Catalytic synthesis of <Emphasis Type="Italic">O</Emphasis>-aryl methyl(phenyl)phosphonochloridates

The reaction of methyl- and phenyldichlorophosphonates with phenols in the presence of anhydrous magnesium chloride (catalyst) or magnesium metal (procatalyst) has been used as a simple, efficient, and industrially feasible method for the synthesis of the corresponding O-aryl alkyl(aryl)phosphonochloridates.     

Highly stable organic monolayers for reacting silicon with further functionalities: the effect of the C-C bond nearest the silicon surface

Crystalline Si(111) surfaces have been alkylated in a two-step chlorination/alkylation process using various organic molecules having similar backbones but differing in their C-C bond closest to the silicon surface (i.e., C-C vs C=C vs C[triple bond]C bonds). X-ray photoelectron spectroscopic (XPS) data show that functionalization of silicon surfaces with propenyl magnesium bromide (CH3-CH=CH-MgBr) organic molecules gives nearly full coverage of the silicon atop sites, as on methyl- and propynyl-terminated silicon surfaces. Propenyl-terminated silicon surface shows less surface oxidation and is more robust against solvent attacks when compared to methyl- and propynyl-terminated silicon surfaces. We also show a secondary functionalization process of propenyl-terminated silicon surface with 4'-[3-Trifluoromethyl-3H-diazirin-3-yl]-benzoic acid N-hydroxysuccinimide ester [TDBA-OSu] cross-linker. The Si-CH=CH-CH3 surfaces thus offer a means of attaching a variety of chemical moieties to a silicon surface through a short linking group, enabling applications in molecular electronics, energy conversion, catalysis, and sensing.     

(R)-和(S)-石蚕蛾属于信息素的合成

以樟脑衍生物(-)-莰烷磺内酰胺为原料,经N-(E-2-烷烯酰基)莰烷-10,2-磺内酰胺与烷基格氏试剂的不对称Michael加成反应,LiAlH4还原断裂,3-甲基已醇的碘代反应及有机镉试剂与丙酰氯的偶联反应制得(R)-和(S)-石蚕蛾雄性性信息素6-甲基于-3-壬酮,其光学纯度达96%ee以上。     

Zur Analytik von Organozinnstabilisatoren

The quantitative determination of mono-, di-, tri- and tetraalkyl tin compounds in mixture by GLC is possible after alkylation to mixed tetraalkyl tins. The alkylation with methyl-, butyl- and octyl magnesium chloride runs quantitatively without any change in the original alkyl groups attached to the tin. The method can be applied not only for alkyl tin oxides and chlorides but also directly for alkyl tin thioglycolates. The by-products resulting from the thioglycolic acid ester cleavage are absorbed on silica gel prior to GLC and the tetraalkyl tins are eluted with n-pentane. Gas-chromatographic analysis is carried out alternatively with carbowax and polyglycol 20000 at temperatures between 100 and 230° C. The peak areas correspond to the weight percentage of tetraalkyl tin.     

Rapamycin-cyclodextrin complexation: improved solubility and dissolution rate

The objective of this study was to improve poor aqueous solubility and dissolution properties of anticancer drug rapamycin through formation of inclusion complexes with natural and modified cyclodextrins. Of the cyclodextrins tested, ??-cyclodextrin and hydroxypropyl-??-cyclodextrin did not complex with rapamycin. However, complexes of rapamycin with ??-cyclodextrin, methyl-??-cyclodextrin and hydroxypropyl-??-cyclodextrin were prepared and characterized by techniques such as Fourier Transform infrared spectroscopy, differential scanning calorimetry, phase solubility analysis and in vitro dissolution studies. According to the characterization data for the complexes, rapamycin water solubility was highly enhanced by all three ??-cyclodextrins with methyl-??-cyclodextrin complex resulting in particularly higher solubility enhancement. FTIR spectra and DSC thermograms supported the formation of inclusion complexes. The complexes showed highly improved dissolution rate in water. Complexation with cyclodextrin derivatives such as methyl-??-cyclodextrin and hydroxypropyl-??-cyclodextrin can provide promising alternatives for the formulation of rapamycin.     

