Synthesis and properties of delafossite CuAlO<Subscript>2</Subscript> nanowires

Ultra-long and uniform CuAlO₂ nanowires were successfully synthesized within a porous anodic aluminum oxide template by means of sol–gel method at 900 °C. The results of X-Ray diffraction indicate that the obtained CuAlO₂ nanowires have a single delafossite structure. The scanning electron microscopy and transmission electron microscopy show that the CuAlO₂ nanowires have a uniform diameter with about 50 nm and a length up to 10 μm. Room-temperature photoluminescence measurement of nanowires exhibits an ultraviolet near-band-edge emission around 350 nm (3.54 eV).     

Calculations of thermodynamic stability of CpCoC<Subscript>2</Subscript>B<Subscript>9</Subscript>H<Subscript>11</Subscript> cobaltacarborane isomers

Quantum-chemical calculations of the geometry and energies of nine possible isomers of 12-vertex cobaltacarborane CpCoC₂B₉H₁₁ (1) were carried out by the DFT method (PBEPBE/DGDZVP/DGA1). Thermodynamic stability of the isomers increases with increasing distance between the carbon atoms in the cage and is virtually independent of the position of the CpCo vertex. The relative stabilities of the 1,2,3-(17.57 kcal mol⁻¹), 1,2,4-(3.72 kcal mol⁻¹), and 1,2,9-isomers of 1 (0 kcal mol⁻¹) are similar to the corresponding values for the ortho (17.61 kcal mol⁻¹), meta (3.21 kcal mol⁻¹), and para isomers (0 kcal mol⁻¹) of carborane C₂B₁₀H₁₂. The results of the present study confirm a close similarity of the CpCo and BH fragments in metallacarborane chemistry. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 7, pp. 1557–1559, July, 2005.     

Low temperature thermodynamic properties of Gd<Subscript>2</Subscript>SrCo<Subscript>2</Subscript>O<Subscript>7</Subscript>

Summary Thermodynamic properties of a layered perovskite oxide Gd₂SrCo₂O₇ have been studied. Powder X-ray diffraction, electric resistivity, magnetic susceptibility and heat capacity measurements were carried out. The crystal structure was determined as I4/mmm. The temperature dependence of the magnetic susceptibility was fitted to the Curie-Weiss behavior with antiferromagnetic interaction. Spin state of Co³⁺ ion was derived to be intermediate spin state configuration (t_2g⁵e_g¹). The spin ordering was observed as a broad anomaly in the heat capacity curve with a peak at 2 K. The measured entropy was 35.47 J K^-1mol^-1, which was 65% of expected value. Thus the spin ordering should not be completed at the lowest temperature 0.2 K covered in the present experiments and/or some short range ordering remains at higher temperatures.     

High-temperature heat capacity and thermodynamic properties of Pb<Subscript>4</Subscript>V<Subscript>2</Subscript>O<Subscript>9</Subscript> and Pb<Subscript>8</Subscript>V<Subscript>2</Subscript>O<Subscript>13</Subscript>

The molar heat capacity of Pb₄V₂O₉ and Pb₈V₂O₁₃ in the temperature range 350–1000 K was measured by differential scanning calorimetry. It was determined that the plot C_p = f(T) for Pb₈V₂O₁₃ has an extremum within the range 416–516 K, which is due to a phase transition. A correlation was found between the heat capacity and composition of oxides in the PbO–V₂O₅ system. The data obtained allowed one to predict the specific heat capacity value for Pb(VO₃)₂.     

High-temperature heat capacity and thermodynamic properties of pyrovanadate Pb<Subscript>2</Subscript>V<Subscript>2</Subscript>O<Subscript>7</Subscript> and orthovanadate Pb<Subscript>3</Subscript>(VO<Subscript>4</Subscript>)<Subscript>2</Subscript>

The heat capacities of Pb₂V₂O₇ and Pb₃(VO₄)₂ as a function of temperature in the range 350–965 K have been studied by the differential scanning calorimetry method. The C_P = f(T) curve for Pb₂V₂O₇ is described by the equation C_p = (230.76 ± 0.51) + (73.60 ± 0.50)×10^-3T ? (18.38 ± 0.54)×10⁵T^-2 in the entire temperature range. For Pb₃(VO₄)₂, there is a well-pronounced extreme point in the C_P = f(T) curve at T = 371.5 K, which is caused by the existence of a structural phase transition. The thermodynamic properties of the oxide compounds have been calculated.     

