S‐Doping of an Fe/N/C ORR Catalyst for Polymer Electrolyte Membrane Fuel Cells with High Power Density

Fe/N/C is a promising non‐Pt electrocatalyst for the oxygen reduction reaction (ORR), but its catalytic activity is considerably inferior to that of Pt in acidic medium, the environment of polymer electrolyte membrane fuel cells (PEMFCs). An improved Fe/N/C catalyst (denoted as Fe/N/C‐SCN) derived from Fe(SCN)₃, poly‐m‐phenylenediamine, and carbon black is presented. The advantage of using Fe(SCN)₃ as iron source is that the obtained catalyst has a high level of S doping and high surface area, and thus exhibits excellent ORR activity (23 A g^?1 at 0.80 V) in 0.1 M H₂SO₄ solution. When the Fe/N/C‐SCN was applied in a PEMFC as cathode catalyst, the maximal power density could exceed 1 W cm^?2.     

Graphitic Carbon Nitride (g‐C3N4): An Interface Enabler for Solid‐State Lithium Metal Batteries

Solid‐state Li metal batteries (SSLMBs) have attracted considerable interests due to their promising energy density as well as high safety. However, the realization of a well‐matched Li metal/solid‐state electrolyte (SSE) interface remains challenging. Herein, we report g‐C₃N₄ as a new interface enabler. We discover that introducing g‐C₃N₄ into Li metal can not only convert the Li metal/garnet‐type SSE interface from point contact to intimate contact but also greatly enhance the capability to suppress the dendritic Li formation because of the greatly enhanced viscosity, decreased surface tension of molten Li, and the in situ formation of Li₃N at the interface. Thus, the resulting Li‐C₃N₄|SSE|Li‐C₃N₄ symmetric cell gives a significantly low interfacial resistance of 11 Ω cm² and a high critical current density (CCD) of 1500 μA cm^?2. In contrast, the same symmetric cell configuration with pristine Li metal electrodes has a much larger interfacial resistance (428 Ω cm²) and a much lower CCD (50 μA cm^?2).     

Controlled Synthesis of a Vacancy‐Defect Single‐Atom Catalyst for Boosting CO2 Electroreduction

The reaction of precursors containing both nitrogen and oxygen atoms with Ni^II under 500 °C can generate a N/O mixing coordinated Ni‐N₃O single‐atom catalyst (SAC) in which the oxygen atom can be gradually removed under high temperature due to the weaker Ni?O interaction, resulting in a vacancy‐defect Ni‐N₃‐V SAC at Ni site under 800 °C. For the reaction of Ni^II with the precursor simply containing nitrogen atoms, only a no‐vacancy‐defect Ni‐N₄ SAC was obtained. Experimental and DFT calculations reveal that the presence of a vacancy‐defect in Ni‐N₃‐V SAC can dramatically boost the electrocatalytic activity for CO₂ reduction, with extremely high CO₂ reduction current density of 65 mA cm^?2 and high Faradaic efficiency over 90 % at ?0.9 V vs. RHE, as well as a record high turnover frequency of 1.35×10⁵ h^?1, much higher than those of Ni‐N₄ SAC, and being one of the best reported electrocatalysts for CO₂‐to‐CO conversion to date.     

Coupling of Bifunctional CoMn‐Layered Double Hydroxide@Graphitic C3N4 Nanohybrids towards Efficient Photoelectrochemical Overall Water Splitting

