Enhanced Performance of Camphorsulfonic Acid-Doped Perovskite Solar Cells

High-quality perovskite film with large grains and therefore reduced grain boundaries plays a significant role in improving the power conversion efficiency (PCE) and ensuring good long-term stability of the perovskite solar cells. In this work, we found that adding camphorsulfonic acid (CSA), a Lewis base, to the perovskite solution results in the crystallization of larger perovskite grains. By varying the concentration of CSA, we found that the optimal concentration of the additive is 1 mg/mL, which leads to an 20% increase in PCE of the cells compared to the reference CSA-free cell. Interestingly, we observed that the PCE of cells with an excess of CSA was initially poor, but may increase significantly over time, possibly due to CSA migration to the hole-transporting layer, leading to an improvement in its conductivity.     

Repair Strategies for Perovskite Solar Cells

In recent years, organic-inorganic hybrid halide perovskite solar cells(PSCs) have obtained rapid development due to their excellent optoelectronic properties and low fabrication cost. However, owing to the environmental sensitivity of perovskite materials, the instability of PSCs is the key issue hindering its commercialization. Developing feasible strategy to repair the degraded PSCs stands for effective and unique means to prolong the operational lifetime of PSCs. Herein, we summarize various methods to repair the degraded PSCs under the influence of different environmental conditions. Along with the repairing process, the optoelectronic properties of perovskite film as well as the corresponding PSCs are discussed. Some suggestions on how to further improve the intrinsic stability of perovskite and repairing effect of PSCs are also provided.     

Material and Interface Engineering for High‐Performance Perovskite Solar Cells: A Personal Journey and Perspective

Hybrid organic‐inorganic perovskite solar cells (PSCs) have become a shining star in the photovoltaic field due to their spectacular increase in power conversion efficiency (PCE) from 3.8 % to over 23 % in just few years, opening up the potential in addressing the important future energy and environment issues. The excellent photovoltaic performance can be attributed to the unique properties of the organometal halide perovskite materials, including high absorption coefficient, tunable bandgap, high defect tolerance, and excellent charge transport characteristics. The authors entered this field when pursuing research on dye‐sensitized solar cells (DSCs) by leveraging nanorods arrays for vectorial transport of the extracted electrons. Soon after, we and others realized that while the organometal halide perovskite materials have excellent intrinsic properties for solar cells, interface engineering is at least equally important in the development of high‐performance PSCs, which includes surface defect passivation, band alignment, and heterojunction formation. Herein, we will address this topic by presenting the historical development and recent progress on the interface engineering of PSCs primarily of our own group. This review is mainly focused on the material and interface design of the conventional n‐i‐p, inverted p‐i‐n and carbon electrode‐based structure devices from our own experience and perspective. Finally, the challenges and prospects of this area for future development will also be discussed.     

全固态介观太阳能电池:从染料敏化到钙钛矿

介观太阳能电池(Mesoscopic Solar Cells)作为新一代太阳能电池的突出代表, 具有原材料来源丰富, 制备工艺简单, 光电转换效率高等优点, 从而具有广阔的应用前景. 本工作简要评述了全固态介观太阳能电池从染料敏化太阳能电池(Dye-sensitized solar cells)发展到钙钛矿太阳能电池(Perovskite solar cells)过程中新材料、新技术和新概念的研究进展. 1998年, Grätzel课题组首次将固态有机空穴传输材料spiro-OMeTAD应用到染料敏化太阳能电池中, 制备出全固态染料敏化太阳能电池, 虽然仅获得了0.74%的光电转换效率, 但是却使得全固态染料敏化太阳能电池迅速发展成为介观太阳能电池的重要研究方向. 2012年, Park与Grätzel课题组合作, 使用钙钛矿型吸光材料(CH₃NH₃)PbI₃作为敏化剂, spiro-OMeTAD作为空穴收集层, 制备出光电转换效率达到9.7%的全固态介观太阳能电池, 又被称为钙钛矿太阳能电池. 自此, 基于钙钛矿材料的介观太阳能电池迅速成为太阳能电池领域的研究热点. 目前, 钙钛矿太阳能电池的最高公证效率已经达到20.1%. 钙钛矿太阳能电池作为介观太阳能电池商业化道路上里程碑式的突破, 在材料开发、界面优化以及器件稳定性方面的研究仍充满挑战, 也期待新的突破.     

