Evaluation of the toxicity of ZnO nanoparticles to Chlorella vulgaris by use of the chiral perturbation approach

The toxicity of ZnO nanoparticles (NPs) has been widely investigated because of their extensive use in consumer products. The mechanism of the toxicity of ZnO NPs to algae is unclear, however, and it is difficult to differentiate between particle-induced toxicity and the effect of dissolved Zn²⁺. In the work discussed in this paper we investigated particle-induced toxicity and the effects of dissolved Zn²⁺ by using the chiral perturbation approach with dichlorprop (DCPP) as chiral perturbation factor. The results indicated that intracellular zinc is important in the toxicity of ZnO NPs, and that ZnO NPs cause oxidative damage. According to dose–response curves for DCPP and the combination of ZnO NPs with (R)-DCPP or (S)-DCPP, the toxicity of DCPP was too low to perturb the toxicity of ZnO NPs, so DCPP was suitable for use as chiral perturbation factor. The different glutathione (GSH) content of algal cells exposed to (R)-DCPP or (S)-DCPP correlated well with different production of reactive oxygen species (ROS) after exposure to the two enantiomers. Treatment of algae with ZnO NPs and (R)-DCPP resulted in reduced levels of GSH and the glutathione/oxidized glutathione (GSH/GSSG) ratio in the cells compared with the control. Treatment of algae with ZnO NPs and (S)-DCPP, however, resulted in no significant changes in GSH and GSH/GSSG. Moreover, trends of variation of GSH and GSH/GSSG were different when algae were treated with ZnSO₄·7H₂O and the two enantiomers. Overall, the chiral perturbation approach revealed that NPs aggravated generation of ROS and that released Zn²⁺ and NPs both contribute to the toxicity of ZnO NPs.

The fabrication of TiO<Subscript>2</Subscript> nanoparticle/ZnO nanowire arrays bi-filmed photoanode and their effect on dye-sensitized solar cells

Porous TiO₂ nanoparticles coated on ZnO nanowire arrays (TiO₂ NP/ZnO NW) as photoanode for dye-sensitized solar cell (DSSC) has been fabricated and investigated to improve the power conversion efficiency. The TiO₂ NP/ZnO NW photoanode consists of single crystalline ZnO NWs synthesized via hydrothermal method and porous TiO₂ NP film covered on the surface of ZnO NW arrays by screen printing technique. The effect of TiO₂ NPs thickness of the bi-filmed photoanode on the cell performance has been investigated, and TiO₂ NP/ZnO NW DSSC with NP thickness of ~5 μm exhibits the best efficiency of 4.68%, higher than 1.16% of ZnO NW DSSC and 3.18% of TiO₂ NPs DSSC, prepared and tested under identical conditions. The efficiency increase is attributed to the enlarged photocurrent, due to the greatly enhanced surface area for dye absorption and light harvesting efficiency resulted from TiO₂ NPs, and improved open-circuit voltage, due to reduced electron recombination by providing direct conduction pathway along ZnO NWs.     

PREPARATION OF CLOUDY COCONUT OIL EMULSIONS CONTAINING DISPERSED Ti02 USING ATOMIZER

Food Grade Rutile TiO₂ was dispersed in coconut oil with the help of hydrophobic emulsifiers such as sorbitan esters and lecithin. The dispersed mixture was melted and blended with hydrophilic emulsifiers such as ethoxylated sorbitan esters and the preheated (60°C) blend was further sprayed by atomizer into cold water (20°C). The oil-in-water emulsions contained encapsulated TiO₂ in the internal phase. The technique is simple and allows preparation of stable emulsions with average droplet size of 1-10 microns.     

Physico-Chemical Properties of Inorganic NPs Influence the Absorption Rate of Aquatic Mosses Reducing Cytotoxicity on Intestinal Epithelial Barrier Model

