Marked differences in light-switch behavior of Ru(II) complexes possessing a tridentate DNA intercalating ligand

The tridentate ligand 3-(pyrid-2'-yl)dipyrido[3,2-a:2',3'-c]phenazine (pydppz) has been prepared in two steps by elaboration of 2-(pyrid-2'-yl)-1,10-phenanthroline. Both homoleptic [Ru(pydppz)(2)](2+) and heteroleptic [Ru(tpy)(pydppz)](2+) (tpy = 2,2';6',2' '-terpyridine) complexes have been prepared and characterized by (1)H NMR. The absorption and emission spectra are consistent with low-lying MLCT excited states, which are typical of Ru(II) complexes. Femtosecond transient absorption measurements show that that the (3)MLCT excited state of the heteroleptic complex [Ru(tpy)(pydppz)](2+) (tau approximately 5 ns) is longer-lived than that of the homoleptic complex [Ru(pydppz)(2)](2+) (tau = 2.4 ns) and that these lifetimes are significantly longer than that of the (3)MLCT state of the parent complex [Ru(tpy)(2)](2+) (tau = 120 ps). These differences are explained by the lower-energy (3)MLCT excited state present in [Ru(tpy)(pydppz)](2+) and [Ru(pydppz)(2)](2+) compared to [Ru(tpy)(2)](2+), resulting in less deactivation of the former through the ligand-field state(s). DFT and TDDFT calculations are consistent with this explanation. [Ru(tpy)(pydppz)](2+) and [Ru(pydppz)(2)](2+) bind to DNA through the intercalation of the pydppz ligand; however, only the heteroleptic complex exhibits luminescence enhancement in the presence of DNA. The difference in the photophysical behavior of the complexes is explained by the inability of [Ru(pydppz)(2)](2+) to intercalate both pydppz ligands, such that one pydppz always remains exposed to the solvent. DNA photocleavage is observed for [Ru(tpy)(pydppz)](2+) in air, but not for [Ru(pydppz)(2)](2+). The DNA damage likely proceeds through the production of small amounts of (1)O(2) by the longer-lived complex. Although both complexes possess the intercalating pydppz ligand, they exhibit different photophysical properties in the presence of DNA.     

Synthesis of the DNA-[Ru(tpy)(dppz)(CH(3)CN)](2+) conjugates and their photo cross-linking studies with the complementary DNA strand

We here report our studies on the conjugation of photoreactive Ru(2+) complex to oligonucleotides (ODNs), which give a stable duplex with the complementary target DNA strand. These functionalized DNA duplexes bearing photoreactive Ru(2+) complex can be specifically photolyzed to give the reactive aqua derivative, [Ru(tpy)(dppz)(H(2)O)](2+)-ODN (tpy = 2,2':6',2' '-terpyridine; dppz = dipyrido[3,2-a:2',3'-c]phenazine), in situ, which successfully cross-links to give photoproduct(s) in the duplex form with the target complementary DNA strand. Thus, the stable precursor of the aquaruthenium complex, the monofunctional polypyridyl ruthenium complex [Ru(tpy)(dppz)(CH(3)CN)](2+), has been site-specifically tethered to ODN, for the first time, by both solid-phase synthesis and postsynthetic modifications. (i) In the first approach, pure 3'-[Ru(tpy)(dppz)(CH(3)CN)](2+)-ODN conjugate has been obtained in 42% overall yield (from the monomer blocks) by the automated solid-phase synthesis on a support labeled with [Ru(tpy)(dppz)Cl](+) complex with subsequent liberation of the crude conjugate from the support under mild conditions and displacement of the Cl(-) ligand by acetonitrile in the coordination sphere of the Ru(2+) label. (ii) In the second approach, the single-modified (3'- or 5'- or middle-modified) or 3',5'-bis-modified Ru(2+)-ODN conjugates were prepared in 28-50% yield by an amide bond formation between an active ester of the metal complex and the ODNs conjugated with an amino linker. The pure conjugates were characterized unambiguously by ultraviolet-visible (UV-vis) absorption spectroscopy, enzymatic digestion followed by HPLC quantitation, polyacrylamide gel electrophoresis (PAGE), and mass spectrometry (MALDI-TOF as well as by ESI). [Ru(tpy)(dppz)(CH(3)CN)](2+)-ODNs form highly stabilized ODN.DNA duplexes compared to the unlabeled counterpart (DeltaT(m) varies from 8.4 to 23.6 degrees C) as a result of intercalation of the dppz moiety; they undergo clean and selective photodissociation of the CH(3)CN ligand to give the corresponding aqua complex, [Ru(tpy)(dppz)(H(2)O)](2+)-ODNs (in the aqueous medium), which is evidenced from the change of their UV-vis absorption properties and the detection of the naked Ru(2+)-ODN ions generated in the course of the matrix-assisted laser desorption ionization time-of-flight (MALDI-TOF) mass spectrometric analysis. Thus, when [Ru(tpy)(dppz)(CH(3)CN)](2+)-ODN conjugate was hybridized to the complementary guanine (G)-rich target strand (T), and photolyzed in a buffer (pH 6.8), the corresponding aqua complex formed in situ immediately reacted with the G residue of the opposite strand, giving the cross-linked product. The highest yield (34%) of the photo cross-linked product obtained was with the ODN carrying two reactive Ru(2+) centers at both 3'- and 5'-ends. For ODNs carrying only one Ru(2+) complex, the yield of the cross-linked adduct in the corresponding duplex is found to decrease in the following order: 3'-Ru(2+)-ODN (22%) > 5'-Ru(2+)-ODN (9%) > middle-Ru(2+)-ODN (7%). It was also found that the photo cross-coupling efficiency of the tethered Ru(2+) complex with the target T strand decreased as the stabilization of the resulting duplex increased: 3'-Ru(2+)-ODN (VI.T) (DeltaT(m)(b) = 7 degrees C) < 5'-Ru(2+)-ODN (V.T) (DeltaT(m)(b) = 16 degrees C) < middle-Ru(2+)-ODN (VII.T) (DeltaT(m)(b) = 24.3 degrees C, Table 2). This shows that, with the rigidly packed structure, as in the duplex with middle-Ru(2+)-ODN, the metal center flexibility is considerably reduced, and consequently the accessibility of target G residue by the aquaruthunium moiety becomes severely restricted, which results in a poor yield in the cross-coupling reaction. The cross-linked product was characterized by PAGE, followed by MALDI-TOF MS.     

