Experimental Research of OH and N<Stack><Subscript>2</Subscript><Superscript>+</Superscript></Stack> Spatially Resolved Spectra in a Needle-Plate Pulsed Streamer Discharge

In this study, the spatial distributions of the emission intensity of OH (\(\hbox{A}^{2}\Upsigma {\rightarrow}\hbox{X}^{2}\Uppi,\) 0-0) and \(\hbox{N}_{2}^{+} (\hbox{B}^{2}\Upsigma_{\rm u}^{+}\rightarrow \hbox{X}^{2}\Upsigma_{\rm g}^{+},\) 0-0, 391.4 nm) are investigated in the atmospheric pressure pulsed streamer discharge of H₂O and N₂ mixture in a needle-plate reactor configuration. The effects of pulsed peak voltage, pulsed repetition rate, input power, and O₂ flow rate on the spatial distributions of the emission intensity of OH (\(\hbox{A}^{2}\Upsigma {\rightarrow}\hbox{X}^{2}\Uppi,\) 0-0), \(\hbox{N}_{2}^{+} (\hbox{B}^{2}\Upsigma _{\rm u}^{+} \rightarrow \hbox{X}^{2}\Upsigma _{\rm g}^{+},\) 0-0, 391.4 nm), and the vibrational temperature of N₂ (C) in the lengthwise direction from needle to plate are attained. It is found that the emission intensities of OH (\(\hbox{A}^{2}\Upsigma {\rightarrow}\hbox{X}^{2}\Uppi,\) 0-0) and \(\hbox{N}_{2}^{+} (\hbox{B}^{2}\Upsigma_{\rm u}^{+} \rightarrow \hbox{X}^{2}\Upsigma_{\rm g}^{+},\) 0-0, 391.4 nm) rise with increasing the pulsed peak voltage, the pulsed repetition rate and the input power, and decrease with increasing O₂ flow rate. In the direction from needle to plate, the emission intensity of OH (\(\hbox{A}^{2}\Upsigma {\rightarrow}\hbox{X}^{2}\Uppi,\) 0-0) decreases firstly, and rises near the plate electrode, while the emission intensity of \(\hbox{N}_{2}^{+}(\hbox{B}^{2}\Upsigma_{\rm u}^{+} \rightarrow \hbox{X}^{2}\Upsigma_{\rm g}^{+},\) 0-0, 391.4 nm) is nearly constant along the needle to plate direction firstly, and rises sharply near the plate electrode. The vibrational temperature of N₂ (C) is almost independent of the pulsed peak voltage and the pulsed repetition rate, but rises with increasing the O₂ flow rate and keeps nearly constant in the lengthwise direction. The main physicochemical processes involved are discussed.     

The Radial Distribution of Ions and Electrons in RF Inductively Coupled H<Subscript>2</Subscript>/T<Subscript>2</Subscript>B Plasmas

A glow discharge polymer (GDP) was fabricated using trans-2-butene (T₂B) and hydrogen (H₂) via a plasma-enhanced chemical vapor deposition (PECVD) system. The uniformity of the GDP films was significantly affected by the radial distribution of the H₂/T₂B plasma parameters. The plasma properties while discharging by a multi-carbon gas source of mixed H₂/T₂B were investigated during the GDP deposition process. The main positive ions and ion energy distributions in inductively coupled H₂/T₂B plasmas were analyzed by energy-resolved mass spectrometer (MS), and the electron density and the effective electron temperature were mainly analyzed using a Langmuir probe. The MS results show that the main positive ions in the plasmas are \({\text{C}}_{ 2} {\text{H}}_{ 4}^{ + }\), \({\text{C}}_{ 2} {\text{H}}_{ 6}^{ + }\), \({\text{C}}_{ 3} {\text{H}}_{ 3}^{ + }\), \({\text{C}}_{ 3} {\text{H}}_{ 6}^{ + }\), \({\text{C}}_{ 3} {\text{H}}_{ 8}^{ + }\), \({\text{C}}_{ 4} {\text{H}}_{ 5}^{ + }\), \({\text{C}}_{ 4} {\text{H}}_{ 1 0}^{ + }\), \({\text{C}}_{ 5} {\text{H}}_{ 5}^{ + }\), and \({\text{C}}_{ 5} {\text{H}}_{ 7}^{ + }\) with mass-to-charge ratios (m/e) of 28, 30, 39, 42, 44, 53, 58, 65, and 67, respectively. For a normalized ion intensity, the relative intensities of saturated CH ions increase with increasing radial distance, while the unsaturated CH ions decrease with increasing radial distance. The ion energy distribution of \({\text{C}}_{ 2} {\text{H}}_{ 6}^{ + }\) (m/e = 30) presents a bimodal structure. Additionally, both the electron density and the effective electron temperature decrease with increasing radial distance.     