The development of durable, low‐cost, and efficient photo‐/electrolysis for the oxygen and hydrogen evolution reactions (OER and HER) is important to fulfill increasing energy requirements. Herein, highly efficient and active photo‐/electrochemical catalysts, that is, CoMn‐LDH@g‐C₃N₄ hybrids, have been synthesized successfully through a facile in situ co‐precipitation method at room temperature. The CoMn‐LDH@g‐C₃N₄ composite exhibits an obvious OER electrocatalytic performance with a current density of 40 mA cm^?2 at an overpotential of 350 mV for water oxidation, which is 2.5 times higher than pure CoMn‐LDH nanosheets. For HER, CoMn‐LDH@g‐C₃N₄ (η₅₀=?448 mV) requires a potential close to Pt/C (η₅₀=?416 mV) to reach a current density of 50 mA cm². Furthermore, under visible‐light irradiation, the photocurrent density of the CoMn‐LDH@g‐C₃N₄ composite is 0.227 mA cm^?2, which is 2.1 and 3.8 time higher than pristine CoMn‐LDH (0.108 mA cm^?2) and g‐C₃N₄ (0.061 mA cm^?2), respectively. The CoMn‐LDH@g‐C₃N₄ composite delivers a current density of 10 mA cm^?2 at 1.56 V and 100 mA cm^?2 at 1.82 V for the overall water‐splitting reaction. Therefore, this work establishes the first example of pure CoMn‐LDH and CoMn‐LDH@g‐C₃N₄ hybrids as electrochemical and photoelectrochemical water‐splitting systems for both OER and HER, which may open a pathway to develop and explore other LDH and g‐C₃N₄ nanosheets as efficient catalysts for renewable energy applications.     

A Versatile Iron–Tannin‐Framework Ink Coating Strategy to Fabricate Biomass‐Derived Iron Carbide/Fe‐N‐Carbon Catalysts for Efficient Oxygen Reduction

The conversion of biomass into valuable carbon composites as efficient non‐precious metal oxygen‐reduction electrocatalysts is attractive for the development of commercially viable polymer electrolyte membrane fuel‐cell technology. Herein, a versatile iron–tannin‐framework ink coating strategy is developed to fabricate cellulose‐derived Fe₃C/Fe‐N‐C catalysts using commercial filter paper, tissue, or cotton as a carbon source, an iron–tannin framework as an iron source, and dicyandiamide as a nitrogen source. The oxygen reduction performance of the resultant Fe₃C/Fe‐N‐C catalysts shows a high onset potential (i.e. 0.98 V vs the reversible hydrogen electrode (RHE)), and large kinetic current density normalized to both geometric electrode area and mass of catalysts (6.4 mA cm^?2 and 32 mA mg^?1 at 0.80 V vs RHE) in alkaline condition. This method can even be used to prepare efficient catalysts using waste carbon sources, such as used polyurethane foam.     

Zeolitic Imidazolate Framework (ZIF)‐Derived,Hollow‐Core,Nitrogen‐Doped Carbon Nanostructures for Oxygen‐Reduction Reactions in PEFCs

The facile synthesis of a porous carbon material that is doped with iron‐coordinated nitrogen active sites (FeNC‐70) is demonstrated by following an inexpensive synthetic pathway with a zeolitic imidazolate framework (ZIF‐70) as a template. To emphasize the possibility of tuning the porosity and surface area of the resulting carbon materials based on the structure of the parent ZIF, two other ZIFs, that is, ZIF‐68 and ZIF‐69, are also synthesized. The resulting active carbon material that is derived from ZIF‐70, that is, FeNC‐70, exhibits the highest BET surface area of 262 m² g^?1 compared to the active carbon materials that are derived from ZIF‐68 and ZIF‐69. The HR‐TEM images of FeNC‐70 show that the carbon particles have a bimodal structure that is composed of a spherical macroscopic pore (about 200 nm) and a mesoporous shell. X‐ray photoelectron spectroscopy (XPS) reveals the presence of Fe‐N‐C moieties, which are the primary active sites for the oxygen‐reduction reaction (ORR). Quantitative estimation by using EDAX analysis reveals a nitrogen content of 14.5 wt. %, along with trace amounts of iron (0.1 wt. %), in the active FeNC‐70 catalyst. This active porous carbon material, which is enriched with Fe‐N‐C moieties, reduces the oxygen molecule with an onset potential at 0.80 V versus NHE through a pathway that involves 3.3–3.8 e^? under acidic conditions, which is much closer to the favored 4 e^? pathway for the ORR. The onset potential of FeNC‐70 is significantly higher than those of its counterparts (FeNC‐68 and FeNC‐69) and of other reported systems. The FeNC‐based systems also exhibit much‐higher tolerance towards MeOH oxidation and electrochemical stability during an accelerated durability test (ADT). Electrochemical analysis and structural characterizations predict that the active sites for the ORR are most likely to be the in situ generated N? FeN₂₊₂/C moieties, which are distributed along the carbon framework.     

