Unique role of hydrophilic ionic liquid in modifying properties of aqueous Triton X-100

Modification of important physicochemical properties of aqueous surfactant solutions can be achieved by addition of environmentally benign room temperature ionic liquids (ILs). While low aqueous solubility of "hydrophobic" ILs limits the amount of IL that may be added to achieve desired changes in the physicochemical properties, hydrophilic ILs do not have such restrictions associated to them. Alterations in the key physicochemical properties of aqueous solutions of a common nonionic surfactant Triton X-100 (TX100) on addition of up to 30 wt % hydrophilic IL 1-butyl-3-methylimidazolium tetrafluoroborate ([bmim][BF4]) are reported. The presence of micellar aggregates in as high as 30 wt % [bmim][BF4]-added aqueous TX100 solutions is established by dynamic light scattering and fluorescence probe behavior. Increasing the concentration of [bmim][BF4] results in decrease in average micellar size and aggregation number and increase in critical micelle concentration, indicating an overall unfavorable aggregation process. Increase in the dipolarity and the microfluidity of the probe cybotactic region within the palisade layer of the micellar phase upon [bmim][BF4] addition implies increased water penetration and the possibility of TX100-[bmim][BF4] interactions. While the changes in some of the physicochemical properties indicate the role of [bmim][BF4] to be similar to a cosurfactant, the IL acts like a cosolvent as far as changes in other properties are concerned. Effectiveness of IL [bmim][BF4] in modifying physicochemical properties of aqueous TX100 is demonstrated.     

Concentration-dependent dual behavior of hydrophilic ionic liquid in changing properties of aqueous sodium dodecyl sulfate

Modifying physicochemical properties of aqueous surfactant solutions in favorable fashion by addition of environmentally benign room-temperature ionic liquids (ILs) has enormous future potential. Due to its unusual properties, an IL may demonstrate a unique role in altering the properties of aqueous surfactant solutions. Changes in the properties of aqueous sodium dodecyl sulfate (SDS), an anionic surfactant, upon addition of a common and popular "hydrophilic" ionic liquid 1-butyl-3-methylimidazolium tetrafluoroborate [bmim][BF4] are presented. Addition of low concentrations of [bmim][BF4] (i.e., 相似文献   

Ionic liquid induced changes in the properties of aqueous zwitterionic surfactant solution

Modifying properties of aqueous surfactant solutions by addition of external additives is an important area of research. Unusual properties of ionic liquids (ILs) make them ideal candidates for this purpose. Changes in important physicochemical properties of aqueous zwitterionic N-dodecyl- N, N-dimethyl-3-ammonio-1-propanesulfonate (SB-12) surfactant solution upon addition of hydrophilic IL 1-butyl-3-methylimidazolium tetrafluoroborate, [bmim][BF 4], are reported. Dynamic light scattering results indicate a dramatic reduction in the average micellar size in the presence of [bmim][BF 4]; micellar (or micelle-like) aggregation in the presence of as high as 30 wt % [bmim][BF 4] is confirmed. Responses from fluorescence probes are used to obtain critical micelle concentration (cmc), aggregation number ( N agg), and dipolarity and microfluidity of the micellar pseudophase of aqueous SB-12 in the presence of [bmim][BF 4]. In general, increasing the amount of [bmim][BF 4] to 30 wt % results in decrease in N agg and increase in cmc. Increase in the dipolarity and the microfluidity of the probe cybotactic region within the micellar pseudophase is observed on increasing [bmim][BF 4] concentration in the solution. It is attributed to increased water penetration into the micellar pseudophase as [bmim][BF 4] is added to aqueous SB-12. It is proposed that IL [bmim][BF 4] behaves similar to an electrolyte and/or a cosurfactant when present at low concentrations and as a polar cosolvent when present at high concentrations. Electrostatic attraction between cation of IL and anion of zwitterion, and anion of IL and cation of zwitterion at low concentrations of [bmim][BF 4] is evoked to explain the observed changes. Presence of IL as cosolvent appears to reduce the efficiency of micellization process by reducing the hydrophobic effect.     

