number of passes, and the inlet temperature of HPH processing on the quality of cloudy blackcurrant juice as an example of food rich in bioactive compounds. For this purpose, the HPH treatment (pressure of 50, 150, and 220 MPa; one, three, and five passes; inlet temperature at 4 and 20 °C) and the pasteurization of the juice were performed. Titratable acidity, pH, turbidity, anthocyanin, vitamin C, and total phenolics content, as well as colour, and antioxidant activity were measured. Heat treatment significantly decreased the quality of the juice. For processing of the juice, the best were the combinations of the following: one pass, the inlet temperature of 4 °C, any of the used pressures (50, 150, and 220 MPa); and one pass, the inlet temperature of 20 °C, and the pressure of 150 MPa. Vitamin C and anthocyanin degradation have been reported during the HPH. The multiple passes of the juice through the machine were only beneficial in increasing the antioxidant capacity but negatively affected the colour stability.     

Effect of High Hydrostatic Pressure in the Storage of Spanish-Style Table Olive Fermented with Olive Leaf Extract and Saccharomyces cerevisiae

Olives treated according to the Spanish-style are firstly treated with caustic soda and then fermented in brine to reduce phenols. Next, olives are packed and subjected to pasteurization. The effect of different high hydrostatic pressure treatments (400 MPa, 4 and 6 min) was evaluated in Spanish-style table olives fermented with olive leaf extract (OLE) and S. cerevisiae compared with thermal pasteurization (P) at 80 °C for 15 min. HHP and P led to a significant reduction in yeast and aerobic mesophiles after the conservation treatment and during storage (300 days). The physical–chemical properties changed slightly during storage, except for olive hardness; olives treated with HHP presented a higher hardness than pasteurized ones. The CIELAB parameter L* decreased until day 300 in most of the treatments, as well as phenols. The HHP treatment led to significantly higher contents of phenolics (even during storage) than olives submitted to P. Some sensory attributes (colour, aspect, hardness, and overall evaluation) decreased during storage. P treatment caused a decrease in appearance, aroma, hardness, and overall evaluation compared to olives treated with HHP. Thus, the application of HHP in table olives to increase the shelf-life can be considered a valid alternative to P.     

Effect of High Hydrostatic Pressure Processing on the Structure and Property of Konjac Glucomannan–Casein Mixture

High hydrostatic pressure(HHP) processing is applied to a Konjac glucomannan(KGM)-casein(CS) mixture to explore the changes in the mixture's properties and microstructures.The mixture's viscosity increases by ~18.1% at low HHP(200 MPa) and decreases by about 5.3~31.7% at high HHP(600 MPa).Scanning electron microscopy analysis shows that low HHP induces a denser and more compact structure,and high HHP leads to a porous and reticular structure.X-ray diffraction shows that the mixture is amorphous without dramatic changes; only some small crystalline peaks appear under excessive pressure.Fourier transform infrared analysis indicates that the non-covalent interactions(hydrogen bonds,etc.) are probably the most important factors for the modification of mixture properties.Bonding enhances under low pressure,and weakens with increasing pressure and time.     

High Hydrostatic Pressure Treatment of Oysters (Crassostrea gigas)—Impact on Physicochemical Properties,Texture Parameters,and Volatile Flavor Compounds

High hydrostatic pressure (HHP) treatment is a non-thermal processing technology, which is widely used in the food processing field at present. In this study, the effects of HHP treatment (100~500 MPa for 5 min) on the physicochemical properties, texture parameters, and volatile flavor compounds of oysters were investigated. The results showed that HHP treatment increased the water content while reducing the crude protein and ash content of the oyster. Texture parameters showed that HHP treatment improved the hardness, springiness, chewiness, and cohesiveness of oysters, compared with the control group. In addition, the saturated fatty acid (SFA) content was slightly increased after HHP treatment, while the difference in monounsaturated fatty acid (MUFA) and polyunsaturated fatty acid (PUFA) content was not significant. Furthermore, HHP increased hexenoic aldehyde, 2,4-heptadienal, 1-octene-3-ol, and 2-octen-1-ol and decreased the contents of 3. 6-nadien-1-ol, 3-octanone, and 2-undecanone, suggesting that HHP might inhibit the fishiness of oyster and showed a positive effect on its flavor. Based on the above results, HHP improved the edible qualities such as texture properties and volatile flavor of oysters. This meets the requirements of consumers on the edible quality of seafood and provides new ideas for the development of seafood.     