Thermochemical Properties of Dissolution of Nicotinic Acid C<Subscript>6</Subscript>H<Subscript>5</Subscript>NO<Subscript>2</Subscript>(s) in Aqueous Solution

Nicotinic acid (also known as niacin) was recrystallized from anhydrous ethanol. X-ray crystallography was applied to characterize its crystal structure. The crystal belongs to the monoclinic system, space group P2₍₁₎/c. The crystal cell parameters are a = 0.71401(4) nm, b = 1.16195(7) nm, c = 0.71974(6) nm, α = 90°, β = 113.514(3)°, γ = 90° and Z = 4. Molar enthalpies of dissolution of the compound, at different molalities m/(mol·kg^?1) were measured with an isoperibol solution–reaction calorimeter at T = 298.15 K. The molar enthalpy of solution at infinite dilution was calculated, according to Pitzer’s electrolyte solution model and found to be \( \Delta_{\text{sol}} H_{m}^{\infty } = ( 2 7. 3 \pm 0. 2) \) kJ·mol^?1 and Pitzer’s parameters (\( \beta_{{\text{MX}}}^{{\text{(0)}L}} \), \( \beta_{{\text{MX}}}^{{\text{(1)}L}} \) and \( C_{{\text{MX}}}^{\phi L} \)) were obtained. The values of apparent relative molar enthalpies (\( {}^{\phi }L \)) and relative partial molar enthalpies (\( \overline{{L_{2} }} \) and \( \overline{{L_{1} }} \)) of the solute and the solvent at different molalities were derived from the experimental enthalpy of dissolution values of the compound. Also, the standard molar enthalpy of formation of the anion \( {\text{C}}_{ 6} {\text{H}}_{ 4} \text{NO}_{2}^{-} \) in aqueous solution was calculated to be \( {\Delta_{\text{f}}^{} H}_{\text{m}}^{\text{o}} ({\text{C}}_{ 6} {\text{H}}_{ 4} {\text{NO}}_{2}^{-} \text{,aq}) = - \left( {603.2 \pm 1.2} \right)\;{\text{kJ}}{\cdot}{\text{mol}}^{-1} \).     

The Study of Intermolecular Interactions for <Emphasis Type="SmallCaps">dl</Emphasis>-Alanine and Glycine in Aqueous <Emphasis Type="SmallCaps">l</Emphasis>(+)-Arabinose Solutions at Different Temperatures and Ambient Pressure,Using the Volumetric Approach

Density measurements are used to calculate the apparent molar volumes V_φ, limiting apparent molar volumes \(V_{\varphi }^{0}\), limiting apparent molar volumes of transfer, \(\Delta_{\text{t}} V_{\varphi }^{0}\), limiting apparent molar expansibilities, \(E_{\varphi }^{0}\), and hydration numbers n_H, for dl-alanine and glycine in aqueous solutions of l(+)-arabinose at T?=?293.15 to 313.15 K. To obtain the limiting apparent molar volume, the V_φ values are extrapolated to zero molality using the linear form of the Redlich–Meyer equation. Also, the limiting apparent molar volumes of transfer, \(\Delta_{\text{t}} V_{\varphi }^{0}\), for the amino acids, from water to aqueous l(+)-arabinose solutions, are calculated from the \(V_{\varphi }^{0}\) values. The limiting apparent molar expansibility, \(E_{\varphi }^{0}\), values have been obtained from the first derivative of limiting apparent molar volumes with respect to temperature. Also the hydration number, n_H, for both amino acids in the ternary solutions are estimated. Possible solute–solvent interactions in the studied ternary systems are discussed.     