Recent Advances in Flexible Perovskite Solar Cells: Fabrication and Applications

Flexible perovskite solar cells have attracted widespread research effort because of their potential in portable electronics. The efficiency has exceeded 18 % owing to the high‐quality perovskite film achieved by various low‐temperature fabrication methods and matching of the interface and electrode materials. This Review focuses on recent progress in flexible perovskite solar cells concerning low‐temperature fabrication methods to improve the properties of perovskite films, such as full coverage, uniform morphology, and good crystallinity; demonstrated interface layers used in flexible perovskite solar cells, considering key figures‐of‐merit such as high transmittance, high carrier mobility, suitable band gap, and easy fabrication via low‐temperature methods; flexible transparent electrode materials developed to enhance the mechanical stability of the devices; mechanical and long‐term environmental stability; an outlook of flexible perovskite solar cells in portable electronic devices; and perspectives of commercialization for flexible perovskite solar cells based on cost.     

钙钛矿太阳能电池中吸收层的研究进展

钙钛矿太阳能电池因具有成本低、制备容易和光电性能优异等突出特点受到了广泛关注.钙钛矿太阳能电池能量转化效率已从2009年的3.8%提升到2019年的25.2%.我们在文中重点总结了钙钛矿电池吸收层的制备工艺,掺杂和晶体组成、结构调控方面取得的重要进展,以及这些突破对电池效率提高的贡献,同时也提出了钙钛矿太阳能电池发展仍需要解决的问题.     

钙钛矿太阳能电池:器件设计和I-V滞回现象

基于染料敏化太阳能电池发展起来的有机-无机杂化钙钛矿太阳能电池经过不到5年的快速发展, 光电转换效率从最初的3.8%提高到了经过认证的17.9%. 但是常用结构的钙钛矿太阳能电池在性能测试过程中的电流-电压(I-V)曲线会随着测试器件扫描方向的不同而明显不同. 该现象被称为I-V滞回现象. 进一步研究发现I-V曲线还与扫描速度、起始测试的偏压值和光照历史明显相关. 本工作结合不同的器件构造, 就可能造成这种I-V滞回现象的不同原因进行了总结和分析, 并对如何获得可靠的光电转换效率的测试方法进行了评述.     

Improved Photovoltaic Performance from High Quality Perovskite Thin Film Grown with the Assistance of PC71BM

The strategy of sequentially spin-coating a perovskite film from the perovskite precursor and an electron transporting layer of [6,6]-phenyl-C_(71)-butyric acid methyl ester(PC_(71)BM) is developed to simplify the fabrication procedure of perovskite solar cells. X-ray diffraction and scanning electron microscopy indicate that PC_(71)BM film on perovskite layer can retard the evaporation of dimethyl sulfoxide(DMSO) efficiently, thus prolonging the transformation of intermediate phase to perovskite crystals, leading to a high quality perovskite thin film. The solar cells with the structure of indium tin oxides(ITO)/poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate)(PEDOT:PSS)/CH_3NH_3PbI_3/PC_(71)BM/bathocuproine(BCP)/Ag made from this simplified method exhibit a higher efficiency(12.68%) than those from the conventional one-step method(9.49%).     

全无机钙钛矿太阳电池: 现状与未来

近年来,基于ABX₃结构的有机无机杂化钙钛矿材料因其具有优良的光电特性和廉价的制作成本得到了全世界的广泛关注,但体系中的有机组分容易受到光、热、湿等外界条件的影响而分解,导致器件的PCE发生严重的下降,极大地限制了PSCs(Perovskite solar cells, PSCs)的产业化进程。利用纯无机阳离子完全取代ABX₃结构中的A位有机阳离子制备出全无机钙钛矿材料,因其优异的热稳定性和环境稳定性而得到了快速的发展。现阶段,基于全无机钙钛矿材料的全无机钙钛矿太阳能电池(I-PSCs)的效率已超过19%,应用前景广阔。本文回顾了近年来全无机钙钛矿材料的研究进展,对不同类型的全无机钙钛矿材料进行了综述和讨论,从成膜工艺、掺杂工程、后处理工程等方面论述了如何提升器件的稳定性。最后,对I-PSCs的大面积制备及其柔性应用进行了介绍,揭示了I-PSCs面临的挑战,并对该领域进行了展望。     

