Effect of the number of grooves on flow characteristics around a circular cylinder with triangular grooves

In the flow around a circular cylinder, a sudden decrease in the mean drag coefficient occurs at a high Reynolds number, but the same phenomenon occurs at a lower Reynolds number in the case where there exist grooves or roughness on the cylinder surface. In this paper, in order to make clear the flow characteristics around a cylinder with 20, 26 and 32 triangular grooves, the mean drag coefficient, pressure distribution, velocity distribution and turbulence intensity distribution were measured. Moreover, the flow around the cylinder was analyzed by applying the RNGk − ɛ turbulent model, and the surface flow pattern was investigated using the oil-film technique. From these results, it was found that a sudden decrease in the mean drag coefficient of a cylinder with 32 triangular grooves occurs at a lower Reynolds number compared with 20 and 26 triangular grooves.     

Numerical simulation of flow around a circular cylinder with curved sectional grooves

In a circular cylinder with uniform flow, a sudden decrease in the drag force occurs at a high Reynolds numbers; however, it is known that the same phenomenon occurs at a lower Reynolds number in the case where there exist grooves or roughness on the circular cylinder surface. To clarify the flow characteristics around a circular cylinder in the case of changing the shape of grooves we analyzed the drag coefficient, lift coefficient, turbulent kinetic energy, vorticity and pressure by applying the RNGk-ε turbulent model. The shapes of the grooves were arced, triangulated and curved. The results showed that the separation point for a circular cylinder with curved sectional grooves shifts to the most downstream side and the drag coefficient becomes the smallest among circular cylinders with grooves.     

Flow characteristics around a rotating grooved circular cylinder with grooved of different depths

The present paper describes the flow characteristics around a rotating grooved circular cylinder with grooves of different depths. The surface structure of a circular cylinder was varied by changing the depths of 32 arc grooves on the surface. The surface pressure on the cylinder is measured for theRe range of from 0.4×10⁵ to 1.8×10⁵ and for rotations of from 0 to 4500 rpm. The drag coefficient of a grooved cylinder increases as the spin rate ratio α (= rotational speed of the cylinder surface/uniform velocity) increases forRe>1.0×10⁵. As the groove depth increases, the drag coefficient of a grooved cylinder is independent from the spin rate ratio α. The direction of the lift force of a smooth cylinder is opposite to the Magnus force forRe>1.0×10⁵. However, the direction of the lift force of a grooved cylinder is the same as that of the Magnus force for allRe>1.0×10⁵. As the groove depth increases, the increase in the slope of the lift coefficient becomes small. These phenomena are related to the positions of the flow separation points, which are clarified from the pressure distribution and flow visualization by the spark tracing method. In addition, in the present study, the flow around a rotating grooved cylinder is clarified by flow visualization.     

Effect of shroud geometry on the pressure distributed around a circular cylinder

Some results are presented of an investigation of the distribution of the mean static pressure around a circular cylinder fitted with various shrouds, for the subcritical and transition Reynolds number range. Those shrouds were chosen which suppress flow-induced vibrations and these seem to have a particular effect on the pressure distribution: namely, the flat part of the corresponding pressure coefficient curve versus the circumferential angle is reduced behind the cylinder.     

电磁力控制湍流边界层分离圆柱绕流场特性数值分析

在亚临界区高雷诺数Re=1.4×105下,采用脱体涡模拟结合湍流分离的方法对弱电解质中电磁力作用下湍流边界层分离圆柱绕流场及其升(阻)力特性进行了数值模拟和分析.结果表明,电磁力可以提高圆柱体湍流边界层内的流体动能,延缓圆柱体湍流边界层的流动分离,减弱圆柱体湍流绕流场中在流向和展向上大尺度漩涡的强度,减小圆柱体阻力时均值及其升力脉动幅值.当电磁力作用参数大于某个临界值后,湍流边界层流动分离消失,在圆柱体尾部产生射流现象,从而电磁力对圆柱体产生净推力作用,出现负阻力现象,而且升力脉动幅值接近于零,出现圆柱体升力消失现象.     

Numerical investigation of incompressible fluid flow and heat transfer around a rotating circular cylinder

The heat transfer and air flow around an unconfined heated rotating circular cylinder is investigated numerically for varying rotation rates (α = 0–6) in the Reynolds number range of 20–200. The numerical calculations are carried out by using a finite volume method based commercial computational fluid dynamics solver FLUENT. The successive changes in the flow pattern are studied as a function of the rotation rate. Suppression of vortex shedding occurs as the rotation rate increases (α > 2). A second kind of instability appears for higher rotation speed where a series of counter-clockwise vortices is shed in the upper shear layer. The rotation attenuates the secondary instability and increases the critical Reynolds number for the appearance of this instability. Besides, time-averaged (lift and drag coefficients and Nusselt number) results are obtained and compared with the literature data. A good agreement has been obtained for both the local and averaged values.     

