Identification of the Primary Structure of Selenium-Containing Polysaccharides Selectively Inhibiting T-Cell Proliferation

We previously described the biosynthesis, isolation, and immunosuppressive activity of the selenium-containing polysaccharide fraction isolated from the mycelial culture of Lentinula edodes. Structural studies have shown that the fraction was a protein-containing mixture of high molar mass polysaccharides α- and β-glucans. However, which of the components of the complex fraction is responsible for the immunosuppressive activity non-typical for polysaccharides of fungal origin has not been explained. In the current study, we defined four-polysaccharide components of the Se-containing polysaccharide fraction determined their primary structure and examined the effect on T- and B-cell proliferation. The isolated Se-polysaccharides, α-1,4-glucan (M_w 2.25 × 10⁶ g/mol), unbranched β-1,6-d-glucan, unbranched β-1,3-d-glucan and β-1,3-branched β-1,6-d-glucan (M_w 1.10 × 10⁵ g/mol), are not typical as components of the cell wall of L. edodes. All are biologically active, but the inhibitory effect of the isolated polysaccharides on lymphocyte proliferation was weaker, though more selective than that of the crude fraction.     

Solubility and Thermodynamic Data of Febuxostat in Various Mono Solvents at Different Temperatures

This study examines the solubility and thermodynamics of febuxostat (FBX) in a variety of mono solvents, including “water, methanol (MeOH), ethanol (EtOH), isopropanol (IPA), 1-butanol (1-BuOH), 2-butanol (2-BuOH), ethylene glycol (EG), propylene glycol (PG), polyethylene glycol-400 (PEG-400), ethyl acetate (EA), Transcutol-HP (THP), and dimethyl sulfoxide (DMSO)” at 298.2–318.2 K and 101.1 kPa. The solubility of FBX was determined using a shake flask method and correlated with “van’t Hoff, Buchowski-Ksiazczak λh, and Apelblat models”. The overall error values for van’t Hoff, Buchowski-Ksiazczak λh, and Apelblat models was recorded to be 1.60, 2.86, and 1.14%, respectively. The maximum mole fraction solubility of FBX was 3.06 × 10⁻² in PEG-400 at 318.2 K, however the least one was 1.97 × 10⁻⁷ in water at 298.2 K. The FBX solubility increased with temperature and the order followed in different mono solvents was PEG-400 (3.06 × 10⁻²) > THP (1.70 × 10⁻²) > 2-BuOH (1.38 × 10⁻²) > 1-BuOH (1.37 × 10⁻²) > IPA (1.10 × 10⁻²) > EtOH (8.37 × 10⁻³) > EA (8.31 × 10⁻³) > DMSO (7.35 × 10⁻³) > MeOH (3.26 × 10⁻³) > PG (1.88 × 10⁻³) > EG (1.31 × 10⁻³) > water (1.14 × 10⁻⁶) at 318.2 K. Compared to the other combinations of FBX and mono solvents, FBX-PEG-400 had the strongest solute-solvent interactions. The apparent thermodynamic analysis revealed that FBX dissolution was “endothermic and entropy-driven” in all mono solvents investigated. Based on these findings, PEG-400 appears to be the optimal co-solvent for FBX solubility.     

Thermodynamic Solubility Profile of Temozolomide in Different Commonly Used Pharmaceutical Solvents

The solubility parameters, and solution thermodynamics of temozolomide (TMZ) in 10 frequently used solvents were examined at five different temperatures. The maximum mole fraction solubility of TMZ was ascertained in dimethyl sulfoxide (1.35 × 10⁻²), followed by that in polyethylene glycol-400 (3.32 × 10⁻³) > Transcutol^® (2.89 × 10⁻³) > ethylene glycol (1.64 × 10⁻³) > propylene glycol (1.47 × 10⁻³) > H₂O (7.70 × 10⁻⁴) > ethyl acetate (5.44 × 10⁻⁴) > ethanol (1.80 × 10⁻⁴) > isopropyl alcohol (1.32 × 10⁻⁴) > 1-butanol (1.07 × 10⁻⁴) at 323.2 K. An analogous pattern was also observed for the other investigated temperatures. The quantitated TMZ solubility values were regressed using Apelblat and Van’t Hoff models and showed overall deviances of 0.96% and 1.33%, respectively. Apparent thermodynamic analysis indicated endothermic, spontaneous, and entropy-driven dissolution of TMZ in all solvents. TMZ solubility data may help to formulate dosage forms, recrystallize, purify, and extract/separate TMZ.     