Direct intercalation of bis-2,2',2″,6-terpyridylcobalt(III) into zirconium phosphate layers for biosensing applications

The direct intercalation reaction of [Co(tpy)(2)](2+) with the highly hydrated θ phase of layered zirconium phosphate (θ-ZrP) resulted in the formation of the oxidized [Co(tpy)(2)](3+) ion within the ZrP material. The X-ray powder diffraction patterns showed that the interlayer distance increases from 10.3 ? in θ-ZrP to 14.9 ? in the dry [Co(tpy)(2)](3+)-intercalated ZrP {[Co(tpy)(2)](3+):ZrP} phase. The complex remains electroactive within the layers of ZrP. The formal potential of a carbon paste electrode (CPE) modified with [Co(tpy)(2)](3+):ZrP (E°' = 40.8 mV versus Ag/AgCl, 3.5 M NaCl) is non-pH-dependent. However, the sensitivity of the [Co(tpy)(2)](3+):ZrP-modified CPE for the detection of reduced nicotinamide adenine dinucleotide (NADH) electrooxidation was lower than that of a previously reported CPE modified with [Ru(phend)(2)bpy](2+)-intercalated ZrP. (1) To improve the characteristics of NADH electrooxidation of the [Co(tpy)(2)](3+):ZrP-modified CPE, we included the enzyme diaphorase in solution, which increased the electrocatalytic current for NADH oxidation. A bienzymatic lactate biosensor was constructed and used for lactate sensing.     

A platinum-ruthenium dinuclear complex bridged by bis(terpyridyl)xanthene

4,5-Bis(terpyridyl)-2,7-di-tert-butyl-9,9-dimethylxanthene (btpyxa) was prepared to serve as a new bridging ligand via Suzuki coupling of terpyridin-4'-yl triflate and 2,7-di-tert-butyl-9,9-dimethylxanthene-4,5-diboronic acid. The reaction of btpyxa with either 1 equiv or an excess of PtCl(2)(cod) (cod = 1,5-cyclooctadiene) followed by anion exchange afforded mono- and dinuclear platinum complexes [(PtCl)(btpyxa)](PF(6)) ([1](PF(6))) and [(PtCl)(2)(btpyxa)](PF(6))(2) ([2](PF(6))(2)), respectively. The X-ray crystallography of [1](PF(6)).CHCl(3) revealed that the two terpyridine units in the ligand are nearly parallel to each other. The heterodinuclear complex [(PtCl)[Ru((t)Bu(2)SQ)(dmso)](btpyxa)](PF(6))(2) ([4](PF(6))(2)) (dmso = dimethyl sulfoxide; (t)Bu(2)SQ = 3,5-di-tert-butyl-1,2-benzosemiquinone) and the monoruthenium complex [Ru((t)Bu(2)SQ)(dmso)(trpy)](PF(6)) ([5](PF(6))) (trpy = 2,2':6',2' '-terpyridine) were also synthesized. The CV of [2](2+) suggests possible electronic interaction between the two Pt(trpy) groups, whereas such an electronic interaction was not suggested by the CV of [4](2+) between Pt(trpy) and Ru((t)Bu(2)SQ) frameworks.     

