液晶聚合物网络研究进展

综述了液晶聚合物网络的新进展。包括液晶热固体、液晶弹性体和液晶互穿网络。介绍了各种网络的合成、主要性能和应用前景。     

Control over Internal Structure of Liquid Crystal Polymer Nanofibers by Electrospinning

Liquid crystal polymer nanofibers with a diameter ranging from 0.13 to 4.71 µm were prepared by electrospinning from a main‐chain liquid crystalline polyester, BB‐5(3‐Me). WAXD measurements showed that the formation and orientation of the ordered structure in the electrospun fibers were controlled by the fiber diameter formed during electrospinning. For BB‐5(3‐Me), the SmA structure with two layer spacings was formed in the fiber during the electrospinning. Under optimal spinning conditions, the SmA structure is highly oriented in the fiber. In addition, annealing transformed the metastable SmA structure in the BB‐5(3‐Me) fiber into stable SmCA one.

     

无柔性间隔基侧链型液晶高分子复合定形相变材料的制备与性能研究

设计合成了一系列具有不同烷氧基尾链长度的单体4′-烷氧基-4-联苯酚甲基丙烯酸酯Mbi Cm(m=1,2,4,6,8,10,12,14,16,18),通过自由基聚合方法合成了相应的具有不同烷氧基尾链长度的无柔性间隔基侧链型液晶高分子PMbi Cm,将所得的侧链型液晶高分子和相变材料石蜡按一定质量比混合,通过"加热-冷却法"成功制备了定形相变材料.通过凝胶测试发现当尾链长度为m=12,14,16,18时,高分子对固体石蜡具有良好的凝胶定形效果,且随着烷氧基尾链的增长,聚合物和石蜡的相容性增加,最低凝胶浓度降低,得到定形相变材料的凝胶解缔温度也相应下降.通过示差扫描量热法(DSC)、热重分析法(TG)、流变(Rheology)等测试考察了定形相变材料的相变储能性能、热稳定性和流变性能,实验结果表明该定形相变材料具有相变焓值高、热稳定性好、凝胶强度高等优点.通过红外光谱(FTIR)、偏光显微镜(POM)和扫描电镜(SEM)等测试发现PMbi Cm通过非共价键作用力自聚集形成三维凝胶网络结构,对石蜡起固定支撑作用.     

Alcohol Selective Optical Sensor Based on Porous Cholesteric Liquid Crystal Polymer Networks

A responsive hydrogen-bonded cholesteric liquid crystal polymer (CLCP) film with controlled porosity was fabricated as an optical sensor to distinguish between methanol and ethanol in alcohol solutions. To facilitate responding the alcohols, porosity was generated by removing the nonreactive liquid crystal agent, and the hydrogen bridges of CLCP were broken. The sensitivities of CLCPs to ethanol and methanol were obtained by monitoring the wavelength shifts of the transmission spectrum at different alcohol concentrations and ratios of methanol/ethanol. Changes in the central wavelength of the CLCP network transmission spectrum allowed the methanol–ethanol ratio to be discriminated. A linear relationship between wavelength shift of CLCP networks and alcohol concentration was obtained experimentally, and the sensor characteristics were explored. The sensitivities of the CLCPs were 1.35 and 0.18 nm/% to ethanol and methanol, respectively. The sensing sensitivity of cholesteric networks to alcohol molecules increased as the methanol–ethanol ratio declined. Therefore, CLCP could act as a stimuli-responsive material to distinguish the concentrations of acetone and ethanol in mixed solutions. Furthermore, the impact of UV intensity for curing a CLC mixture on the sensing sensitivity to the different alcohol concentrations was also studied. The higher UV intensity could enhance the sensitivity to alcohol molecules and distinguishing ability between methanol and ethanol.     

侧链液晶聚合物相转变点的分子动力学模拟

液晶基本上可分为３类：向列型液晶、近晶型液晶和胆甾型液晶［１］．液晶材料的相转变温度的预测对选择和设计液晶材料具有非常重要的作用．本文用分子动力学模拟法对聚［ω－（４′－甲氧基联苯－４－氧基）己基］甲基丙烯酸酯（ＰＭ６ＭＰＰ）单链分子进行了研究,模拟...     

