室温快速合成Ag基金属有机骨架材料用于电催化还原CO2

选择具有强给电子能力的1,2,4-三唑为配体,成功合成了银基金属有机骨架材料(Ag-MOF)并用于电催化还原CO₂反应(CO₂RR)。借助粉末X射线衍射、透射电子显微镜、扫描电子显微镜、计时电流法等表征手段对材料的晶体结构、形貌和电催化CO₂RR性能进行了系统的研究。与商品化的纳米Ag颗粒对比,Ag-MOF展现出更优异的电催化CO₂RR产物选择性、催化活性和稳定性,在-0.9 V (vs RHE)时,CO的法拉第效率高达96.1%。当电压为-1.1 V (vs RHE)时,电流密度可达17 mA·cm^-2,且电极可以稳定运行300 min。这说明通过选择合适的配体结构,可以改变催化位点周围的化学环境,从而高效将CO₂转化为目标产物。     

室温快速合成Ag基金属有机骨架材料用于电催化还原CO2

选择具有强给电子能力的1,2,4-三唑为配体,成功合成了银基金属有机骨架材料(Ag-MOF)并用于电催化还原CO₂反应(CO₂RR)。借助粉末X射线衍射、透射电子显微镜、扫描电子显微镜、计时电流法等表征手段对材料的晶体结构、形貌和电催化CO₂RR性能进行了系统的研究。与商品化的纳米Ag颗粒对比,Ag-MOF展现出更优异的电催化CO₂RR产物选择性、催化活性和稳定性,在-0.9 V (vs RHE)时,CO的法拉第效率高达96.1%。当电压为-1.1 V (vs RHE)时,电流密度可达17 mA·cm^-2,且电极可以稳定运行300 min。这说明通过选择合适的配体结构,可以改变催化位点周围的化学环境,从而高效将CO₂转化为目标产物。     

室温快速合成Ag基金属有机骨架材料用于电催化还原CO2

选择具有强给电子能力的1,2,4-三唑为配体,成功合成了银基金属有机骨架材料(Ag-MOF)并用于电催化还原CO₂反应(CO₂RR)。借助粉末X射线衍射、透射电子显微镜、扫描电子显微镜、计时电流法等表征手段对材料的晶体结构、形貌和电催化CO₂RR性能进行了系统的研究。与商品化的纳米Ag颗粒对比,Ag-MOF展现出更优异的电催化CO₂RR产物选择性、催化活性和稳定性,在-0.9 V (vs RHE)时,CO的法拉第效率高达96.1%。当电压为-1.1 V (vs RHE)时,电流密度可达17 mA·cm^-2,且电极可以稳定运行300 min。这说明通过选择合适的配体结构,可以改变催化位点周围的化学环境,从而高效将CO₂转化为目标产物。     

Comparison of CO2 Reduction Performance with NH3 and H2O between Cu/TiO2 and Pd/TiO2

The aim of this study is to clarify the effect of doped metal type on CO₂ reduction characteristics of TiO₂ with NH₃ and H₂O. Cu and Pd have been selected as dopants for TiO₂. In addition, the impact of molar ratio of CO₂ to reductants NH₃ and H₂O has been investigated. A TiO₂ photocatalyst was prepared by a sol-gel and dip-coating process, and then doped with Cu or Pd fine particles by using the pulse arc plasma gun method. The prepared Cu/TiO₂ film and Pd/TiO₂ film were characterized by SEM, EPMA, TEM, STEM, EDX, EDS and EELS. This study also has investigated the performance of CO₂ reduction under the illumination condition of Xe lamp with or without ultraviolet (UV) light. As a result, it is revealed that the CO₂ reduction performance with Cu/TiO₂ under the illumination condition of Xe lamp with UV light is the highest when the molar ratio of CO₂/NH₃/H₂O = 1:1:1 while that without UV light is the highest when the molar ratio of CO₂/NH₃/H₂O = 1:0.5:0.5. It is revealed that the CO₂ reduction performance of Pd/TiO₂ is the highest for the molar ratio of CO₂/NH₃/H₂O = 1:1:1 no matter the used Xe lamp was with or without UV light. The molar quantity of CO per unit weight of photocatalyst for Cu/TiO₂ produced under the illumination condition of Xe lamp with UV light was 10.2 μmol/g, while that for Pd/TiO₂ was 5.5 μmol/g. Meanwhile, the molar quantity of CO per unit weight of photocatalyst for Cu/TiO₂ produced under the illumination condition of Xe lamp without UV light was 2.5 μmol/g, while that for Pd/TiO₂ was 3.5 μmol/g. This study has concluded that Cu/TiO₂ is superior to Pd/TiO₂ from the viewpoint of the molar quantity of CO per unit weight of photocatalyst as well as the quantum efficiency.     