Thermal stability of Bi<Subscript>2</Subscript>O<Subscript>3</Subscript>

Differential thermal analysis (DTA) and thermogravimetric analysis (TGA) of an α-Bi₂O₃ sample revealed staged phase transitions in the range 720–800°C (at 720, 780, and 800°C) and the elimination of oxygen to the composition Bi₂O_2.967 during heating to 895°C in air at 16 K/min. In dynamic vacuum (p = 1.33 Pa) at 780–800°C, Bi₂O₃ consecutively transforms to a phase with the cubic γ-Bi₂O₃ structure and tetragonal Bi₂O_2.3?2.4. In the latter, electron diffraction in a transmission electron microscope (ED/TEM) shows a superstructure with the superstructure vector q ₁₁₀ ≈ 1/9, which indicates an ordered arrangement of oxygen vacancies.     

Hydrothermal synthesis and thermodynamic properties of 2CaO·3B<Subscript>2</Subscript>O<Subscript>3</Subscript>·H<Subscript>2</Subscript>O

2CaO·3B₂O₃·H₂O which has non-linear optical (NLO) property was synthesized under hydrothermal condition and identified by XRD, FTIR and TG as well as by chemical analysis. The molar enthalpy of solution of 2CaO·3B₂O₃·H₂O in HCl·54.572H₂O was determined. From a combination of this result with measured enthalpies of solution of H₃BO₃ in HCl·54.501H₂O and of CaO in (HCl+H₃BO₃) solution, together with the standard molar enthalpies of formation of CaO(s), H₃BO₃(s), and H₂O(l), the standard molar enthalpy of formation of −(5733.7±5.2) kJ mol⁻¹ of 2CaO·3B₂O₃·H₂O was obtained. Thermodynamic properties of this compound were also calculated by a group contribution method.     

Surface and bulk conduction and thermodynamic properties of ionic salt CsH<Subscript>5</Subscript>(PO<Subscript>4</Subscript>)<Subscript>2</Subscript>

Transport properties of ionic salt CsH₅(PO₄)₂ are studied by the impedance method. The salt’s bulk conductivity ranges from 10^?8 to 10^?4 S cm^?1 in the temperature interval 90 to 145°C. The apparent activation energy is high (1.6–2.0 eV). The conductivity is slightly anisotropic: it is maximum in the [001] direction and minimum in the [100] direction (～5.6 and 1 times × 10^?6 S cm^?1, respectively, at 130°C). The conductivity of polycrystalline samples is higher by 1–2 orders of magnitude, and the activation energy drops to 1.05 eV due to the formation of a pseudoliquid layer with a high proton mobility at the intercrystallite boundary. The salt’s thermodynamic properties are examined by differential scanning calorimetry and thermogravimetry. No phase transitions are discovered in the salt up to the melting point (151.6°C), with the melting enthalpy equal to ～34 kJ mol^?1. The crystallization occurs at lower temperatures (107°C) and the crystallization enthalpy (?18 kJ mol^?1) is lower than the melting enthalpy. The melting is accompanied by slow decomposition of the salt. Factors affecting the proton transport in the salt are analyzed.     

Synthesis and structure of [UO<Subscript>2</Subscript>(C<Subscript>2</Subscript>O<Subscript>4</Subscript>){CONH<Subscript>2</Subscript>N(CH<Subscript>3</Subscript>)<Subscript>2</Subscript>}<Subscript>2</Subscript>]

The single crystals of [UO₂(C₂O₄){CONH₂N(CH₃)₂}₂] were synthesized and studied by X-ray diffraction. The crystals are monoclinic, a = 7.461(2) Å, b = 8.828(2) Å, c = 11.756(2) Å, β = 107.21(3)°, space group Pc, Z = 2, R = 2.94%. The structure comprises infinite chains [UO₂(C₂O₄){CONH₂N(CH₃)₂}₂] extended along [001] and corresponding to the AT¹¹M ₂ ¹ crystallochemical group (A = UO ₂ ²⁺ , T¹¹ = C₂O ₄ ^2? , M¹ = N,N-CONH₂N(CH₃)₂) of uranyl complexes. The chains are connected into a three-dimensional framework by hydrogen bonds involving the oxygen atoms of oxalate and uranyl ions and the N,N-dimethylcarbamide methyl groups.     