柔性高分子/小分子液晶混合物的自洽场理论

发展了柔性高分子/小分子液晶混合物连续自洽场理论，将小分子液晶模型化 为取向与位置无关的单体分子，小分子液晶间存在各向异性的Maier-Saupe相互作 用，该理论可还原成高分子和各向同性小分子组成的Flory-Huggins溶液理论和纯 液晶的Maier-Squpe液晶理论，通过数值解自洽场方程组，还将理论用于研究柔性 高分子/小分子液晶混合物相分离开界面性质，得到的结果与用Helfand格子界面理 论和MOnte Carlo模拟的结果一致。     

Polymer Membranes Dispersed Liquid Crystal (PMDLC): a new electro-optical device

Polymer Dispersed Liquid Crystals (PDLCs) are liquid crystal dispersions in a polymer matrix, which look like opaque in their OFF state, when no electric field is applied, and transparent in their ON state. They are generally obtained by a phase separation process, such as Thermal, Solvent- and Polymerization-Induced Phase Separation (TIPS, SIPS and PIPS, respectively), between two transparent conductive glass substrates. In this paper, a new electro-optical device, formed by a porous polymer membrane imbibed with liquid crystal by capillary suction, is presented (Polymer Membranes Dispersed Liquid Crystals, PMDLC). Polymer membrane surfaces were made conductive before liquid crystal loading by magnetron sputtering of a thin layer of conductive indium tin oxide. The morphology and the electro-optical response of these devices were investigated and the observed transmittances and relaxation times were found to be similar to those of conventional PDLCs. In addition, PMDLCs showed interesting flexibility as no solid conductive substrate is required and economic convenience as there is no loss of liquid crystal in the polymer matrix.     

聚合物分散液晶膜

聚合物分散液晶膜是将液晶和聚合物结合,得到的一种综合性能优异的膜材料,液晶分子赋予了聚合物分散液晶膜显著的电光特性,使其受到了广泛的研究,并有着广阔的应用前景。而聚合物作为成膜材料,起着辅助但是重要的作用,其结构和固化过程是影响聚合物分散液晶膜电光特性的重要因素。本文简要综述了聚合物分散液晶膜的制备方法、电光特性的影响因素及研究手段。     

侧链液晶高分子的非线性光学特征及其应用

阐述了侧链高分子液晶非线性光学的基本原理,着重讨论了影响非线性光学特征的几个基本因素,说明了双折射与外场强度、双折射与序参数之间的定量关系,展望了侧链高分子液晶非线性光学特征在一些领域中的应用前景。     

聚合物分散液晶PMMA-5CB的制备及电光性能

以聚合引发相分离的方法制备了聚甲基丙烯酸甲酯(PMMA)基聚合物分散液晶(PDLC).通过差示量热扫描仪(DSC)、偏光显微镜(POM)对不同液晶5CB(4-氰基-4'-戊基联苯)含量的PDLC热力学行为和液晶分散状态进行了表征.在电压为0～30 V、波长为633 nm处,用紫外可见分光光度计(UV-Vis)对PDLC的电光性能进行了研究.结果表明当w(5CB)达到20%以上时,PDLC发生相分离现象;当w(5CB)=30%时,液晶的分散状态最佳,电光效应最强.     

Liquid Crystal Elastomer Actuators from Anisotropic Porous Polymer Template

Controlling self‐assembly behaviors of liquid crystals is a fundamental issue for designing them as intelligent actuators. Here, anisotropic porous polyvinylidene fluoride film is utilized as a template to induce homogeneous alignment of liquid crystals. The mechanism of liquid crystal alignment induced by anisotropic porous polyvinylidene fluoride film is illustrated based on the relationship between the alignment behavior of liquid crystals and surface microstructure of anisotropic polyvinylidene fluoride film. Liquid crystal elastomer actuators with fast responsiveness, large strain change, and reversible actuation behaviors are achieved by the photopolymerization of liquid crystal monomer in liquid crystal cells coated with anisotropic porous films.

     

Stable and Oriented Liquid Crystal Droplets Stabilized by Imidazolium Ionic Liquids

Liquid crystals represent a fascinating intermediate state of matter, with dynamic yet organized molecular features and untapped opportunities in sensing. Several works report the use of liquid crystal droplets formed by microfluidics and stabilized by surfactants such as sodium dodecyl sulfate (SDS). In this work, we explore, for the first time, the potential of surface-active ionic liquids of the imidazolium family as surfactants to generate in high yield, stable and oriented liquid crystal droplets. Our results show that [C₁₂MIM][Cl], in particular, yields stable, uniform and monodisperse droplets (diameter 74 ± 6 µm; PDI = 8%) with the liquid crystal in a radial configuration, even when compared with the standard SDS surfactant. These findings reveal an additional application for ionic liquids in the field of soft matter.     

Electro-Optical Characteristics of Polymer Dispersed Liquid Crystal Doped with MgO Nanoparticles

In this paper, inorganic oxide MgO nanoparticles-doped polymer dispersed liquid crystal (PDLC) films were made from a mixture of the prepolymer, SLC1717 liquid crystal, and MgO nanoparticles by the polymerization induced phase separation (PIPS) process. To observe the effect of MgO concentration, PDLC was dispersed with 0.2, 0.4, 0.6, and 0.8 wt.% MgO. Electro-optical properties of the films have been investigated using LCD parameter meter and Scanning Electron Microscope (SEM) at room temperature. It is established that MgO nanoparticles affect the microstructure of PDLC films significantly because of the formed agglomerates of MgO nanoparticles. Results show an improvement in the electro-optical properties and a decrease in the driving voltage for doped systems with MgO nanoparticles. When the doping amount of MgO is 0.8 wt.%, the threshold voltage (V_th) is reduced to about 7.5 V. Therefore, MgO-doped PDLC is expected to become an excellent choice in the field of energy-saving.     

