Stimuli-responsive surfaces using polyampholyte polymer brushes prepared via atom transfer radical polymerization

The synthesis of AB diblock copolymer polyampholyte polymer brushes of the type Si/SiO2//poly(acrylic acid-b-vinyl pyridine) prepared using atom transfer radical polymerization is reported. Both 2- and 4-vinyl pyridine have been used. The diblock polyampholyte polymer brushes demonstrate stimuli-responsive behavior with respect to pH, showing both polyelectrolyte and polyampholyte effects. Furthermore, we have quaternized the 4-vinyl pyridine segments to form a mixed weak/strong, or annealed/quenched, polyelectrolyte system. The quaternized polymer brush exhibits different pH-responsive behavior, with decreasing film thickness being observed with increasing pH.     

Stimuli-responsive polyelectrolyte block copolymer brushes synthesized from the Si wafer via atom-transfer radical polymerization

Surface-tethered oppositely charged weak polyelectrolyte block copolymer brushes composed of poly(2-vinyl pyridine) (P2VP) and poly(acrylic acid) (PAA) were grown from the Si wafer by atom-transfer radical polymerization. The P2VP-b-PAA brushes were prepared through hydrolysis of the second PtBA block to the corresponding acrylic acid. The P2VP-b-PAA brushes with different PAA block length were obtained. The P2VP-b-PAA brushes revealed a unique reversible wetting behavior with pH. The difference between the solubility parameters for P2VP and PAA, the changes of surface chemical composition and surface roughness, and the reversible wetting behavior illustrated that the surface rearrangement occurred during treatment of the P2VP-b-PAA brushes by aqueous solution with different pH value. The reversible properties of the P2VP-b-PAA brushes can be used to regulate the adsorption of the sulfonated PS nanoparticles.     

Selective Adsorption of Functionalized Nanoparticles to Patterned Polymer Brush Surfaces and Its Probing with an Optical Trap

The site‐specific attachment of nanoparticles is of interest for biomaterials or biosensor applications. Polymer brushes can be used to regulate this adsorption, so the conditions for selective adsorption of phosphonate‐functionalized nanoparticles onto micropatterned polymer brushes with different functional groups are optimized. By choosing the strong polyelectrolytes poly(3‐sulfopropyl methacrylate), poly(sulfobetaine methacrylate), and poly[2‐(methacryloyloxy)ethyl trimethylammonium chloride], it is possible to direct the adsorption of nanoparticles to specific regions of the patterned substrates. A pH‐dependent adsorption can be achieved by using the polycarboxylate brush poly(methacrylic acid) (PMAA) as substrate coating. On PMAA brushes, the nanoparticles switch from attachment to the brush regions to attachment to the grooves of a patterned substrate on changing the pH from 3 to 7. In this manner, patterned substrates are realized that assemble nanoparticles in pattern grooves, in polymer brush areas, or substrates that resist the deposition of the nanoparticles. The nanoparticle deposition can be directed in a pH‐dependent manner on a weak polyelectrolyte, or is solely charge‐dependent on strong polyelectrolytes. These results are correlated with surface potential measurements and show that an optical trap is a versatile method to directly probe interactions between nanoparticles and polymer brushes. A model for these interactions is proposed based on the optical trap measurements.     

Analysis of spherical polyelectrolyte brushes by small angle X-ray scattering

Spherical polyelectrolyte brushes （SPBs） with PS core and poly（acrylic acid） （PAA） brushes were prepared and analyzed by SAXS in this article. A radial electron density profile of SPB was brought up, which fits well with the SAXS result and shows a core-shell structure. The effect of pH on SPB form was represented by SAXS and it proves that the chains of SPB will stretch in response to increased pH owning to the increased electrostatic repulsion. SPBs immobilized with magnetic nanoparticles or bovine serum albumin （BSA） were prepared and analyzed by SAXS as well. SAXS could characterize the changes of electron density inside brushes of SPBs due to the immobilization of magnetic nanoparticles or BSA. This provides significant supports for further application of immobilized metal nanoparticles or proteins.     