Noble metals nanoparticles (NPs) and metal oxide NPs are widely used in different fields of application and commercial products, exposing living organisms to their potential adverse effects. Recent evidences suggest their presence in the aquifers water and consequently in drinking water. In this work, we have carefully synthesized four types of NPs, namely, silver and gold NPs (Ag NPs and Au NPs) and silica and titanium dioxide NPs (SiO₂ NPs and TiO₂ NPs) having a similar size and negatively charged surfaces. The synthesis of Ag NPs and Au NPs was carried out by colloidal route using silver nitrate (AgNO₃) and tetrachloroauric (III) acid (HAuCl₄) while SiO₂ NPs and TiO₂ NPs were achieved by ternary microemulsion and sol-gel routes, respectively. Once the characterization of NPs was carried out in order to assess their physico-chemical properties, their impact on living cells was studied. We used the human colorectal adenocarcinoma cells (Caco-2), known as the best representative intestinal epithelial barrier model to understand the effects triggered by NPs through ingestion. Then, we moved to explore how water contamination caused by NPs can be lowered by the ability of three species of aquatic moss, namely, Leptodictyum riparium, Vesicularia ferriei, and Taxiphyllum barbieri, to absorb them. The experiments were conducted using two concentrations of NPs (100 μM and 500 Μm as metal content) and two time points (24 h and 48 h), showing a capture rate dependent on the moss species and NPs type. Then, the selected moss species, able to actively capture NPs, appear as a powerful tool capable to purify water from nanostructured materials, and then, to reduce the toxicity associated to the ingestion of contaminated drinking water.     

Biosynthesis of TiO<Subscript>2</Subscript> nanoparticles using <Emphasis Type="Italic">Justicia gendarussa</Emphasis> leaves for photocatalytic and toxicity studies

Eco-friendly biosynthesis of polycrystalline titanium dioxide (TiO₂) nanoparticles (NPs) was synthesised using Justicia gendarussa (J. gendarussa) leaf extract as oxidizing agents. They were compared with TiO₂ NPs synthesized using the glacial acetic acid and also studied was the combined effect of synthesis of TiO₂ NPs. The crystalline nature and structural formation of TiO₂ NPs synthesized by different methods were confirmed by the X-ray diffraction technique, and functional groups of materials were confirmed by FT-IR spectroscopy. The synthesized materials were investigated for photocatalytic activity for methylene blue under UV irradiation and toxicity activity against MCF-7 and MDA-MB-231 cells. The result indicates that TiO₂ NPs synthesised by J. gendarussa showed superior and enhanced activity against MCF-7 and MDA-MB-231. Biosynthesized TiO₂ NPs showed higher photodegradation of dyes when compared with other TiO₂ NPs synthesized by different methods. This is due to the alterations in band gap; structural changes and surface area in nanoparticles that increased the activity. Also, nanosphere/disc like morphology of TiO₂ NPs is confirmed using TEM.     

Improved performance of dye sensitized ZnO nanorod solar cells prepared using TiO2 seed layer

Zinc oxide (ZnO) nanorods of different structures have been grown on indium-doped tin oxide substrates by using TiO₂ as seed layer. The ZnO nanorods have been prepared using TiO₂ seed layers annealed at different temperatures via a simple sol–gel method. The X-ray diffraction result indicates that the prepared samples are of wurtzite structure. Dye sensitized solar cells have been fabricated using the prepared ZnO nanorods. The open circuit voltage, short circuit current density, fill factor, and power conversion efficiency of the ZnO nanorod based dye sensitized solar cells prepared using TiO₂ seed layers annealed at different temperatures have been determined. The improvement in power conversion efficiency may be due to the flower like structured ZnO nanorods with smaller diameter and large specific surface area which paves way for the efficient electron transfer in hybrid solar cells.     

Biomedical application and hidden toxicity of Zinc oxide nanoparticles

Zinc oxide nanoparticles (ZnO NPs) represent a novel type of metal oxide nanoparticles enabling a new horizon for biomedical applications spanning from diagnosis to treatment. ZnO NPs are extensively used in commercial products such as sunscreens and daily-care products. Apart from that, ZnO NPs are used in food packaging and ointments and as an antimicrobial and antifungal agent. They are extensively used for many biomedical applications noticeably in pharmaceutics and theranostics. Its exceptional optical, electrical, and physiochemical properties, notably its incredible surface chemistry, make ZnO NPs a reliable option for bioimaging, biosensors, antimicrobial action, and drug and gene delivery. The present review covers findings and developments in ZnO NPs research in relation to its application and toxicity mechanism. A special emphasis has been given to the neurotoxic potential of the ZnO NPs and glial cell toxicity. Various factors contributing to the toxic potential of ZnO NPs and cell signaling pathways concerning its toxicity are also discussed. Available data point toward the risk of uncontrollable use of zinc nanoformulation. With increasing use, ZnO NPs pose a severe threat both to the ecosystem and human beings. In a nutshell, the review outlines the current state of the art of ZnO NPs.     