Bioaccessibility of Antioxidants in Prickly Pear Fruits Treated with High Hydrostatic Pressure: An Application for Healthier Foods

High hydrostatic pressure (HHP) is a commercial processing technology which can enhance the health potential of foods by improving the bioaccessibility of their bioactive compounds. Our aim was to study the bioaccessibility and digestive stability of phenolic compounds and betalains in prickly pear fruits (Opuntia ficus-indica L. Mill. var. Pelota and Sanguinos) treated with HHP (100, 350, and 600 MPa; come-up time and 5 min). The effects of HHP on pulps (edible fraction) and peels (sources of potential healthy ingredients) were assessed. In pulps, betanin bioaccessibility increased (+47% to +64%) when treated at 350 MPa/5 min. In HHP-treated pulps, increases in the bioaccessibility of piscidic acid (+67% to +176%) and 4-hydroxybenzoic acid glycoside (+126% to 136%) were also observed. Isorhamnetin glycosides in peels treated at 600 MPa/CUT had higher bioaccessibility (+17% to +126%) than their controls. The effects of HHP on the bioaccessibility of health-promoting compounds are not exclusively governed by extractability increases of antioxidants in the food matrix (direct effects). In this work we found evidence that indirect effects (effects on the food matrix) could also play a role in the increased bioaccessibility of antioxidants in fruits treated with HHP.     

Positive Influences of Ohmicsonication on Phytochemical Profile and Storage Stability of Not-from-Concentrate Mango Juice

Processing technique and storage conditions are the main factors that affect the phytochemical profile of Not-from-Concentrate (NFC) juice, which could decrease the nutritional and bioactive properties of the corresponding juice. The aim of this study was to evaluate the quality changes that occurred in NFC mango juice after Ohmicsonication (OS) and during storage in comparison to other processing methods such as sonication (S), thermosonication (TS), ohmic heating (OH), and conventional heating (CH). Quality attributes such as polyphenoloxidase (PPO) and pectinmethylesterase (PME) activities, ascorbic acid and hydroxymethyl furfural (HMF) contents, total phenolics, total flavonoids, total carotenoids, electric conductivity, color values and microbial load (total plate count, mold, yeast, and psychrophilic bacteria) were examined. OS and OH treatments demonstrated the highest inactivation of PPO (100%), while CH and TS displaying inhibitions 89% and 90%, respectively and only S treatment exhibited insufficient inactivation of both PPO and microbial load. However, the inhibition of PME followed the order OS (96.5%) > OH (94.9%) > TS (92.5%) > CH (88.5%). The best treatment, with the highest retention of phytochemical contents (ascorbic acid, total carotenoids, antioxidant activity, total flavonoids, and total phenolic content) for NFC mango juice and during storage was obtained with OS treated samples compared to other treatments (in the order from the lowest to highest percentage, OS < OH < TS < CH). Consequently, the results indicated that OS could be applied as a new mild thermal treatment in the production of mango juice with improved quality properties of stored NFC mango juice.     

Effect of PPO‐g‐MA on structures and properties of PPO/PA6/short glass fiber composites

Poly(2,6‐dimethyl‐1,4‐phenylene oxide)/polyamide 6 (PPO/PA6) blends were reactively compatibilized by maleic anhydride (MA) grafted PPO (PPO‐g‐MA) and reinforced by short glass fibers (SGF) via melt extrusion. An observation of the SGF‐polymer interface by scanning electronic microscope (SEM) together with etching techniques indicated that the PPO‐g‐MA played a decisive role in the adhesion of polymers to SGF. The rheological behavior was investigated by capillary rheometer, and the addition of PPO‐g‐MA, and SGF could increase the viscosity of the PPO/PA6 blends. The analysis of fiber orientation and distribution in the PPO/PA6/SGF composites showed PPO‐g‐MA favored to the random dispersion of SGF. The statistic analysis of SGF length showed that PPO‐g‐MA was helpful to maintain the fiber length during melt‐processing. For the composites at a given SGF content of 30 wt %, the addition of PPO‐g‐MA increased the tensile strength from 59.4 MPa to 97.1 MPa and increased SGF efficiency factor from 0.028 to 0.132. The experimental data were consistent with the theoretical predictions of the extension of Kelly‐Tyson model for tensile strength. The fracture toughness of the composites was investigated by single edge notch three‐point bending test. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 2188–2197, 2009     