Dual‐Template Pore Engineering of Whey Powder‐Derived Carbon as an Efficient Oxygen Reduction Reaction Electrocatalyst for Primary Zinc‐Air Battery

Cost‐effective and high‐performance electrocatalysts for oxygen reduction reactions (ORR) are needed for many energy storage and conversion devices. Here, we demonstrate that whey powder, a major by‐product in the dairy industry, can be used as a sustainable precursor to produce heteroatom doped carbon electrocatalysts for ORR. Rich N and S compounds in whey powders can generate abundant catalytic active sites. However, these sites are not easily accessible by reactants of ORR. A dual‐template method was used to create a hierarchically and interconnected porous structure with micropores created by ZnCl₂ and large mesopores generated by fumed SiO₂ particles. At the optimum mass ratio of whey power: ZnCl₂ : SiO₂ at 1 : 3 : 0.8, the resulting carbon material has a large specific surface area close to 2000 m² g^?1, containing 4.6 at.% of N with 39.7% as pyridinic N. This carbon material shows superior electrocatalytic activity for ORR, with an electron transfer number of 3.88 and a large kinetic limiting current density of 45.40 mA cm^?2. They were employed as ORR catalysts to assemble primary zinc‐air batteries, which deliver a power density of 84.1 mW cm^?2 and a specific capacity of 779.5 mAh g^?1, outperforming batteries constructed using a commercial Pt/C catalyst. Our findings open new opportunities to use an abundant biomaterial, whey powder, to create high‐value‐added carbon electrocatalysts for emerging energy applications.     

Low‐Temperature N2 Binding to Two‐Coordinate L2Fe0 Enables Reductive Trapping of L2FeN2− and NH3 Generation

The two‐coordinate [(CAAC)₂Fe] complex [CAAC=cyclic (alkyl)(amino)carbene] binds dinitrogen at low temperature (T2 complex, [(CAAC)₂Fe(N₂)], was trapped by one‐electron reduction to its corresponding anion [(CAAC)₂FeN₂]^? at low temperature. This complex was structurally characterized and features an activated dinitrogen unit which can be silylated at the β‐nitrogen atom. The redox‐linked complexes [(CAAC)₂Fe^I][BAr^F₄], [(CAAC)₂Fe⁰], and [(CAAC)₂Fe^?IN₂]^? were all found to be active for the reduction of dinitrogen to ammonia upon treatment with KC₈ and HBAr^F₄?2 Et₂O at ?95 °C [up to (3.4±1.0) equivalents of ammonia per Fe center]. The N₂ reduction activity is highly temperature dependent, with significant N₂ reduction to NH₃ only occurring below ?78 °C. This reactivity profile tracks with the low temperatures needed for N₂ binding and an otherwise unavailable electron‐transfer step to generate reactive [(CAAC)₂FeN₂]^?.     

The new low‐band gap polymers comprising C‐, Si‐, or N‐bridged dithiophene and alkoxy‐modified 2,1,3‐benzooxadiazole units for bulk heterojunction solar cells

In this study, we used Stille coupling polymerization to synthesize a series of new low‐band gap‐conjugated polymers— PCyTBO , PCySiTBO , and PCyNTBO —comprising mainly electron‐rich C‐, Si‐, and N‐bridged dithiophene units in conjugation with electron‐deficient alkoxy‐modified 2,1,3‐benzooxadiazole moieties. The highest occupied molecular orbital energy levels of these polymers become higher as the electron‐donating ability of C‐, Si‐, or N‐bridged dithiophene units increases. These polymers also displayed excellent thermal stability and broad spectral absorptions, with PCySiTBO revealing some crystallinity. As a result, the photovoltaic device incorporating the PCySiTBO /PC₇₁BM (1:1) blend system and 1,8‐diiodooctane (2 vol %) as an additive exhibited excellent performance, under AM 1.5 G irradiation (100 mW cm^?2), with a value of V_oc of 0.64 V, a short‐circuit current density of 13.8 mA cm^?2, a fill factor of 0.57, and a promising power conversion efficiency of 5.0%. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis,properties and X‐ray structure of 5‐azido‐2‐methoxy‐1,3‐xylyl‐18‐crown‐5