Solution thermodynamics and preferential solvation of triclocarban in {1,4-dioxane (1) + water (2)} mixtures at 298.15 K

The equilibrium solubility and preferential solvation of triclocarban in {1,4-dioxane (1) + water (2)} mixtures at 298.15 K was reported. Mole fraction solubility varies continuously from 2.85 × 10^–9 in neat water to 2.39 × 10^–3 in neat 1,4-dioxane. Solubility behaviour was adequately correlated by means of the Jouyban-Acree model. Based on the inverse Kirkwood-Buff integrals, preferential solvation parameters were calculated. Triclocarban is preferentially solvated by water in water-rich mixtures (0.00 < x₁ < 0.18) and also in 1,4-dioxane-rich mixtures (0.78 < x₁ < 1.00) but preferentially solvated by 1,4-dioxane in mixtures with similar solvent compositions.     

Ion polarisation-assisted hydrogen-bonded ferroelectrics in liquid crystalline domains

An alkylamide-substituted (−NHCOC₁₀H₂₁) hydrogen-bonded dibenzo[18]crown-6 derivative (1) was prepared to stabilise the ionic channel structure in a discotic hexagonal columnar (Col_h) liquid crystal. The introduction of simple M⁺X⁻ salts such as Na⁺PF₆⁻ and K⁺I⁻ into the ionic channel of 1 enhanced the ionic conductivity of the Col_h phase of the M⁺·(1)·X⁻ salts, with the highest ionic conductivity reaching ∼10⁻⁶ S cm⁻¹ for K⁺·(1)·I⁻ and Na⁺·(1)·PF₆⁻ at 460 K, which was approximately 5 orders of magnitude higher than that of 1. The introduction of non-ferroelectric 1 into the ferroelectric N,N′,N′′-tri(tetradecyl)-1,3,5-benzenetricarboxamide (3BC) elicited a ferroelectric response from the mixed Col_h phase of (3BC)_x(1)_1−x with x = 0.9 and 0.8. The further doping of M⁺X⁻ into the ferroelectric Col_h phase of (3BC)_0.9(1)_0.1 enhanced the ferroelectric polarisation assisted by ion displacement in the half-filled ionic channel for the vacant dibenzo[18]crown-6 of (3BC)_0.9[(M⁺)_0.5·(1)·(X⁻)_0.5]_0.1.

An alkylamide-substituted (−NHCOC₁₀H₂₁) hydrogen-bonded dibenzo[18]crown-6 derivative (1) was prepared to stabilise the ionic channel structure in a discotic hexagonal columnar (Col_h) liquid crystal.     

Solubility Optimization of Loxoprofen as a Nonsteroidal Anti-Inflammatory Drug: Statistical Modeling and Optimization