2-(5-取代苯氧甲基-1,3,4-噻二唑-2-亚胺基)-5-(取代苯基亚甲基)-4- 噻唑啉酮的合成

以2-氨基-5-取代苯氧甲基-1,3,4-噻二唑(1)为起始原料, 合成了中间体2-氯乙酰氨基-5-取代苯氧甲基-1,3,4-噻二唑)-2-乙酰亚胺(2)和2-(5-取代苯氧甲基-1,3,4-噻二唑-2-亚胺基)-4-噻唑啉酮(3), 化合物3进一步与取代苯甲醛发生类Knoevenagle缩合反应, 得到了一系列2-(5-取代苯氧甲基-1,3,4-噻二唑-2-亚胺基)-5-(取代苯基亚甲基)-4-噻唑啉酮类化合物4a～4p. 目标化合物4a～4p的结构经IR, ¹H NMR和元素分析确证.     

Chromatographic study of four sesquiterpenoids in volatile oil of Curcumae Rhizoma on reverse phase stationary phase with methyl-β-cyclodextrin as mobile additive

Abstract

The elution behavior of four sesquiterpenoids in volatile oil of Curcumae Rhizoma on reverse-phase high-performance liquid chromatography with methyl-β-cyclodextrin as mobile phase additive was studied, including germacrone, curzerene, furanodiene, and β-elemene. Stoichiometric ratio and apparent formation constants of inclusion complex formed by methyl-β-cyclodextrin and each analyte were calculated by varying the concentration of the additive in the mobile phase composed of methanol and water (90:10, v/v), in which the association constant for inclusion complex formed by the organic modifier methanol and methyl-β-cyclodextrin was also determined. Results showed that the stoichiometric ratio of all the inclusion complex was 1:1 when 0–9?mmol L^?1 of methyl-β-cyclodextrin was added in the mobile phase. Unusual retention behavior of the analyte germacrone was found, which was further investigated by the calculation of thermodynamic parameters. Meanwhile, enthalpy and entropy of the inclusion complexes and solute-stationary phase interactions were determined by linear van’t Hoff plots.     

Indoprofen类似物的合成和表征

以邻硝基苯甲醛为超始原料，合成2-溴甲基-3-喹啉酸乙酯中间体，其分别与 苯胺、2-氯代苯胺、3-氯代苯胺、2-甲基苯胺和3-甲基苯胺发生Williamson反应， Williamson反应产物经闭环反应，得到新化合物2，3-二氢-1-氧代-2-苯基-1H-吡 咯并[3，4-b]喹啉（4a），2，3-二氢-1-氧代-2-（2-氯代苯基）-1H-吡咯并[3， 4-b]喹啉（4b），2，3-二氢-1-氧代-2-（3-氯代苯基）-1H-吡咯并[3,4-b]喹啉（ 4c），2，3-二氢-1-氧代-2-（2-甲基苯基）-1H-吡咯并[3，4-b]喹啉（4d）和2， 3-二氢-1-氧代-2-（3-甲基苯基）-1H-吡咯并[3，4-b]喹啉（4e）。12个新化合物 由元素分析、红外光谱、核磁共振氢谱、质谱予以证实。     

Formation of monoaldehydes by cerium(IV) ammonium nitrate oxidation of unsymmetric dimethylnaphthalenes

When 1,2-, 1,3-and 1,6-dimethylnaphthalene are oxidized by Ce⁴⁺ in acetic acid the corresponding monoaldehydes are formed in better than 80% yield. In each case aldehyde formation takes place with a high degree of selectivity as the methyl-1- to methyl-2-naphthaldehyde ratio is better than 11:1. The selectivity may be explained from differences in reactivity as calculated within the frontier orbital method.     