Effect of Different Sterilization Methods on the Microbial and Physicochemical Changes in Prunus mume Juice during Storage

This study evaluated the pasteurization (P), ozone (O₃), ultrasonic (US), and high-hydrostatic-pressure (HHP) sterilization approaches for processing of Prunus mume regarding browning factors and microorganisms, compared with non-sterilization (control check, CK) treatment. The microorganisms (total bacterial count and fungi and yeast count) in the juice were identified after different sterilization techniques, while the quality parameter changes (degree of browning, color measurements, total phenolic content, reducing sugar, ascorbic acid, 5-hydroxymethyl furaldehyde (5-HMF), amino acid nitrogen, total soluble solids (TSS), pH value) were investigated. The results indicate that P and HHP treatment reduced non-enzymatic browning while substantially impacting the color measurements, TSS, and pH, while the sterilization effect was remarkable, with a rate exceeding 90%. Furthermore, the Prunus mume juices treated with P and HHP sterilization were used as the objects, and the CK group was used as the control group. They were placed at 4 °C, 25 °C and 37 °C, respectively, and stored in dark for 15 d. Sampling and determination were carried out on 0, 3, 6, 9, 12, and 15 d, respectively. M-&-Y (molds and yeasts) were not detected in the late storage period, and no obvious microbial growth was observed during storage, indicating that P and HHP treatments could ensure the microbial safety of Prunus mume juice. P- and HHP- treated Prunus mume juice has better quality and low temperature storage is beneficial for maintaining the quality of Prunus mume juice. Therefore, P treatment or HHP treatment combined with low temperature storage could achieve a more ideal storage effect. Overall, this study conclusively established that P and HHP methods were suitable for sterilizing Prunus mume juice. These techniques minimally affected overall product quality while better maintaining the quality parameters than the untreated juice samples and those exposed to O₃ and US treatment.     

Synthesis, surface and aggregation properties of a series of amphiphilic dendritic copolymers

With 3.0 G polyamidoamine (PAMAM) as initiator and poly (propylene oxide) (PPO)–poly (ethylene oxide) (PEO) blocks as branches, a new class of amphiphilic copolymers were synthesized. The critical micelle concentration (CMC) and γ_CMC (surface tension at CMC) values were determined by surface tension measurement, and the result showed that they both decrease with the increase of amphiphilic branch length. The turbidity properties were investigated and it was found that the cloud point (CP) temperature decreases as the PEO block length increases. Freeze-fracture transmission electron microscopy (FF-TEM) results exhibited spherical shape of aggregates with the most probable distribution size of around 100 nm, which agrees with the results of the dynamic light scattering (DLS). Moreover, the relationship between PPO block length and the activity and CP properties was discussed.     

Impact of High-Pressure Homogenization on the Cell Integrity of Tetradesmus obliquus and Seed Germination

Microalgae have almost unlimited applications due to their versatility and robustness to grow in different environmental conditions, their biodiversity and variety of valuable bioactive compounds. Wastewater can be used as a low-cost and readily available medium for microalgae, while the latter removes the pollutants to produce clean water. Nevertheless, since the most valuable metabolites are mainly located inside the microalga cell, their release implies rupturing the cell wall. In this study, Tetradesmus obliquus grown in 5% piggery effluent was disrupted using high-pressure homogenization (HPH). Effects of HPH pressure (100, 300, and 600 bar) and cycles (1, 2 and 3) were tested on the membrane integrity and evaluated using flow cytometry and microscopy. In addition, wheat seed germination trials were carried out using the biomass at different conditions. Increased HPH pressure or number of cycles led to more cell disruption (75% at 600 bar and 3 cycles). However, the highest increase in wheat germination and growth (40–45%) was observed at the lowest pressure (100 bar), where only 46% of the microalga cells were permeabilised, but not disrupted. Non-treated T. obliquus cultures also revealed an enhancing effect on root and shoot length (up to 40%). The filtrate of the initial culture also promoted shoot development compared to water (21%), reinforcing the full use of all the process fractions. Thus, piggery wastewater can be used to produce microalgae biomass, and mild HPH conditions can promote cell permeabilization to release sufficient amounts of bioactive compounds with the ability to enhance plant germination and growth, converting an economic and environmental concern into environmentally sustainable applications.     