Industrial-based application of supercritical CO₂ (SCCO₂) has emerged as a promising technology in numerous scientific fields due to offering brilliant advantages, such as simplicity of application, eco-friendliness, and high performance. Loxoprofen sodium (chemical formula C₁₅H₁₈O₃) is known as an efficient nonsteroidal anti-inflammatory drug (NSAID), which has been long propounded as an effective alleviator for various painful disorders like musculoskeletal conditions. Although experimental research plays an important role in obtaining drug solubility in SCCO₂, the emergence of operational disadvantages such as high cost and long-time process duration has motivated the researchers to develop mathematical models based on artificial intelligence (AI) to predict this important parameter. Three distinct models have been used on the data in this work, all of which were based on decision trees: K-nearest neighbors (KNN), NU support vector machine (NU-SVR), and Gaussian process regression (GPR). The data set has two input characteristics, P (pressure) and T (temperature), and a single output, Y = solubility. After implementing and fine-tuning to the hyperparameters of these ensemble models, their performance has been evaluated using a variety of measures. The R-squared scores of all three models are greater than 0.9, however, the RMSE error rates are 1.879 × 10⁻⁴, 7.814 × 10⁻⁵, and 1.664 × 10⁻⁴ for the KNN, NU-SVR, and GPR models, respectively. MAE metrics of 1.116 × 10⁻⁴, 6.197 × 10⁻⁵, and 8.777 × 10⁻⁵errors were also discovered for the KNN, NU-SVR, and GPR models, respectively. A study was also carried out to determine the best quantity of solubility, which can be referred to as the (x₁ = 40.0, x₂ = 338.0, Y = 1.27 × 10⁻³) vector.     

A small-molecule organic ferroelectric with piezoelectric voltage coefficient larger than that of lead zirconate titanate and polyvinylidene difluoride

Piezoelectric materials that generate electricity when deforming are ideal for many implantable medical sensing devices. In modern piezoelectric materials, inorganic ceramics and polymers are two important branches, represented by lead zirconate titanate (PZT) and polyvinylidene difluoride (PVDF). However, PVDF is a nondegradable plastic with poor crystallinity and a large coercive field, and PZT suffers from high sintering temperature and toxic heavy element. Here, we successfully design a metal-free small-molecule ferroelectric, 3,3-difluorocyclobutanammonium hydrochloride ((3,3-DFCBA)Cl), which has high piezoelectric voltage coefficients g₃₃ (437.2 × 10⁻³ V m N⁻¹) and g₃₁ (586.2 × 10⁻³ V m N⁻¹), a large electrostriction coefficient Q₃₃ (about 4.29 m⁴ C⁻²) and low acoustic impedance z₀ (2.25 × 10⁶ kg s⁻¹ m⁻²), significantly outperforming PZT (g₃₃ = 34 × 10⁻³ V m N⁻¹ and z₀ = 2.54 × 10⁷ kg s⁻¹ m⁻²) and PVDF (g₃₃ = 286.7 × 10⁻³ V m N⁻¹, g₃₁ = 185.9 × 10⁻³ V m N⁻¹, Q₃₃ = 1.3 m⁴ C⁻², and z₀ = 3.69 × 10⁶ kg s⁻¹ m⁻²). Such a low acoustic impedance matches that of the body (1.38–1.99 × 10⁶ kg s⁻¹ m⁻²) reasonably well, making it attractive as next-generation biocompatible piezoelectric devices for health monitoring and “disposable” invasive medical ultrasound imaging.

A small-molecule organic ferroelectric (3,3-DFCBA)Cl has high piezoelectric voltage coefficients g₃₃ (437.2 × 10⁻³ V m N⁻¹), a large electrostriction coefficient Q₃₃, and low acoustic impedance z₀, far beyond that of PZT and PVDF.     