Ionizable polyelectrolyte brushes: brush height and electrosteric interaction

Semi-analytical scaling theory is used to describe quenched and annealed (weakly charged, ionizable, charge-regulating) polyelectrolyte brushes in electrolyte solutions of arbitrary salt concentration. An Alexander-De Gennes box model with homogeneous distribution of polymer segments and the free ends located at the edge of the brush is assumed, as is local electroneutrality in the brush. For annealed polyelectrolyte and in the low-salt regime, the theory predicts that for sufficiently dense brushes, the salt concentration has a small influence on brush height, while the brush expands with increasing grafting density, in agreement with experiment. Expressions are presented for the interaction free energy of compressed ionizable and quenched polyelectrolyte brushes (proportional to the force between particles or curved surfaces). In all cases, the required prefactors are explicitly stated. The theory is compared directly with published experiments on the influence of salt concentration, pH, and grafting density on the thickness and interaction force of polystyrene sulfonate (quenched) and poly(meth)acrylic acid (annealed) brushes. In general, trends are well reproduced but significant deviations remain.     

Synthesis of thermo- and pH-sensitive polyelectrolyte brushes by combining thermo-controlled emulsion polymerization and photo-emulsion polymerization

Bifunctional spherical polyelectrolyte brushes(SPBs)with tunable thermo-and pH-sensitivity are synthesized by combining thermo-controlled emulsion polymerization and photo-emulsion polymerization.They consist of a spherical polystyrene core and a shell of mixed brushes of poly(N-isopropylacrylamide)(PNIPAM)and poly(acrylic acid)(PAA) whose composition can be easily modulated by the dose of monomers.The kinetics of SPB synthesis as well as their size change with temperature and pH is determined by dynamic light scattering(DLS).The scanning electron microscopy(SEM) images show that the bifunctional SPBs have a defined spherical morphology with a narrow size distribution.     

Synthesis and swelling behavior of pH-responsive polybase brushes

We synthesize polybase brushes and investigate their swelling behavior. Poly(2-(dimethylamino)ethyl methacrylate)) (PDMAEMA) brushes are prepared by the "grafting from" method using surface-initiated Atom Transfer Radical Polymerization to obtain dense brushes with relatively monodisperse chains (PDI = 1.35). In situ quaternization reaction can be performed to obtain poly(2-(trimethylamino)ethyl methacrylate)) (PTMAEMA) brushes. We determine the swollen thickness of the brushes using ellipsometry and neutron reflectivity techniques. Brushes are submitted to different solvent conditions to be investigated as neutral brushes and weak and strong polyelectrolyte brushes. The swelling of the brushes is systematically compared to scaling models. It should be pointed out that the scaling analysis of different types of brushes (neutral polymer and weak and strong polyelectrolyte brushes) is performed with identical samples. The scaling behavior of the PDMAEMA brush in methanol and the PTMAEMA brush in water is in good agreement with the predicted scaling laws for a neutral polymer brush in a good solvent and a polyelectrolyte brush in the osmotic regime. The salt-induced contraction of the quaternized brush is observed for high salt concentration, in agreement with the predicted transition between the regimes of the osmotic brush and the salted brush. From the crossover concentration, we calculate the effective charge ratio of the brush following the Manning counterion condensation. We also use PDMAEMA brushes as pH-responsive polybase brushes. The swelling behavior of the polybase brush is intermediate with respect to the behavior of the neutral polymer brush in a good solvent and the behavior of the quenched polyelectrolyte brush, as expected. The effective charge ratio of the PDMAEMA brush is determined as a function of pH using the scaling law of the polyelectrolyte brush in the osmotic regime.     