Phase structure and mechanical properties of modified poly(phenylene oxide) with high fluidity

Polyphenylene oxide (PPO) possesses excellent mechanical properties and heat resistance but extremely high viscosity. Virgin PPO has to be blended with polystyrene (PS) to reduce the viscosity. However, PS is miscible with PPO; it reduces not only the viscosity but also the heat distortion temperature and, consequently, narrows the applications. This paper is an attempt to develop crystalline additives that will dissolve in PPO at processing temperature but precipitate and recrystallize after molding. Thereby, the additives are able to reduce the viscosity of PPO melts but will not reduce the heat distortion temperature of PPO materials. In the present work, a PPO was compounded with bisphenol‐A and bisphenol‐S as well as PS separately on Haake Rheometer and the mixing torque was recorded. The dynamic properties of the modified PPO were analyzed with DMA and the mechanical properties were tested at ambient and elevated temperatures. The phase structures were examined with DSC and TEM. The effect of the additives on the fluidity, mechanical properties, and heat distortion temperature of the PPO compounds was investigated. All three additives dissolved in the PPO during mixing and reduced the mixing torque. But bisphenol‐S precipitated after molding and is present as 40 nm crystalline phases in the molded materials; it did not affect the glass transition nor did it deteriorate the performance at elevated temperature. While bisphenol‐A did not recrystallize after molding; it reduced the T_g and heat distortion temperature as does PS. General principles about such plasticizers with phase transition for PPO were proposed. Copyright © 2011 John Wiley & Sons, Ltd.     

High Hydrostatic Pressure to Increase the Biosynthesis and Extraction of Phenolic Compounds in Food: A Review

Phenolic compounds from fruits and vegetables have shown antioxidant, anticancer, anti-inflammatory, among other beneficial properties for human health. All these benefits have motivated multiple studies about preserving, extracting, and even increasing the concentration of these compounds in foods. A diverse group of vegetable products treated with High Hydrostatic Pressure (HHP) at different pressure and time have shown higher phenolic content than their untreated counterparts. The increments have been associated with an improvement in their extraction from cellular tissues and even with the activation of the biosynthetic pathway for their production. The application of HHP from 500 to 600 MPa, has been shown to cause cell wall disruption facilitating the release of phenolic compounds from cell compartments. HPP treatments ranging from 15 to 100 MPa during 10–20 min at room temperature have produced changes in phenolic biosynthesis with increments up to 155%. This review analyzes the use of HHP as a method to increase the phenolic content in vegetable systems. Phenolic content changes are associated with either an immediate stress response, with a consequent improvement in their extraction from cellular tissues, or a late stress response that activates the biosynthetic pathways of phenolics in plants.     

Retrogradation characteristics of high hydrostatic pressure processed corn and wheat starch

High hydrostatic pressure (HHP) has been investigated as an alternative to thermal processing for food preservation. HHP has been known to affect high molecular weight polymers causing phase change. Starch is gelatinized at a pressure on the order of 600–700 MPa, at 25 °C. Gelatinized starch recrystallizes during storage affecting the texture and shelf life of food products. The effect of HHP processing on the crystallization of starches from different botanical origins during storage at 4 and 23 °C was investigated. Crystallization kinetics of HHP treated wheat and corn starch gels were compared using DSC. The effect of crystallization on structure was evaluated in terms of storage modulus. The rate of retrogradation depended on the storage temperature (23 °C and 4 °C) and the botanical origin of the starch. The least crystallization was observed in HHP treated wheat starch stored at 23 °C. The storage modulus increased with crystallization of starch.     

Extraction of Pectin from Satsuma Mandarin Peel: A Comparison of High Hydrostatic Pressure and Conventional Extractions in Different Acids

Satsuma mandarin peel pectin was extracted by high hydrostatic pressure-assisted citric acid (HHPCP) or hydrochloric acid (HHPHP), and the physiochemical, structural, rheological and emulsifying characteristics were compared to those from conventional citric acid (CCP) and hydrochloric acid (CHP). Results showed that HHP and citric acid could both increase the pectin yield, and HHPCP had the highest yield (18.99%). Structural characterization, including NMR and FTIR, demonstrated that HHPHP showed higher Mw than the other pectins. The viscosity of the pectin treated with HHP was higher than that obtained with the conventional method, with HHPHP exhibiting significantly higher viscosity. Interestingly, all the pectin emulsions showed small particle mean diameters (D_4,3 being 0.2–1.3 μm) and extremely good emulsifying stability with centrifugation and 30-day storage assays, all being 100%. Satsuma mandarin peel could become a highly promising pectin source with good emulsifying properties, and HHP-assisted acid could be a more efficient method for pectin extraction.     