5‐Azido‐2‐methoxy‐1,3‐xylyl‐18‐crown‐5 has been prepared by reacting p‐toluenesulfonyl azide with the carbanion generated from the reaction of 5‐bromo‐2‐methoxy‐1,3‐xylyl‐18‐crown‐5 with n‐butyl lithium. The asymmetric N₃ stretch of this product has been observed as a single band at 2110 cm^?1 in dichloromethane solution. Addition of solid NaSCN, KSCN and CsSCN shifts this band to 2115, 2113 and 2112 cm^?1, respectively. Computational studies of this azide at the B3LYP‐6‐31G* level in the presence and absence of Na⁺ predicted these bands to be at 2173 cm^?1 and 2184 cm^?1. For the salt‐containing solutions, additional bands were observed at 2066 cm^?1, 2056 cm^?1 and 2055 cm^?1, respectively, which are in the range expected for CN stretches. The X‐ray structure of this azide has been determined. The terminal and internal N? N bond lengths were found to be 1.127(2) and 1.245(2) Δ, respectively, which is the usual pattern for aromatic azides. The crown ether is looped over the face of the aromatic ring resulting in an angle of 38.94° between the plane defined by the aromatic ring and that defined by the five ring oxygen atoms. In addition, the CH₃ group is rotated out of the plane of the phenyl ring with C1‐C18‐O181‐C182 and C17‐C18‐O181‐C182 dihedral angles of 93.81(14)° and ‐90.54(14)°, respectively.     

High‐Efficiency Oxygen Reduction to Hydrogen Peroxide Catalyzed by Nickel Single‐Atom Catalysts with Tetradentate N2O2 Coordination in a Three‐Phase Flow Cell

Carbon‐supported Ni^II single‐atom catalysts with a tetradentate Ni‐N₂O₂ coordination formed by a Schiff base ligand‐mediated pyrolysis strategy are presented. A Ni^II complex of the Schiff base ligand (R,R)‐(?)‐N,N′‐bis(3,5‐di‐tert‐butylsalicylidene)‐1,2‐cyclohexanediamine was adsorbed onto a carbon black support, followed by pyrolysis of the modified carbon material at 300 °C in Ar. The Ni‐N₂O₂/C catalyst showed excellent performance for the electrocatalytic reduction of O₂ to H₂O₂ through a two‐electron transfer process in alkaline conditions, with a H₂O₂ selectivity of 96 %. At a current density of 70 mA cm^?2, a H₂O₂ production rate of 5.9 mol g_cat.^?1 h^?1 was achieved using a three‐phase flow cell, with good catalyst stability maintained over 8 h of testing. The Ni‐N₂O₂/C catalyst could electrocatalytically reduce O₂ in air to H₂O₂ at a high current density, still affording a high H₂O₂ selectivity (>90 %). A precise Ni‐N₂O₂ coordination was key to the performance.     

Nitrogen‐doped Carbon–CoOx Nanohybrids: A Precious Metal Free Cathode that Exceeds 1.0 W cm−2 Peak Power and 100 h Life in Anion‐Exchange Membrane Fuel Cells