大面积钙钛矿太阳能电池

近年来,钙钛矿太阳能电池因其高效、低成本、可制成柔性器件等突出优点在光伏研究领域备受关注。本文系统综述了大面积钙钛矿电池的最新研究进展,介绍了钙钛矿太阳能电池的结构特点、发展历史、钙钛矿薄膜的主要制备技术及改善的方法等,讨论了大面积钙钛矿太阳能电池目前存在的问题、提高大面积器件效率的方法及大面积钙钛矿太阳能电池的应用研究及工业化。最后,对大面积钙钛矿太阳能电池的应用前景进行了展望。     

Carbon‐Electrode‐Tailored All‐Inorganic Perovskite Solar Cells To Harvest Solar and Water‐Vapor Energy

Moisture is the worst enemy for state‐of‐the‐art perovskite solar cells (PSCs). However, the flowing water vapor within nanoporous carbonaceous materials can create potentials. Therefore, it is a challenge to integrate water vapor and solar energies into a single PSC device. We demonstrate herein all‐inorganic cesium lead bromide (CsPbBr₃) solar cells tailored with carbon electrodes to simultaneously harvest solar and water‐vapor energy. Upon interfacial modification and plasma treatment, the bifunctional PSCs yield a maximum power conversion efficiency up to 9.43 % under one sun irradiation according to photoelectric conversion principle and a power output of 0.158 μW with voltage of 0.35 V and current of 0.45 μA in 80 % relative humidity through the flowing potentials at the carbon/water interface. The initial efficiency is only reduced by 2 % on exposing the inorganic PSC with 80 % humidity over 40 days. The successful realization of physical proof‐of‐concept multi‐energy integrated solar cells provides new opportunities of maximizing overall power output.     

Hexaazatrinaphthylene Derivatives: Efficient Electron‐Transporting Materials with Tunable Energy Levels for Inverted Perovskite Solar Cells

Hexaazatrinaphthylene (HATNA) derivatives have been successfully shown to function as efficient electron‐transporting materials (ETMs) for perovskite solar cells (PVSCs). The cells demonstrate a superior power conversion efficiency (PCE) of 17.6 % with negligible hysteresis. This study provides one of the first nonfullerene small‐molecule‐based ETMs for high‐performance p–i–n PVSCs.     

SnO2表面卤化提高钙钛矿太阳能电池光伏性能

钙钛矿太阳能电池(PSCs)成为近几年来迅速发展的新型太阳能电池,其中将SnO₂纳米粒子层用作电子传输层(ETL)的钙钛矿太阳能电池器件得到了广泛的关注。SnO₂有着更低的制备温度,使其具备应用于柔性器件的潜力,但与钙钛矿层能级不匹配等问题限制着其发展。而在界面处加入钝化层,尤其是表面卤化的方法或可解决这一问题。本文综合研究了SnO₂表面卤化对钙钛矿太阳能电池光伏性能的影响,选用四丁基氯化铵(TBAC)、四丁基溴化铵(TBAB)和四丁基碘化铵(TBAI)三种钝化材料对SnO₂表面进行钝化处理,并对钝化材料溶液进行了浓度梯度研究。通过材料形貌、结构和光学性能表征以及电池器件性能测试分析等方法,证明了SnO₂表面卤化可提高钙钛矿层的质量和PSCs光伏性能,并从器件内部电荷传输动力学等角度解释了器件性能改善的原因。为进一步说明其性能改善的机理,采用基于密度泛函理论(DFT)的第一性原理计算方法对材料表面性质进行了深入研究,从能量、结构、电荷密度、态密度、功函数等角度解释了表面卤化提高SnO₂/钙钛矿界面处电子传输特性的原因。实验和理论计算均表明TBAC对于SnO₂具有较好的钝化效果,并随着溶液浓度的提升钝化作用越明显。SnO₂表面卤化作用的深入研究不仅对提高电池器件性能具有实际意义,还能够帮助理解太阳能电池界面现象,为界面改性提供新的研究思路。     