Role of the Surfactant Structure in the Behavior of Hydrophobic Ionic Liquids within Aqueous Micellar Solutions

The behavior of an ionic liquid (IL) within aqueous micellar solutions is governed by its unique property to act as both an electrolyte and a cosolvent. The influence of the surfactant structure on the properties of aqueous micellar solutions of zwitterionic SB‐12, nonionic Brij‐35 and TX‐100, and anionic sodium dodecyl sulfate (SDS) in the presence of the “hydrophobic” IL 1‐butyl‐3‐methylimidazolium hexafluorophosphate ([bmim][PF₆]) is assessed along with the possibility of forming oil‐in‐water microemulsions in which the IL acts as the “oil” phase. The solubility of [bmim][PF₆] within aqueous micellar solutions increases with increasing surfactant concentration. In contrast to anionic SDS, the zwitterionic and nonionic surfactant solutions solubilize more [bmim][PF₆] at higher concentrations and the average aggregate size remains almost unchanged. The formation of IL‐in‐water microemulsions when the concentration of [bmim][PF₆] is above its aqueous solubility is suggested for nonionic Brij‐35 and TX‐100 aqueous surfactant solutions.     

Study of Imidazolium Ionic Liquids:Temperature-dependent Fluorescence and Molecular Dynamics Simulation

The steady-state fluorescence spectra and molecular dynamics simulations were explored to investigate the temperature dependent organization in some imidazolium ionic liquids:1-butyl-3-methylimidazolium hexafluo-rophosphate([bmim][PF6]),1-ethyl-3-methylimidazolium ethylsulfate([emim][EtSO4]) and 1-butyl-3-methylimida-zolium tetrafluoroborate([bmim][BF4]).The pure room temperature ionic liquids(ILs) exhibit a large red shift at more than an excitation wavelength of around 340 nm,which demonstrates the hetero...     

Effect of water and organic solvents on the ionic dissociation of ionic liquids

The effect of water and several organic solvents on the density, viscosity, and conductivity of ionic liquids (ILs) 1-n-butyl-3-methylimidazolium hexafluorophosphate ([bmim][PF6]), 1-n-butyl-3-methylimidazolium tetrafluoroborate ([bmim][BF4]), and 1-n-butyl-3-methylimidazolium trifluoroacetate ([bmim][CF3CO2]) was studied at 298.15 K in wide composition ranges. The density, viscosity, and conductivity of the three neat ILs were also determined at various temperatures. Upon the basis of the molar conductivity of the mixtures and that of the neat ILs of the same viscosity, the degree of dissociation of ILs in the solutions was investigated. It can be deduced that the organic solvents enhance the ionic association of the ILs, the effect depending on the solvent dielectric constant, while water promotes dissociation significantly due to its high dielectric constant and its ability to form strong hydrogen bonds with the anions of the ILs.     

Novel microemulsions: ionic liquid-in-ionic liquid

The hydrophobic IL 1-butyl-3-methylimidazolium hexafluorophosphate ([bmim][PF(6)]) can be dispersed in hydrophilic IL propylammonium formate (PAF) with the aid of surfactant AOT, and [bmim][PF(6)]-in-PAF microemulsions are formed.     

Aggregation behavior of a fluorinated surfactant in 1-butyl-3-methylimidazolium ionic liquids

The aggregation behavior of a fluorinated surfactant (FC-4) was studied by surface tension measurements in 1-butyl-3-methylimidazolium tetrafluoroborate ([bmim][BF 4]) and hexafluorophosphate ([bmim][PF 6]) at various temperatures. A series of surface properties, including adsorption efficiency (p C 20), effectiveness of surface tension reduction (Pi CAC), maximum surface excess concentration (Gamma max) and minimum surface area/molecule (A(min)) at the air-water interface were estimated. By comparing the fluorinated surfactant with traditional surfactants, we deduced that the surface activity of the fluorinated surfactant in ILs was superior to the activity of other surfactants. From the CAC values and their temperature dependence, we estimated the thermodynamic parameters of aggregate formation. The thermodynamic parameters indicate that the aggregate of FC-4 in [bmim][BF 4] is a traditional micelle, while the aggregate of FC-4 in [bmim][PF 6] is nanodroplets composed of FC-4 molecules segregated from the solution phase. These results were further confirmed by (1)H NMR measurements.     

Nonaqueous microemulsion-containing ionic liquid [bmim][PF6] as polar microenvironment

The phase behavior of toluene/Triton X-100 (TX-100)/1-butyl-3-methylimidazolium hexafluorophosphate([bmim][PF6]) was studied. It was demonstrated that the single-phase microemulsion area covered about 75% of the phase diagram at 25 °C. Electrical conductivities of the system with different w ([bmim][PF6]-to-TX-100 molar ratio) values were determined, and the results were used to locate the sub-regions of the single-phase microemulsion. The results showed that a transform from [bmim][PF6]-in-oil ([bmim][PF6]/O) microstructure via a bicontinuous region to an oil-in-[bmim][PF6] (O/[bmim][PF6]) microstructure occurred with the increase of Φ (weight fraction of TX-100 and [bmim][PF6] in the system). The aggregate size of the reverse microemulsions of [bmim][PF6]/O was determined using small-angle X-ray scattering. The results showed that the size of the reverse microemulsions depended markedly on the w values.     