Efficient and durable nonprecious metal electrocatalysts for the oxygen reduction (ORR) are highly desirable for several electrochemical devices, including anion exchange membrane fuel cells (AEMFCs). Here, a 2D planar electrocatalyst with CoO_x embedded in nitrogen‐doped graphitic carbon (N‐C‐CoO_x) was created through the direct pyrolysis of a metal–organic complex with a NaCl template. The N‐C‐CoO_x catalyst showed high ORR activity, indicated by excellent half‐wave (0.84 V vs. RHE) and onset (1.01 V vs. RHE) potentials. This high intrinsic activity was also observed in operating AEMFCs where the kinetic current was 100 mA cm^?2 at 0.85 V. When paired with a radiation‐grafted ETFE powder ionomer, the N‐C‐CoO_x AEMFC cathode was able to achieve extremely high peak power density (1.05 W cm^?2) and mass transport limited current (3 A cm^?2) for a precious metal free electrode. The N‐C‐CoO_x cathode also showed good stability over 100 hours of operation with a voltage decay of only 15 % at 600 mA cm^?2 under H₂/air (CO₂‐free) reacting gas feeds. The N‐C‐CoO_x cathode catalyst was also paired with a very low loading PtRu/C anode catalyst, to create AEMFCs with a total PGM loading of only 0.10 mg_Pt‐Ru cm^?2 capable of achieving 7.4 W mg^?1_PGM as well as supporting a current of 0.7 A cm^?2 at 0.6 V with H₂/air (CO₂ free)—creating a cell that was able to meet the 2019 U.S. Department of Energy initial performance target of 0.6 V at 0.6 A cm^?2 under H₂/air with a PGM loading <0.125 mg cm^?2 with AEMFCs for the first time.     

Carbon‐Supported Divacancy‐Anchored Platinum Single‐Atom Electrocatalysts with Superhigh Pt Utilization for the Oxygen Reduction Reaction

Maximizing the platinum utilization in electrocatalysts toward oxygen reduction reaction (ORR) is very desirable for large‐scale sustainable application of Pt in energy systems. A cost‐effective carbon‐supported carbon‐defect‐anchored platinum single‐atom electrocatalysts (Pt₁/C) with remarkable ORR performance is reported. An acidic H₂/O₂ single cell with Pt₁/C as cathode delivers a maximum power density of 520 mW cm^?2 at 80 °C, corresponding to a superhigh platinum utilization of 0.09 g_Pt kW^?1. Further physical characterization and density functional theory computations reveal that single Pt atoms anchored stably by four carbon atoms in carbon divacancies (Pt‐C₄) are the main active centers for the observed high ORR performance.     

Halide‐Anion Binding by Singly and Doubly N‐Confused Porphyrins

The halide‐binding properties of N‐confused porphyrin (NCP, 1 ) and doubly N‐confused porphyrins (trans‐N₂CP ( 2 ), cis‐N₂CP ( 3 )) were examined in CH₂Cl₂. In the free‐base forms, cis‐N₂CP ( 3 ) showed the highest affinity to each anion (Cl^?, Br^?, I^?) with association constants K_a=7.8×10³, 1.9×10³, and 5.8×10² M ^?1, respectively. As metal complexes, on the other hand, trans‐N₂CP 2–Cu exhibited the highest affinity to Cl^?, Br^?, and I^? with K_a=9.0×10⁴, 2.7×10⁴, and 1.9×10³ M ^?1, respectively. The corresponding K_a values for cis‐N₂CP 3–Cu and NCP 1–Cu were about 1/10 and 1/2, respectively, of those of 2–Cu . With the help of density functional theory (DFT) calculations and complementary affinity measurements of a series of trisubstituted N‐confused porphyrins, the efficient anion binding of NCPs was attributed to strong hydrogen bonding at the highly polarized NH moieties owing to the electron‐deficient C₆F₅ groups at meso positions as well as the ideally oriented dipole moments and large molecular polarizability. The orientation and magnitude of the dipole moments in NCPs were suggested to be important factors in the differentiation of the affinity for anions.     

Quinobis(imidazolylidene): Synthesis and Study of an Electron‐Configurable Bis(N‐Heterocyclic Carbene) and Its Bimetallic Complexes