新型侧链液晶聚甲基丙烯酸酯研究

以横向取代的液晶基元为侧基合成了聚甲基丙烯酸酯,并对此聚合物进行初步表征.在玻璃化温度(170℃)以上样品进入液晶态.样品较高的玻璃化温度以及能形成液晶态的特性被认为是棒状液晶基元使聚合物分子链刚性化的结果.     

耗散型石英晶体微天平在生物医用高分子材料中的应用

石英晶体微天平(QCM)是一种基于石英晶体压电效应的分析检测技术,可实时在线提供石英晶体表面吸附层质量、厚度、粘弹性等信息,由此获得表面分子相互作用关系。 耗散型石英晶体微天平(QCM-D)因其独特的对粘弹性的解析,使其在高分子材料中的应用迅速发展,尤其是生物医用高分子材料领域,已用来评价生物医用高分子材料的表界面相互作用,力学和生物相容性等。 本文简单介绍了耗散型石英晶体微天平的基本原理及理论模型,重点综述了近几年QCM-D在高分子链构象、蛋白质吸附、生物大分子相互作用、药物释放以及水凝胶中的应用,并且展望了QCM-D的未来发展趋势。     

Airbrush Formation of Liquid Crystal/Polymer Fibers

A homogeneous solution of a low‐molecular‐weight liquid crystal and a polymer spontaneously phase separates during airbrushing to form uniform fibers with a fluid liquid‐crystal core surrounded by a solid polymer sheath. This structure forms because it effectively minimizes the interfacial energy of the phase‐separated components while minimizing the elastic energy of the liquid‐crystal core. These fibers incorporate the sensitive stimuli response of liquid crystals while maintaining the structural integrity, flexibility, and large surface‐area‐to‐volume ratios inherent in fibers. We demonstrate the electro‐ and thermo‐optical response of the resulting fibers. They may find use as biological and chemical sensors. The resulting fibers have the potential to shape the future of flexible/wearable electronics and sensors.     

主链型热致性液晶高分子芳香共聚酯的红外光谱研究

本文用傅里叶红外光谱法结合变温方法和偏振技术研究了主链型芳香共聚酯热致性高分子液晶。测定了光谱的变温性质以及液晶的有序度参数。结果表明分子链中液晶基元上苯环之间的相互作用在液晶相形成过程中起重要作用。液晶有序度参数与Roca和Yoon的理论值相一致。     

聚丙烯酸酯侧链液晶聚合物的合成与表征

以对羟基苯甲酸、氯乙醇和丙烯酸为主要原料,经醚化、酯化和酰氯化反应合成了中间体和含液晶基元的丙烯酸酯单体,后者经自由基聚合合成了聚丙烯酸酯侧链液晶聚合物。用偏光显微镜观察了单体和聚合物的织态结构,用DSC和IR对聚合物进行了表征。结果表明,单体和聚合物均呈现向列型液晶织态结构,聚合物在较宽的温度范围内有很好的液晶性。     

Synthesis and Crystal Structure of a Co（II） Coordination Polymer Derived from a Flexible Bipyridyl Derivative Ligand

1 INTRODUCTION The infinite networks constructed from transition metal complexes have attracted considerable current interest in recent years. The motivation behind this activity has been stimulated by their potential appli- cations in selective inclusion of ions, molecular re- cognition, host-guest chemistry, ion exchange, cata- lysis, electrical conductivity, magnetism, optics and so on[1～4]. It is well known that the diversity in structures and topologies of supramolecules is attri- b…     

Chiral,Thermally Irreversible and Quasi-Stealth Photochromic Dopant to Control Selective Reflection Wavelength of Cholesteric Liquid Crystal

A chiral and thermally irreversible photochromic fulgide derivative incorporating an (R)-binaphthol unit in its acid anhydride moiety was used for the photoswitching of the pitch length of cholesteric liquid crystals. Since the absorption maximum wavelengths of both thermally stable photoisomers are nearly in the UV region (quasi-stealth photochromism), it can be exposed to visible light without inducing photochromic reactions. Therefore, when the photoswitching molecule is added to a permanent cholesteric liquid crystal whose reflection light wavelength is in the visible region, the UV light-induced photochromic reaction of the photoswitching molecule changes the wavelength of the reflection light in the visible light region. We have succeeded in regulating the color of cholesteric liquid crystalline cells between red and blue upon UV light irradiation. Attempts to introduce this system in polymer dispersed cholesteric liquid crystals are also described.