Dynamics of solvent and rotational relaxation of coumarin 153 in room-temperature ionic liquid 1-butyl-3-methylimidazolium hexafluorophosphate confined in Brij-35 micelles: a picosecond time-resolved fluorescence spectroscopic study

The dynamics of solvent and rotational relaxation of Coumarin 153 (C-153) in ionic liquid (IL) 1-butyl-3-methylimidazolium hexafluorophosphate ([bmim][PF6]) and in the ionic liquid confined in Brij-35 micellar aggregates have been investigated using steady-state and time-resolved fluorescence spectroscopy. We observed slower dynamics in the presence of micellar aggregates as compared to the pure IL. However, the slowing down in the solvation time on going from neat IL to IL-confined micelles is much smaller compared to that on going from water to water-confined micellar aggregates. The increase in solvation and rotational time in micelles is attributed to the increase in viscosity of the medium. The slow component is assumed to be dependent on the viscosity of the solution and involves large-scale rearrangement of the anions and cations while fast component is assumed to originate from the initial response of the anions during excitation. The slow component increases due to the increase in the viscosity of the medium and increase in fast component is probably due to the hydrogen bonding between the anions and polar headgroup of the surfactant. The dynamics of solvent relaxation was affected to a small extent due to the micelle formation.     

Compressed CO2-enhanced solubilization of 1-butyl-3-methylimidazolium tetrafluoroborate in reverse micelles of Triton X-100

We carried out the first study about the effect of a compressed gas on the properties of reverse micellar solutions with ionic liquid (IL) polar cores. And the properties of compressed CO2/cyclohexane/1-butyl-3-methylimidazolium tetrafluoroborate ([bmim][BF4])/Triton X-100 (TX-100) system were investigated at 288.2, 293.2, 298.2, 308.2 K and different pressures by using phase behavior measurement, small-angle x-ray scattering, and UV-Vis techniques. The concentration of the surfactant in the solution was 0.3 mol/l (M). It was found that compressed CO2 could enhance solubilization of the IL in the reverse micelles considerably at suitable pressures, and formation of the reverse micelles could be controlled easily by pressure. Increase of CO2 pressure resulted in decrease of the micellar sizes at fixed [bmim][BF4]-to-surfactant molar ratios (w), and the size of the reverse micelles increased with the increase of w values. The polarity of the IL cores increased continuously with increasing w value.     

Effect of the structure of imidazolium cations in [BF4](-)-type ionic liquids on direct electrochemistry and electrocatalysis of horseradish peroxidase in Nafion films

The direct electrochemistry and bioelectrocatalysis of horseradish peroxidase (HRP) in Nafion films at glassy carbon electrode (GCE) was investigated in three [BF(4)](-)-type room-temperature ionic liquids (ILs) to understand the structural effect of imidazolium cations. The three ILs are 1-ethyl-3-methylimidazolium tetrafluoroborate ([Emim][BF(4)]), 1-butyl-3-methylimidazolium tetrafluoroborate ([Bmim][BF(4)]) and 1-hexyl-3-methylimidazolium tetrafluoroborate ([Hmim][BF(4)]). A small amount of water in the three ILs is indispensable for maintaining the electrochemical activity of HRP in Nafion films, and the optimum water contents decrease with the increase of alkyl chain length on imidazole ring. Analysis shows that the optimum water contents are primarily determined by the hydrophilicity of ILs used. In contrast to aqueous medium, ILs media facilitate the direct electron transfer of HRP, and the electrochemical parameters obtained in different ILs are obviously related to the nature of ILs. The direct electron transfer between HRP and GCE is a surface-confined quasi-reversible single electron transfer process. The apparent heterogeneous electron transfer rate constant decreases gradually with the increase of alkyl chain length on imidazole ring, but the changing extent is relatively small. The electrocatalytic reduction current of H(2)O(2) at the present electrode decreases obviously with the increase of alkyl chain length, and the mass transfer of H(2)O(2) via diffusion in ILs should be responsible for the change. In addition, the modified electrode has good stability and reproducibility; the ability to tolerate high levels of F(-) has been greatly enhanced due to the use of Nafion film. When an appropriate mediator is included in the sensing layer, a sensitive nonaqueous biosensor could be fabricated.     