All‐Inorganic CsPbX3 Perovskite Solar Cells: Progress and Prospects

Recently, lead halide‐based perovskites have become one of the hottest topics in photovoltaic research because of their excellent optoelectronic properties. Among them, organic‐inorganic hybrid perovskite solar cells (PSCs) have made very rapid progress with their power conversion efficiency (PCE) now at 23.7 %. However, the intrinsically unstable nature of these materials, particularly to moisture and heat, may be a problem for their long‐term stability. Replacing the fragile organic group with more robust inorganic Cs⁺ cations forms the cesium lead halide system (CsPbX₃, X is halide) as all‐inorganic perovskites which are much more thermally stable and often more stable to other factors. From the first report in 2015 to now, the PCE of CsPbX₃‐based PSCs has abruptly increased from 2.9 % to 17.1 % with much enhanced stability. In this Review, we summarize the field up to now, propose solutions in terms of development bottlenecks, and attempt to boost further research in CsPbX₃ PSCs.     

钙钛矿材料组分调控策略及其光电器件性能研究进展

近年来，钙钛矿太阳电池的光电转换效率取得了爆发式增长，这与电池中钙钛矿薄膜的制备工艺和材料组分密切相关.关于钙钛矿薄膜的制备方法，相关的研究报道及综述较多，然而钙钛矿材料组分调控方面的研究梳理工作相对缺乏.本综述总结了近年来不同组分体系钙钛矿材料的研究进展，包括有机无机铅卤钙钛矿、全无机铅卤钙钛矿、少铅钙钛矿以及无铅钙钛矿.重点介绍了不同体系中具有代表性的材料组分及其对器件性能的影响，旨在梳理通过组分调控提高钙钛矿电池的效率及稳定性的研究思路，最终实现商业化应用.     

界面钝化策略:提高钙钛矿太阳能电池的稳定性

近年来,新兴起的有机无机杂化钙钛矿太阳能电池突飞猛进,在短短十年里其光电转化效率从3.8%迅速发展到目前25.2%的认证效率,被视为最具有应用潜力的新型高效率太阳能电池之一。虽然钙钛矿太阳能电池具有很高的光电转换效率已与多晶硅薄膜电池相媲美,但是电池的长期稳定性仍是阻碍其商业化的一大挑战。钙钛矿表面和晶界存在大量的缺陷,界面钝化来提高钙钛矿太阳能电池的稳定性是非常重要且有效的策略。二维钙钛矿材料是有机胺层与无机层交替的层状钙钛矿,具有体积较大的有机铵阳离子,与传统的三维钙钛矿材料相比对于环境的稳定性较好,并且结构灵活可调,在三维钙钛矿表面修饰二维钙钛矿层钝化缺陷,在提高钙钛矿太阳能电池效率的同时又保证了稳定性,另外,合适的钝化剂分子也能够非常有效地钝化缺陷。本文总结了钙钛矿太阳能电池的不稳定因素,归纳了钙钛矿太阳能电池界面钝化方面的研究进展,指出了二维钙钛矿材料发展的巨大潜力以及寻找合适钝化剂分子的原则,期望能够为获得高性能的钙钛矿太阳能电池进而实现商业化提供有益的指导。     

Hole‐Transport Materials for Perovskite Solar Cells

The pressure to move towards renewable energy has inspired researchers to look for ideas in photovoltaics that may lead to a major breakthrough. Recently the use of perovskites as a light harvester has lead to stunning progress. The power conversion efficiency of perovskite solar cells is now approaching parity (>22 %) with that of the established technology which took decades to reach this level of performance. The use of a hole transport material (HTM) remains indispensable in perovskite solar cells. Perovskites can conduct holes, but they are present at low levels, and for efficient charge extraction a HTM layer is a prerequisite. Herein we provide an overview of the diverse types of HTM available, from organic to inorganic, in the hope of encouraging further research and the optimization of these materials.     

