Identification of Non-Volatile Compounds That Impact Flavor Disliking of Whole Wheat Bread Made with Aged Flours

Whole wheat flour has a shorter shelf life than refined wheat flour due to off-flavor development. An untargeted liquid chromatography/mass spectrometry (LC/MS) flavoromics approach was applied to identify compounds that negatively impact the flavor liking in whole wheat bread made from aged flours. The chemical profiles of thirteen breads made from aged flours were obtained using LC/MS and modeled by orthogonal partial least squares (OPLS) to predict flavor liking. Top predictive chemical features (negatively correlated) were identified as pinellic acid (9S,12S,13S-trihydroxy-10E-octadecenoic acid), 12,13-dihydroxy-9Z-octadecenoic acid, and 1-(9Z,12Z-octadecadienoyl)-sn-glycero-3-phosphocholine. The sensory analysis confirmed the three compounds increased the bitterness intensity of the bread samples. The formation of the trihydroxy fatty acid bitter compound, pinellic acid (9S,12S,13S-trihydroxy-10E-octadecenoic acid), was impacted by the lipoxygenase activity of the flour; however, there was no influence on the formation of 12,13-dihydroxy-9Z-octadecenoic acid or 1-(9Z,12Z-octadecadienoyl)-sn-glycero-3-phosphocholine. Additionally, the concentrations of all bitter compounds were significantly higher in bread made from aged flour versus non-aged flour.     

Ancient Wheat and Quinoa Flours as Ingredients for Pasta Dough—Evaluation of Thermal and Rheological Properties

The aim of this study was to investigate thermal and rheological properties of selected ancient grain flours and to evaluate rheological properties of mixtures thereof represented by pasta dough and dry pasta. Flours from spelt, einkorn, and emmer ancient wheat varieties were combined with quinoa flour. All these flour sources are considered healthy grains of high bioactive component content. Research results were compared to durum wheat flour or spelt wheat flour systems. Differential scanning calorimeter (DSC) and a rapid visco analyzer (RVA) were used to investigate the phase transition behavior of the flours and pasting characteristics of the flours and dried pasta. Angular frequency sweep experiments and creep and recovery tests of the pasta dough were performed. The main components modifying the pasta dough structure were starch and water. Moreover, the proportion of the individual flours influenced the rheological properties of the dough. The durum wheat dough was characterized by the lowest values of the K′ and K″ parameters of the power law models (24,861 Pa·sⁿ′ and 10,687 Pa·sⁿ″, respectively) and the highest values of the instantaneous (J₀) and retardation (J₁) compliances (0.453 × 10⁻⁴ Pa and 0.644 × 10⁻⁴ Pa, respectively). Replacing the spelt wheat flour with the other ancient wheat flours and quinoa flour increased the proportion of elastic properties and decreased values of the J₀ and J₁ of the pasta dough. Presence of the quinoa flour increased pasting temperature (from 81.4 up to 83.3 °C) and significantly influenced pasting viscosities of the spelt wheat pasta samples. This study indicates a potential for using mixtures of spelt, einkorn, and emmer wheat flours with quinoa flour in the production of innovative pasta dough and pasta products.     

Gamma radiation influence on technological characteristics of wheat flour

This study aimed at determining the influence of gamma radiation on technological characteristics of wheat (Triticum sativum) flour and physical properties of pan breads made with this flour. The bread formulation included wheat flour, water, milk, salt, sugar, yeast and butter. The α-amylase activity of wheat flour irradiated with 1, 3 and 9 kGy in a Gammacell 220 (AECL), one day, five days and one month after irradiation was evaluated. Deformation force, height and weight of breads prepared with the irradiated flour were also determined. The enzymatic activity increased—reduction of falling number time—as radiation dose increased, their values being 397 s (0 kGy), 388 s (1 kGy), 343 s (3 kGy) and 293 s (9 kGy) respectively, remaining almost constant over the period of one month. Pan breads prepared with irradiated wheat flour showed increased weight. Texture analysis showed that bread made of irradiated flour presented an increase in maximum deformation force. The results indicate that wheat flour ionizing radiation processing may confer increased enzymatic activity on bread making and depending on the irradiation dose, an increase in weight, height and deformation force parameters of pan breads made of it.     