Enantioselective separation of some polyunsaturated epoxy fatty acids by high-performance liquid chromatography on a cellulose phenylcarbamate (Chiralcel OC) stationary phase.

cis-Epoxides of linoleic acid, alpha-linolenic acid, arachidonic acid and the omega 3-epoxide of eicosapentaenoic acid were chromatographed on a cellulose trisphenylcarbamate (Chiralcel OC) stationary phase in the normal-phase mode. The R,S and S,R enantiomers of methyl-14(15)epoxyeicosatrienoate, methyl-9(10)epoxyoctadecadienoate and methyl-9(10)epoxyoctadecenoate could be partly resolved. The R,S enantiomer of methyl-14(15)epoxyeicosatrienoate eluted before the S,R enantiomer. [14C]14(15)Epoxyeicosatrienoic acid was isolated from an incubation of [14C]20:4n-6 with microsomes of rabbit kidney cortex and the S,R enantiomer was found to predominate (about 2:1).     

The Synthesis of Methyl-(β-cyanoethyl)cyclosiloxanes

A series of methyl-( g -cyanoethyl) cyclotri-, tetra-, and pentasiloxanes has been prepared using oxygen-halogen exchange between silicon and tin in the reaction of f , y -dichloro(methyl- g -cyanoethyl)oligosiloxanes with bis-tri-n-butylstannyloxy-diorganosilanes.     

Synthesis pathway to carbohydrate-derived salicylidene hydrazides as ligands for oxovanadium complexes

Salicylidene hydrazides represent important ligands forming oxovanadium complexes. Carbohydrate-derived chiral salicylidene hydrazides as ligands for metal ion complexation were synthesized for the first time. The pathway of the mild and selective synthesis starts from commercial saccharides like methyl-α-d-glucopyranoside and methyl-α-d-mannopyranoside. All synthesized carbohydrate-derived salicylidene hydrazides are able to form oxovanadium complexes. The mononuclear structure proposed for the complex of 1,2,3,4-tetra-O-methyl-α-d-glucopyranuronic acid salicylidene hydrazide is consistent with the analytical data (NMR, IR and MS).     

Spectroscopy and dynamics of methyl-4-hydroxycinnamate: the influence of isotopic substitution and water complexation

High-resolution Resonance Enhanced MultiPhoton Ionization (REMPI) and Laser Induced Fluorescence (LIF) excitation spectra of jet-cooled methyl-4-hydroxycinnamate, methyl-4-OD-cinnamate, and of their water clusters have been recorded. Whereas water complexation leads to significant linewidth narrowing, isotopic substitution does for all practical purposes not influence the excited-state dynamics. In this light, we evaluate two previously proposed decay channels of the photoexcited ππ* state involving the dissociative πσ* state (analogous to phenol) and involving the optically dark nπ* state (as concluded for para-coumaric acid). To come to an unambiguous interpretation of the REMPI studies, it has been necessary to determine ionization thresholds. For methyl-4-hydroxycinnamate and its water cluster values of 8.078 and 7.636 eV have been found. Apart from the electronic excitation studies, IR absorption studies have been performed as well. These studies provide important vibrational markers for the assignment of the various conformations that are present under molecular beam conditions, and offer a direct measure of the influence of hydrogen bonding on the properties of the hydroxyl group.     

Analysis of organomercury compounds in sediments by capillary GC with atomic fluorescence detection

Analysis of methyl- and ethylmercury (MM and EM) halides in biological and environmental samples is generally performed by gas chromatography with electron capture detection. Tedious sample work-up protocols and poor chromatographic response (using packed columns) have, however, shown the need for the development of new methods in this field. This paper reports a sensitive method, free from these deficiencies, for the determination of methyl- and ethylmercury. The organomercury compounds (MM and EM) are first released from the sample matrix, by the combined action of acidic potassium bromide and cupric ions, and then extracted into dichloromethane. The initial extracts are subjected to thiosulfate clean-up and the organomercury species are isolated as their chloride derivatives by addition of cupric chloride, and subsequent extraction into a small volume of organic solvent. Capillary GC coupled with atomic fluorescence detection provided excellent separation efficiencies for methyl- and ethylmercury and proved to be a very selective and sensitive technique. The absolute detection limit for both MM and EM was found to be 0.2 pg.     