Absolute Antioxidant Activity of Five Phenol-Rich Essential Oils

Essential oils (EOs) have promising antioxidant activities which are gaining interest as natural alternatives to synthetic antioxidants in the food and cosmetic industries. However, quantitative data on chain-breaking activity and on the kinetics of peroxyl radical trapping are missing. Five phenol-rich EOs were analyzed by GC-MS and studied by oxygen-uptake kinetics in inhibited controlled autoxidations of reference substrates (cumene and squalene). Terpene-rich Thymus vulgaris (thymol 4%; carvacrol 33.9%), Origanum vulgare, (thymol 0.4%; carvacrol 66.2%) and Satureja hortensis, (thymol 1.7%; carvacrol 46.6%), had apparent k_inh (30 °C, PhCl) of (1.5 ± 0.3) × 10⁴, (1.3 ± 0.1) × 10⁴ and (1.1 ± 0.3) × 10⁴ M⁻¹s⁻¹, respectively, while phenylpropanoid-rich Eugenia caryophyllus (eugenol 80.8%) and Cinnamomum zeylanicum, (eugenol 81.4%) showed apparent k_inh (30 °C, PhCl) of (5.0 ± 0.1) × 10³ and (4.9 ± 0.3) × 10³ M⁻¹s⁻¹, respectively. All EOs already granted good antioxidant protection of cumene at a concentration of 1 ppm (1 mg/L), the duration being proportional to their phenolic content, which dictated their antioxidant behavior. They also afforded excellent protection of squalene after adjusting their concentration (100 mg/L) to account for the much higher oxidizability of this substrate. All investigated EOs had k_inh comparable to synthetic butylated hydroxytoluene (BHT) were are eligible to replace it in the protection of food or cosmetic products.     

Expanding the Averievite Family, (MX)Cu5O2(T5+O4)2 (T5+ = P,V; M = K,Rb, Cs,Cu; X = Cl,Br): Synthesis and Single-Crystal X-ray Diffraction Study

Averievite-type compounds with the general formula (MX)[Cu₅O₂(TO₄)], where M = alkali metal, X = halogen and T = P, V, have been synthesized by crystallization from gases and structurally characterized for six different compositions: 1 (M = Cs; X = Cl; T = P), 2 (M = Cs; X = Cl; T = V), 3 (M = Rb; X = Cl; T = P), 4 (M = K; X = Br; T = P), 5 (M = K; X = Cl; T = P) and 6 (M = Cu; X = Cl; T = V). The crystal structures of the compounds are based upon the same structural unit, the layer consisting of a kagome lattice of Cu²⁺ ions and are composed from corner-sharing (OCu₄) anion-centered tetrahedra. Each tetrahedron shares common corners with three neighboring tetrahedra, forming hexagonal rings, linked into the two-dimensional [O₂Cu₅]⁶⁺ sheets parallel to (001). The layers are interlinked by (T⁵⁺O₄) tetrahedra (T⁵⁺ = V, P) attached to the bases of the oxocentered tetrahedra in a “face-to-face” manner. The resulting electroneutral 3D framework {[O₂Cu₅](T⁵⁺O₄)₂}⁰ possesses channels occupied by monovalent metal cations M⁺ and halide ions X⁻. The halide ions are located at the centers of the hexagonal rings of the kagome nets, whereas the metal cations are in the interlayer space. There are at least four different structure types of the averievite-type compounds: the P-3m1 archetype, the 2 × 2 × 1 superstructure with the P-3 space group, the monoclinically distorted 1 × 1 × 2 superstructure with the C2/c symmetry and the low-temperature P2₁/c superstructure with a doubled unit cell relative to the high-temperature archetype. The formation of a particular structure type is controlled by the interplay of the chemical composition and temperature. Changing the chemical composition may lead to modification of the structure type, which opens up the possibility to tune the geometrical parameters of the kagome net of Cu²⁺ ions.     

The Effect of Fermentation with Kefir Grains on the Physicochemical and Antioxidant Properties of Beverages from Blue Lupin (Lupinus angustifolius L.) Seeds

Plant derived fermented beverages have recently gained consumers’ interest, particularly due to their intrinsic functional properties and presence of beneficial microorganisms. Three variants containing 5%, 10%, and 15% (w/w) of sweet blue lupin (Lupinus angustifolius L. cv. “Boregine”) seeds were inoculated with kefir grains and incubated at 25 °C for 24 h. After processing, beverages were stored in refrigerated conditions (6 °C) for 21 days. Changes in microbial population, pH, bioactive compounds (polyphenolics, flavonoids, ascorbic acid), reducing sugars, and free amino acids were estimated. Additionally, viscosity, firmness, color, and free radicals scavenging properties were determined. Results showed that lactic acid bacteria as well as yeast were capable of growing well in the lupin matrix without any supplementation. During the process of refrigeration, the viability of the microorganisms was over the recommended minimum level for kefir products. Hydrolysis of polysaccharides as well as increase of free amino acids was observed. As a result of fermentation, the beverages showed excellent DPPH, ABTS^+·, ^·OH, and O₂⁻ radicals scavenging activities with a potential when considering diseases associated with oxidative stress. This beverages could be used as a new, non-dairy vehicle for beneficial microflora consumption, especially by vegans and lactose-intolerant consumers.     