Effect of Coconut and Chestnut Flour Supplementations on Texture,Nutritional and Sensory Properties of Baked Wheat Based Bread

Wheat bread, produced by the single-phase method, is a common food consumed all over the world. Due to changes in lifestyle and nutritional trends, alternative raw materials are sought to increase the nutritional value and improve the taste of daily consumed products. Additionally, customers seek a wide variety of foods, especially when it comes to basic foods. Nuts, such as coconuts or chestnuts, might provide an attractive flavour with benefits to the nutritional quality. In this study, the effect of substituting wheat flour with coconut or chestnut flour (flour contribution level: 5, 10, 15, 30, 50% w/w), was evaluated in terms of the breads specific volume, texture, colour, nutritional composition, and dietary fibre fraction contents. Moreover, a sensory evaluation was conducted to assess potential consumer acceptance. Based on the consumer’s perception, the overall acceptance of bread with 15% w/w of coconut and chestnut flour was in privilege compared to the control sample. As a result, taking all of the tested parameters into account, the breads with 5, 10, and 15% supplementation of chestnut or coconut flour were still of good quality compared to the wheat bread and their fibre content was significantly higher.     

Changes in Antioxidant Properties and Amounts of Bioactive Compounds during Simulated In Vitro Digestion of Wheat Bread Enriched with Plant Extracts

Cereal preparation can be an excellent source of substances with proven health-promoting properties. Unfortunately, some types of bread, such as white flour bread, are devoid of many valuable nutrients. Therefore, it is necessary to look for ways to increase its density and nutritional value. The aim of the study was to investigate the effect of stabilized plant extracts on the quality of bread, its antioxidant activity and polyphenol content, and to evaluate the stability of bioactive compounds and antioxidant activity during in vitro digestion. The research material was the wheat bread baked with spray dried microcapsules of hawthorn bark, soybeans and onion husks in maltodextrin or inulin carriers. The addition of plant extracts resulted in the presence of phenolic compounds in the wheat bread, and its antioxidant activity significantly increased. There was no significant difference in antioxidant activity between breads containing microcapsules with different carriers. During in vitro digestion, procyanidins and isoflavones in bread were more resistant to the digestive processes than other compounds. The antioxidant activity during simulated digestion was the highest at the stage of gastric digestion, and its value depended on the extract used and the analytical method applied.     

Guidelines for buckwheat enriched bread

Thermal analysis was used to check the role of the main components of buckwheat flour (polysaccharides and proteins) to assess guidelines for novel recipes for bread from wheat and buckwheat flour blends with improved nutritional properties. The structure-related poor protein quality, namely, the lack of network-forming links, severely limits the use of buckwheat flours in bread-making. Data from TG and DSC analysis indicate that the introduction of a de-hulling step in the buckwheat milling diagram and the addition of some buckwheat polysaccharide fractions, isolated from the buckwheat husk, that contribute to the formation of the crumb structure thanks to their effect on the phase separation driven by the thermodynamic incompatibility with wheat gluten proteins, allows one to tune opposite effects and obtain bread from de-hulled buckweat/wheat flour blends with alveolar distribution much close that of the wheat bread.     

A fast and reliable method for the quantitative determination of benzimidazoles and metabolites in milk by LC-MS/MS with on-line sample treatment

A method to detect the presence of common wheat in durum wheat flour samples was developed and tested. Flour samples, or ground wheat samples, were digested by pepsin and chymotrypsin, and the peptide mixture obtained was analyzed by LC/ESI-MS and LC/ESI-MS/MS, which led to the identification of two marker peptides. One peptide was coded only in the DD genome, and thus present only in common wheat; the second was present in all wheat samples (both common and durum), so it was used as marker of the total wheat content. The ratio of the chromatographic areas of these two peptides, as determined by LC/ESI-MS, was related to the proportion of common wheat in the sample using a calibration curve that was constructed with standards of known composition. The proportions of common wheat in samples obtained by mixing different common and durum wheat varieties were accurately determined by this method. Finally, the method was applied in a survey of several durum wheat flour brands present on the Italian market. The results of the survey revealed that contamination of durum wheat flour with common wheat is commonplace.     