Cytotoxic performance of green synthesized Ag and Mg dual doped ZnO NPs using Salvadora persica extract against MDA-MB-231 and MCF-10 cells

In this study, dual doped Zinc oxide nanoparticles consisted of silver and magnesium were prepared by Salvadora persica extract. Powder X-ray diffraction (PXRD) analysis displayed the formation of wurtzite ZnO phase nanostructures and dual doped nanoparticles. The morphological observations of scanning electron microscopy (SEM) confirmed the hexagonal morphology of prepared nanoparticles. The Raman scattering of this product exhibited the first and second orders of polar and non-polar modes that are the characteristic bonds of a wurtzite structure. The toxicity effects of synthesized un-doped, as well as Ag and Mg dual doped ZnO NPs on breast cancer cell (MDA-MB-231) and breast normal cell (MCF-10A) lines, were investigated by the means of MTT test. Accordingly, in comparison to the case of silver and magnesium doped zinc oxide nanoparticles, the un-doped ZnO NPs caused a more toxic impact on MDA-MB-231cells. There was a lack of any significant toxicity effects from un-doped and Ag and Mg dual doped ZnO nanoparticles on the experimented normal cell line (MCF-10A). The gathered results were indicative of a lower toxicity effect in doped nanoparticles when compared to un-doped nanoparticles and therefore, it can be stated that the doping of silver and magnesium metals produces more reliable zinc oxide nanoparticles.     

PREPARATION OF CLOUDY COCONUT OIL EMULSIONS CONTAINING DISPERSED TiO2 USING ATOMIZER

ABSTRACT

Food Grade Rutile TiO₂ was dispersed in coconut oil with the help of hydrophobic emulsifiers such as sorbitan esters and lecithin. The dispersed mixture was melted and blended with hydrophilic emulsifiers such as ethoxylated sorbitan esters and the preheated (60°C) blend was further sprayed by atomizer into cold water (20°C). The oil in water emulsions contained encapsulated TiO₂ in the internal phase. The technique is simple and allows preparation of stable emulsions with average droplets size of 1-10 microns.     

Nano-bio interface study between Fe content TiO2 nanoparticles and adenosine triphosphate biomolecules

The advent of nano-biotechnology has inspired the interface interaction study between engineered nanoparticles (NPs) and biomolecules. The interaction between Fe content titanium dioxide (TiO₂) NPs and adenosine triphosphate (ATP) biomolecules has been envisioned. The effect of Fe content in TiO₂ matrix was studied using X-ray diffraction (XRD) and transmission electron microscopy (TEM). The increase in Fe content caused a decrease in particle size with change in morphology from spherical to one-dimensional rod structure. The Fe incorporation in the TiO₂ matrix reduced the transition temperature from anatase to rutile (A-R) phase along with formation of haematite phase of iron oxide at 400°C. The interaction of Fe content TiO₂ NPs with ATP molecule has been studied using spectroscopic method of Raman scattering and infrared vibration spectrum along with TEM. Fe content in TiO₂ has enhanced the interaction efficiency of the NPs with ATP biomolecules. Raman spectroscopy confirms that the NPs interact strongly with nitrogen (N₇) site in the adenine ring of ATP biomolecule. Engineering of Fe content TiO₂ NP could successfully tune the coordination between metal oxide NPs with biomolecules, which could help in designing devices for biomedical applications.     

Interaction between oxide nanoparticles and biomolecules of the bacterial cell envelope as examined by infrared spectroscopy

The effects of Al(2)O(3), TiO(2), and ZnO nanoparticles (NPs) on bacteria cells and bacterial surface biomolecules were studied by Fourier transform infrared (FTIR) spectroscopy. All the examined biomolecules showed IR spectral changes after NP exposure. Lipopolysaccharide and lipoteichoic acid could bind to oxide NPs through hydrogen bonding and ligand exchange, but the cytotoxicity of NPs seemed largely related to the function-involved or devastating changes to proteins and phospholipids of bacteria. The three NPs decreased the intensity ratio of β-sheets/α-helices, indicating protein structure change, which may affect cell physiological activities. The phosphodiester bond of L-α-phosphatidylethanolamine was broken by ZnO NPs, forming phosphate monoesters and resulting in the highly disordered alkyl chain. Such damage to phospholipid molecular structure may lead to membrane rupture and cell leaking, which is consistent with the fact that ZnO is the most toxic of the three NPs. The cell surface biomolecular changes revealed by FTIR spectra provide a better understanding of the cytotoxicity of oxide NPs.     