Ag Nanocomposite Particles: Preparation,Characterization and Application

Summary Herein, we report that different core-shell particles could be successfully used as the carrier systems for the deposition of silver nanoparticles. Firstly, thermosensitive core-shell microgel particles have been used as the carrier system for the deposition of Ag nanoparticles, in which the core consists of poly (styrene) (PS) whereas the shell consists of poly (N-isopropylacrylamide) (PNIPA) network cross-linked by N, N′-methylenebisacrylamide (BIS). Immersed in water the shell of these particles is swollen. Heating the suspension above 32 °C leads to a volume transition within the shell, which is followed by a marked shrinking of the network of the shell. Secondly, “nano-tree” type polymer brush can be used as “nanoreactor” for the generation of silver nanoparticles also. This kind of carrier particles consists of a solid core of PS onto which bottlebrush chains synthesized by the macromonomer poly (ethylene glycol) methacrylate (PEGMA) are affixed by “grafting from” technique. Thirdly, silver nanoparticles can be in-situ immobilized onto polystyrene (PS) core-polyacrylic acid (PAA) polyelectrolyte brush particles by UV irradiation. Monodisperse Ag nanoparticles with diameter of 8.5 nm, 7.5 nm and 3 nm can be deposited into thermosensitive microgels, “nano-tree” type polymer brushes and polyelectrolyte brush particles, respectively. Moreover, obtained silver nano-composites show different catalytic activity for the catalytic reduction of p-nitrophenol depending on the carrier system used for preparation.     

High catalytic activity of platinum nanoparticles immobilized on spherical polyelectrolyte brushes

We present a study on the catalytic activity of platinum nanoparticles immobilized on spherical polyelectrolyte brushes that act as carriers. The spherical polyelectrolyte brushes consist of a solid core of poly(styrene) onto which long chains of poly(2-methylpropenoyloxyethyl) trimethylammonium chloride are grafted. These positively charged chains form a dense layer of polyelectrolytes on the surface of the core particles ("spherical polyelectrolyte brush") that tightly binds divalent PtCl6-(2) ions. The reduction of these ions within the brush layer leads to nearly monodisperse nanoparticles of metallic platinum. The average size of the particles is approximately 2 nm. The composite particles exhibit excellent colloidal stability. The catalytic activity is investigated by photometrically monitoring the reduction of p-nitrophenol by an excess of NaBH4 in the presence of the nanoparticles. The kinetic data could be explained by the assumption of a pseudo-first-order reaction with regard to p-nitrophenol. In all cases, a delay time t0 has been observed, after which the reactions start. This time is shorter when the catalyst has already been used. All data demonstrate that spherical polyelectrolyte brushes present an ideal carrier system for metallic nanoparticles.     

Application of anomalous small‐angle X‐ray scattering to spherical polyelectrolyte brushes

The analysis of spherical polyelectrolyte brushes by anomalous small‐angle X‐ray scattering (ASAXS) is considered. The particles under consideration consist of a solid poly(styrene) core onto which chains of poly(acrylic acid) are grafted. If Rubidium ions are chosen as counterions, ASAXS can be applied to the study of these systems because the absorption edge of Rb (15199.6eV) can be reached by synchrotron radiation. Here we discuss the results to be obtained by the application of ASAXS to spherical polyelectrolyte brushes.     

Synthesis of dense poly(acrylic acid) brushes and their interaction with amine-functional silsesquioxane nanoparticles

Poly(acrylic acid) polyelectrolyte brushes were synthesized by surface-initiated atom transfer radical polymerization (SI-ATRP) of tert-butyl acrylate on planar gold surfaces and subsequent hydrolysis. Three types of monolayers with different numbers of thiol binding sites per initiating unit were used. The binding strength to the gold surface turned out to be of crucial importance for the formation of uniform brush layers after acidic hydrolysis. The monolayers and polymer brushes were characterized by ellipsometry, infrared spectroscopy, water contact angle measurements, atomic force microscopy, and X-ray photoelectron spectroscopy. Their interaction with [(diglycidylamino)propyl]silsesquioxane nanoparticles at various pH values was studied by surface plasmon resonance.     

Spherical Polyelectrolyte Brushes as Carriers for Catalytically Active Metal Nanoparticles

Summary: We present a study on the catalytic activity of metal nanoparticles immobilized on spherical polyelectrolyte brushes that act as carriers. The spherical polyelectrolyte brushes consist of a solid core of poly(styrene) onto which long chains of poly(2-methylpropenoyloxyethyl) trimethylammonium chloride are grafted. These positively charged chains form a dense layer of polyelectrolytes on the surface of the core particles (“spherical polyelectrolyte brush”) that tightly binds divalent metal ions, such as AuCl, PdCl or PtCl. The reduction of these ions within the brush layer leads to nearly monodisperse metal nanoparticles. Gold, platinum and palladium nanoparticles with diameters of around 1.25 nm, 2.1 nm and 2.4 nm have been embedded into polyelectrolyte brushes, respectively. The composite particles exhibit excellent colloidal stability. The catalytic activity is investigated by photometrically monitoring the reduction of p-nitrophenol by an excess of NaBH₄ in the presence of the nanoparticles. The kinetic data could be explained by the assumption of a pseudo-first-order reaction with regard to p-nitrophenol. All data demonstrate that spherical polyelectrolyte brushes present an ideal carrier system for metallic nanoparticles.     