Volumetric Investigations on Molecular Interactions of Glycine/<Emphasis Type="SmallCaps">l</Emphasis>-alanine in Aqueous Citric Acid Solutions at Different Temperatures

Apparent molar volumes \((\phi_{V})\) of glycine/l-alanine in water and in aqueous citric acid (CA) solutions of varying concentrations, i.e. (0.05, 0.10, 0.20, 0.30, 0.40 and 0.50) mol·kg^?1 were determined from density measurements at temperatures T?=?(288.15, 298.15, 308.15, 310.15 and 318.15) K and at atmospheric pressure. Limiting partial molar volumes \((\phi_V^{\text{o}})\) and their corresponding partial molar volumes of transfer \((\Delta_{\text{tr}} \phi_{V} )\) have been calculated from the \(\phi_{V}\) data. The negative \(\Delta_{\text{tr}} \phi_{V}\) values obtained for glycine/l-alanine from water to aqueous CA solutions indicate the dominance of hydrophilic–hydrophobic/hydrophobic–hydrophilic and hydrophobic–hydrophobic interactions over ion/hydrophilic–dipolar interactions. Further, pair and triplet interaction coefficients, i.e. \((V_{\text{AB}} )\;{\text{and}}\; (V_{\text{ABB}} )\) along with hydration number \((n_{\text{H}} )\) have also been calculated. The effect of temperature on the volumetric properties of glycine/l-alanine in water and in aqueous CA solutions has been determined from the limiting partial molar expansibilities \((\partial \phi_{V}^{\text{o}} /\partial T)_{p}\) and their second-order derivative \((\partial^{2} \phi_{V}^{\text{o}} /\partial T^{2} )_{{P}}\). The apparent specific volumes \((\nu_{\phi} )\) for glycine and l-alanine tend to approach sweet taste behavior both in the presence of water and in aqueous CA solutions. The \(\nu_{\phi}\) values for glycine/l-alanine increase with increase in concentration of CA at all temperatures studied. This reveals that CA helps in enhancing the sweet taste behavior of glycine/l-alanine which also supports the dominance of hydrophobic–hydrophobic interactions.     

Aromaticity of Bare Iridium Trimers and Ir3M0/+ and $$\rm{Ir}_3M_2^{+/3+}$$ (M = Li,Na, K,and Be,Ca) Bimetallic Clusters

The structural stabilities, bonding nature, electronic properties, and aromaticity of bare iridium trimers \(\rm{Ir}_3^{+/-}\) with different geometries and spin multiplicities are studied at the DFT/B3LYP level of theory. The ground state of the \(\rm{Ir}_3^{+}\) cation is found to be the ³A₂ (C_2v) triplet state and the ground state of the \(\rm{Ir}_3^{-}\) anion the ⁵A₂ (C_2v) quintet state. A detailed molecular orbital (MO) analysis indicates that the ground-state \(\rm{Ir}_3^{+}\) ion (C_2v, ³A₂) possesses double (σ and partial δ) aromaticity as well as the ground-state \(\rm{Ir}_3^{-}\) ion (C_2v, ⁵A₂). The multiple d-orbital aromaticity is responsible for the totally delocalized three-center metal-metal bond of the triangular Ir₃ framework. \(\rm{Ir}_3^{-}\) (C_2v, ¹A₁) structure motif is perfectly preserved in pyramidal Ir₃M^0/+ (C_s, ¹A′) and bipyramidal \(\rm{Ir}_3M_2^{+/3+}\) (C_2v, ¹A₁) (M = Li, Na, K and Be, Ca) bimetallic clusters which also possess the corresponding d-orbital aromatic characters.     

Nested wreath groups and their applications to phylogeny in biology and Cayley trees in chemistry and physics

Nested wreath product groups arise from looped or recursive structures that contain repeated copies of the same structure one within the other. Phylogeny trees in biology, Cayley trees, Bethe lattices, NMR graphs of non-rigid molecules, ammoniated ammonium ions are all examples of structures that exhibit such nested wreath product automorphism groups. We show that the conjugacy classes, irreducible representations and character tables of these nested group structures can be generated using multinomial generating functions cast in terms of matrix types that can be simplified into generalized cycle type polynomials. The nested wreath product groups rapidly increase in orders, for example, a simple wreath product group \(\hbox {S}_{7}[\hbox {S}_{7}]\) consists of \((7!)^{8}\) or \(4.1633\times 10^{23}\) operations, 481,890 conjugacy classes, spanning a 481,891 \(\times \) 481,891 character table that would occupy 232,217,972 pages. We have obtained powerful recursive relations for the conjugacy classes, character tables and the orders of various conjugacy cases of any nested wreath product \(\{[\hbox {S}_{\mathrm{n}}]\}^{\mathrm{m}}\) or \(\hbox {S}_{\mathrm{n}}[\hbox {S}_{\mathrm{n}}[\hbox {S}_{\mathrm{n}}{\ldots }.[\hbox {S}_{\mathrm{n}}]]{\ldots }.]\) with order \(\left( {n!}\right) ^{a_m},\,\hbox {a}_{\mathrm{m}}=(\hbox {n}^{\mathrm{m}}-1)/(\hbox {n}-1)\). We have obtained the character tables of phylogenetic trees of any order, character tables of Cayley trees of degrees 3 and 4 and for Cayley trees of larger degrees, we have derived exact analytical expressions for the conjugacy classes and IRs for up to \(\{[\hbox {S}_{7}]\}^{\mathrm{m}}\) with order \((7!)^{137257}\) for \(\hbox {m}=7\). Applications to colorings of phylogenic trees in biology are considered.     