Biogenic synthesis from <Emphasis Type="Italic">Prunus</Emphasis> × <Emphasis Type="Italic">yedoensis</Emphasis> leaf extract,characterization, and photocatalytic and antibacterial activity of TiO<Subscript>2</Subscript> nanoparticles

Green synthesis of TiO₂ nanoparticles (NPs) from Prunus × yedoensis leaf extract (PYLE), and their application for removal of phosphate and their antibacterial activity, were studied for the first time. NPs were obtained using a green chemistry approach from 0.1 M TiO₂ and PYLE at ratio of 1:1 (v/w). Initial confirmation of production of TiO₂ NPs was provided by a color change from white to light yellow, then calcination was performed at 500 °C for 1 h. The TiO₂ NPs were characterized using various analytical techniques such as ultraviolet–visible (UV–Vis) spectroscopy, X-ray diffraction analysis, Fourier-transform infrared spectroscopy, Raman spectroscopy, UV–Vis diffuse reflectance spectroscopy, X-ray photoelectron spectroscopy, and high-resolution transmission electron microscopy. The results indicated that the optimal amount of TiO₂ NPs for removal of phosphate was 10 mg/l (10 ppm) with duration of 25 min. Furthermore, the antibacterial activity of TiO₂ NPs was also investigated using two different bacteria (Gram-positive Staphylococcus aureus and Gram-negative Escherichia coli) in aqueous medium. The results revealed highly efficient sunlight-driven photocatalytic and antibacterial activity of TiO₂ NPs.     

Zinc Oxide Nanoparticles and Zinc Sulfate Impact Physiological Parameters and Boosts Lipid Peroxidation in Soil Grown Coriander Plants (Coriandrum sativum)

The objective of this study was to determine the oxidative stress and the physiological and antioxidant responses of coriander plants (Coriandrum sativum) grown for 58 days in soil with zinc oxide nanoparticles (ZnO NPs) and zinc sulfate (ZnSO₄) at concentrations of 0, 100, 200, 300, and 400 mg of Zn/kg of soil. The results revealed that all Zn compounds increased the total chlorophyll content (CHLt) by at least 45%, compared to the control group; however, with 400 mg/kg of ZnSO₄, chlorophyll accumulation decreased by 34.6%. Zn determination by induction-plasma-coupled atomic emission spectrometry (ICP–AES) showed that Zn absorption in roots and shoots occurred in plants exposed to ZnSO₄ at all concentrations, which resulted in high levels of hydrogen peroxide (H₂O₂) and malondialdehyde (MDA). Only at 400 mg/kg of ZnSO₄, a 78.6% decrease in the MDA levels was observed. According to the results, the ZnSO₄ treatments were more effective than the ZnO NPs to increase the antioxidant activity of catalase (CAT), ascorbate peroxidase (APX), and peroxidases (POD). The results corroborate that phytotoxicity was higher in plants subjected to ZnSO₄ compared to treatments with ZnO NPs, which suggests that the toxicity was due to Zn accumulation in the tissues by absorbing dissolved Zn⁺⁺ ions.     

CdS‐Encapsulated TiO2 Nanotube Arrays Lidded with ZnO Nanorod Layers and Their Photoelectrocatalytic Applications