Cu(II) complexes with chiral ethylenediaminodioxime and propylenediaminodioxime, the derivatives of monoterpenoid α-pinene: Synthesis and structures

Copper(II) complexes with chiral ethylenediaminodioxime (H₂L¹) and propylenediaminodioxime (H₂L²), the derivatives of terpenoid α-pinene, of the composition [Cu(H₂L¹)](NO₃)₂ (I) and [Cu(H₂L²)NO₃]NO₃ (II) are synthesized and studied by X-ray diffraction method. The ionic structures of I and II consist of complex cations [Cu(H₂L¹)]²⁺ (I), [Cu(H₂L²)NO₃]⁺ (II), and outer-sphere anions NO ₃ ^? . In the cation of compound I, the Cu²⁺ ion (C.N.4) coordinates four N atoms of tetradentate cycle-forming ligand H₂L¹ with anti-configuration. The coordination surrounding of the Cu atom is a trapezoidally distorted square. In the cation of compound II, the Cu²⁺ ion (C.N.5) coordinates the O atom of monodentate nitro group in addition to four N atoms of tetradentate cycle-forming ligand H₂L². The coordination polyhedron of the Cu atom has the shape of a distorted square pyramid N₄O. Coordinated H₂L² molecule has amphi-configuration, which is responsible for the formation of hydrogen bond between the oxime groups. The complex cations and NO ₃ ^? anions in structures I and II are linked into ionic ensembles by hydrogen bonds.     

Preparation, spectroscopic properties of 1,4-di (N,N-diisopropylacetamido)-2,3(1H,4H)-quinoxalinedione (L) lanthanide complexes and the supramolecular structure of [Nd2L2(NO3)6(H2O)2]·H2O

The reaction of lanthanide nitrate with 1,4-di (N,N-diisopropylacetamido)-2,3(1H,4H)-quinoxalinedione (L) yields six novel Ln(III) complexes ([Ln₂L₂(NO₃)₆(H₂O)₂]·H₂O) which are characterized by elemental analysis, thermogravimetric analysis (TGA), conductivity measurements, IR, electronic and ¹H NMR spectroscopies. A new quinoxalinedione-based ligand is used as antenna ligand to sensitize the emission of lanthanide cations. The lowest triplet state energy level of the ligand in the nitrate complex matches better to the resonance level of Eu(III) and Sm(III) than Tb(III) and Dy(III) ion. The f-f fluorescence is induced in the Eu³⁺ and Sm³⁺ complexes by exciting into the π-π* absorptions of the ligand in the UV. Furthermore, the crystal structures of a novel binuclear complex [Nd₂L₂(NO₃)₆(H₂O)₂]·H₂O has been determined by single-crystal X-ray diffraction. The binuclear [Nd₂L₂(NO₃)₆(H₂O)₂]·H₂O complex units are linked by the intermolecular hydrogen bonds and π-π interactions to form a two-dimensional (2-D) layer supramolecule.     