Hierarchical enumeration of Kekulé’s benzenes,Ladenburg’s benzenes,Dewar’s benzenes,and benzvalenes by using combined-permutation representations

The group hierarchy for each skeleton of ligancy 6 is formulated to be: point group (PG \({\varvec{G}}_{\sigma }\)) \(\subseteq \) RS-stereoisomeric group (RS-SIG \({\varvec{G}}_{\sigma \widetilde{\sigma }\widehat{I}}\)) \(\subseteq \) stereoisomeric group (SIG \(\widetilde{{\varvec{G}}}_{\sigma \widetilde{\sigma }\widehat{I}}\)) \(\subseteq \) isoskeletomeric group (ISG \(\widetilde{\widetilde{{\varvec{G}}}}_{\sigma \widetilde{\sigma }\widehat{I}}\) = \({\varvec{S}}^{[6]}_{\sigma \widehat{I}}\)), where we start from the PG \({\varvec{G}}_{\sigma }\) = \({\varvec{D}}_{6h}\) for the Kekulé benzene skeleton, from the PG \({\varvec{G}}_{\sigma }\) = \({\varvec{D}}_{3h}\) for the Ladenburg benzene skeleton, from the PG \({\varvec{G}}_{\sigma }\) = \({\varvec{C}}_{2v}\) for the Dewar benzene skeleton, or from the PG \({\varvec{G}}_{\sigma }\) = \({\varvec{C}}_{2v}\) for the benzvalene skeleton. After these groups are constructed as combined-permutation representations, the calculation of the respective cycle indices with chirality fittingness (CI-CFs) and the introduction of ligand-inventory functions are conducted to give generation functions for 3D-based enumerations (for PGs and RS-SIGs) and 2D-based enumerations (for SIGs and ISGs). The enumeration results are discussed by means of isomer-classification diagrams, in which equivalence classes under enantiomerism (for PGs), RS-stereoisomerism (for RS-SIGs), stereoisomerism (for SIGs), and isoskeletomerism (for ISGs) are illustrated schematically. The implicit connotations of the conventional terms “skeletal isomerism”, “positional isomerism”, and “constitutional isomerism” are discussed, where the effects of the concept of isoskeletomerism are emphasized.     

Inclusion complexes of $$\hbox{cholesteryl-(}\varepsilon\hbox{-caprolactone})_{\overline{10}}$$ functionalized polymer with γ-cyclodextrin

An inclusion complex (IC) of γ-cyclodextrin with biodegradable \(\hbox{cholesteryl-(}\varepsilon\hbox{-caprolactone})_{\overline{10}}\) \(\hbox{(Chol-(CL)}_{\overline{10}})\) functionalized polymer was prepared by using a general method of mixing solution. The formation of \(\gamma \hbox{-CD-Chol-(CL)}_{\overline{10}}\) IC was determined by Fourier transform infrared (FTIR),¹H-NMR, differential scanning calorimetry (DSC), and wide angle X-ray diffraction (WAXD), respectively. The results indicated that the \(\hbox{oligo}(\varepsilon\hbox{-CL})_{\overline{10}}\) blocks as well as the end cholesteryl moiety of the functionalized polymer were included and covered by γ-CD in a single-stranded mode in the \(\gamma \hbox{-CD-Chol-(CL)}_{\overline{10}}\) ICs. Moreover, the \(\gamma \hbox{-CD-Chol-(CL)}_{\overline{10}}\) ICs had a channel-type crystalline structure similar to that formed between the poly(propylene glycol) (PPG) and γ-CD. Finally, TGA revealed that the ICs had better thermal stability than their free components due to the inclusion complexation.     