Evaluation of Innovative Dried Purée from Jerusalem Artichoke—In Vitro Studies of Its Physicochemical and Health-Promoting Properties

The present study aimed to evaluate the effect of Jerusalem artichoke processing methods and drying methods (freeze drying, sublimation drying, vacuum drying) on the basic physicochemical parameters, profiles and contents of sugars and polyphenolic compounds, and health-promoting properties (antioxidant activity, inhibition of the activities of α-amylase, α-glucosidase, and pancreatic lipase) of the produced purée. A total of 25 polyphenolic compounds belonging to hydroxycinnamic phenolic acids (LC-PDA-MS-QTof) were detected in Jerusalem artichoke purée. Their average content in the raw material was at 820 mg/100 g dm (UPLC-PDA-FL) and was 2.7 times higher than in the cooked material. The chemical composition and the health-promoting value of the purées were affected by the drying method, with the most beneficial values of the evaluated parameters obtained upon freeze drying. Vacuum drying could offer an alternative to freeze drying, as both methods ensured relatively comparable values of the assessed parameters.     

Solubility of α-amino acids in water under high pressure: glycine, -alanine, -valine, -leucine, and -isoleucine

The solubility of glycine, -alanine, -valine, -leucine, and -isoleucine in water was measured at 298.15 K and pressures up to 400 MPa. The standard deviation of the logarithm of the solubility is 0.001–0.003, equal to or better than the accuracy of atmospheric pressure measurement in the literature (0.001–0.05). A variety of solubility phenomena were observed. The solubility of glycine decreased with increasing pressure, whereas that of -alanine increased. The -valine and -isoleucine have a solubility maximum at around 100 MPa, and -leucine seems to exhibit a solid-phase phase transition at around 200 MPa. Pressure coefficient of the solubilities at 0.10 MPa is compared with that thermodynamically estimated in reference to aqueous density measurements of glycine and -alanine at 298.15 K and 0.10 MPa, supporting a reliability of our high-pressure measurements.     

Effect of homogenization (microfluidization) process parameters in mechanical production of micro- and nanofibrillated cellulose on its rheological and morphological properties

The rheological properties of microfibrillated cellulose (MFC)/nanofibrillated cellulose (NFC) suspensions have an important role during processing and mixing. In this work, the process parameters for MFC/NFC production within a microfluidizer (i.e., the size of interaction chamber and number of passes) were varied to investigate the influences on morphology, zeta potential, chemical properties and rheological features including viscosity, creep, strain recovery and yield stress behavior. The stability and appropriate viscosity of the fiber suspensions can be controlled by optimizing the processing conditions, resulting in a reduction in fiber diameter and most negative zeta potential value. The viscosity increased with higher amount of fibrillation by using a smaller chamber or higher number of passes, but intermediate plateau values are characteristic for temporary aggregation and breaking-up of the fiber network. The creep response and yield stress have been described by parameters of the Burger model and Herschel–Bulkley model, respectively, showing a more prominent effect on yield stress of chamber size than number of passes. The network formation leads to lower creep compliance and step-like strain recovery. The transition from gel-like to liquid-like behavior as characterized by the dynamic yield point at a specific strain, is almost independent of the processing conditions. Most important, the total number of passes applied in production can be directly related to the rotational Péclet number, which combines rheological and morphological data.     