Determination of methyl- and ethylmercury in rat blood and tissue samples by capillary gas chromatography with electron-capture detection

A precise and accurate method has been developed for the determination of either methyl- or ethylmercury in the blood and tissue of rats using capillary gas chromatography with electron-capture detection. The biological sample was spiked with an internal standard (methyl- or ethylmercury chloride) and after treatment with sodium thiosulphate and cupric bromide the alkylmercurials were extracted into benzene as their bromide derivatives and analysed on an OV-275 glass capillary column. The sensitivity and selectivity of the method enabled determinations to be made on small volumes of blood and tissue homogenates. The method has been applied to a pharmacokinetic study in rats dosed orally with 8 mercury as methylmercury chloride or ethylmercury chloride.     

超临界二氧化碳中甲基-β-环糊精与聚丙二醇的包合

探索了超临界二氧化碳介质中甲基-β-环糊精和两种线型聚丙二醇间的穿合(threadinginclusion);并和相同温度下空气中的固态包合反应进行了比较。在无溶剂状态下,原处于无定形态的甲基-β-环糊精可与聚丙二醇链作用形成具有圆筒状结构的结晶态包合物,引入适量二氧化碳可明显增大包合反应的程度;将聚丙二醇链两端的羟基换为丙烯酸酯基可使反应进一步加强。     

Random thermotropic elastomers. I. Effects of substitution and hard/soft segment lengths on properties

Syntheses of segmented copoly(ether-ester)s with (oxy-2-methyl-1,4-phenyleneoxycarbonyl-1,4-phenylene carbonyl)/(oxy-2-chloro-1,4-phenyleneoxycarbonyl-1,4-phenylene carbonyl) (methyl-/chloro-substituted) hard segments and poly(oxytetramethylene) soft segments, are reported. The methodology consisted of staged addition melt condensation of terephthaloyl chloride, poly(oxytetramethylene)glycol (POTMG; \[ \bar M_n \] = 250, 650, 1000, 2000) and methyl-/chloro-hydroquinone. Lengths of hard and soft segments were varied while the weight ratio of hard to soft segment was maintained constant. Copolymers were characterised for solubility behavior, and by infrared spectroscopy, x-ray diffraction, DSC, and polarizing microscopy. Thermal properties were found to be dependent on length of soft segment as well as on the type of substituent in the mesogenic core. In both methyl- as well as chloro-substituted copoly(ether-ester)s soft segment glass transition temperature (T_gs) was obtained between ?40 and ?50°C. All copoly(ether-ester)s are elastomeric at room temperature (25°C). These polymers exhibit thermotropic liquid crystalline behavior and were easily sheared and aligned in liquid crystalline state. © 1994 John Wiley & Sons, Inc.     

Proton and carbon-13 NMR studies of methyl-(6-O-L-phenylalanyl)-α-D-glucoside and methyl-(6-O-D-phenylalanyl)-α-D-glucoside by 1H and 13C nmr showed that the LD compound is more flexible than DD and that DD probably assumes a folded conformation.

Study of methyl-(6-O-L-Phenylalanyl)-α-D-glucopyranoside and methyl-(6-O-D-phenylalanyl)-α-D-glucopyranoside by ¹H and ¹³C nmr showed that the LD compound is more flexible than DD and that DD probably assumes a folded conformation.     

LDPE protected by secondary amines of dehydroabietic methyl ester derivatives

The thermal degradation of low density polyethylene in the presence of several esters—methyl-12N-(phenyl)amino-14-amino-dehydroabietate (A 8), methyl-12N-(2-methoxyphenyl)amino-14-amino-dehydroabietate (A 9), methyl-12N-(4-methoxyphenyl)amino-14-amino-dehydroabietate (A 11) and methyl-12N-(phenyl)amino-14-nitro-dehydroabietate (A 12)—was investigated by chemiluminescence at three temperatures: 180, 200, and 220 °C. Kinetic parameters that depict the stability of polymers—temporal characteristics (oxidation induction times, half-period of oxidation and maximum oxidation time), oxidation rates and activation energies—were calculated from the dependencies of chemiluminescence intensity on thermal degradation time. The stabilization effectiveness of the compounds tested and other antioxidants, namely 4010 (amine compound) and Irganox 1010 and 1076 (hindered phenols), is presented for comparison. Experimental data have demonstrated that two members of the studied series, A 8 and A 11, are more efficient than good commercial hindered phenols.