Compatibility of activity coefficients estimated experimentally and by Pitzer equations for the assessment of seawater pH

Calibration of pH meters is usually performed with reference pH buffer solutions of low ionic strength, I ≤ 0.1 mol kg^?1. For seawater pH measurements (I ≈ 0.7 mol kg^?1), calibration buffers in high ionic strength matrix are required. The Harned cell, in association with the Nernst equation and a model for estimating the chloride ion activity coefficient, \(\gamma_{{{\text{Cl}}^{ - } }} ,\) is the basis of the primary method for pH assignment to reference pH buffers. The semi-empirical Pitzer model is, in principle, adequate to estimate \(\gamma_{{{\text{Cl}}^{ - } }}\) of complex solutions, namely seawater. Nevertheless, no assessment of the validity of the model for this matrix is known to the authors. This work aims at estimating the adequacy of the Pitzer model by assessing the metrological compatibility of mean activity coefficients, in this case \(\gamma_{ \pm } = \sqrt {\gamma_{{{\text{H}}^{ + } }} \gamma_{{{\text{Cl}}^{ - } }} }\) estimated experimentally with the Harned cell, \(\gamma_{ \pm }^{\text{Exp}} ,\) and using the Pitzer model, \(\gamma_{ \pm }^{\text{Ptz}}\). The measurement uncertainty considered in the compatibility test was estimated using the bottom-up approach, where components were combined by the numerical Kragten method after checking its adequacy. The compatibility of the estimated \(\gamma_{ \pm }\) was assessed for solutions with increasing complexity and an ionic strength of 0.67 mol kg^–1. \(\gamma_{ \pm }^{\text{Exp}}\) and \(\gamma_{ \pm }^{Ptz}\) are metrologically compatible for a confidence level of 95 % where the relative standard uncertainty of their difference ranged from 1.1 % to 3.1 % in all chloride solutions to approximately 6.3 % when sodium sulfate was also present. This led to assume the validity of the Pitzer model equations to estimate \(\gamma_{{{\text{Cl}}^{ - } }} ,\) required to define reference pH values of buffer solutions with high ionic strength.     

Solubility Thermodynamics of CyMe$$_{}$$-BTBP in Various Diluents Mixed with TBP

The two organic ligands 6,6′-bis(5,5,8,8-tetramethyl-5,6,7,8-tetrahydrobenzo[1,2,4]triazin-3-yl)[2,2′]bipyridine (CyMe\(_{4}\)-BTBP) and tri-butyl phosphate (TBP) have previously been investigated in different diluents for use within recycling of used nuclear fuel through solvent extraction. The thermodynamic parameters, \(K_{\mathrm{S}}\), \(\Delta C_{p}\), \(\Delta H^{0}\) and \(\Delta S^{0}\), of the CyMe\(_{4}\)-BTBP solubility in three diluents (cyclohexanone, octanol and phenyl trifluoromethyl sulfone) mixed with TBP have been studied at 288, 298 and 308 K, both as pristine solutions and pre-equilibrated with 4 mol\(\cdot \)L\(^{-1}\) nitric acid. In addition, the amount of acid in the organic phase and density change after pre-equilibration have been measured. The solubility of CyMe\(_{4}\)-BTBP increases with an increased temperature in all systems, especially after acid pre-equilibration. This increased CyMe\(_{4}\)-BTBP solubility after pre-equilibration could be explained by acid dissolution into the solvent. Comparing the \(\Delta H^{0}\) and \(\Delta S^{0}\) calculated using \(\Delta C_{p}\) with the same parameters derived from a linear fit indicates temperature independence of all three thermodynamic systems. The change in enthalpy is positive in all solutions.     

Thermodynamic analysis of the structure of aqueous solutions of C<Subscript>12</Subscript>–C<Subscript>18</Subscript> hydrocarbons

Thermodynamic cycles including the increments \(\Delta G_{CH_2 }^0 , \Delta H_{CH_2 }^0 \), and \(T\Delta S_{CH_2 }^0 \) were constructed for dissolution, evaporation, hydrophobic hydration of C₅–C₉ hydrocarbons, and transfer from vapor (\(\Delta G_{CH_2 }^0 \) = ?0.7 kJ·mol^?1, \(\Delta H_{CH_2 }^0 \) = 2.9 kJ·mol^?1, \(T\Delta S_{CH_2 }^0 \) = 3.6 kJ·mol^?1) and water (\(\Delta G_{CH_2 }^0 \) = ?1.4 kJ·mol^?1, \(\Delta H_{CH_2 }^0 \) = 5.8 kJ·mol^?1, \(T\Delta S_{CH_2 }^0 \) = 7.2 kJ·mol^?1) to micelles of C₁₂–C₁₈ hydrocarbons. The formation of bistable hydrated micelles of C₁₂–C₁₈ is explained by a transition between the order-disorder states in an assembly of small (nano) systems of water. The extensive parameters of small systems and critical phenomena predicted by fluctuation theory are discussed.     