The thermodynamic properties of the [(Me<Subscript>3</Subscript>Si)<Subscript>7</Subscript>C<Subscript>60</Subscript>]<Subscript>2</Subscript> fullerene complex

The temperature dependence of the heat capacity C _p ^o of the [(Me₃Si)₇C₆₀]₂ fullerene complex was measured for the first time using precision adiabatic vacuum calorimetry over the temperature range 6.7–340 K and high-accuracy differential scanning calorimetry at 320–635 K. For the most part, the error in the C _p ^o values was about ±0.5%. An irreversible endothermic effect caused by the splitting of the dimeric bond between fullerene fragments and the thermal decomposition of the complex was observed at 448–570 K. The thermodynamic characteristics of this transformation were calculated and analyzed. Multifractal analysis of the low-temperature (T < 50 K) heat capacity was performed, and conclusions were drawn concerning the character of the heterodynamicity of the structure. The experimental data obtained were used to calculate the standard thermodynamic functions C _p ^o (T), H ^o (T) ? H ^o (0), S ^o (T) ? S ^o (0), and G ^o (T) ? H ^o (0) over the temperature range from T → 0 to 445 K and estimate the standard entropy of formation of the compound from simple substances at 298.15 K. The standard thermodynamic properties of [(Me₃Si)₇C₆₀]₂ are compared with those of the (C₆₀)₂ dimer, the [(η⁶-Ph₂)₂Cr]⁺[C₆₀]^?? fulleride, and the initial C₆₀ fullerene.     

Thermal stability of layered perovskite-like oxides NaNdTiO<Subscript>4</Subscript> and Na<Subscript>2</Subscript>Nd<Subscript>2</Subscript>Ti<Subscript>3</Subscript>O<Subscript>10</Subscript>

Thermal stabilities of layered perovskite-like oxides NaNdTiO₄ and Na₂Nd₂Ti₃O₁₀ were studied in the temperature ranges from 780 to 1100°C and from 1100 to 1400°C, respectively. Chemical mechanism of their thermal decomposition was proposed. Higher thermal stability of Na₂Nd₂Ti₃O₁₀ was rationalized on the basis of crystallochemical data.     

The stability and structure of (N<Subscript>2</Subscript>)<Subscript>j</Subscript>(H<Subscript>2</Subscript>O)<Subscript>i</Subscript> and (Ar)<Subscript>j</Subscript>(H<Subscript>2</Subscript>O)<Subscript>i</Subscript> clusters

The stability and structure of water clusters absorbing nitrogen molecules or argon atoms was analyzed by molecular dynamics simulation at 233 K. The (?μ/?i)_{V, T} derivative of the chemical potential, a value characterizing the stability of a cluster with respect to its size, depends linearly on the number of molecules i. According to this criterion, the clusters under study become stable near i = 40. The average length of H-bonds increases monotonically in the growing cluster of pure water and exhibits oscillatory behavior if the growing cluster contains N₂ molecules or Ar atoms. The number of H-bonds per molecule oscillates between one and six as the cluster size changes. These oscillations are damped in pure water and sustained for clusters containing impurities, especially argon.     

Isotherm,thermodynamic and kinetic studies of Sr<Superscript>2+</Superscript> adsorption on spherical TiO<Subscript>2</Subscript>/PAN composites

A spherical polyacrylonitrile–TiO₂ composite adsorbent was prepared and its strontium removal potential was investigated. The Langmuir equation fixed well the equilibrium data. The value of ∆H° = 8.943 kJ/mol and ∆G° = 6.291 kJ/mol at 298 K indicate that the adsorption of strontium onto TiO₂/PAN composite adsorbent is an endothermic and non-spontaneous reaction. The kinetic process was described by a pseudo-second-order rate model very well.     

Comparative study of the structural,optical, and electrical properties of CuAlO<Subscript>2</Subscript> thin films on Al<Subscript>2</Subscript>O<Subscript>3</Subscript> and YSZ substrates via chemical solution deposition

Single-phase delafossite CuAlO₂ thin films are deposited successfully on Al₂O₃ (001) and YSZ (100) substrates using the chemical solution method. X-ray diffraction data present that the CuAlO₂ film on the Al₂O₃ (001) substrate is epitaxial, whereas that on YSZ (100) is c-axis oriented; the same is also demonstrated by the HRTEM images and SAED patterns. Optical transmittance spectra exhibit that both films have high transparency in the visible region. However, in this region, the optical transmittance of the CuAlO₂ thin film deposited on (001) Al₂O₃ is inferior to that deposited on (100) YSZ. This optical anomaly can be attributed to surface scattering. Electrical transport measurements show that the resistivity of the film on (001) Al₂O₃ is one order lower than that on (100) YSZ, suggesting that in-plane orientation is significant in improving hole mobility.     