Low Energy Electron Attachment by Some Chlorosilanes

In this paper, the rate coefficients (k) and activation energies (E_a) for SiCl₄, SiHCl₃, and Si(CH₃)₂(CH₂Cl)Cl molecules in the gas phase were measured using the pulsed Townsend technique. The experiment was performed in the temperature range of 298–378 K, and carbon dioxide was used as a buffer gas. The obtained k depended on temperature in accordance with the Arrhenius equation. From the fit to the experimental data points with function described by the Arrhenius equation, the activation energies (E_a) were determined. The obtained k values at 298 K are equal to (5.18 ± 0.22) × 10⁻¹⁰ cm³·s⁻¹, (3.98 ± 1.8) × 10⁻⁹ cm³·s⁻¹ and (8.46 ± 0.23) × 10⁻¹¹ cm³·s⁻¹ and E_a values were equal to 0.25 ± 0.01 eV, 0.20 ± 0.01 eV, and 0.27 ± 0.01 eV for SiHCl₃, SiCl₄, and Si(CH₃)₂(CH₂Cl)Cl, respectively. The linear relation between rate coefficients and activation energies for chlorosilanes was demonstrated. The DFT/B3LYP level coupled with the 6-31G(d) basis sets method was used for calculations of the geometry change associated with negative ion formation for simple chlorosilanes. The relationship between these changes and the polarizability of the attaching center (α_centre) was found. Additionally, the calculated adiabatic electron affinities (AEA) are related to the α_centre.     

Enzyme repurposing of a hydrolase as an emergent peroxidase upon metal binding

As an alternative to Darwinian evolution relying on catalytic promiscuity, a protein may acquire auxiliary function upon metal binding, thus providing it with a novel catalytic machinery. Here we show that addition of cupric ions to a 6-phosphogluconolactonase 6-PGLac bearing a putative metal binding site leads to the emergence of peroxidase activity (k_cat 7.8 × 10^–2 s^–1, K_M 1.1 × 10^–5 M). Both X-ray crystallographic and EPR data of the copper-loaded enzyme Cu·6-PGLac reveal a bis-histidine coordination site, located within a shallow binding pocket capable of accommodating the o-dianisidine substrate.     

Resistant Starch Contents of Starch Isolated from Black Longan Seeds

A large quantity of longan fruits (Dimocarpus longan Lour.) produced annually are processed into many products, one of which is black longan, from which the dried, dark-brown meat has been used medicinally in traditional medicine, while the starch-containing seeds are discarded. In this study, starch samples (BLGSs) were isolated from seeds of black longan fruits prepared using varied conditions. The in vitro digestibility was determined in comparison with those extracted from fresh (FLGS) and dried (DLGS) seeds. Scanning electron microscopy (SEM), X-ray diffraction (XRD), differential scanning calorimetry (DSC), and Fourier transform infrared (FTIR) spectroscopy were employed to evaluate the starch properties. The results showed that the yields of FLGS, DLGS, and BLGSs were 20%, 23%, and 16–22% w/w, respectively. SEM images showed starch granules of mixed shapes, with sizes up to 15 µm in all samples. XRD patterns confirmed an A-type crystallinity for FLGS and DLGS, with strong refraction peaks at 2θ = 15°, 17°, 18°, and 23°, while BLGSs also showed detectable peaks at 2θ = 10° and 21°, which suggested V-type structures. Thermal properties corroborated the changes by showing increases in peak gelatinization temperature (T_p) and enthalpy energy (ΔH) in BLGSs. The paste viscosity of BLGSs (5% w/w) decreased by 20–58% from that of FLGS. The FTIR peak ratio at 1045/1022 and 1022/995 cm⁻¹ also indicated an increase in ordered structure in BLGSs compared to FLGS. The significant increase in the amounts of slowly digestible starch (SDS) and resistant starch (RS) in BLGSs compared to FLGS, especially at a prolonged incubation time of 20 (4.2×) and 30 days (4.1×), was proposed to be due to the heat-induced formation of starch inclusion with other components inside the seed during the black longan production process. Thus, black longan seed could be a new source of starch, with increased RS content, for potential use in the food and related industries.     