Antioxidant,Antimicrobial, and Metabolomic Characterization of Blanched Pomegranate Peel Extracts: Effect of Cultivar

Hot water blanching at 80 °C for 3 min can be used as a novel pre-treatment step in pomegranate peel to preserve the integrity of the phytochemical content within the peel extracts by lowering or inactivating enzymes such as polyphenol (PPO) oxidase and peroxidase (POD) that are responsible for the break-down of phytochemicals within the peel. The aim of this study was to investigate the effect of hot water blanching pre-treatment on yield, bioactive compounds, antioxidants, enzyme inactivation, and antibacterial activity of ‘Wonderful’, ‘Acco’, and ‘Herskawitz’ pomegranate peel extracts. We used a variety of spectrophotometric-based assays and liquid chromatography mass spectrometry (LC-MS)-based approach to characterize and quantify metabolites within the peel extracts. Blanching significantly (p < 0.05) reduced PPO activity in all peel extracts, with the highest PPO reduction in ‘Herskawitz’ peel extracts at 0.25 U/mL. Furthermore, higher antioxidant activity in ‘Herskawitz’ blanched peel extracts using 2,2-diphenyl-1-picryl hydrazyl (DPPH) antioxidant activity, ferric ion reducing antioxidant power (FRAP), and 2,2-azino-bis(3-ethylbenzothiazoline-6-sulphonic acid (ABTS) radical scavenging activity at 567.78 ± 9.47 µmol Trolox/g DM, 800.05 ± 1.60 µmol Trolox/g DM, and 915.27 ± 0.61 µmol Trolox/g DM, respectively, was noted. ‘Herskawitz’ blanched peel extracts were recorded with the lowest minimum inhibitory concentration (MIC) value of 80 µg/mL for Gram-positive Bacillus subtilis and Gram-negative Klebsiella pneumoniae bacteria strains. A total of 30 metabolites were present in ‘Acco’ and ‘Herskawitz’ peel extracts and were tentatively identified after LC-MS profiling. This study demonstrates that blanched peel extracts from ‘Herskawitz’ cultivar have great potential for commercial use in value-added products in the nutraceutical, cosmeceutical, and pharmacological industries.     

Properties of Banana (Cavendish spp.) Starch Film Incorporated with Banana Peel Extract and Its Application

The objective of this study was to develop an active banana starch film (BSF) incorporated with banana peel extract. We compared the film’s properties with commercial wrap film (polyvinyl chloride; PVC). Moreover, a comparison of the quality of minced pork wrapped during refrigerated storage (7 days at ±4 °C) was also performed. The BSF with different concentrations of banana peel extract (0, 1, 3, and 5 (%, w/v)) showed low mechanical properties (tensile strength (TS): 4.43–31.20 MPa and elongation at break (EAB): 9.66–15.63%) and water vapor permeability (3.74–11.0 × 10⁻¹⁰ g mm/sm² Pa). The BSF showed low film solubility (26–41%), but excellent barrier properties to UV light. The BSF had a thickness range of 0.030–0.047 mm, and color attributes were: L* = 49.6–51.1, a* = 0.21–0.43, b* = 1.26–1.49. The BSF incorporated with banana peel extracts 5 (%, w/v) showed the highest radical scavenging activity (97.9%) and inhibitory activity of E. coli O157: H7. The BSF showed some properties comparable to the commercial PVC wrap film. Changes in qualities of minced pork were determined for 7 days during storage at ±4 °C. It was found that thiobarbituric acid reactive substances (TBARS) of the sample wrapped with the BSF decreased compared to that wrapped with the PVC. The successful inhibition of lipid oxidation in the minced pork was possible with the BSF. The BSF incorporated with banana peel extract could maintain the quality of minced pork in terms of oxidation retardation.     

Valorization of a By-Product from the Production of Mechanically Deboned Chicken Meat for Preparation of Gelatins

In recent decades, food waste management has become a key priority of industrial and food companies, state authorities and consumers as well. The paper describes the biotechnological processing of mechanically deboned chicken meat (MDCM) by-product, rich in collagen, into gelatins. A factorial design at two levels was used to study three selected process conditions (enzyme conditioning time, gelatin extraction temperature and gelatin extraction time). The efficiency of the technological process of valorization of MDCM by-product into gelatins was evaluated by % conversion of the by-product into gelatins and some qualitative parameters of gelatins (gel strength, viscosity and ash content). Under optimal processing conditions (48–72 h of enzyme conditioning time, 73–78 °C gelatin extraction temperature and 100–150 min gelatin extraction time), MDCM by-product can be processed with 30–32% efficiency into gelatins with a gel strength of 140 Bloom, a viscosity of 2.5 mPa.s and an ash content of 5.0% (which can be reduced by deionization using ion-exchange resins). MDCM is a promising food by-product for valorization into gelatins, which have potential applications in food-, pharmaceutical- and cosmetic fields. The presented technology contributes not only to food sustainability but also to the model of a circular economy.