Photodriven electron and energy transfer from a light-harvesting metallodendrimer

Intermolecular electron and energy transfer from a light-harvesting metallodendrimer [Ru[bpy(C-450)(4)](3)](2+), where bpy(C-450)(4) is a 2,2'-bipyridine derivative containing 4 coumarin-450 units connected together through aryl ether linkages, is observed in acetonitrile solutions at room temperature. The model complex [Ru(dmb)(3)](2+), where dmb is 4,4'-dimethyl-2,2'-bipyridine, is included for quantitative comparison. The excited states of both compounds are metal-to-ligand charge transfer in nature and participate in excited-state electron and triplet energy transfer processes. Quenching constants were determined from luminescence and time-resolved absorption experiments at constant ionic strength. [Ru[bpy(C-450)(4)](3)](2+) displays significantly slower quenching rates to molecular oxygen and methyl viologen relative to the other processes investigated. Triplet energy transfer from [Ru[bpy(C-450)(4)](3)](2+) to 9-methylanthracene is quantitatively indistinguishable from [Ru(dmb)(3)](2+) while reductive electron transfer from phenothiazine was slightly faster in the former. With the exception of dioxygen quenching, our results indicate that the current dendritic structure is ineffective in shielding the core from bimolecular electron and triplet energy transfer reactions. Electrochemical measurements of [Ru[bpy(C-450)(4)](3)](2+) reveal irreversible oxidative processes at potentials slightly negative to the Ru(III/II) potential that are assigned to oxidations in the dendritic structure. Excited-state oxidative electron-transfer reactions facilitate this process resulting in the reduction of ground-state Ru(III) to Ru(II) and the trapping of the methyl viologen radical cation (MV(*+)) when methyl viologen serves as the quencher. This process generates a minimum of 9 MV(*+)'s for every [Ru[bpy(C-450)(4)](3)](2+) molecule and disassembles the metallodendrimer, resulting in the production of a [Ru(dmb)(3)](2+)-like species and "free" C-450-like dyes.     

Reactivity of an adsorbed Ru(VI)-oxo complex: oxidation of benzyl alcohol

The phosphonated ruthenium complex, [Ru(tpy-PO(3)H(2))(OH(2))(3)](2+) (1) (tpy-PO(3)H(2) = 4'-phosphonato-2,2':6',2' '-terpyridine), was synthesized and attached to glass|ITO or glass|ITO|TiO(2) electrodes. After attachment to the metal oxide surface through the phosphonate linkage, 1 can be oxidized (either chemically or electrochemically) to the reactive Ru(VI)-dioxo complex, glass|ITO|[((HO)(2)OP)tpy)RuVI(O)(2)(OH(2))](2+), which remains attached to the surface. The attached Ru(VI) complex reacts with benzyl alcohol through mechanisms similar to those proposed for the solution analog. More specifically, Ru(VI) is reduced in a stepwise fashion to Ru(IV) and then finally to Ru(II). The reduction of Ru(VI) is accompanied by a rate-limiting insertion to the C-H bond of benzyl alcohol, followed by solvolysis of the aldehyde hydrate. In addition, the surface-bound Ru(VI) acts as an electrooxidation catalyst which carries out approximately 130 (2e(-)) turnovers before deactivation.     