Response Surface Optimisation of Polydimethylsiloxane (PDMS) on Borosilicate Glass and Stainless Steel (SS316) to Increase Hydrophobicity

Particle deposition on the surface of a drying chamber is the main drawback in the spray drying process, reducing product recovery and affecting the quality of the product. In view of this, the potential application of chemical surface modification to produce a hydrophobic surface that reduces the powder adhesion (biofouling) on the wall of the drying chamber is investigated in this study. A hydrophobic polydimethylsiloxane (PDMS) solution was used in the vertical dipping method at room temperature to determine the optimum coating parameters on borosilicate glass and stainless steel substrates, which were used to mimic the wall surface of the drying chamber, to achieve highly hydrophobic surfaces. A single-factor experiment was used to define the range of the PDMS concentration and treatment duration using the Response Surface Methodology (RSM). The Central Composite Rotatable Design (CCRD) was used to study the effects of the concentration of the PDMS solution (X₁, %) and the treatment duration (X₂, h) on the contact angle of the substrates (°), which reflected the hydrophobicity of the surface. A three-dimensional response surface was constructed to examine the influence of the PDMS concentration and treatment duration on contact angle readings, which serve as an indicator of the surface’s hydrophobic characteristics. Based on the optimisation study, the PDMS coating for the borosilicate glass achieved an optimum contact angle of 99.33° through the combination of a PDMS concentration of X₁ = 1% (w/v) and treatment time of X₂ = 4.94 h, while the PDMS coating for the stainless steel substrate achieved an optimum contact angle of 98.31° with a PDMS concentration of X₁ = 1% (w/v) and treatment time of X₂ = 1 h. Additionally, the infrared spectra identified several new peaks that appeared on the PDMS-treated surfaces, which represented the presence of Si-O-Si, Si-CH₃, CH₂, and CH₃ functional groups for the substrates coated with PDMS. Furthermore, the surface morphology analysis using the Field Emission Scanning Electron Microscopy (FESEM) showed the presence of significant roughness and a uniform nanostructure on the surface of the PDMS-treated substrates, which indicates the reduction in wettability and the potential effect of unwanted biofouling on the spray drying chamber. The application of PDMS and PTFE on the optimally coated substrates successfully reduced the amount of full cream milk particles that adhered to the surface. The low surface energy of the treated surface (19–27 mJ/m²) and the slightly higher surface tension of the full cream milk (54–59 mJ/m²) resulted in a high contact angle (102–103°) and reduced the adhesion work on the treated substrates (41–46 mJ/m²) as compared to the native substrates.     

Solubility and preferential solvation of indomethacin in 1,4-dioxane + water solvent mixtures

The solubilities of indomethacin (IMC) in 1,4-dioxane + water cosolvent mixtures were determined at several temperatures, 293.15–313.15 K. The thermodynamic functions: Gibbs energy, enthalpy, and entropy of solution and of mixing were obtained from these data by using the van’t Hoff and Gibbs equations. The solubility was maximal in 0.95 mass fraction of 1,4-dioxane and very low in pure water at all the temperatures. A non-linear plot of ΔH_soln ° vs. ΔG_soln ° with negative slope from pure water up to 0.60 mass fraction of 1,4-dioxane and positive beyond this up to 0.95 mass fraction of 1,4-dioxane was obtained. Accordingly, the driving mechanism for IMC solubility in water-rich mixtures is the entropy, probably due to water-structure loss around the drug non-polar moieties by 1,4-dioxane, whereas, above 0.60 mass fraction of 1,4-dioxane the driving mechanism is the enthalpy, probably due to IMC solvation increase by the co-solvent molecules. The preferential solvation of IMC by the components of the solvent was estimated by means of the quasi-lattice quasi-chemical method, whereas the inverse Kirkwood-Buff integral method could not be applied because of divergence of the integrals in intermediate compositions.     