Effect of Added Brewer’s Spent Grain on the Baking Value of Flour and the Quality of Wheat Bread

This study was undertaken to determine the effect of the partial replacement of wheat flour (WF) with barley brewer’s spent grain (BBSG) and barley-buckwheat brewer’s spent grain (BBSG + B) on dough quality and bread properties, including nutritional value. The contents of brewer’s spent grain (BSG) in the blend with wheat flour were 0, 10, and 20%. The quality of the flour blends was assessed with intermediate methods and based on laboratory baking. Analyses were also carried out to determine contents of basic nutrients and energy value. The replacement of part of wheat flour with BBSG and BBSG + B diminished gluten yield and deteriorated its quality (a decreased sedimentation value and stability, and increased dough softening). Changes were also observed in the starch-enzymatic system, resulting in a decreased falling number and maximum paste viscosity. Breads containing both BSG types featured higher yield and lower loaf volume. They had also higher contents of protein, dietary fibre, fat, and ash as well as a lower energy value compared to the wheat bread. Considering the organoleptic traits of breads, the 10% replacement of wheat flour with BSG is recommended in the blend. The BBSG + B was found to elicit more beneficial effects on bread properties than BBSG.     

Near infrared spectroscopy and multivariate analysis to evaluate wheat flour doughs leavening and bread properties

A mixture design of experiment approach was followed to explore formulation effects on the technological properties of wheat flours optimized for industrial bread-making purposes. Ten different flour mixtures were investigated by means of near infrared spectroscopy (NIRS) to obtain information on flour performance in a critical phase such as dough leavening. For each mixture, a laboratory-scale bread making experiment was carried out according to a standardized recipe and the leavening phase of each dough sample was monitored by means of NIRS at different times. Parallel factor analysis (PARAFAC) was used to highlight the existence of differences among the mixtures on the basis of NIR spectrum variability with respect to the leavening time. Additionally, the relationship among the 3-way NIR dataset and some parameters measured on the baked bread loaves (dimensions, volume, weight) was investigated by means of the n-way extension of partial least squares regression (nPLS), in order to evaluate product properties from its leavening step and mixture formulation. The results give better insight on the relationships among wheat flour formulation and its performance in the leavening phase and as far as some properties of the final product are concerned, thus offering a way to monitor the leavening phase and give information on its influence on the final product properties.     

Development and Optimization of Djulis Sourdough Bread Fermented by Lactic Acid Bacteria for Antioxidant Capacity

This study developed a nutritionally valuable product with bioactive activity that improves the quality of bread. Djulis (Chenopodium formosanum), a native plant of Taiwan, was fermented using 23 different lactic acid bacteria strains. Lactobacillus casei BCRC10697 was identified as the ideal strain for fermentation, as it lowered the pH value of samples to 4.6 and demonstrated proteolysis ability 1.88 times higher than controls after 24 h of fermentation. Response surface methodology was adopted to optimize the djulis fermentation conditions for trolox equivalent antioxidant capacity (TEAC). The optimal conditions were a temperature of 33.5 °C, fructose content of 7.7%, and dough yield of 332.8, which yielded a TEAC at 6.82 mmol/kg. A 63% increase in TEAC and 20% increase in DPPH were observed when compared with unfermented djulis. Subsequently, the fermented djulis was used in different proportions as a substitute for wheat flour to make bread. The total phenolic and flavonoid compounds were 4.23 mg GAE/g and 3.46 mg QE/g, marking respective increases of 18% and 40% when the djulis was added. Texture analysis revealed that adding djulis increased the hardness and chewiness of sourdough breads. It also extended their shelf life by approximately 2 days. Thus, adding djulis to sourdough can enhance the functionality of breads and may provide a potential basis for developing djulis-based functional food.     