A novel TiO₂ nanotube array/CdS nanoparticle/ZnO nanorod (TiO₂ NT/CdS/ZnO NR) photocatalyst was constructed which exhibited a wide‐absorption (200–535 nm) response in the UV/Vis region and was applied for the photoelectrocatalytic (PEC) degradation of dye wastewater. This was achieved by chemically assembling CdS into the TiO₂ NTs and then constructing a ZnO NR layer on the TiO₂ NT/CdS surface. Scanning electron microscopy (SEM) results showed that a new structure had been obtained. The TiO₂ NTs looked like many “empty bottles” and the ZnO NR layer served as a big lid. Meanwhile the CdS NPs were encapsulated between them with good protection. After being sensitized by the CdS NPs, the absorption‐band edge of the obtained photocatalyst was obviously red‐shifted to the visible region, and the band gap was reduced from its original 3.20 eV to 2.32 eV. Photoelectric‐property tests indicated that the TiO₂ NT/CdS/ZnO NR material maintained a very high PEC activity in both the ultraviolet (UV) and the visible region. The maximum photoelectric conversion efficiencies of TiO₂ NT/CdS/ZnO NR were 31.8 and 5.98 % under UV light (365 nm) and visible light (420–800 nm), respectively. In the PEC oxidation, TiO₂ NT/CdS/ZnO NR exhibited a higher removal ability for methyl orange (MO) and a high stability. The kinetic constants were 1.77×10^?4 s^?1 under UV light, which was almost 5.9 and 2.6 times of those on pure TiO₂ NTs and TiO₂ NT/ZnO NR, and 2.5×10^?4 s^?1 under visible light, 2.4 times those on TiO₂ NT/CdS.     

A study of the effect of the synthesis conditions of titanium dioxide on its morphology and cell toxicity properties

In this study, titanium dioxide nanoparticles (NPs) were synthesized using the home microwave method, and the effect of the microwave irradiation time on the structure of NPs was investigated. In addition, the morphological effect of these NPs on the toxicity of HDMSCs cells was investigated. The crystalline structure and morphology of the NPs were analyzed using X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), and field emission scanning electron microscopy (FE-SEM); the cytotoxicity was determined by the methyl thiazolyl tetrazolium (MTT) assay. X-ray diffraction analysis revealed that all thin films had a polycrystalline nature with an anatase phase of TiO₂. It was also found that the crystallite size increased with increasing microwave radiation time. The FTIR spectrum showed Ti-O-Ti properties by the peak in the range between 527 and 580 cm^?1. Further, the FE-SEM images showed that the grain size increased with increasing irradiation time. The MTT assay results showed that the accumulation of NPs leads to toxicity.     

Fabrication of Heterostructured Fe2TiO5–TiO2 Nanocages with Enhanced Photoelectrochemical Performance for Solar Energy Conversion

Photocatalysts with well‐designed compositions and structures are desirable for achieving highly efficient solar‐to‐chemical energy conversion. Heterostructured semiconductor photocatalysts with advanced hollow structures possess beneficial features for promoting the activity towards photocatalytic reactions. Here we develop a facile synthetic strategy for the fabrication of Fe₂TiO₅–TiO₂ nanocages (NCs) as anode materials in photoelectrochemical (PEC) water splitting cells. A hydrothermal reaction is performed to transform MIL‐125(Ti) nanodisks (NDs) to Ti–Fe–O NCs, which are further converted to Fe₂TiO₅–TiO₂ NCs through a post annealing process. Owing to the compositional and structural advantages, the heterostructured Fe₂TiO₅–TiO₂ NCs show enhanced performance for PEC water oxidation compared with TiO₂ NDs, Fe₂TiO₅ nanoparticles (NPs) and Fe₂TiO₅–TiO₂ NPs.     

Photocatalytic,antibacterial and anticancer activity of silver-doped zinc oxide nanoparticles

Silver-doped zinc oxide nanoparticles (Ag-ZnO NPs) were successfully synthesized by the Sol-gel method coated with polyethylene glycol as a stabilizing and capping agent. The UV–Vis spectrophotometer analysis was done to analyze the optical property of the nanoparticles. XRD pattern showed the hexagonal structure of ZnO nanoparticles and the reduction in the intensity of the peaks of Ag-ZnO NPs indicates the incorporation of Ag⁺ ions in the ZnO lattices. The surface structural properties of the NPs were confirmed by Field Emission Scanning Electron Microscope (FE-SEM), High Resolution Transmission Electron Microscopy (HRTEM) and Selected Area Electron Diffraction (SAED). The elemental composition of nanoparticles was confirmed by EDAX and XRF-Spectroscopy. The functional group of ZnO and Ag nanoparticles were determined by FT-IR spectroscopy. The photocatalytic activity of Ag-ZnO NPs was studied against ponceau and the maximum degradation percentage was observed to be 89% at 140 min. Further, Ag-ZnO NPs unveiled high potent antibacterial activity against the selected bacterial pathogens and it also rendered significant anticancer activity in UVB-induced HaCaT cells. Consequently, the fluorescent microscopic analysis confirmed the increasing Reactive Oxygen Species (ROS) generation and Mitochondrial Membrane Potential (MMP) loss in the HaCaT cells that leads to the apoptosis induction. Hence, the selected combination of nanoparticles has proven to exhibit higher photocatalytic, antibacterial and anticancer activity. In the near future, it could be an efficient tool for eradicating the dye pollution from wastewater and also preferably be utilized in the cosmetics and pharmaceutical industries to prevent skin cancer.     