铬助剂对Cu/ZrO_2/CNTs-NH_2催化剂催化CO_2加氢合成甲醇性能的影响

采用并流共沉淀方法制备了一系列不同铬含量的Cu/ZrO2/CNTs-NH2催化剂,在固定床反应器上考察铬对催化剂催化CO2加氢合成甲醇反应性能的影响.当铬含量为1%(w),反应温度为260°C,压力为3.0MPa,原料气组成为V(H2):V(CO2):V(N2)=69:23:8,空速为3600 mL·h-1·g-1时,催化剂的促进效果最显著,甲醇收率达7.78%.氮吸附、粉末X射线衍射(XRD)、氢气程序升温脱附(H2-TPR)、X射线光电子能谱(XPS)、二氧化碳程序升温脱附(CO2-TPD)、差热分析(DTA)以及扫描电子显微镜(SEM)等表征结果表明,随着铬含量的增加,铜颗粒的粒径减小,催化剂的比表面积增大.铬的加入一方面提高了铜的分散性,抑制了ZrO2的相变和活性组分的烧结;另一方面提高了CO2的吸附量并促进CO2由弱吸附向强吸附转化,从而提高甲醇的收率;但是当铬含量大于1%时,催化剂表面Cu、Zr的总含量明显下降,降低了CO2的吸附量并且形成了超强CO2吸附物种,抑制了CO2及其中间产物的转化,从而降低了甲醇收率.     

片状Co9S8/ZnS/C复合材料的制备及电催化产氧性能

以六水合硝酸钴[Co(NO_3)_2·6H_2O]为钴源、六水合硝酸锌[Zn(NO_3)_2·6H_2O]为锌源、2,2′-硫代二乙酸(C4H6O4S)为硫源,采用溶剂热法制备出了片状的Co_9S_8/ZnS/C复合材料。采用X射线衍射(XRD)、扫描电镜(SEM)、透射电镜(TEM)和N_2吸附/脱附测试等手段对于片状Co_9S_8/ZnS/C复合材料结构和形貌等进行表征,同时对片状Co_9S_8/ZnS/C复合材料进行了电催化产氧性能测试。结果表明:片状Co_9S_8/ZnS/C复合材料的起始过电位为390 mV,塔菲尔斜率为144 mV·dec~(-1),具有高的电催化产氧性能。     

Kinetics of Complex Formation Between Cobalt(II) and the Polyamine Me2Octaen

Abstract

The kinetics and the equilibria of complex formation between Co(II) and the linear polyamine 1,25-dimethyl-1,4,7,10,13,16,19,22,25-nonaazapentacosane (Me₂Octaen) have been investigated in aqueous solution under anaerobic conditions by the stopped-flow and potentiometric method. Static titrations and kinetic experiments indicate that below pH 5.6 the binding of Co(II) to the ligand gives rise to several 1:1 complexes differing for their degree of protonation, whereas above pH 5.6 binuclear complexes are formed as well. The analysis of the kinetic data reveals that the mostly reactive form of the ligand (denoted in its fully protonated form as H₉L₉₊) is H₆L⁶⁺. The species H₅L⁵⁺ and H₄L⁴⁺ yield only a minor contribution to the overall process of complex formation. Measurements at different ionic strengths have shown positive salt effects, as expected for reactive processes involving particles with charges of the same sign. The analysis of the results shows that Co²⁺ and H₆L⁶⁺ react according to the internal conjugate base mechanism.     