Emerging of Inorganic Hole Transporting Materials For Perovskite Solar Cells

Hole transporting material (HTM) is a significant component to achieve the high performance perovskite solar cells (PSCs). Over the years, inorganic, organic and hybrid (organic‐inorganic) material based HTMs have been developed and investigated successfully. Today, perovskite solar cells achieved the efficiency of 22.1 % with with 2,2’,7,7’‐tetrakis(N,N‐di‐p‐methoxyphenyl‐amine) 9,9‐spirobifluorene (spiro‐OMeTAD) as HTM. Nevertheless, synthesis and cost of organic HTMs is a major challenging issue and therefore alternative materials are required. From the past few years, inorganic HTMs showed large improvement in power conversion efficiency (PCE) and stability. Recently CuO_x reached the PCE of 19.0% with better stability. These developments affirms that inorganic HTMs are better alternativesto the organic HTMs for next generation PSCs. In this report, we mainly focussed on the recent advances of inorganic and hybrid HTMs for PSCs and highlighted the efficiency and stability of PSCs improved by changing metal oxides as HTMs. Consequently, we expect that energy levels of these inorganic HTMs matches very well with the valence band of perovskites and improved efficiency helps in future practical deployment of low cost PSCs.     

The Rise of Dye-Sensitized Solar Cells: From Molecular Photovoltaics to Emerging Solid-State Photovoltaic Technologies

Over the past three decades, dye-sensitized solar cells (i. e. Grätzel cells) have evolved from a pioneering concept of molecular photovoltaics to large-scale industrial deployment. In this review article, we provide a historical overview of the developments with a focus on the scientific advancements that have set the stage for this technology to emerge and thrive. This involves insights into the (photo)electrochemistry of the underlying processes, molecular engineering of dyes, redox shuttles, and hole-transporting materials, as well as their implementation into solar cells. We further outline applications and future perspectives, involving the long-lasting objective to develop efficient solid-state alternatives to conventional dye-sensitized solar cells.     

紫外光辐照下CH3NH3PbI3基钙钛矿太阳能电池失效机制

随着光伏产业的不断发展,有机无机杂化钙钛矿太阳能电池的研发成为科学与工业界广泛关注的焦点。到目前为止,其光电转换效率已经提高到了25.2%,成为替代硅基太阳能电池的核心方案之一。然而,钙钛矿太阳能电池的稳定性较差,容易受到环境中氧气、水分、温度甚至光照的影响,这严重制约了其大规模推广与应用。大量科学研究表明,如何避免紫外辐照下有机无机杂化钙钛矿太阳能电池的性能衰减,对于提高钙钛矿太阳能电池的光照稳定性至关重要。然而到目前为止,仍然没有系统的工作来对紫外辐照下钙钛矿太阳能电池性能以及微结构演化过程进行详细的表征与分析。本文中,我们利用聚焦离子束-扫描电子显微分析(FIB-SEM)以及球差校正透射电子显微分析(TEM)等技术,全面地研究了紫外辐照过程中有机无机杂化钙钛矿太阳能电池性能变化规律以及电池微结构演化特征。实验结果表明,紫外辐照过程中太阳能电池内部会形成0.5–0.6 V的内建电场,钙钛矿中的I^-离子在电场的驱动下向金属Au电极和空穴传输层2, 2’, 7, 7’-四[N, N-二(4-甲氧基苯基)氨基]-9, 9'-螺二芴(Spiro-OMeTAD)一侧迁移;随后,空穴传输层与金电极的界面处,碘离子与光生空穴一起与金电极发生反应,将金属态Au氧化成离子态Au⁺。而Au⁺离子则在内建电场的驱动下反向迁移穿过钙钛矿MAPbI₃层,直接被SnO₂和MAPbI₃界面处的电子还原形成金属Au纳米团簇。除此之外,紫外辐照过程中钙钛矿太阳能电池性能降低的同时,往往伴随着Spiro-OMeTAD与钙钛矿界面处物质迁移、钙钛矿薄膜内晶界展宽以及Au纳米颗粒周围MAPbI₃物相分解等现象。以上各种因素的协同作用,共同导致了紫外光照下有机无机杂化钙钛矿太阳能电池光电转换性能(PCE)、开路电压(V_oc)以及短路电流(J_sc)等性能参数的急剧下降。