Special function representations of the Poisson kernel on hyperbolic spaces

In this paper we compute explicit formulae for the Poisson kernels on the hyperbolic upper half-space \(\mathbf {H}^{n}\) and the Poincaré unit ball \(\mathbf {D}^{n}\). We first construct an associated Legendre function expression for eigenfunctions of the Laplacian and use superposition principle to get a solution for the Laplace equation on \(\mathbf {H}^{n}\). The Poisson kernel on \(\mathbf {D}^{n}\) is obtained from that on \(\mathbf {H}^{n}\) by letting the hyperbolic distance \(\rho =d(w,w')\) \((w,w'\in \mathbf {H}^{n})\) tend to infinity. These Poisson kernels, apart from being interesting in their own right lead to various identities that seem to be novel in the context of special functions.     

Dependence of the density of solutions of alkali metal halides on the composition of methylpyrrolidone-water mixed solvents

The densities of solutions of alkali metal halides in methylpyrrolidone (MP)-water mixtures were measured at 298.15 K over the entire range of mixed solvent compositions. The standard partial molar volumes of the electrolytes \(\overline {V_2^ \circ } \) were calculated. The \(\overline {V_2^ \circ } \) values of alkali metal halides in MP-H₂O mixtures were related linearly to the \(\overline {V_2^ \circ } \) values in aqueous solutions. These dependences were used to determine the standard partial molar volumes of ions \(\overline {V_i^ \circ } \) in the mixtures studied. The standard partial molar volumes of transfer of the ions from water into MP-water mixtures were calculated.     

Isopoly Tungstate Anions in Water–Dimethyl Sulfoxide Solutions

The formation of isopoly tungstate anions (IPTAs) in water–dimethyl sulfoxide (DMSO) solutions was studied by potentiometric titration, followed by mathematical modeling, and electronic absorption spectroscopy. Logarithmic equilibrium constants and Gibbs free energies were calculated for IPTA formation from \(\rm{WO}_4^{2-}\) and Н⁺ in the \(\rm{WO}_4^{2-}\)–H⁺(DMSO = dimethyl sulfoxide) system for various solution acidities Z=v(H⁺)/v(\(\rm{WO}_4^{2-}\)). A scheme was suggested for IPTA interconversions at various DMSO contents in solution. Dimethyl sulfoxide was found to have a stabilizing effect on [W₇O₂₄]^6– and [W₁₀O₃₂]^4– anions. The distribution diagrams and the calculated thermodynamic parameters of IPTA formation were used to determine optimal conditions for preparing decatungstates from water–DMSO solutions, which consisted in using sodium tungstate solutions acidified to Z = 1.60 and containing ?(DMSO) = 40%.     

Ab initio investigation of the lower-energy candidate structures for (H<Subscript>2</Subscript>O)<Subscript>10</Subscript><Superscript>+</Superscript> water cluster

Low-lying structures of water cationic clusters and the compounds with the OH radical have become a hot topic in recent years. We here investigate the cluster \( {\left({\mathrm{H}}_2\mathrm{O}\right)}_{10}^{+} \) and calculate its ideal structures by the quantum chemical calculation together with the particle swarm optimization method. We analyzed the properties of the obtained lower-energy isomers of \( {\left({\mathrm{H}}_2\mathrm{O}\right)}_{10}^{+} \). Their energies are further re-optimized and demonstrated at three different methods with two basis sets. Based on our numerical calculations, a new cage-like structure of \( {\left({\mathrm{H}}_2\mathrm{O}\right)}_{10}^{+} \) with the lowest energy is obtained at MP2/aug-cc-pVDZ level. Our results showed the comparison of energy order at different conditions and demonstrated the influence of temperature on the relative Gibbs energy and IR spectra. Moreover, we also contained the molecule orbitals to discuss the stability of these representative isomers.     

