Tollmien-Schlichting Waves in a Hypersonic Boundary Layer Flow in the Neighborhood of a Cooled Surface

A nonlinear time-dependent model of the development of longwave perturbations in a hypersonic boundary layer flow in the neighborhood of a cooled surface is constructed. The pressure in the flow is assumed to be induced the combined variation of the thicknesses of the near-wall and main parts of the boundary layer. Numerical and analytic solutions are obtained in the linear approximation. It is shown that if the main part of the boundary layer is subsonic as a whole, its action reduces the perturbation damping upstream and the perturbation growth downstream, while a supersonic, as a whole, main part of the boundary layer creates the opposite effects. An analysis of the solutions obtained makes it possible to conclude that the asymptotic model proposed can describe the three-dimensional instability of the Tollmien-Schlichting waves.     

Numerical Modeling of the Development of a Streaky Structure in a Boundary Layer at a High Freestream Turbulence Level

The disturbances generated by external turbulence in the boundary layer on a flat plate set suddenly in motion are determined. A turbulent flow calculated by direct numerical simulation is taken as the initial conditions. The solution obtained simulates the initial stage of laminar-turbulent transition in the flat-plate boundary layer at a high turbulence level in the oncoming flow. The solution makes it possible to estimate the effects of different factors, such as nonstationarity, nonlinearity, and the parameters of the freestream velocity fluctuation spectrum, on disturbance enhancement in the boundary layer.     

Solidification and Flow of a Binary Alloy Over a Moving Substrate

We study the solidification and flow of a binary alloy over a horizontally moving substrate. A situation in which the solid, liquid and mushy regions are separated by the stationary two-dimensional interfaces is considered. The self-similar solutions of the governing boundary layer equations are obtained, and their parametric dependence is analysed asymptotically. The effect of the boundary layer flow on the physical characteristics is determined. It is found that the horizontal pulling and the resulting flow in the liquid enhance the formation of the mushy region.     

A quasi-similarity analysis of the turbulent boundary layer on a flat plate

The partial differential equation of the boundary layer on a flat plate are simplified by using the universal variables for turbulent flow. For laminar flow this gives boundary layer having a finite thickness and a friction coefficient differing by a few percent from the Blasius value. For a turbulent flow a differential equation for the velocity distribution is obtained with a parameter which varies slowly with the streamwise coordinate. The numerical value of this parameter is determined as an eigenvalue of the differential equations giving a velocity profile which evolves as the boundary layer thickens. Numerical calculations using a simple eddy viscosity model gave results in very good agreement with experiment.     

Natural Convection Induced by a Heated Vertical Plate Embedded in a Porous Medium with Transpiration: Local Thermal Non-equilibrium Similarity Solutions

This paper is concerned with the thermal non-equilibrium free convection boundary layer, which is induced by a vertical heated plate embedded in a saturated porous medium. The effect of suction or injection on the free convection boundary layer is also studied. The plate is assumed to have a linear temperature distribution, which yields a boundary layer of constant thickness. On assuming Darcy flow, similarity solutions are obtained for governing the steady laminar boundary layer equations. The reduced Nusselt numbers for both the solid and fluid phases are calculated for a wide range of parameters, and compared with asymptotic analyses.     

DNS of a Laminar Separation Bubble in the Presence of Oscillating External Flow

A three-dimensional Direct Numerical Simulation (DNS) of a laminar separation bubble in the presence of oscillating flow is performed. The oscillating flow induces a streamwise pressure gradient varying in time. The special shape of the upper boundary of the computational domain, together with the oscillating pressure gradient causes the boundary layer flow to alternately separate and re-attach. When the inflow decelerates, the shear layer starts to separate and rolls up. Simultaneously the flow becomes 3D. After a transient period, the phase-averaged reverse flow inside the separation bubble reaches speeds ranging from 20 up to 150% of the free-stream velocity. During these phases, the flow is absolutely unstable and self-sustained turbulence can exist. When the inflow starts to accelerate, a spanwise roll of turbulent flow is shed from the shear layer. Shortly after this, the remainder of the separation bubble moves downstream and rejoins with the shed turbulent roll. During the flow-acceleration phase, a patch of laminar boundary layer flow is obtained. Along the flat plate, a series of turbulent patches of flow travelling downstream, separated by laminar flow can be observed, reminiscent of boundary layer flow in a turbine cascade with periodically appearing free-stream disturbances.     