Headspace Single Drop Microextraction Using Micellar Ionic Liquid Extraction Solvents

A headspace single drop microextraction (SDME) method using extraction solvents comprised of micellar ionic liquids (ILs) was used to perform the extraction of 17 aromatic compounds from aqueous solution and coupled with liquid chromatography. The effects of various experimental parameters including type of micellar IL extraction solvent, stir rate, extraction time, volume of the microdroplet, and addition of organic solvent were investigated and optimized. Two different micellar solutions were formed by dissolving 1-decyl-3-methylimidazolium bromide ([DMIM][Br]) and sodium dodecyl sulfate (SDS) in 1-butyl-3-methylimidazolium chloride ([BMIM][Cl]). It was observed that the enrichment factors of the 17 studied compounds were all enhanced with the micellar ionic liquid extraction solvent compared to the neat [BMIM][Cl] IL. The highest sensitivity was obtained with the [BMIM][Cl]–[DMIM][Br] micellar solution for polycyclic aromatic hydrocarbons (PAHs) with high molecular weight and fused rings while the [BMIM][Cl]–SDS micellar solution was proven to be more sensitive for smaller, more polar molecules. The detection limits were lower when utilizing the [BMIM][Cl]–SDS and [BMIM][Cl]–[DMIM][Br] extraction solvents compared to the neat [BMIM][Cl] extraction solvent. The reproducibility of the extraction method at 20 °C using extraction solvents composed of [BMIM][Cl]–SDS and [BMIM][Cl]–[DMIM][Br] ranged from 6.7 to 14.0 and 4.2 to 14.7%, respectively.     

Unusual solvatochromism within 1-butyl-3-methylimidazolium hexafluorophosphate + poly(ethylene glycol) mixtures

Hybrid "green" solvent systems composed of room-temperature ionic liquids (ILs) and poly(ethylene glycols) (PEGs) may have enormous future potential. Solvatochromic absorbance probe behavior is used to assess the physicochemical properties of the mixture composed of IL 1-butyl-3-methylimidazolium hexafluorophosphate ([bmim][PF(6)]) and PEG (average molecular weights of 200, 400, 600, and 1500) at ambient conditions. Lowest energy intramolecular charge-transfer absorbance maxima of a betaine dye, i.e., E(T)(N), indicates the dipolarity/polarizability and/or hydrogen-bond donating (HBD) acidity of the [bmim][PF 6] + PEG mixtures to be even higher than that of neat [bmim][PF(6)], the solution component with higher dipolarity/polarizability and/or HBD acidity. Dipolarity/polarizability (pi*) obtained separately from the electronic absorbance response of probe N, N-diethyl-4-nitroaniline shows a trend similar to E(T)(N ) thus confirming the unusually high dipolarity/polarizability of the [bmim][PF(6)] + PEG mixtures. Similar to E(T)(N ) and pi*, the HBD acidity (alpha) of [bmim][PF(6)] + PEG mixtures is also observed to be anomalously high. Contrary to what is observed for E(T)(N ), pi*, and alpha, the hydrogen-bond accepting (HBA) basicity (beta) of the [bmim][PF(6)] + PEG mixtures is observed to be lower than that predicted from ideal additive behavior indicating diminished HBA basicity of the mixture as compared to its neat components. A four-parameter simplified combined nearly ideal binary solvent/Redlich-Kister (CNIBS/R-K) equation is shown to satisfactorily predict the solvatochromic parameters within [bmim][PF(6)] + PEG mixtures. It is demonstrated that [bmim][PF(6)] + PEG mixtures possess physicochemical properties that are superior to those of either the neat IL or the neat PEG.     

Dynamics of solvent and rotational relaxation of coumarin-153 in room-temperature ionic liquid 1-butyl-3-methyl imidazolium tetrafluoroborate confined in poly(oxyethylene glycol) ethers containing micelles

We have investigated solvent and rotational relaxation of coumarin 153 (C-153) in room-temperature ionic liquid (RTILs) 1-butyl-3-methyl-imidazolium tetrafluoroborate ([bmim][BF(4)]) and the ionic liquid confined in alkyl poly(oxyethylene glycol) ethers containing micelles. We have used octaethylene glycol monotetradecyl ether (C(14)E(8)) and octaethylene glycol monododecyl ether (C(12)E(8)) as surfactants. In the [bmim][BF(4)]-C(14)E(8) micelle, we have observed only a 22% increase in solvation time compared to neat [bmim][BF(4)], whereas in the [bmim][BF(4)]-C(12)E(8) system, we have observed approximately 57% increase in average solvation time due to micelle formation. However, the slowing down in solvation time on going from neat RTIL to RTIL-confined micelles is much smaller compared to that on going from water to water confined micellar aggregates. The 22-57% increase in solvation time is attributed to the slowing down of collective motions of cations and anions in micelles. The rotational relaxation times become faster in both the micelles compare to neat [bmim][BF(4)].     