NO2对Cu/SAPO-34分子筛催化剂上NH3选择性催化还原NO性能的影响

主要考察了NO₂对Cu/SAPO-34 分子筛催化剂在整个温度范围内（100-500 ℃）NH₃选择性催化还原（SCR）NO性能的影响. 研究所使用样品为新鲜Cu/SAPO-34 催化剂在750 ℃下水热处理4 h 的稳定期样品.通过X射线衍射（XRD）和扫描电子显微镜（SEM）对样品的结构以及形貌进行表征,采用SCR活性评价、动力学实验以及原位漫反射傅里叶变换红外光谱（in situ-DRIFTS）表征催化剂的性能以及催化剂表面物种的变化. 活性评价实验结果表明,NO₂会抑制催化剂的低温（100-280 ℃）活性,但其存在会提高催化剂的高温（280 ℃以上）活性. 与此同时,随着反应物中NO/NO₂的摩尔比例减少,由于NH₄NO₃物种的分解,副产物（N₂2O）的浓度增大. 动力学结果表明,Cu/SAPO-34 催化剂上快速SCR反应的表观活化能（E_a=64.02 kJ·mol^-1）比标准SCR反应的表观活化能（E_a=48.00 kJ·mol^-1）更大. In situ-DRIFTS实验结果表明NO比NO₂更容易在催化剂表面形成硝酸盐,并且NO₂更容易与吸附在Brønsted 酸性位上的NH₃物种反应生成NH₄NO₃. 低温下,催化剂表面的NH₄NO₃物种会覆盖SCR反应的活性位,造成活性降低,但在高温时,形成的NH₄NO₃物种一部分会被NO还原为N2,而另一部分会直接热分解为N₂O,造成催化剂的选择性降低.     

Gram-Scale Synthesis of an Ultrastable Microporous Metal-Organic Framework for Efficient Adsorptive Separation of C2H2/CO2 and C2H2/CH4

A highly water and thermally stable metal-organic framework (MOF) Zn₂(Pydc)(Ata)₂ (1, H₂Pydc = 3,5-pyridinedicarboxylic acid; HAta = 3-amino-1,2,4-triazole) was synthesized on a large scale using inexpensive commercially available ligands for efficient separation of C₂H₂ from CH₄ and CO₂. Compound 1 could take up 47.2 mL/g of C₂H₂ under ambient conditions but only 33.0 mL/g of CO₂ and 19.1 mL/g of CH₄. The calculated ideal absorbed solution theory (IAST) selectivities for equimolar C₂H₂/CO₂ and C₂H₂/CH₄ were 5.1 and 21.5, respectively, comparable to those many popular MOFs. The Q_st values for C₂H₂, CO₂, and CH₄ at a near-zero loading in 1 were 43.1, 32.1, and 22.5 kJ mol⁻¹, respectively. The practical separation performance for C₂H₂/CO₂ mixtures was further confirmed by column breakthrough experiments.     

N,S,O-Containing organic ligands based on salicylaldehyde and 2-thiosubstituted ethylamines and their complexes with CoII, NiII, and CuII

The reaction of 2,2′-di(2-hydroxybenzaliminoethyl) disulfide (H₂L¹) and 2-[(2-thioethyl)iminomethyl]phenol (H₂L²) with MCl₂·xH₂O (M = Co, Ni, Cu) afforded the [M₂(L¹)Cl₂] and [M(L²)]₂ complexes, respectively. Their structures were determined by the data of electronic and IR spectroscopy and PM3 quantum chemical calculations. The H₂L¹ ligand and the complexes were studied by electrochemistry (CV and using a rotating disk electrode). The primary electronic changes are localized on the ligand fragment upon the electrochemical oxidation and reduction of the complexes. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 7, pp. 1325–1330, July, 2007.     

Thermal decomposition of cobalt nitrato compounds: Preparation of anhydrous cobalt(II)nitrate and its characterisation by Infrared and Raman spectra

The thermal decomposition of Co(NO₃)₂·6H₂O (1) as well as that one of NO[Co(NO₃)₃] (Co(NO₃)₂·N₂O₄) (2) was followed by thermogravimetric (TG) measurements, X-ray recording and Raman and IR spectra. The stepwise decomposition reactions of 1 and 2 leading to anhydrous cobalt(II)nitrate (3) were established. In N₂ atmosphere, cobalt oxides are finally formed whereas in H₂/N₂ (10% H₂) cobalt metal is produced. Rapid heating of cobalt(II)nitrate hexahydrate causes melting (formation of a hydrate melt) and therefore side reactions in the hydrate melt by incoupled reactions and evolution/evaporation of different species as, e.g., HNO₃, NO₂, etc. In case of larger amounts in dense packing in the sample container, the formation of oxo(hydoxo)nitrates is possible at higher temperature. For 2, its thermal decomposition to 3 was followed and its decomposition mechanism is proposed.     