Reaction of bromanil with N,N′‐dimesitylformamidine followed by deprotonation with NaN(SiMe₃)₂ afforded 1,1′,3,3′‐tetramesitylquinobis(imidazolylidene) ( 1 ), a bis(N‐heterocyclic carbene) (NHC) with two NHC moieties connected by a redox active p‐quinone residue, in 72 % yield of isolated compound. Bimetallic complexes of 1 were prepared by coupling to FcN₃ ( 2 ) or FcNCS ( 3 ; Fc=ferrocenyl) or coordination to [M(cod)Cl] ( 4 a or 4 b , where M=Rh or Ir, respectively; cod=1,5‐cyclooctadiene). Treatment of 4 a and 4 b with excess CO(g) afforded the corresponding [M(CO)₂Cl] complexes 5 a and 5 b , respectively. Analysis of 2 – 5 by NMR spectroscopy and X‐ray diffraction indicated that the electron‐deficient quinone did not significantly affect the inherent spectral properties or coordination chemistry of the flanking imidazolylidene units, as compared to analogous NHCs. Infrared spectroscopy and cyclic voltammetry revealed that decreasing the electron density at ML_n afforded an increase in the stretching energy and a decrease in the reduction potential of the quinone, indicative of metal–quinone electronic interaction. Differential pulse voltammetry and chronoamperometry of the metal‐centered oxidations in 2 – 4 revealed two single, one‐electron peaks. Thus, the metal atoms bound to 1 are oxidized at indistinguishable potentials and do not appear electronically coupled. However, the metal–quinone interaction was used to increase the electron density at coordinated metal atoms. Infrared spectroelectrochemistry revealed that the average ν_CO values for 5 a and 5 b decreased by 14 and 15 cm^?1, respectively, upon reduction of the quinone embedded within 1 . These shifts correspond to 10 and 12 cm^?1 decreases in the Tolman electronic parameter of this ditopic ligand.     

A new coordination complex based on a polynitrile ligand: bis(4‐amino‐3,5‐di‐2‐pyridyl‐4H‐1,2,4‐triazole)diaquairon(II) bis(1,1,3,3‐tetracyano‐2‐methylsulfanylpropenide)

The new high‐spin iron(II) complex, [Fe(C₁₂H₁₀N₆)₂(H₂O)₂](C₈H₃N₄S)₂ or [Fe(abpt)₂(H₂O)₂](tcnsme)₂ [where abpt is 4‐amino‐3,5‐di‐2‐pyridyl‐4H‐1,2,4‐triazole and tcnsme is the 1,1,3,3‐tetracyano‐2‐methylthiopropenide anion], consists of discrete [Fe(abpt)₂(H₂O)₂]²⁺ dications, where the Fe^II ion is coordinated by two N,N′‐bidentate chelating abpt ligands in the equatorial plane and two water molecules in trans positions, generating a distorted octahedral [FeN₄O₂] environment. The cationic unit is neutralized by two polynitrile tcnsme anions, in which the C—N, C—C and C—S bond lengths indicate extensive electronic delocalization. In the crystal structure, the dications and anions are linked through O—H...N and N—H...N hydrogen bonds involving the water H atoms and those of the NH₂ groups and the N atoms of the CN groups, leading to the formation of a three‐dimensional network.     

Electrochemical Phase Evolution of Metal‐Based Pre‐Catalysts for High‐Rate Polysulfide Conversion

In situ evolution of electrocatalysts is of paramount importance in defining catalytic reactions. Catalysts for aprotic electrochemistry such as lithium–sulfur (Li‐S) batteries are the cornerstone to enhance intrinsically sluggish reaction kinetics but the true active phases are often controversial. Herein, we reveal the electrochemical phase evolution of metal‐based pre‐catalysts (Co₄N) in working Li‐S batteries that renders highly active electrocatalysts (CoS_x). Electrochemical cycling induces the transformation from single‐crystalline Co₄N to polycrystalline CoS_x that are rich in active sites. This transformation propels all‐phase polysulfide‐involving reactions. Consequently, Co₄N enables stable operation of high‐rate (10 C, 16.7 mA cm^?2) and electrolyte‐starved (4.7 μL mg_S^?1) Li‐S batteries. The general concept of electrochemically induced sulfurization is verified by thermodynamic energetics for most of low‐valence metal compounds.     