Development of slow disturbances in a hypersonic boundary layer

The mechanisms of development of slow time-dependent disturbances in the wall region of a hypersonic boundary layer are established and a diagram of the disturbed flow patterns is plotted; the corresponding nonlinear boundary value problem is formulated for each of these regimes. It is shown that the main factors that form the disturbed flow are the gas enthalpy near the body surface, the local viscous-inviscid interaction level, and the type, either subsonic or supersonic, of the boundary layer as a whole. Numerical and analytical solutions are obtained in the linear approximation. It is established that enhancement of the local viscous-inviscid interaction or an increased role for the main supersonic region of the boundary layer makes the disturbed flow by and large “supersonic”: the upstream propagation of the disturbances becomes weaker, while their downstream growth is amplified. Contrariwise, local viscous-inviscid interaction attenuation or an increased role for the main subsonic region of the boundary layer has the opposite effect. Surface cooling favors an increased effect of the main region of the boundary layer while heating favors an increased wall region effect. It is also found that in the regimes considered disturbances travel from the turbulent flow region downstream of the disturbed region under consideration counter to the oncoming flow, which may be of considerable significance in constructing the nonlinear stability theory.     

The laminar boundary layer near a body corner point

A method is developed for calculating the characteristics of a laminar boundary layer near a body contour corner point, in the vicinity of which the outer supersonic stream passes through a rarefaction flow. In the study we use the asymptotic solution of the Navier-Stokes equations in the region with large longitudinal gradients of the flow functions for large values of the Reynolds number, the general form of which was used in [1].The pressure, heat flux, and friction distributions along the body surface are obtained. For small pressure differentials near the corner the solution of the corresponding equations for small disturbances is obtained in analytic form.The conventional method for studying viscous gas flow near body surfaces for large values of the Reynolds number is the use of the Prandtl boundary layer theory. Far from the body the asymptotic solution of the Navier-Stokes equations in the first approximation reduces to the solution of the Euler equations, while near the body it reduces to the solution of the Prandtl boundary layer equations. The characteristic feature of the boundary layer region is the small variation of the flow functions in the longitudinal direction in comparison with their variation in the transverse direction. However, in many cases this condition is violated.The necessity arises for constructing additional asymptotic expansions for the region in which the longitudinal and transverse variations of the flow functions are quantities of the same order. The general method for constructing asymptotic solutions for such flows with the use of the known method of outer and inner expansions is presented in [1].In the following we consider the flow in a laminar boundary layer for the case of a viscous supersonic gas stream in the vicinity of a body corner point. Behind the corner the flow separates from the body surface and flows around a stagnant zone, in which the pressure differs by a specified amount from the pressure in the undisturbed flow ahead of the point of separation. A pressure (rarefaction) disturbance propagates in the subsonic portion of the boundary layer upstream for a distance which in order of magnitude is equal to several boundary layer thicknesses. In the disturbed region of the boundary layer the longitudinal and transverse pressure and velocity disturbances are quantities of the same order. In this study we construct additional asymptotic expansions in the first approximation and calculate the distributions of the pressure, friction stress, and thermal flux along the body surface.     

Experimental observations of the thermal flow around a square obstruction on a vertical wall in a differentially heated cavity

The transient thermal boundary layer flow around a square obstruction placed at the middle of the hot wall in a differentially heated cavity is visualized using a shadowgraph technique. The results show that the thermal boundary layer flow, which is blocked by the obstruction, firstly forms an intrusion head under the obstruction (the lower intrusion head). Subsequently, the lower intrusion head bypasses the obstruction and reattaches to the down-stream boundary. During the reattachment process, a more complicated flow is induced, and eventually both the lower intrusion head and the thermal boundary layer destabilize. After the lower intrusion head is convected away, the thermal boundary layer flow re-stabilizes. At the quasi-steady state, the thermal boundary layer forms a double-layer structure, which is split into two sections by the obstruction. It is demonstrated that both the transient processes and the quasi-steady state flow structures of the thermal boundary layer are significantly altered by the obstruction in comparison with the case without the obstruction.     