Effect of the Addition of Dried Dandelion Roots (Taraxacum officinale F. H. Wigg.) on Wheat Dough and Bread Properties

Dried and crushed dandelion roots (Taraxacum officinale F. H. Wigg.) (TO) were used as a formulation additive (at the amount of 0, 1, 3, 4, 5, and 6 g 100 g⁻¹ flour) to wheat bread. The farinographic properties of the dough and the physical and chemical properties of the bread were evaluated. It was found that the addition of dried flour caused a significant decrease in water absorption by the flour (1% and higher TO level), an increase in the development time (from 2% to 5% TO addition) and dough stability (3% and 4% TO level), and an increase in dough softening (4% and higher TO level). As the substitution of TO for wheat flour increased, there was a gradual decrease in loaf volume, an increase in specific weight and crumb hardness, and a darkening of the crumb color. The total polyphenol content increased linearly with the percentage increase of dried root additions TO from 0.290 to 0.394 mg GAE g⁻¹ d.m_., which translated into an increase in the antioxidant activity of the bread. It was found that dried crushed roots of Taraxacum officinale can be a recipe additive for wheat bread; however, due to their specific smell and bitter aftertaste, the level of this additive should not exceed 3 g 100 g⁻¹ flour.     

Qualitative and quantitative determination of peptides related to celiac disease in mixtures derived from different methods of simulated gastrointestinal digestion of wheat products

During wheat digestion, gluten-derived proteolytic resistant peptides are generated, some of them involved in celiac disease. In vitro digestion models able to mimic the peptides generated in the human gastrointestinal tract are extremely useful to assess the pathogenicity of wheat-derived products. In this paper, samples belonging to three different durum wheat varieties were taken at six different steps of the pasta production chain and two different digestion models present in the literature were assessed on the different samples: a more complex one using artificial fluids simulating the exact composition of digestive juices, and a simplified method based on a peptic-tryptic/chymotryptic treatment of wheat ethanolic extract. An extensive characterization of the peptides generated using two in vitro digestion models was performed through LC-MS/MS techniques and the two methods were compared in order to evaluate qualitative and quantitative differences and their possible implications for varietal screening. Strong differences in the type of peptides produced with the two methods were detected, indicating that the simplified method can still be used for a varietal screening but is not representative of the peptides really generated after physiological human digestion. Results indicate a clear necessity of physiologically accurate models for simulating human gastrointestinal digestion of wheat products.

Physicochemical Properties of Bread Partially Substituted with Unripe Green Banana (Cavendish spp.) Flour

This study aimed to utilize unripe green bananas obtained from those that were graded as unacceptable for export. Bread was selected as the product model for the application of banana flour. As carbohydrates and other functional active compounds make up the main composition of green bananas, unripe banana flour (UBF) was prepared and characterized. The chemical composition, physico-chemical properties, and functional properties of UBF, as well as its application in bread for wheat flour (WF) substitution at different levels, were investigated. Quality attributes of the bread were determined. High carbohydrate (89%), total dietary fiber (7%), ash (2%), potassium content and radical scavenging activity were found in UBF bread, while protein (15%) and fat contents (0.9%) were higher in WF bread (p < 0.05). Starch granules of different sizes and shapes (round, long and oblong) were observed in the starch from UBF bread. Solubility, swelling power, and the water absorption capacity of WF bread were greater than UBF bread (p < 0.05). The gelatinization enthalpy (ΔH) was 0.69 and 5.00 J/g for WF and UBF, respectively. The rapid viscoanalyzer (RVA) pasting profile showed that UBF bread had a higher pasting temperature, peak viscosity, breakdown, and final viscosity than WF bread (p < 0.05). Increasing the level of UBF caused an increase in bread hardness and a decrease in loaf volume (p < 0.05). We show that UBF can be considered a value-added product with health-promoting properties. The utilization of UBF as a functional food ingredient will benefit the consumer.     

Survey of selected materials for use as an organic nutrient standard

Summary There is a need for food based reference materials characterized for organic nutrient content, since very few are presently available. A series of twelve food matrices has been prepared by Agriculture Canada as Candidate Reference Materials. This paper reports a survey of the organic nutrient content of these twelve materials which include bovine muscle powder, corn starch, hard red spring wheat flour, soft winter wheat flour, white granulated sugar, whole milk powder, wheat gluten, potato starch, corn bran, durum wheat flour, whole egg powder, and microcrystalline cellulose. Whole egg, bovine muscle and whole milk powder appear to be best suited for further development as organic nutrient standards.