圆柱绕流辐射声场的数值研究

本文从ψ-ω形式的不可压N-S方程出发,采用ADI-BGE格式及新的物面边界条件处理方法,并提出一种数值扰动模型,成功地计算了R_e=100时圆柱绕流卡门涡街流动,得到的流场结果比原有数值解准确,与实验结果符合良好,因而可用来进行声场数值研究。在声场计算方面,直接积分Curle方程,对R_e=100时的声源分布及其声辐射特性进行数值分析,并与涡声理论结果和流场中脉动力和脱体旋涡频谱进行比较,证明本文方法是成功的。     

Dominant mode characteristics of circular groove guide

Circular groove guide is a kind of waveguide for millimeter waves with low loss, large dimensions, and low dispersion. In this paper, the dominant mode characteristics of it is analysed. The technique that mode macthing method combines with point matching method is used to derive the Nth-order characteristic equation of the guide. The 1st order, 2nd order and 3rd order approximate curves that the normalized cutoff wavelength of circular groove guide varies with c/a are given. The attenuation curves are given at 1mm, 1.5mm and 3mm wavelength. The numerical results are in well agreement with the experimental results published.Supported by National Science Foundation of P. R. China     

Flow characteristics around a square cylinder with changing chamfer dimensions

Abstract  

It is known that for a square cylinder subjected to uniform flow, the drag force changes with the angle of attack. To clarify the flow characteristics around a square cylinder with corner cutoffs, we measured the drag coefficient and the Strouhal number for changing chamfer dimensions. We analyzed the flow around a square cylinder with corner cutoffs by applying the RNG k–ε turbulent model, and investigated the surface flow pattern using visualization by means of the oil film and mist flow method. From these results, we obtained the surface flow patterns by the oil film method and numerical analysis. The numerical results agreed well with the experimental values. The drag coefficient of the square cylinder with corner cutoffs decreased suddenly at an angle of attack of about α = 0°– 10° when compared with the drag coefficient for a square cylinder. The minimum value of the drag coefficient for the square cylinder with corner cutoffs decreased by about 30% compared with that for the square cylinder. The drag coefficient of the square cylinder with 10% corner cutoffs was found to be smallest, since the wake area of this square cylinder was smaller compared with that of the other square cylinder.     

雷诺数对圆柱尾流中被动标量场的影响

本文通过实验研究雷诺数对加热圆柱尾流中温度场的影响.实验中雷诺数Re(≡U∞d/v,其中U∞为来流速度、d为圆柱直径、v为流体黏度)的取值范围为1200-8600.实验中温度是由直径为0.63 μm的冷线探针测量的.实验结果表明,一般而言,雷诺数对整个尾流的标量混合特性有着显著的影响.随着雷诺数的增加,平均标量场向外的扩散速度加快、标量脉动强度增加了但衰减也加快.本文还发现:尾流中似乎存在两个区域,一个位于卡门涡街下游靠后,另一个就是传统的远场自相似区;在这两个区域,某些描述标量和动量的相似关系式近似成立.     

Lattice—BGK simulation of a two—dimensional channel flow around a square cylinder

The confined flow around a square cylinder mounted inside a two-dimensional channel (blockage ratio $\be=1/8$) was investigated in detail by a newly developed incompressible nonuniform lattice-BGK model. It is found that the vortex shedding behind the cylinder induces periodicity in the flow field, and the periodicity of the flow will lose for $Re>$300. A detailed analysis for a range of Reynolds numbers between 1 and 500 was presented. Quantitative comparisons with other methods show that the model gives accurate results for complex flows.     

Investigation of turbulent flow past a flagged short finite circular cylinder

This study was conducted to investigate the flow structures of turbulent flow passing over a short finite cylinder in which a rigid flag is attached to the rear of the cylinder, in wake region. The length-to-diameter ratio of the cylinder was chosen to be L/D = 2, whereas the rigid flag had a width-to-diameter ratio of W/D = 1.5. Wall-adapted large-eddy simulation (LES-WALE) was used to resolve unsteady turbulent flow structures. The far field Reynolds number based on cylinder diameter was chosen to be 20,000. The results were compared with the regular case wherein no flag was attached to the cylinder. Results revealed that the flow pattern behind the cylinder with flag was totally different in comparison with the regular case one. However, top free end of the cylinder was not influenced by the flag in contrast with the wake region. At far downstream from the cylinder, most of the flow structures in both cases appeared the same. The horseshoe vortices in both cases appeared to be an unsteady phenomenon, with slightly different patterns. Moreover, in the case of flag attachment, the pressure coefficient was smaller than that of with no flag. Finally, it was shown that the main and secondary Strouhal numbers locations were different in both cases.     

Yield drag in a two-dimensional foam flow around a circular obstacle: Effect of liquid fraction

We study the two-dimensional flow of foams around a circular obstacle within a long channel. In experiments, we confine the foam between liquid and glass surfaces. In simulations, we use a deterministic software, the Surface Evolver, for bubble details and a stochastic one, the extended Potts model, for statistics. We adopt a coherent definition of liquid fraction for all studied systems. We vary it in both experiments and simulations, and determine the yield drag of the foam, that is, the force exerted on the obstacle by the foam flowing at very low velocity. We find that the yield drag is linear over a large range of the ratio of obstacle to bubble size, and is independent of the channel width over a large range. Decreasing the liquid fraction, however, strongly increases the yield drag; we discuss and interpret this dependence.