Visco-elastic boundary layer flow past a stretching plate with suction and heat transfer

In this paper the study of visco-elastic (Walters' liquid B model) flow past a stretching plate with suction is considered. Exact solutions of the boundary layer equations of motion and energy are obtained. The expressions for the coefficient of skin friction and of boundary layer thickness are obtained.     

Interaction of a turbulent boundary layer with a shock wave at transonic flow velocities

An asymptotic theory of the interaction of a turbulent boundary layer on a plate with a normal shock wave of low intensity has been constructed in various studies [1–4] under the assumption that the averaged velocity of the particles in the boundary layer in front of the interaction region satisfies a logarithmic law. In the present paper a different approach to this problem is proposed based on a power law of the velocity in the undisturbed boundary layer. The obtained results give different estimates for not only the sizes of the characteristic flow regions in the interaction region but also for the shock intensity leading to boundary layer separation.     

Mean flow generation in a two-layer system under circularly polarized vibrations

The behavior of a system of two immiscible isothermal fluids in a cylindrical reservoir under circularly polarized vibrations orthogonal to the cylinder axis is considered. The fluctuating flow is studied with account for dissipation in the near-interface vortex layer. Different mean flow generation mechanisms are discussed. It is shown that the main role in the generation is played by nonlinear processes in the near-interface boundary layer, which can be taken into accounted by applying effective boundary conditions. The mean flow structure and intensity are studied. The results obtained are compared with experimental data.     

Theory of a calorimeter at a permeable surface

The calorimetric method for determining the heat flux at a permeable (or sublimating) surface requires the solution of several specific heat-transfer problems, since the calorimeter, bringing about discontinuities in the boundary conditions at the wall (the cessation of blowing, a jump in the temperature of the wall and of its catalytic properties, etc.), introduces perturbations into the boundary layer and measures a heat flux differing from the flux in the absence of a calorimeter. Within the framework of the boundary layer, schematization of such problems is usually based on the isolation of an internal boundary layer (sublayer), which is the region of the effect of the new phenomena at the wall, and develops in the main boundary layer [1–5]. To take account of the effect of the inhomogeneity of the flow in the main boundary layer on heat transfer through the sublayer, here the method of mean-mass values is used, which, as has been demonstrated using various examples in [4] and in the present work, has a good degree of accuracy (even in the neighborhood of the breakaway point) and is suitable for the profiles of an inhomogeneous flow of rather general form. Based on this, for a laminar boundary layer finite formulas are obtained below for the heat flux to a calorimeter of relatively small size at a permeable wall, which can be used for the analysis of experiments.     

Lie group analysis for thermophoretic and radiative augmentation of heat and mass transfer in a Brinkman-Darcy flow over a flat surface with heat generation

A boundary layer analysis is presented to investigate numerically the effects of radiation,thermophoresis and the dimensionless heat generation or absorption on hydromagnetic flow with heat and mass transfer over a flat surface in a porous medium.The boundary layer equations are transformed to non-linear ordinary differential equations using scaling group of transformations and they are solved numerically by using the fourth order Runge-Kutta method with shooting technique for some values of physical parameters.Comparisons with previously published work are performed and the results are found to be in very good agreement.Many results are obtained and a representative set is displayed graphically to illustrate the influence of the various parameters on the dimensionless velocity,temperature and concentration profiles as well as the local skin-friction coefficient,wall heat transfer,particle deposition rate and wall thermophoretic deposition velocity.The results show that the magnetic field induces acceleration of the flow,rather than deceleration(as in classical magnetohydrodynamics(MHD) boundary layer flow) but to reduce temperature and increase concentration of particles in boundary layer.Also,there is a strong dependency of the concentration in the boundary layer on both the Schmidt number and mass transfer parameter.     