---

Überblick über ausgewählte Materialien zur Verwendung als Standards für organische Nährstoffe

---

Contribution Number 88-65 from Land Resource Research Center     

Nutritional Value and Biological Activity of Gluten-Free Bread Enriched with Cricket Powder

Cricket powder, described in the literature as a source of nutrients, can be a valuable ingredient to supplement deficiencies in various food products. Work continues on the implementation of cricket powder in products that are widely consumed. The aim of this study was to obtain gluten-free bread with a superior nutritional profile by means of insect powder addition. Gluten-free breads enriched with 2%, 6%, and 10% of cricket (Acheta domesticus) powder were formulated and extensively characterized. The nutritional value, as well as antioxidant and β-glucuronidase activities, were assessed after simulated in vitro digestion. Addition of cricket powder significantly increased the nutritional value, both in terms of the protein content (exceeding two-, four-, and seven-fold the reference bread (RB), respectively) and above all mineral compounds. The most significant changes were observed for Cu, P, and Zn. A significant increase in the content of polyphenolic compounds and antioxidant activity in the enriched bread was also demonstrated; moreover, both values additionally increased after the digestion process. The total polyphenolic compounds content increased about five-fold from RB to bread with 10% CP (BCP10), and respectively about three-fold after digestion. Similarly, the total antioxidant capacity before digestion increased about four-fold, and after digestion about six-fold. The use of CP also reduced the undesirable activity of β-glucuronidase by 65.9% (RB vs. BCP10) in the small intestine, down to 78.9% in the large intestine. The influence of bread on the intestinal microflora was also evaluated, and no inhibitory effect on the growth of microflora was demonstrated, both beneficial (Bifidobacterium and Lactobacillus) and pathogenic (Enterococcus and Escherichia coli). Our results underscore the benefits of using cricket powder to increase the nutritional value and biological activity of gluten-free food products.     

Ultra‐high performance liquid chromatography tandem mass spectrometry for the detection of durum wheat contamination or adulteration

In this work, an ultra‐performance liquid chromatography electrospray ionization (UPLC‐ESI)‐MS/MS methodology based on multiple reaction monitoring (MRM) for the selective and sensitive detection and quantification of durum wheat adulteration has been developed and fully validated. The targeted analysis was performed by monitoring specific transitions at m/z 543.7 > 657.4 and m/z 543.7 > 299.2 of a species‐specific marker derived from a tryptic peptide of puroindoline a (Pin‐a), a cysteine‐rich protein selectively present only in common wheat. In addition, two transitions at m/z 500.4 > 725.4 and m/z 500.4 > 561.9 of a reference peptide belonging to purothionin A‐1, present in both species, were also monitored. The calibration curves obtained on binary mixtures with known percentages of common/durum wheat flours showed linearity (coefficient of regression, r ≥ 0.99) over concentrations that ranged between 80 and 1%. The limit of detection (LOD) and limit of quantification (LOQ) for the Pin‐a marker in wheat flours were 0.01 and 0.03%, respectively. The identified Pin‐a marker was also found to be highly diagnostic for the quantification of common wheat in raw materials (kernels) and processed products (pasta), thus offering new opportunities to assess food authenticity. Copyright © 2014 John Wiley & Sons, Ltd.     

Folate analysis in foods by UPLC-MS/MS: development and validation of a novel, high throughput quantitative assay; folate levels determined in Australian fortified breads