Charge delocalization of 1,4-benzenedicyclometalated ruthenium: a comparison between tris-bidentate and bis-tridentate complexes

A dimetallic biscyclometalated ruthenium complex, [(bpy)(2)Ru(dpb)Ru(bpy)(2)](2+) (bpy = 2,2'-bipyridine; dpb = 1,4-di-2-pyridylbenzene), with a tris-bidentate coordination mode has been prepared. The electronic properties of this complex were studied by electrochemical and spectroscopic analysis and DFT/TDDFT calculations on both rac and meso isomers. Complex [(bpy)(2)Ru(dpb)Ru(bpy)(2)](2+) has a similar 1,4-benzenedicyclometalated ruthenium (Ru-phenyl-Ru) structural component with a previously reported bis-tridentate complex, [(tpy)Ru(tpb)Ru(tpy)](2+) (tpy = 2,2';6',2″-terpyridine; tpb = 1,2,4,5-tetra-2-pyridylbenzene). The charge delocalizations of these complexes across the Ru-phenyl-Ru array were investigated and compared by studying the corresponding one-electron-oxidized species, generated by chemical oxidation or electrochemical electrolysis, with DFT/TDDFT calculations and spectroscopic and EPR analysis. These studies indicate that both [(bpy)(2)Ru(dpb)Ru(bpy)(2)](3+) and [(tpy)Ru(tpb)Ru(tpy)](3+) are fully delocalized systems. However, the coordination mode of the metal component plays an important role in influencing their electronic properties.     

Preparation and multicolor electrochromic performance of a WO3/tris(2,2'-bipyridine)ruthenium(II)/polymer hybrid film

A tungsten trioxide (WO(3))/tris(2,2'-bipyridine)ruthenium(II) ([Ru(bpy)(3)](2+); bpy=2,2'-bipyridine)/poly(sodium 4-styrenesulfonate) (PSS) hybrid film was prepared by electrodeposition from a colloidal triad solution containing peroxotungstic acid (PTA), [Ru(bpy)(3)](2+), and PSS. A binary solution of [Ru(bpy)(3)](2+) and PTA (30 vol % ethanol in water) gradually gave an orange precipitate, possibly caused by the electrostatic interaction between the cationic [Ru(bpy)(3)](2+) and the anionic PTA. The addition of PSS to the binary PTA/[Ru(bpy)(3)](2+) solution remarkably suppressed this precipitation and caused a stable, colloidal triad solution to form. The spectrophotometric measurements and lifetime analyses of the photoluminescence from the excited [Ru(bpy)(3)](2+) ion in the colloidal triad solution suggested that the [Ru(bpy)(3)](2+) ion is partially shielded from electrostatic interaction with anionic PTA by the anionic PSS polymer chain. The formation of the colloidal triad made the ternary [Ru(bpy)(3)](2+)/PTA/PSS solution much more redox active. Consequently, the rate of electrodeposition of WO(3) from PTA increased appreciably by the formation of the colloidal triad, and fast electrodeposition is required for the unique preparation of this hybrid film. The absorption spectrum of the [Ru(bpy)(3)](2+) ion in the film was close to its spectrum in water, but the photoexcited state of the [Ru(bpy)(3)](2+) ion was found to be quenched completely by the presence of WO(3) in the hybrid film. The cyclic voltammogram (CV) of the hybrid film suggested that the [Ru(bpy)(3)](2+) ion performs as it is adsorbed onto WO(3) during the electrochemical oxidation. An ohmic contact between the [Ru(bpy)(3)](2+) ion and the WO(3) surface could allow the electrochemical reaction of adsorbed [Ru(bpy)(3)](2+). The composition of the hybrid film, analyzed by electron probe microanalysis (EPMA), suggested that the positive charge of the [Ru(bpy)(3)](2+) ion could be neutralized by partially reduced WO(3)(-) ions, in addition to Cl(-) and PSS units, based on the charge balance in the film. The electrostatic interaction between the WO(3)(-) ion and the [Ru(bpy)(3)](2+) ion might be responsible for forming the electron transfer channel that causes the complete quenching of the photoexcited [Ru(bpy)(3)](2+) ion, as well as the formation of the ohmic contact between the [Ru(bpy)(3)](2+) ion and WO(3). A multicolor electrochromic performance of the WO(3)/[Ru(bpy)(3)](2+)/PSS hybrid film was observed, in which transmittances at 459 and 800 nm could be changed, either individually or at once, by the selection of a potential switch. Fast responses, of within a few seconds, to these potential switches were exhibited by the electrochromic hybrid film.     