Specific heat on Sr<Subscript>2</Subscript>Nb<Subscript>2</Subscript>O<Subscript>7</Subscript> and Sr<Subscript>2</Subscript>Ta<Subscript>2</Subscript>O<Subscript>7</Subscript>

Summary Specific heats on the single crystals of Sr₂Nb₂O₇, Sr₂Ta₂O₇ and (Sr_1-xBa_x)₂Nb₂O₇ were measured in a wide temperature range of 2-600 K. Heat anomalies of a λ-type were observed at the incommensurate phase transition of T_INC (=495 K) on Sr₂Nb₂O₇ and at the super-lattice phase transition of T_SL (=443 K) on Sr₂Ta₂O₇; the transition enthalpies and the transition entropies were estimated. Furthermore, a small heat anomaly was observed at the low temperature ferroelectric phase transition of T_LOW (=95 K) on Sr₂Nb₂O₇. The transition temperature T_LOW decreases with increasing Ba content x and it vanishes for samples of x>2%.     

Thermal stability and catalytic properties of the composite amorphous Al<Subscript>2</Subscript>O<Subscript>3</Subscript>-nanocrystals ZrO<Subscript>2</Subscript>

Catalytic properties in relation to the hydrogen oxidation reaction and thermal stability of materials based on the nanocomposite amorphous Al₂O₃-nanocrystalline ZrO₂ were studied.     

Mechanism and kinetics of formation of La<Subscript>2</Subscript>SrFe<Subscript>2</Subscript>O<Subscript>7</Subscript> and Nb<Subscript>2</Subscript>SrFe<Subscript>2</Subscript>O<Subscript>7</Subscript>

Phase formation processes in the systems Ln₂O₃-SrO-Fe₂O₃ (Ln = La, Nd) in air in the temperature range 1200–1500°C were studied. The synthesis of the complex ferrites La₂SrFe₂O₇ and Nb₂SrFe₂O₇ involves the formation of the intermediate compounds LnFeO₃ and LnSrFeO₄ and occurs by the same mechanism as the synthesis of the corresponding aluminates, but much faster.     

Crystallization kinetics and thermal stability of an amorphous Fe<Subscript>77</Subscript>C<Subscript>5</Subscript>B<Subscript>4</Subscript>Al<Subscript>2</Subscript>GaP<Subscript>9</Subscript>Si<Subscript>2</Subscript> bulk metallic glass

The thermal stability, kinetics and glass forming ability of an Fe₇₇C₅B₄Al₂GaP₉Si₂ bulk amorphous alloy have been studied by differential scanning calorimetry. The activation energy, frequency factor and rate constant corresponding to the multiple crystallization steps were determined by the Kissinger method. X-ray diffraction and transmission electron microscopy studies revealed that the crystallization starts with the primary precipitation of α-Fe from the amorphous matrix. The kinetics of nucleation of the α-Fe nanoparticles was investigated by two different methods, i.e. isothermal annealing and continuous heating after partial annealing.     

NaBO<Subscript>2</Subscript>-Na<Subscript>2</Subscript>CO<Subscript>3</Subscript>-Na<Subscript>2</Subscript>MoO<Subscript>4</Subscript>-Na<Subscript>2</Subscript>WO<Subscript>4</Subscript> quaternary system

This is the first study of the NaBO₂-Na₂CO₃-Na₂MoO₄-Na₂WO₄ quaternary system by differential thermal analysis. Na₂[MoO_4(x)WO_{4(1 − x)}] solid solutions in the quaternary system are found to not decompose.     

Catalytic decomposition of H<Subscript>2</Subscript>O<Subscript>2</Subscript> in hydrophilic solvents: The kinetic aspect

Decomposition of hydrogen peroxide in organic hydrophilic solvents, catalyzed by cobalt(II) palmitate [Co(palm)₂], was studied by the method of inhibitors.