Nucleophilicity in ionic liquids. 3. Anion effects on halide nucleophilicity in a series of 1-butyl-3-methylimidazolium ionic liquids

We have continued the study of halide nucleophilicity in ionic liquids, concentrating on the effect of changing the anion ([BF(4)](-), [PF(6)](-), [SbF(6)](-), [OTf](-), and [N(Tf)(2)](-)) when the cation is [bmim](+) (where bmim = 1-butyl-3-methylimidazolium). It was found that the nucleophilicities of all the halides were lower in all of the ionic liquids than in dichloromethane. Changing the anion affected the order of halide nucleophilicity, e.g., in [bmim][BF(4)] the order of nucleophilicity was Cl(-)>Br(-)>I(-) while in [bmim][N(Tf)(2)] the order was Cl(-)相似文献   

Microwave-assisted separation of ionic liquids from aqueous solution of ionic liquids

Microwave-assisted separation has been applied to recover ionic liquid (IL) from its aqueous solution as an efficient method with respect to time and energy compared to the conventional vacuum distillation. Hydrophilic ILs such as 1-butyl-3-methylimidazolium tetrafluoroborate ([Bmim][BF(4)]), 1-butyl-3-methylimidazolium trifluoromethanesulfonate ([Bmim][TfO]) and 1-ethyl-3-methylimidazolium methylsulfate ([Emim][MS]) could be recovered in 6 min from the mixture of ILs and water (1:1, w/w) under microwave irradiation at constant power of 10 W while it took at least 240 min to obtain ILs containing same water content (less than 0.5 wt%) by conventional vacuum oven at 363.15 K with 90 kPa of vacuum pressure. Energy consumptions per gram of evaporated water from the homogeneous mixture of hydrophilic ILs and water (1:1, w/w) by microwave-assisted separation were at least 52 times more efficient than those in conventional vacuum oven. It demonstrated that microwave-assisted separation could be used for complete recovery of ILs in sense of time and energy as well as relevant purity.     

添加中低浓度离子液体[bmim][BF4]对吐温-20临界胶束浓度和胶束结构的影响

添加离子液体会对表面活性剂在水溶液中的聚集行为产生重要影响。本文研究了吐温-20在中低浓度离子液体四氟硼酸1-丁基-3-甲基咪唑鎓([bmim][BF_4])中的胶束化行为。随着[bmim][BF_4]浓度(cIL)从0增加到0.2mol·L~(-1),吐温-20的临界胶束浓度逐渐增大。相比cIL0.05mol·L~(-1),在cIL0.05mol·L~(-1)时加入[bmim][BF_4]使吐温-20临界胶束浓度增大得更加显著。吐温-20胶束聚集数随着离子液体浓度的增加而逐渐减小,这一结果也说明加入离子液体会对吐温-20胶束的生成有抑制作用。吐温-20胶束化热力学研究表明,吐温-20在不同浓度离子液体中的胶束化是熵、焓共同驱动,并具有熵-焓补偿性。随着离子液体浓度的增加,吐温-20胶束平均粒径和胶束微粘性均表现出先增大后减小的变化,在cIL=0.05mol·L~(-1)时达到最大值。     

Colloidal stability of bare and polymer-grafted silica nanoparticles in ionic liquids

The colloidal stability of bare and poly(methyl methacrylate) (PMMA)-grafted silica nanoparticles was studied in 1-alkyl-3-methylimidazolium ([C(n)mim])-based ionic liquids (ILs) with different anionic structures. The theoretical estimation of the colloidal interaction between monodispersed bare silica particles by using the Derjaguin-Landau-Verwey-Overbeek theory indicates that bare silica particles cannot be stabilized and they rapidly form aggregates in all the ILs used in this study. The instability of bare silica particles was experimentally confirmed by dynamic light scattering measurement and in situ transmission electron microscopy observations by utilizing the negligible vapor pressure of ILs. This evidence suggests that electrostatic stabilization is inefficient in ILs because of the high ionic atmosphere and the resulting surface-charge screening. The PMMA-grafted silica particles exhibited long-term colloidal stability in [C(4)mim][PF(6)] and [C(n)mim][NTf(2)], which are compatible with the grafted PMMA. On the other hand, the PMMA-grafted particles could not be stabilized in [C 4mim][BF 4] due to the poor solubility of the grafted PMMA in the IL. Effective steric stabilization is important for obtaining stable colloidal particles in ILs.