Sparse and nonnegative sparse D-MORPH regression

An underdetermined linear algebraic equation system \(\mathbf{y}={\varvec{\Phi }}\mathbf{x}\), where \({\varvec{\Phi }}\) is an \(m\times n (m<n)\) rectangular constant matrix with rank \(r\le m\) and \(\mathbf{y}\in \mathrm {Ran}({\varvec{\Phi }})\) (range of \({\varvec{\Phi }})\), has an infinite number of solutions. Diffeomorphic modulation under observable response preserving homotopy (D-MORPH) regression seeks a solution satisfying the extra requirement of minimizing a chosen cost function, \({\mathcal {K}}\). A wide variety of choices of the cost function makes it possible to achieve diverse goals, and hence D-MORPH regression has been successfully applied to solve a range of problems. In this paper, D-MORPH regression is extended to determine a sparse or a nonnegative sparse solution of the vector \(\mathbf{x}\). For this purpose, recursive reweighted least-squares (RRLS) minimization is adopted and modified to construct the cost function \({\mathcal {K}}\) for D-MORPH regression. The advantage of sparse and nonnegative sparse D-MORPH regression is that the matrix \({\varvec{\Phi }}\) does not need to have row-full rank, thereby enabling flexibility to search for sparse solutions \(\mathbf{x}\) with ancillary properties in practical applications. These tools are applied to (a) simulation data for quantum-control-mechanism identification utilizing high dimensional model representation (HDMR) modeling and (b) experimental mass spectral data for determining the composition of an unknown mixture of chemical species.     

The heat capacity and density of solutions of barium and tetrabutylammonium iodides in N-methylpyrrolidone at 298.15 K

The heat capacity and density of solutions of barium and tetrabutylammonium iodides in N-methylpyrrolidone (MP) were studied at 298.15 K by calorimetry and densimetry. The standard partial molar heat capacities and volumes (\(\overline {C_{p^2 }^ \circ } \) and \(\overline {V_2^ \circ } \)) of the electrolytes in MP were calculated. The standard heat capacities \(\overline {C_{pi}^ \circ } \) and volumes \(\overline {V_i^ \circ } \) of the Ba²⁺ and (C₄H₉)₄N⁺ ions in solution in MP at 298.15 K were determined. With the tetrabutylammonium ion, these values were in agreement with those calculated on the basis of the tetraphenylarsonium-tetraphenyl borate and tetraphenylphosphonium-tetraphenyl borate assumptions. The results are discussed in relation to the special features of solvation in solutions of the salts studied.     

Intrinsic ratios of glucose,fructose, glycerol and ethanol <Superscript>13</Superscript>C/<Superscript>12</Superscript>C isotopic ratio determined by HPLC-<Emphasis Type="Italic">co</Emphasis>-IRMS: toward determining constants for wine authentication

High-performance liquid chromatography linked to isotope ratio mass spectrometry (HPLC-co-IRMS) via a Liquiface© interface has been used to simultaneously determine ¹³C isotope ratios of glucose (G), fructose (F), glycerol (Gly) and ethanol (Eth) in sweet and semi-sweet wines. The data has been used the study of wine authenticity. For this purpose, 20 authentic wines from various French production areas and various vintages have been analyzed after dilution in pure water from 20 to 200 times according to sugar content. If the ¹³C isotope ratios vary according to the production area and the vintage, it appears that internal ratios of ¹³C isotope ratios \(\left( {R_{^{13} C} } \right)\) of the four compounds studied can be considered as a constant. Thus, ratios of isotope ratios are found to be 1.00?±?0.04 and 1.02?±?0.08 for \(R_{^{13} C_{G/F} }\) and \(R_{^{13} C_{Gly/Eth} }\), respectively. Moreover, \(R_{^{13} C_{Eth/Sugar} }\) is found to be 1.15?±?0.10 and 1.16?±?0.08 for \(R_{^{13} C_{Gly/Sugar} }\). Additions of glucose, fructose and glycerol to a reference wine show a variation of the \(R_{^{13} C}\) value for a single product addition as low as 2.5 g/L^?1. Eighteen commercial wines and 17 concentrated musts have been analyzed. Three wine samples are suspicious as the \(R_{^{13} C}\) values are out of range indicating a sweetening treatment. Moreover, concentrated must analysis shows that ¹³C isotope ratio can be also used directly to determine the authenticity of the matrix.

Open image in new window

Figure HPLC-co-IRMS chromatogram of a diluted sweet wine.