Electrochromic hysteresis performance of a prussian blue film arising from electron-transfer control by a tris(2,2'-bipyridine)ruthenium(II)-doped WO(3) film as studied by a spectrocyclic voltammetry technique

A [Ru(bpy)(3)](2+) (bpy=2,2'-bipyridine)-doped WO(3) film was prepared as a base layer on a substrate by cathodic electrodeposition from a colloidal triad solution containing peroxotungstic acid (PTA), [Ru(bpy)(3)](2+), and poly(sodium 4-styrenesulfonate) (PSS). A Prussian blue (PB; Fe(II)-Fe(III)) film was cathodically electrodeposited on the [Ru(bpy)(3)](2+)-doped WO(3) film or neat WO(3) film from an aqueous Berlin brown (BB; Fe(III)-Fe(III)) colloid solution to yield a [Ru(bpy)(3)](2+)-doped WO(3)/PB bilayer film or WO(3)/PB bilayer film. For the spectrocyclic voltammogram (SCV) of the WO(3)/PB film, a redox response of Prussian white (PW; Fe(II)-Fe(II))/PB was observed at 0.11 V, however, further oxidation of PB to BB was not allowed by the interfacial n-type Schottky barrier between the WO(3) and PB layers. For the [Ru(bpy)(3)](2+)-doped WO(3)/PB film, any electrochemical response assigned to the redox of PB was not observed in the cyclic voltammogram, however, the in situ absorption spectral change recorded simultaneously showed the significant redox reactions based on PB. The SCV revealed that PW on the [Ru(bpy)(3)](2+)-doped WO(3) film is completely oxidized to PB by a geared reaction of Ru(II)/Ru(III) at 1.05 V, and that 32 % of PB formed is further oxidized to BB by the same geared reaction in the potential scan to 1.5 V. PB was completely re-reduced to PW by a geared reaction of H(x)WO(3)/WO(3) at -0.5 V in the reductive potential scan. These geared electrochemical reactions produced an electrochromic hysteresis performance of the PB film layered on the [Ru(bpy)(3)](2+)-doped WO(3) film.     

Preparation of a [Ru(bpy)2(dppz)]2+-intercalated DNA cast film using a self-standing method and its luminescence tuning by Cu2+ ions and EDTA

In this correspondence, we report on the first preparation of [Ru(bpy)(2)(dppz)](2+)-intercalated (bpy = 2,2'-bipyridine; dppz = dipyrido[3,2-a:2',3'-c]phenazine) DNA films on an indium-tin oxide surface via a solution-based self-standing strategy, carried out by the direct mixing of aqueous solutions of both anionic DNA and cationic metallointercalator at a molar ratio of 5:6. The luminescence of a [Ru(bpy)(2)(dppz)](2+)-intercalated DNA cast film is studied and found to show excellent tunable characteristics by Cu(2+) ions and ethylenediaminetetraacetic acid addition.     

Photocatalytic generation of a non-heme oxoiron(IV) complex with water as an oxygen source

The photocatalytic formation of a non-heme oxoiron(IV) complex, [(N4Py)Fe(IV)(O)](2+) [N4Py = N,N-bis(2-pyridylmethyl)-N-bis(2-pyridyl)methylamine], efficiently proceeds via electron transfer from the excited state of a ruthenium complex, [Ru(II)(bpy)(3)](2+)* (bpy = 2,2'-bipyridine) to [Co(III)(NH(3))(5)Cl](2+) and stepwise electron-transfer oxidation of [(N4Py)Fe(II)](2+) with 2 equiv of [Ru(III)(bpy)(3)](3+) and H(2)O as an oxygen source. The oxoiron(IV) complex was independently generated by both chemical oxidation of [(N4Py)Fe(II)](2+) with [Ru(III)(bpy)(3)](3+) and electrochemical oxidation of [(N4Py)Fe(II)](2+).     

Trinuclear ruthenium dendrons based on bridging PHEHAT and TPAC ligands

Novel polynuclear compounds, the trinuclear precursor complex cis-{[(phen)(2)Ru(PHEHAT)](2)Ru(CH(3)CN)(2)}(6+) 4 and the trinuclear TPAC (tetrapyrido[3,2-a:2',3'-c:3',2'-h:2',3'-j]acridine) complex {[(phen)(2)Ru(PHEHAT)](2)Ru(TPAC)}(6+) 5 have been prepared. Their electrochemistry and photophysics indicate that the (3)MLCT (metal to ligand charge transfer) emissions involve the external {Ru(PHEHAT)} moieties for both complexes and there is no spectro-electrochemical correlation. The trinuclear dendron with the TPAC ligand represents a key compound for future constructions of much larger species thanks to the TPAC that could bridge another polynuclear precursor. For decreasing the length of preparation of these compounds, microwave assisted syntheses have been tested and used not only for the targeted complexes but also for the precursors ((phen)(2)RuCl(2), {(phen)(2)Ru(phendione)}(2+), {(phen)(2)Ru(PHEHAT)}(2+) (PHEHAT = 1,10-phenanthrolino[5,6-b]1,4,5,8,9,12-hexaazatriphenylene), (DMSO)(4)RuCl(2)), and for the bridging TPAC ligand itself. The microwave method allows a drastic decrease of the preparation times, especially in the case of the TPAC, from 8 days to 60 min.     