Study on the Joint Toxicity of BPZ,BPS, BPC and BPF to Zebrafish

Bisphenol Z (BPZ), bisphenol S (BPS), bisphenol C (BPC), and bisphenol F (BPF) had been widely used as alternatives to bisphenol A (BPA), but the toxicity data of these bisphenol analogues were very limited. In this study, the joint toxicity of BPZ, BPS, BPC, and BPF to zebrafish (Danio rerio) was investigated. The median half lethal concentrations (LC50) of BPZ, BPS, BPC, and BPF to zebrafish for 96 h were 6.9 × 10⁵ µM, 3.9 × 10⁷ µM, 7.1 × 10⁵ µM, and1.6 × 10⁶ µM, respectively. The joint toxicity effect of BPF–BPC (7.7 × 10⁵–3.4 × 10⁵µM) and BPZ–BPC (3.4 × 10⁵–3.5 × 10⁵µM) with the same toxic ratio showed a synergistic effect, which may be attributed to enzyme inhibition or induction theory. While the toxicity effect of the other two bisphenol analogue combined groups and multi-joint pairs showed an antagonistic effect due to the competition site, other causes need to be further explored. Meanwhile, the expression levels of the estrogen receptor genes (ERα, ERβ1) and antioxidant enzyme genes (SOD, CAT, GPX) were analyzed using a quantitative real-time polymerase chain reaction in zebrafish exposure to LC₅₀ of BPZ, BPS, BPC, and BPF collected at 24, 48, 72, and 96 h. Relative expression of CAT, GPX, and ERβ1 mRNA declined significantly compared to the blank control, which might be a major cause of oxidant injury of antioxidant systems and the disruption of the endocrine systems in zebrafish.     

Solubility Determination,Hansen Solubility Parameters and Thermodynamic Evaluation of Thymoquinone in (Isopropanol + Water) Compositions

This article studies the solubility, Hansen solubility parameters (HSPs), and thermodynamic behavior of a naturally-derived bioactive thymoquinone (TQ) in different binary combinations of isopropanol (IPA) and water (H₂O). The mole fraction solubilities (x₃) of TQ in various (IPA + H₂O) compositions are measured at 298.2–318.2 K and 0.1 MPa. The HSPs of TQ, neat IPA, neat H₂O, and binary (IPA + H₂O) compositions free of TQ are also determined. The x₃ data of TQ are regressed by van’t Hoff, Apelblat, Yalkowsky–Roseman, Buchowski–Ksiazczak λh, Jouyban–Acree, and Jouyban–Acree–van’t Hoff models. The maximum and minimum x₃ values of TQ are recorded in neat IPA (7.63 × 10⁻² at 318.2 K) and neat H₂O (8.25 × 10⁻⁵ at 298.2 K), respectively. The solubility of TQ is recorded as increasing with the rise in temperature and IPA mass fraction in all (IPA + H₂O) mixtures, including pure IPA and pure H₂O. The HSP of TQ is similar to that of pure IPA, suggesting the great potential of IPA in TQ solubilization. The maximum molecular solute-solvent interactions are found in TQ-IPA compared to TQ-H₂O. A thermodynamic study indicates an endothermic and entropy-driven dissolution of TQ in all (IPA + H₂O) mixtures, including pure IPA and pure H₂O.     