Photocatalytically Renewable Micro‐electrochemical Sensor for Real‐Time Monitoring of Cells

Electrode fouling and passivation is a substantial and inevitable limitation in electrochemical biosensing, and it is a great challenge to efficiently remove the contaminant without changing the surface structure and electrochemical performance. Herein, we propose a versatile and efficient strategy based on photocatalytic cleaning to construct renewable electrochemical sensors for cell analysis. This kind of sensor was fabricated by controllable assembly of reduced graphene oxide (RGO) and TiO₂ to form a sandwiching RGO@TiO₂ structure, followed by deposition of Au nanoparticles (NPs) onto the RGO shell. The Au NPs‐RGO composite shell provides high electrochemical performance. Meanwhile, the encapsulated TiO₂ ensures an excellent photocatalytic cleaning property. Application of this renewable microsensor for detection of nitric oxide (NO) release from cells demonstrates the great potential of this strategy in electrode regeneration and biosensing.     

ZnO and TiO2 clusters as catalyst in the addition and abstraction reaction of acrylic acid with the OH radical

The present work displays the theoretical analysis on the role of metal oxide clusters as an effective catalyst in the reaction between acrylic acid and OH radical, which has an energy barrier of 12.4 kcal/mol. The formation of metal oxide cluster such as ZnO and TiO₂ with varying size from monomer to hexamer is analyzed using cohesive energy, which increases with cluster size. Adsorption of acrylic acid on clusters reveals that dimer ZnO and tetramer TiO₂ are good adsorbed entities. The dimer ZnO and tetramer TiO₂ clusters have reduced the barrier height. However, from the thermodynamical analysis of H-abstraction and OH addition reaction, the dimer ZnO cluster is found to be a good catalyst than a tetramer TiO₂ cluster. The favorable H abstraction and OH addition reactions are feasible at the active methylene group (–CH). OH addition reactions dominate over the H abstraction reaction. Further, the presence of metal oxide clusters enhances the rate of the reaction between acrylic acid and OH radical. The kinetics of the favorable reaction with a dimer ZnO cluster has a rate constant of 7.80 × 10⁻¹¹ cm³ molecule⁻¹ s⁻¹, which is higher than the literature report (1.75 × 10⁻¹¹ cm³ molecule⁻¹ s⁻¹). Overall, ZnO and TiO₂ metal oxide clusters can be effectively utilized as catalyst.     

Visible‐Light‐Induced Electron Transport from Small to Large Nanoparticles in Bimodal Gold Nanoparticle‐Loaded Titanium(IV) Oxide

A key to realizing the sustainable society is to develop highly active photocatalysts for selective organic synthesis effectively using sunlight as the energy source. Recently, metal‐oxide‐supported gold nanoparticles (NPs) have emerged as a new type of visible‐light photocatalysts driven by the excitation of localized surface plasmon resonance of Au NPs. Here we show that visible‐light irradiation (λ>430 nm) of TiO₂‐supported Au NPs with a bimodal size distribution (BM‐Au/TiO₂) gives rise to the long‐range (>40 nm) electron transport from about 14 small (ca. 2 nm) Au NPs to one large (ca. 9 nm) Au NP through the conduction band of TiO₂. As a result of the enhancement of charge separation, BM‐Au/TiO₂ exhibits a high level of visible‐light activity for the one‐step synthesis of azobenzenes from nitrobenzenes at 25 °C with a yield greater than 95 % and a selectivity greater than 99 %, whereas unimodal Au/TiO₂ (UM‐Au/TiO₂) is photocatalytically inactive.