Pd‐Catalyzed Cycloisomerization of 4‐Aza‐1,6‐enynes to 3‐Aza‐bicyclo[4.1.0]hept‐2‐enes

A method for the synthesis of bicyclo[4.1.0]heptenes from 1,6‐enynes through Pd‐catalyzed cycloisomerization has been developed. N‐ and O‐tethered 1,6‐enynes were successfully transformed to their corresponding 3‐aza‐ and 3‐oxabicyclo[4.1.0]heptenes in reasonable‐to‐high yields using the catalysts [PdCl₂(CH₃CN)₂]/P(OPh)₃ or [Pd(maleimidate)₂(PPh₃)₂] in toluene. The computational calculations using density functional theory indicate that [PdCl₂{P(OPh)₃}] in the oxidation state Pd^II acts as the active catalyst species for the formation of 3‐azabicyclo[4.1.0]heptenes through 6‐endo‐dig cyclization.     

New theoretically predicted RDX‐ and β‐HMX‐based high‐energy‐density molecules

Theoretically new high‐energy‐density materials (HEDM) in which the hydrogens on RDX and β‐HMX (hexahydro‐1,3,5‐trinitro‐1,3,5‐triazine and octahydro‐1,3,5,7‐tetranitro‐1,3,5,7‐tetrazocine, respectively) were sequentially replaced by (N NO₂)x functional groups were designed and evaluated using density functional theory calculations in combination with the Kamlet–Jacobs equations and an atoms‐in‐molecules (AIM) analysis. Improved detonation properties and reduced sensitivity compared to RDX and β‐HMX were predicted. Interestingly, the RDX and β‐HMX derivatives having one attached N NO₂ group [RDX‐(NNO₂)1 and HMX‐(NNO₂)1] showed excellent detonation properties (detonation velocities: 9.529 and 9.575 km·s⁻¹, and detonation pressures: 40.818 and 41.570 GPa, respectively), which were superior to the parent compounds. Sensitivity estimations obtained by calculating impact sensitivities and HOMO‐LUMO gaps indicated that RDX‐(NNO₂)1 and HMX‐(NNO₂)1 were less stable than RDX and HMX but more stable than any of the other derivatives. This method of sequential NNO₂ group attachment on conventional HEDMs offers a firm basis for further studies on the design of new explosives. Furthermore, the newly found structures may be promising candidates for better HEDMs.     

Combined experimental and computational modeling studies on 4‐[(2‐hydroxy‐3‐methylbenzylidene) amino]‐1,5‐dimethyl‐2‐phenyl‐1,2‐dihydro‐3H‐pyrazol‐3‐one

The Schiff base compound, 4‐[(2‐hydroxy‐3‐methylbenzylidene)amino]‐1,5‐dimethyl‐2‐phenyl‐1,2‐dihydro‐3H‐pyrazol‐3‐one, has been synthesized and characterized by IR, UV–vis, and X‐ray single‐crystal determination. Molecular geometry from X‐ray experiment of the title compound in the ground state have been compared using the density functional method (B3LYP) with 6‐31G(d,p) basis set. Calculated results show that density functional theory (DFT) can well reproduce the structure of the title compound. The energetic behavior of the title compound in solvent media has been examined using B3LYP method with the 6‐31G(d,p) basis set by applying the Onsager and the polarizable continuum model (PCM). The results obtained with these methods reveal that the PCM method provided more stable structure than Onsager's method. By using TD‐DFT method, electronic absorption spectra of the title compound have been predicted and a good agreement with the TD‐DFT method and the experimental one is determined. The predicted nonlinear optical properties of the title compound are much greater than ones of urea. In addition, DFT calculations of the title compound, molecular electrostatic potential and NBO analysis were performed at B3LYP/6‐31G(d,p) level of theory. © 2010 Wiley Periodicals, Inc. Int J Quantum Chem, 2011     

Decomposition of model alkoxyamines in simple and polymerizing systems. II. Diastereomeric N‐(2‐methylpropyl)‐N‐(1‐diethyl‐phosphono‐2,2‐dimethyl‐propyl)‐aminoxyl‐based compounds