Catalytic four-electron oxidation of water by intramolecular coupling of the oxo ligands of a bis(ruthenium-bipyridine) complex

A bis(ruthenium-bipyridine) complex bridged by 1,8-bis(2,2':6',2'-terpyrid-4'-yl)anthracene (btpyan), [Ru(2)(μ-Cl)(bpy)(2)(btpyan)](BF(4))(3) ([1](BF(4))(3); bpy = 2,2'-bipyridine), was prepared. The cyclic voltammogram of [1](BF(4))(3) in water at pH?1.0 displayed two reversible [Ru(II),Ru(II)](3+)/[Ru(II),Ru(III)](4+) and [Ru(II),Ru(III)](4+)/[Ru(III),Ru(III)](5+) redox couples at E(1/2)(1) = +0.61 and E(1/2)(2) = +0.80?V (vs. Ag/AgCl), respectively, and an irreversible anodic peak at around E = +1.2?V followed by a strong anodic currents as a result of the oxidation of water. The controlled potential electrolysis of [1](3+) ions at E = +1.60?V in water at pH?2.6 (buffered with H(3)PO(4)/NaH(2)PO(4)) catalytically evolved dioxygen. Immediately after the electrolysis of the [1](3+) ion in H(2)(16)O at E = +1.40?V, the resultant solution displayed two resonance Raman bands at nu = 442 and 824?cm(-1). These bands shifted to nu = 426 and 780?cm(-1), respectively, when the same electrolysis was conducted in H(2)(18)O. The chemical oxidation of the [1](3+) ion by using a Ce(IV) species in H(2)(16)O and H(2)(18)O also exhibited the same resonance Raman spectra. The observed isotope frequency shifts (Δnu = 16 and 44?cm(-1)) fully fit the calculated ones based on the Ru-O and O-O stretching modes, respectively. The first successful identification of the metal-O-O-metal stretching band in the oxidation of water indicates that the oxygen-oxygen bond at the stage prior to the evolution of O(2) is formed through the intramolecular coupling of two Ru-oxo groups derived from the [1](3+) ion.     

Linear-type S-bridged triruthenium complexes with aliphatic aminothiolate ligands: synthesis, characterization, and properties

Treatment of [RuCl(2)(DMSO)(4)] with 2-aminoethanethiol (Haet) in ethanol gave a dicationic triruthenium complex, [Ru[Ru(aet)(3)](2)]Cl(2) ([1]Cl(2)). Complex [1]Cl(2) was also obtained by treatment of RuCl(3).nH(2)O with excess Haet in water. When [1](2+) was chromatographed on a cation-exchange column of SP-Sephadex C-25, meso (DeltaLambda) and racemic (DeltaDelta/LambdaLambda) isomers of the corresponding tricationic complex, [Ru[Ru(aet)(3)](2)](3+) ([2](3+)), were eluted with aqueous NaNO(3). The racemic isomer of [2](3+) was optically resolved into DeltaDelta and LambdaLambda isomers by using [Sb(2)(R,R-tartrato)(2)](2-) as a resolving agent. The molecular structures of DeltaLambda- and DeltaDelta/LambdaLambda-[2](NO(3))(3) were determined by X-ray crystallography. In these complexes, the central Ru atom is coordinated by six thiolato groups from two terminal fac-(S)-[Ru(aet)(3)] units in an octahedral geometry, forming a linear-type S-bridged triruthenium structure. The spectroelectrochemical studies on the electronic absorption and CD spectra, together with the electrochemical studies, demonstrated that [1](2+) and [2](3+) are interconvertible with each other through a one-electron redox process, retaining the chirality of the triruthenium structure. Their electronic structures were investigated on the basis of EPR and magnetic susceptibility measurements, which indicated that [1](2+) and [2](3+) have spin ground states of S(t) = 0 and S(t) = 1/2, respectively. The corresponding L-cysteinato complex, [Ru[Ru(L-cys-N,S)(3)](2)](3-), which was formed from RuCl(3).nH(2)O and excess L-cysteine (L-H(2)cys) in water followed by air oxidation, is also presented.     