An ultra-performance liquid chromatography-tandem mass spectrometry method was developed, optimised and validated for the quantification of synthetic folic acid (FA), also called pteroyl-l-glutamic acid or vitamin B9 and naturally occurring 5-methyltetrahydrofolate (5-MTHF) found in folate-fortified breads. Optimised sample preparation prior to analysis involved addition of ¹³C₅ labelled internal standards, treatments with α-amylase and rat serum, solid-phase extraction using aromatic-selective cartridges and ultra-filtration. Analytes were separated on a Waters ACQUITY HSS T3 column during a 6-min run and analysed by positive ion electrospray selected reaction monitoring MS/MS. Standard calibration curves for the two analytes were linear over the range of 0.018–14 μg FA/g of fresh bread (r ² = 0.997) and 9.3–900 ng 5-MTHF/g of fresh bread (r ² = 0.999). The absolute recoveries were 90% and 76% for FA and 5-MTHF, respectively. Intra-day coefficients of variation were 3% for FA and 18% for 5-MTHF. The limit of detection was 9.0 ng/g for FA and 4.3 ng/g for 5-MTHF, determined using pre-extracted tapioca starch as the blank matrix. The assay is rugged, fast, accurate and sensitive, applicable to a variety of food matrices and is capable of the detection and quantification of the naturally occurring low levels of 5-MTHF in wheat breads. The findings of this study revealed that the FA range in Australian fortified breads was 79–110 μg/100 g of fresh bread and suggest that the flour may not have the mandated FA fortification level (200–300 μg/100 g of flour), though this cannot be determined conclusively from experimental bread data alone, as variable baking losses have been documented by other authors.     

Durum wheat adulteration detection by NIR spectroscopy multivariate calibration

In the present work, we explored the possibility of using near-infrared spectroscopy in order to quantify the degree of adulteration of durum wheat flour with common bread wheat flour. The multivariate calibration techniques adopted to this aim were PLS and a wavelet-based calibration algorithm, recently developed by some of us, called WILMA. Both techniques provided satisfactory results, the percentage of adulterant present in the samples being quantified with an uncertainty lower than that associated to the Italian official method. In particular the WILMA algorithm, by performing feature selection, allowed the signal pretreatment to be avoided and obtaining more parsimonious models.     

Technological Changes in Wheat-Based Breads Enriched with Hemp Seed Press Cakes and Hemp Seed Grit

Hemp and hemp seed press cake—a by-product of hemp oil production—are high-protein, gluten-free raw materials that are often used to enhance the nutritional value of breads. The addition of hemp materials, however, often negatively impacts the technological parameters of breads. Consequently, this study investigated whether and how much the addition of various by-products of hemp seed press cakes to wheat bread mixtures adversely affects the texture and colour profile. The texture profile and colour were determined using a texture analyser and tristimulus measurements. The particle size of raw materials was also measured. Principal component analysis was then used to visualise the correlation between all measured values as well as nutritional parameters. The results showed that the addition of only 1% of some hemp raw materials caused significant technological changes (p > 0.05). Hemp raw materials increased bread hardness and decreased elasticity. The colour of breads containing 1% hemp was also visibly darker than the reference bread. The addition of more hemp led to further darkening and the deterioration of the technological parameters of the products. Consequently, while various hemp materials have high nutritional value, a balance with sensory properties, e.g., textural and colour, has to be reached.     

Effect of lentil and bean flours on rheological and baking properties of wheat dough

The potential of legume flours (lentil and bean) in bakery applications was investigated. The study indicated that legume flours were characterised by high protein (27.30–27.35 mass %) and total dietary fibre (14.91–21.52 mass %), relatively high water holding capacity (4.71–5.42 g g^?1), and good emulsifying properties (emulsifying capacity: 32.73–46.96 cm³ per 100 cm³ and emulsion stability: 60.52–90.90 cm³ per 100 cm³). Fine wheat flour was partially substituted with 10 mass %, 20 mass %, and 30 mass % levels of lentil and bean flours in order to study their farinographic characteristics and baking behaviour. The addition of legume flours increased water absorption capacity (from 58.50 mass % to 74.90 mass %) and dough development time (from 3.50 min to 5.50 min), whereas dough stability was reduced (from 6.67 min to 2.30 min). The presence of legume flours in dough negatively affected the physical parameters of baked rolls and resulted in the reduction in volume, specific volume, and cambering. Sensory evaluation showed that the most acceptable baked rolls were obtained when the wheat-legume blend flour containing 10 mass % of legume flour was applied. Higher levels of legume flours in the products adversely affected the shape, crust colour, crumb elasticity, and hardness of the final products.