Copper(II) complexes with hydroxyl-containing dipeptides glycyl- L -serine and L -seryl- L -tyrosine

Dipeptides glycyl- _L -serine and _L -seryl– _L -tyrosine are tridentate ligands in coordination with Cu(II) through their NH₂?, N–(from deprotonated amide group) and O–atom (by COO- group), forming [Cu^II(LH_?1)H₂O]. The forth position of square-planar geometry of Cu²⁺ is occupied by H₂O as terminal ligand. Solid-state linear dichroic IR-spectroscopy, UV-Vis, mass spectrometry with ESI and FAB, tandem mass spectrometry (HPLC-MS/MS), TGV and DSC methods, EPR and magnetochemistry data prove the formation of five-membered chelate rings with participation of Cu²⁺ both in solution and in solid state.     

Water molecule-enhanced CO2 insertion in lanthanide coordination polymers

Two new lanthanide coordination polymers H₂N(CH₃)₂·[Eu^III₂(L₁)₃(L₂)] (1, L₁=isophthalic acid dianion, L₂=formic acid anion) and [La^III(2,5-PDC)(L₂)](2, 2,5-PDC=2,5-pyridinedicarboxylate dianion) were synthesized under solvothermal conditions. It is of interest that the formic ligand (L₂) is not contained in the stating materials, but arises from the water molecule-enhanced CO₂ insertion during the solvothermal process. Both of the two compounds exhibit complicated three dimensional sandwich-like frameworks.     

Synthesis and Structure of Copper(II) Nitrate Complexes with 2, 6‐Bis(pyrazolyl)pyridine

Three mononuclear copper(II) complexes of copper nitrate with 2, 6‐bis(pyrazol‐1‐yl)pyridine ( bPzPy ) and 2, 6‐bis(3′,5′‐dimethylpyrazol‐1‐yl)pyridine ( bdmPzPy ), [Cu(bPzPy)(NO₃)₂] ( 1 ), [Cu(bPzPy)(H₂O)(NO₃)₂] ( 2 ) and [Cu(bdmPzPy)(NO₃)₂] ( 3 ) were synthesized by the reaction of copper nitrate with the ligand in ethanol solution. The complexes have been characterized through analytical, spectroscopic and EPR measurements. Single crystal X‐ray structure analysis of complexes 1 and 2 revealed a five‐coordinate copper atom in 1 , whereas 2 contains a six‐coordinate (4+2) Cu^II ion with molecular units acting as supramolecular nodes. These neutral nodes are connected through O–H ··· O(nitrate) hydrogen bonds to give couples of parallel linear strips assembled in 1D‐chains in a zipper‐like motif.     

Effect of PDI ligand binding pattern on the electrocatalytic activity of two Ru(II) complexes for CO2 reduction

The electrochemical properties of two complexes, [Ru^II(η³-(N,N,N)-^OMePDI)Cl₂(PPh₃)]⁰ ( 1 ) and [Ru^II(η²-(C,N)-^OMePDI-H)Cl (PPh₃)₂]⁰ ( 2 ), were studied. In octahedral complex 1 , bis(imino)pyridine (PDI) is a tridentate η³-N,N,N-coordinated ligand, whereas in trigonal-bipyramidal complex 2 , the deprotonated PDI ligand adopts the unusual bidentate binding mode η²-C,N to coordinate to the central Ru(II) ion. Bulk electrolysis in two electrolyte solutions of acetonitrile (MeCN) and tetrahydrofuran (THF) suggests that complexes 1 and 2 have very different electrocatalytic CO₂ reduction activities. In MeCN solution, complex 1 can selectively electrocatalytic CO₂ reduction to CO with a Faradaic efficiency of about 50% and a turnover frequency (TOF) of 4.4 s⁻¹, whereas complex 2 can perform electrocatalytic of CO₂ reduction with a Faraday efficiency of ~22% and a TOF of 0.3 S⁻¹. The electrocatalytic CO₂ reduction selectivity and activity of the two complexes are poor when the solvent is changed to THF. Combined with the results of the density functional theory calculation, we propose that the binding pattern of the redox-active ligand ^OMePDI has a significant effect on the electrocatalytic activity for the two Ru(II)PDI complexes.     