Electrochemiluminescent peptide nucleic acid-like monomers containing Ru(II)-dipyridoquinoxaline and Ru(II)-dipyridophenazine complexes

A series of Ru(II)-peptide nucleic acid (PNA)-like monomers, [Ru(bpy)(2)(dpq-L-PNA-OH)](2+) (M1), [Ru(phen)(2)(dpq-L-PNA-OH)](2+) (M2), [Ru(bpy)(2)(dppz-L-PNA-OH)](2+) (M3), and [Ru(phen)(2)(dppz-L-PNA-OH)](2+) (M4) (bpy = 2,2'-bipyridine, phen = 1,10-phenanthroline, dpq-L-PNA-OH = 2-(N-(2-(((9H-fluoren-9-yl)methoxy)carbonylamino)ethyl)-6-(dipyrido[3,2-a:2',3'-c]phenazine-11-carboxamido)hexanamido)acetic acid, dppz-L-PNA-OH = 2-(N-(2-(((9H-fluoren-9-yl) methoxy)carbonylamino)ethyl)-6-(dipyrido[3,2-f:2',3'-h]quinoxaline-2-carboxamido)acetic acid) have been synthesized and characterized by IR and (1)H NMR spectroscopy, mass spectrometry, and elemental analysis. As is typical for Ru(II)-tris(diimine) complexes, acetonitrile solutions of these complexes (M1-M4) show MLCT transitions in the 443-455 nm region and emission maxima at 618, 613, 658, and 660 nm, respectively, upon photoexcitation at 450 nm. Changes in the ligand environment around the Ru(II) center are reflected in the luminescence and electrochemical response obtained from these monomers. The emission intensity and quantum yield for M1 and M2 were found to be higher than for M3 and M4. Electrochemical studies in acetonitrile show the Ru(II)-PNA monomers to undergo a one-electron redox process associated with Ru(II) to Ru(III) oxidation. A positive shift was observed in the reversible redox potentials for M1-M4 (962, 951, 936, and 938 mV, respectively, vs Fc(0/+) (Fc = ferrocene)) in comparison with [Ru(bpy)(3)](2+) (888 mV vs Fc(0/+)). The ability of the Ru(II)-PNA monomers to generate electrochemiluminescence (ECL) was assessed in acetonitrile solutions containing tripropylamine (TPA) as a coreactant. Intense ECL signals were observed with emission maxima for M1-M4 at 622, 616, 673, and 675 nm, respectively. At an applied potential sufficiently positive to oxidize the ruthenium center, the integrated intensity for ECL from the PNA monomers was found to vary in the order M1 (62%) > M3 (60%) > M4 (46%) > M2 (44%) with respect to [Ru(bpy)(3)](2+) (100%). These findings indicate that such Ru(II)-PNA bioconjugates could be investigated as multimodal labels for biosensing applications.     

cis-[Ru(2,2':6',2' '-terpyridine)(DMSO)Cl(2)]: useful precursor for the synthesis of heteroleptic terpyridine complexes under mild conditions

[Ru(II)(terpy)(DMSO)Cl(2)] complexes were synthesized as a 5/1 mixture of cis and trans isomers, and their reactivities with CO and with substituted 2,2':6',2' '-terpyridine (terpy) moieties have been investigated. The structure of a trans isomer and its CO adduct have been unambiguously assigned by spectroscopy and X-ray diffraction. The [Ru(terpy)(terpy-Br)](2+) complex prepared either from the cis-[Ru(II)(terpy)(DMSO)Cl(2)] or from the cis-[Ru(II)(terpy-Br)(DMSO)Cl(2)] precursor appeared to be reactive in cross-coupling reactions promoted by low-valent palladium(0) and is an attractive target for the stepwise synthesis of polynuclear complexes bearing vacant coordination sites (terpy-Br for 4'-bromo-2,2':6',2' '-terpyridine). Several bipyridine, phenanthroline, and bipyrimidine complexes were prepared this way and their optical and redox properties determined and discussed.     

Surface control of oxidation by an adsorbed Ru(IV)-oxo complex.