Development of the boundary layer on a plate in a rotating system

A numerical investigation in the approximation of boundary layer theory has been made of the development of the flow near the surface of a rotating plate in a two-dimensional flow with rectilinear streamlines perpendicular to the leading edge in a rotating coordinate system attached rigidly to the plate. In an earlier investigation [1] using the approximate method of integral relations, Kurosaka obtained and described quantitatively a transition from a Blasius boundary layer to an Eckmann boundary layer in the form of three-dimensional oscillations. The solution described in the present paper confirms the oscillatory nature of the development of the boundary layer, but the quantitative results differ strongly from Kurosaka's.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 3, pp. 154–157, May–June, 1982.     

The effect of anisotropic permeability on free convective boundary layer flow in porous media

The effect of an anisotropic permeability on thermal boundary layer flow in porous media is studied. The convective flow is induced by a vertical, uniformly heated surface embedded in a fluid-saturated medium. A leading-order boundary layer theory is presented. It is shown that the thickness of the resulting boundary layer flow is different from that obtained in an isotropic porous medium. In general, an anisotropic permeability induces a fluid drift in the spanwise direction, the strength of which depends on the precise nature of the anisotropy. Conditions are found which determine whether or not the boundary layer flow is three-dimensional.     

A numerical simulation of boundary layer effects in a shock tube

A numerical scheme is used to investigate boundary layer effects in a shock tube. The method consists of a mixture of Roe's approximate Riemann solver and central differences for the convective fluxes and central differences for the viscous fluxes and is implicit in one space dimension. Comparisons are made with experimental data and with solutions obtained via boundary layer equations. Examination of the calculated flow field explains the observed behaviour and highlights the approximate nature of boundary layer solutions.     

Heat transfer on a cylinder in accelerated slip flow

The axisymmetric laminar boundary layer flow along the entire length of a semi-infinite stationary cylinder under an accelerated free-stream is investigated. Considering flow at reduced dimensions, the boundary layer equations are developed with the conventional no-slip boundary condition for tangential velocity and temperature replaced by a linear slip-jump boundary condition. Asymptotic series solutions are obtained for the heat transfer coefficient in terms of the Nusselt number. These solutions correspond to prescribed values of the momentum and temperature slip coefficients and the index of acceleration. Heat transfer at both small and large axial distances is determined in the form of series solutions; whereas at intermediate distances, exact and interpolated numerical solutions are obtained. Using these results, the heat transfer along the entire cylinder wall is evaluated in terms of the parameters of acceleration and slip.     

Gas injection from the surface of a triangular plate in a hypersonic flow

The flow formed as a result of gas injection through the permeable surface of a triangular plate is investigated in the regime of strong viscous-inviscid interaction between the hypersonic flow and the laminar boundary layer. The features of the flow past strongly cooled surfaces with the formation of supercritical and subcritical flow regions in the boundary layer are studied. The injected gas distribution ensuring the existence of self-similar solutions in the supercritical flow regions is obtained. Moscow. Translated from Izvestiya Rossiiskoi Akademii Nauk, Mekhanika Zhidkosti i Gaza, No. 1, pp. 125–133, January–February, 2000. The study was carried out with the support of the Russian Foundation for Basic Research (project No. 96-01-01391).     

Analytical investigation of boundary layer growth and swirl intensity decay rate in a pipe

In this research, the developing turbulent swirling flow in the entrance region of a pipe is investigated analytically by using the boundary layer integral method. The governing equations are integrated through the boundary layer and obtained differential equations are solved with forth-order Adams predictor-corrector method. The general tangential velocity is applied at the inlet region to consider both free and forced vortex velocity profiles. The comparison between present model and available experimental data demonstrates the capability of the model in predicting boundary layer parameters (e.g. boundary layer growth, shear rate and swirl intensity decay rate). Analytical results showed that the free vortex velocity profile can better predict the boundary layer parameters in the entrance region than in the forced one. Also, effects of pressure gradient inside the boundary layer is investigated and showed that if pressure gradient is ignored inside the boundary layer, results deviate greatly from the experimental data.