Pervaporation and properties of chitosan-poly(acrylic acid) complex membranes

Polyelectrolyte complex membranes between chitosan as a cationic polyelectrolyte and poly(acrylic acid) as an anionic species were prepared by blending two polymer solutions in different ratio. Characterization of chitosan-poly(acrylic acid) complex membrane was investigated by Fourier transform-infrared (FT-IR), wide angle X-ray diffractometer, dielectric analyzer. Their mechanical properties were studied by universal testing machine. The swelling of polyelectrolyte membranes was studied. Thermal properties of polyelectrolyte membranes from chitosan and poly(acrylic acid) by varying blend ratios showed a shift in transition temperatures of polyelectrolyte complexes. Polyelectrolyte complex membranes from chitosan and poly(acrylic acid) had pH sensitive characteristics as determined by FT-IR studies and swelling behaviors. Pervaporation performances were investigated with various organic mixtures; water-ethanol, water-isopropanol, methanol-methyl t-butyl ether mixtures. An increase of poly(acrylic acid) content in the polyelectrolyte complex membranes affected the swelling behavior and pervaporation performance of water-ethanol mixture. Permeation flux decreased and the water concentration in the permeate was close to 100% upon increasing the feed alcohol concentration.     

The preparation of poly(N-acetyl-α-amino acrylic acid) [poly(N-acetyl dehydroalanine)] and poly(α-amino acrylic acid) (polydehydroalanine)

Poly(N-acetyl-α-amino acrylic acid) was prepared by a free radical polymerization reaction. Mild alkaline hydrolysis of the polymer product yielded a second polymer poly(α-amino acrylic acid) (polydehydroalanine). Both polymers exhibited certain polyelectrolyte behavior, although the latter did not behave as expected for an amphoteric polyelectrolyte.     

Fuzzy ternary particle systems by surface-initiated atom transfer radical polymerization from layer-by-layer colloidal core-shell macroinitiator particles

We report the synthesis of ternary polymer particle material systems composed of (a) a spherical colloidal particle core, coated with (b) a polyelectrolyte intermediate shell, and followed by (c) a grafted polymer brush prepared by surface-initiated polymerization as the outer shell. The layer-by-layer (LbL) deposition process was utilized to create a functional intermediate shell of poly(diallyl-dimethylammonium chloride)/poly(acrylic acid) multilayers on the colloid template with the final layer containing an atom transfer radical polymerization (ATRP) macroinitiator polyelectrolyte. The intermediate core-shell architecture was analyzed with FT-IR, electrophoretic mobililty (zeta-potential) measurements, atomic force microscopy, and transmission electron microscopy (TEM) techniques. The particles were then utilized as macroinitiators for the surface-initiated ATRP grafting process for poly(methyl methacrylate) polymer brush. The polymer grafting was confirmed with thermo gravimetric analysis, FT-IR, and TEM. The polymer brush formed the outermost shell for a ternary colloidal particle system. By combining the LbL and surface-initiated ATRP methods to produce controllable multidomain core-shell architectures, interesting functional properties should be obtainable based on independent polyelectrolyte and polymer brush behavior.     

Surface friction of hydrogels with well-defined polyelectrolyte brushes

Hydrogels of poly(2-hydroxyethyl methacrylate) (PHEMA) with well-defined polyelectrolyte brushes of poly(sodium 4-styrenesulfonate) (PNaSS) of various molecular weights were synthesized, keeping the distance between the polymer brushes constant at ca. 20 nm. The effect of polyelectrolyte brush length on the sliding friction against a glass plate, an electrorepulsive solid substrate, was investigated in water in a velocity range of 7.5 x 10(-5) to 7.5 x 10(-2) m/s. It is found that the presence of polymer brush can dramatically reduce the friction when the polymer brushes are short. With an increase in the length of the polymer brush, this drag reduction effect only works at a low sliding velocity, and the gel with long polymer brushes even shows a higher friction than that of a normal network gel at a high sliding velocity. The strong polymer length and sliding velocity dependence indicate a dynamic mechanism of the polymer brush effect.     