Synthesis and spectral studies of new macrocyclic Schiff base Cu(II), Ni(II), Cd(II), Zn(II), Pb(II), and La(III) complexes containing pyridine head unit

1,6-Bis(2-formylphenyl) hexane (I) was derived from 1,6-dibromohexane with salicylaldehyde and K₂CO₃ and the ligand (L) was derived from compound I and 2,6-diaminopyridine. Then, the Cu(II), Ni(II), Pb(II), Zn(II), Cd(II), and La(III) complexes with L were synthesized by the reaction of this ligand and Cu(NO₃)₂ · 3H₂O, Ni(NO₃)₂ · 6H₂O, Pb(NO₃)₂, Zn(NO₃)₂ · 6H₂O, Cd(NO₃)₂ · 6H₂O, and La(NO₃)₃ · 6H₂O, respectively. The ligand and its metal complexes were characterized by elemental analysis, IR, ¹H and ¹³C NMR, UV-Vis spectra, magnetic susceptibility, conductivity measurements, and mass spectra. All complexes are diamagnetic and the Cu(II) complex is binuclear. The article is published in the original.     

Structure and Optical Properties of 0.1BiFeO3-0.9SrBi2Nb2O9 Thin Films Using a Modified Sol-Gel Technique

Fe-doped SrBi₂Nb₂O₉ precursor solution was synthesized using bismuth nitrate Bi(NO₃)₃·5H₂O, strontium nitrate Sr(NO₃)₂, iron nitrate Fe(NO₃)₃·9H₂O, and niobium ethoxide Nb(OC₂H₅)₅ as starting materials, ethylene glycol monomethyl ether (C₃H₈O₂) as the solvent. 0.1BiFeO₃-0.9SrBi₂Nb₂O₉ thin films were prepared on fused quartz substrates using sol-gel processing. The surface morphology and crystal structure and optical properties of the thin films were investigated. The thin film annealing at 400°C were found to be amorphous, and the thin films crystallize to a perovskite structure after a post-deposition annealing at 600°C for 1 h in air. The grain of thin film was evenly distributed. The thin films exhibit the designed optical transmission, while the optical transition is indirect in nature. Their optical band gap is about 2.5 eV.     

Synthesis and characterization of new macrocyclic Schiff base derived from 2,6-diaminopyridine and 1,7-bis(2-formylphenyl)-1,4,7-trioxaheptane and its Cu(II), Ni(II), Pb(II), Co(III) and La(III) complexes

A new macrocyclic ligand, 1,3,5-triaza-2,4:7,8:16,17-tribenzo-9,12,15-trioxacyclooktadeca-1,5-dien (L) was synthesized by reaction of 2,6-diaminopyridine and 1,7-bis(2-formylphenyl)-1,4,7-trioxaheptane. Then, its Cu(II), Ni(II), Pb(II), Co(III) and La(III) complexes were synthesized by template effect by reaction of 2,6-diaminopyridine and 1,7-bis(2-formylphenyl)-1,4,7-trioxaheptane and Cu(NO₃)₂ · 3H₂O, Ni(NO₃)₂ · 6H₂O, Pb(NO₃)₂, Co(NO₃)₂ · 6H₂O, La(NO₃)₃ · 6H₂O, respectively. The ligand and its metal complexes have been characterized by elemental analysis, IR, ¹H and ¹³C NMR, UV–Vis spectra, magnetic susceptibility, thermal gravimetric analysis, conductivity measurements, mass spectra and cyclic voltammetry. All complexes are diamagnetic and Cu(II) complex is binuclear. The Co(II) was oxidized to Co(III). The comparative electrochemical studies show that the nickel complex exhibited a quasi-reversible one-electron reduction process while copper and cobalt complexes gave irreversible reduction processes in DMSO solution.