When adsorbed to optically transparent, thin films of TiO(2) nanoparticles on glass, the aqua complex [Ru(II)(tpy)(bpy(PO(3)H(2))(2))(OH(2))](2+) (bpy(PO(3)H(2))(2) is 2,2'-bipyridyl-4,4'-diphosphonic acid; tpy is 2,2':6',2' '-terpyridine) is oxidized by Ce(IV)(NH(4))(2)(NO(3))(6) in 0.1 M HClO(4) to its Ru(IV)=O(2+) form as shown by UV-visible measurements and analysis of oxidative equivalents by oxidation of hydroquinone to quinone. Kinetic studies on the oxidations of cyclohexene, benzyl alcohol, phenol, and trans-stilbene by surface-bound Ru(IV)=O(2+) by UV-visible monitoring reveal direct evidence for initial 2-electron steps to give Ru(II) intermediates in all four cases. These steps are masked in solution where Ru(IV) --> Ru(II) reduction is followed by rapid reactions between Ru(II) intermediates and Ru(IV)=O(2+) to give Ru(III). Reactions between Ru(II) and Ru(IV)=O(2+) on the surface are inhibited by binding to the surface, which restricts translational mobility. Rate constants on the surface and in solution are comparable, pointing to comparable reactivities. The surface experiments give unprecedented insight into oxidation mechanism with important implications for achieving product selectivity in synthesis by limiting oxidation to two electrons.     

Chemical interactions in the surface-enhanced resonance Raman scattering of ruthenium polypyridyl complexes

Surface-enhanced resonance Raman scattering (SERRS) from the alpha-diimine complexes [Ru(bpm)(3)](2+) and [Ru(bpz)(3)](2+) is reported for the first time at a roughened silver electrode. In both cases, a possible adsorbate orientation has been proposed involving binding through nitrogen lone pair electrons to the silver surface, based on changes in band positions upon adsorption. The SERRS spectra of [Ru(bpm)(3)](2+) were found to change slightly with a change in applied potential. The relative intensity of the nu(C6C6') band was found to be dependent on both excitation wavelength and applied potential. This was ascribed to an active charge transfer (CT) mechanism operating synergistically with the electromagnetic mechanism. No such CT activity was observed in [Ru(bpz)(3)](2+). It is tentatively suggested that this behavior may arise from the different modes of adsorption of the two complexes.     

Photoinduced ligand transformations in a ruthenium complex of dimethoxytetrapyridotetraazapentacene

The dinuclear ruthenium(II) complex [(phen)(2)Ru(tatpOMe)Ru(phen)(2)](4+) (2(4+); phen is 1,10-phenanthroline and tatpOMe is 10,21-dimethoxy-9,10,20,33-tetraazatetrapyrido[3,2-a:2'3'-c:3',2'-l:2',3'-n]pentacene) has been synthesized and characterized by (1)H NMR, ESI mass spectroscopy and elemental analysis. Loss of methoxy group from bridging ligand of complex 2(4+) due to irradiation is observed by (1)H NMR and photochemistry. The interrelated electronic properties UV-Vis, electrochemistry, photochemistry and molecular orbital calculation are analyzed and discussed on the bridging ligand of the complex 2(4+).     

Surface confinement and its effects on the luminescence quenching of a ruthenium-containing metallopolymer

Luminescence quenching of the metallopolymers [Ru(bpy)(2)(PVP)(10)](2+) and [Ru(bpy)(2)(PVP)(10)Os(bpy)(2)](4+), both in solution and as thin films, is reported, where bpy is 2,2'-bipyridyl and PVP is poly(4-vinylpyridine). When the metallopolymer is dissolved in ethanol, quenching of the ruthenium excited state, Ru(2+*), within [Ru(bpy)(2)(PVP)(10)](2+) by [Os(bpy)(3)](2+) proceeds by a dynamic quenching mechanism and the rate constant is (1.1 +/- 0.1) x 10(11) M(-1) s(-1). This quenching rate is nearly two orders of magnitude larger than that found for quenching of monomeric [Ru(bpy)(3)](2+) under the same conditions. This observation is interpreted in terms of an energy transfer quenching mechanism in which the high local concentration of ruthenium luminophores leads to a single [Os(bpy)(3)](2+) centre quenching the emission of several ruthenium luminophores. Amplifications of this kind will lead to the development of more sensitive sensors based on emission quenching. Quenching by both [Os(bpy)(3)](2+) and molecular oxygen is significantly reduced within a thin film of the metallopolymer. Significantly, in both optically driven emission and electrogenerated chemiluminescence, emission is observed from both ruthenium and osmium centres within [Ru(bpy)(2)(PVP)(10)Os(bpy)(2)](4+) films, i.e. the ruthenium emission is not quenched by the coordinated [Os(bpy)(2)](2+) units. This observation opens up new possibilities in multi-analyte sensing since each luminophore can be used to detect separate analytes, e.g. guanine and oxoguanine.