Patterned polyelectrolyte multilayer: surface modification for enhancing selective adsorption

This paper describes the use of surface chemical modification to enhance the difference of the surface charge on a patterned polyelectrolyte multilayer, which can be used for selectively adsorbing functional materials. We fabricated a patterned multilayer by combining the layer-by-layer self-assembly technique and photolithography and taking advantage of the different solubility of polyelectrolyte multilayers of diazo resins (DAR)/poly(acrylic acid) before and after UV irradiation. This patterned surface can be used as a matrix for selective adsorption of small molecular dyes, such as Methylene Blue. However the difference in surface charge on the patterned surface was not enough when we used it to selectively adsorb polystyrene (PS) nanoparticles using electrostatic force as the driving force. Therefore, we modified the patterned surface by interfacial chemistry. After modification, the patterned polyelectrolyte multilayer can be used as a good matrix for selective adsorption of PS nanoparticles with both positive and negative charges.     

Preparation of end-grafted polymer brushes by nitroxide-mediated free radical polymerization of vaporized vinyl monomers

In this work, we report a gas-phase polymerization approach to create end-grafted vinyl based polymer films on silicon oxide based substrates. The "surface-initiated vapor deposition polymerization" (SI-VDP) of vaporized vinyl monomers, via the nitroxide-mediated free radical polymerization mechanism, was developed to fabricate various homo- and block copolymer brushes from surface-bound initiators, 1-(4'-oxa-2'-phenyl-12'-trimethoxysilyldodecyloxy)-2,2,6,6-tetra-methylpiperidine ("TEMPO"). The resulting polymer thin films were characterized by the Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, ellipsometry, and contact angle goniometry, respectively, to identify the surface composition, film thickness, surface coverage, and water contact angles. Through the SI-VDP, end-grafted polymer films of polystyrene (PSt), poly(acrylic acid) (PAAc), poly(N-(2-hydroxypropyl) methacrylamide) (PHPMA), and poly(N-isopropylacrylamide) (PNIPAAm) with 10-200 nm thicknesses were fabricated. Furthermore, the block copolymer films of PAAc (1st block)-b-PSt (2nd block), PSt (1st block)-b-PAAc (2nd block), and a triblock copolymer film of PAAc (1st)-b-PSt (2nd)-b-PHPMA (3rd), were also fabricated, suggesting the "renewability" of the TEMPO-initiated polymerization in the SI-VDP scheme. It is also noticed that the SI-VDP is more efficient than the conventional solution phase polymerization in producing functional polymer brushes such as PNIPAAm, PAAc, or PAAc-b-PSt end-grafted films. In summary, our studies have shown clear advantages of the SI-VDP setup for the nitroxide-mediated polymerization scheme in controlling synthesis of end-grafted homo- and copolymer thin films.     

Completely aqueous procedure for the growth of polymer brushes on polymeric substrates

The growth of polymer brushes on polymer substrates is often challenging because of substrate incompatibility with the organic solvents used for initiator attachment. This letter reports the use of layer-by-layer adsorption of macroinitiators and subsequent aqueous ATRP from these immobilized initiators to prepare polymer brushes on polymeric substrates. Polyethersulfone (PES) films and porous membranes were modified with polyelectrolyte multilayer films, and a previously developed polycationic initiator, poly(2-(trimethylammonium iodide)ethyl methacrylate-co-2-(2-bromoisobutyryloxy)ethyl acrylate), was then electrostatically adsorbed onto these polyelectrolyte films. The immobilized macroinitiator is very efficient in initiating the growth of polymer brushes on PES, as demonstrated by aqueous syntheses of poly(2-hydroxyethyl methacrylate) (PHEMA) and poly(2-(dimethylamino)ethyl methacrylate) (PDMAEMA) films. PHEMA (250 nm thick) and PDMAEMA (40 nm thick) brushes were grown in 2 h from surfaces modified with polycationic initiators. Moreover, this procedure is effective for growing brushes in the pores of PES membranes.