Covalent Attachment of Anderson‐Type Polyoxometalates to Single‐Walled Carbon Nanotubes Gives Enhanced Performance Electrodes for Lithium Ion Batteries

Single‐walled carbon nanotubes (SWNTs) covalently functionalized with redox‐active organo‐modified polyoxometalate (POM) clusters have been synthesized and employed as electrode materials in lithium ion batteries. The Anderson cluster [MnMo₆O₂₄]^9? is functionalized with Tris (NH₂C(CH₂OH)₃) moieties, giving the new organic–inorganic hybrid [N(nC₄H₉)₄]₃[MnMo₆O₁₈{(OCH₂)₃CNH₂}₂]. The compound is then covalently attached to carboxylic acid‐functionalized SWNTs by amide bond formation and the stability of this nanocomposite is confirmed by various spectroscopic methods. Electrochemical analyses show that the nanocomposite displays improved performance as an anode material in lithium ion batteries compared with the individual components, that is, SWNTs and/or Anderson clusters. High discharge capacities of up to 932 mAh g^?1 at a current density of 0.5 mA cm^?2 can be observed, together with high long‐term cycling stability and decreased electrochemical impedance. Chemisorption of the POM cluster on the SWNTs is shown to give better electrode performance than the purely physisorbed analogues.     

Two‐Dimensional Co@N‐Carbon Nanocomposites Facilely Derived from Metal–Organic Framework Nanosheets for Efficient Bifunctional Electrocatalysis

Metal–organic frameworks (MOFs) and MOF‐derived nanomaterials have recently attracted great interest as highly efficient, non‐noble‐metal catalysts. In particular, two‐dimensional MOF nanosheet materials possess the advantages of both 2D layered nanomaterials and MOFs and are considered to be promising nanomaterials. Herein, we report a facile and scalable in situ hydrothermal synthesis of Co–hypoxanthine (HPA) MOF nanosheets, which were then directly carbonized to prepare uniform Co@N‐Carbon nanosheets for efficient bifunctional electrocatalytic hydrogen‐evolution reactions (HERs) and oxygen‐evolution reactions (OERs). The Co embedded in N‐doped carbon shows excellent and stable catalytic performance for bifunctional electrocatalytic OERs and HERs. For OERs, the overpotential of Co@N‐Carbon at 10 mA cm^?2 was 400 mV (vs. reversible hydrogen electrode, RHE). The current density of Co@N‐Carbon reached 100 mA cm^?2 at an overpotential of 560 mV, which showed much better performance than RuO₂; the largest current density of RuO₂ that could be reached was only 44 mA cm^?2. The Tafel slope of Co@N‐Carbon was 61 mV dec^?1, which is comparable to that of commercial RuO₂ (58 mV dec^?1). The excellent electrocatalytic properties can be attributed to the nanosheet structure and well‐dispersed carbon‐encapsulated Co, CoN nanoparticles, and N‐dopant sites, which provided high conductivity and a large number of accessible active sites. The results highlight the great potential of utilizing MOF nanosheet materials as promising templates for the preparation of 2D Co@N‐Carbon materials for electrocatalysis and will pave the way to the development of more efficient 2D nanomaterials for various catalytic applications.     

An Olefin‐Linked Covalent Organic Framework as a Flexible Thin‐Film Electrode for a High‐Performance Micro‐Supercapacitor

Developing effective synthetic strategies as well as enriching functionalities for sp²‐carbon‐linked covalent organic frameworks (COFs) still remains a challenge. Now, taking advantage of a variant of Knoevenagel condensation, a new fully conjugated COF ( g‐C₃₄N₆‐COF ) linked by unsubstituted C=C bonds was synthesized. Integrating 3,5‐dicyano‐2,4,6‐trimethylpyridine and 1,3,5‐triazine units into the molecular framework leads to the enhanced π‐electron communication and electrochemical activity. This COF shows uniform nanofibrous morphology. By assembling it with carbon nanotubes, a flexible thin‐film electrode for a micro‐supercapacitor (MSC) can be easily obtained. The resultant COF‐based MSC shows an areal capacitance of up to 15.2 mF cm^?2, a high energy density of up to 7.3 mWh cm^?3, and remarkable rate capability. These values are among the highest for state‐of‐the‐art MSCs. Moreover, this device exhibits excellent flexibility and integration capability.