Free-radical chain oxidation of 1,4-dioxane inhibited by 2-thio-6-aminouracil

The effect of 2-thio-6-aminouracil on the oxygen uptake kinetics has been studied in 1,4-dioxane free-radical chain oxidation as a model system. The presence of a thiocarbonyl group in the 2-position of the uracil ring makes 6-aminouracil highly reactive towards 1,4-dioxane peroxy radicals. The rate constant of the 1,4-dioxane peroxy radical interaction with 2-thio-6-aminouracil has been measured to be k₇ = (3.0 ± 0.5) × 10⁵ L mol^–1 s^–1 (333 K). The stoichiometric inhibition factor f = 1.1 ± 0.1 has been determined.     

Carrageenan of Red Algae Eucheuma gelatinae: Extraction,Antioxidant Activity,Rheology Characteristics,and Physicochemistry Characterization

Carrageenan is an anionic sulfated polysaccharide that accounts for a high content of red seaweed Eucheuma gelatinae. This paper focused on the extraction, optimization, and evaluation of antioxidant activity, rheology characteristics, and physic-chemistry characterization of β-carrageenan from Eucheuma gelatinae. The extraction and the optimization of β-carrageenan were by the maceration-stirred method and the experimental model of Box-Behken. Antioxidant activity was evaluated to be the total antioxidant activity and reducing power activity. The rheology characteristics of carrageenan were measured to be gel strength and viscosity. Physic-chemistry characterization was determined, including the molecular weight, sugar composition, function groups, and crystal structure, through GCP, GC-FID, FTIR, and XRD. The results showed that carrageenan possessed antioxidant activity, had intrinsic viscosity and gel strength, corresponding to 263.02 cps and 487.5 g/cm², respectively. Antioxidant carrageenan is composed of rhamnose, mannose, glucose, fucose, and xylose, with two molecular weight fractions of 2.635 × 10⁶ and 2.58 × 10⁶ g/mol, respectively. Antioxidant carrageenan did not exist in the crystal. The optimization condition of antioxidant carrageenan extraction was done at 82.35 °C for 115.35 min with a solvent-to-algae ratio of 36.42 (v/w). At the optimization condition, the extraction efficiency of carrageenan was predicted to be 87.56 ± 5.61 (%), the total antioxidant activity and reducing power activity were predicted to 71.95 ± 5.32 (mg ascorbic acid equivalent/g DW) and 89.84 ± 5.84 (mg FeSO₄ equivalent/g DW), respectively. Purity carrageenan content got the highest value at 42.68 ± 2.37 (%, DW). Antioxidant carrageenan from Eucheuma gelatinae is of potential use in food and pharmaceuticals.     

Host-Guest Complexation of Oxaliplatin and Para-Sulfonatocalix[n]Arenes for Potential Use in Cancer Therapy

P-sulfonatocalix[n]arenes have demonstrated a great potential for encapsulation of therapeutic drugs via host-guest complexation to improve solubility, stability, and bioavailability of encapsulated drugs. In this work, guest-host complexes of a third-generation anticancer drug (oxaliplatin) and p-4-sulfocalix[n]arenes (n = 4 and 6; p-SC4 and p-SC6, respectively) were prepared and investigated, using ¹H NMR, UV, Job’s plot analysis, and DFT calculations, for use as cancer therapeutics. The peak amplitude of the prepared host-guest complexes was linearly proportional to the concentration of oxaliplatin in the range of 1.0 × 10⁻⁵ M⁻¹ to 2.1 × 10⁻⁴ M⁻¹. The reaction stoichiometry between either p-SC4 or p-SC6 and oxaliplatin in the formed complexes was 1:1. The stability constants for the complexes were 5.07 × 10⁴ M⁻¹ and 6.3 × 10⁴ M⁻¹. These correspond to complexation free energy of −6.39 and −6.52 kcal/mol for p-SC4 and p-SC6, respectively. Complexation between oxaliplatin and p-SC4 or p-SC6 was found to involve hydrogen bonds. Both complexes exhibited enhanced biological and high cytotoxic activities against HT-29 colorectal cells and MCF-7 breast adenocarcinoma compared to free oxaliplatin, which warrants further investigation for cancer therapy.