Thermal reactions of the alkoxyamine diastereomers DEPN‐R′ [DEPN: N‐(2‐methylpropyl)‐N‐(1‐diethylphosphophono‐2,2‐dimethyl‐propyl)‐aminoxyl; R′: methoxy‐carbonylethyl and phenylethyl] with (R,R) + (S,S) and (R,S) + (S,R) configurations have been investigated by ¹H NMR at 100 °C. During the overall decay the diastereomers interconvert, and an analytical treatment of the combined processes is presented. Rate constants are obtained for the cleavage and reformation of DEPN‐R′ from NMR, electron spin resonance, and chemically induced dynamic nuclear polarization experiments also using 2,2,6,6‐tetramethylpiperidinyl‐1‐oxyl (TEMPO) as a radical scavenger. The rate constants depend on the diastereomer configuration and the residues R′. Simulations of the kinetics observed with styrene and methyl methacrylate containing solutions yielded rate constants for unimeric and polymeric alkoxyamines DEPN‐(M)_n‐R′. The results were compatible with the known DEPN mediation of living styrene and acrylate polymerizations. For methyl methacrylate the equilibrium constant of the reversible cleavage of the dormant chains DEPN‐(M)_n‐R′ is very large and renders successful living polymerizations unlikely. Mechanistic and kinetic differences of DEPN‐ and TEMPO‐mediated polymerizations are discussed. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3264–3283, 2002     

Six‐Coordinate Group 13 Complexes: The Role of d Orbitals and Electron‐Rich Multi‐Center Bonding

Bonding in six‐coordinate complexes based on Group 13 elements (B, Al, Ga, In, Tl) is usually considered to be identical to that in transition‐metal analogues. We herein demonstrate through sophisticated electronic‐structure analyses that the bonding in these Group 13 element complexes is fundamentally different and better characterized as electron‐rich hypervalent bonding with essentially no role for the d orbitals. This characteristic is carried through to the molecular properties of the complex.     

Energetic Salts Based on an Oxygen‐Containing Cation: 2,4‐Diamino‐1,3,5‐triazine‐6‐one

A family of energetic salts with high thermal stability and low impact sensitivity based on an oxygen‐containing cation, 2,4‐diamino‐1,3,5‐triazine‐6‐one, were synthesized and fully characterized by IR and multinuclear (¹H, ¹³C) NMR spectroscopy, elemental analysis, and differential scanning calorimetry. Insights into their sensitivities towards impact, friction, and electrostatics were gained by submitting the materials to standard tests. The structures of 2,4‐diamino‐1,3,5‐triazine‐6‐one nitrate, 2,4‐diamino‐1,3,5‐triazine‐6‐one sulfate, 2,4‐diamino‐1,3,5‐triazine‐6‐one perchlorate, 2,4‐diamino‐1,3,5‐triazine‐6‐one 5‐nitrotetrazolate were determined by single‐crystal X‐ray diffraction; their densities are 1.691, 1.776, 1.854, and 1.636 g cm^?3, respectively. Most of the salts decompose at temperatures over 180 °C; in particular, the salts 2,4‐diamino‐1,3,5‐triazine‐6‐one nitrate and 2,4‐diamino‐1,3,5‐triazine‐6‐one perchlorate, which decompose at 303.3 and 336.4 °C, respectively, are fairly stable. Furthermore, most of the salts exhibit excellent impact sensitivities (>40 J), friction sensitivities (>360 N), and are insensitive to electrostatics. The measured densities of these energetic salts range from 1.64 to 2.01 g cm^?3. The detonation pressure values calculated for these salts range from 14.6 to 29.2 GPa, and the detonation velocities range from 6536 to 8275 m s^?1; these values make the salts potential candidates for thermally stable and insensitive energetic materials.     

Scanning‐Tunneling‐Spectroscopy‐Directed Design of Tailored Deep‐Blue Emitters

Frontier molecular orbitals can be visualized and selectively set to achieve blue phosphorescent metal complexes. For this purpose, the HOMOs and LUMOs of tridentate Pt^II complexes were measured using scanning tunneling microscopy and spectroscopy. The introduction of electron‐accepting or ‐donating moieties enables independent tuning of the frontier orbital energies, and the measured HOMO–LUMO gaps are reproduced by DFT calculations. The energy gaps correlate with the measured and the calculated energies of the emissive triplet states and the experimental luminescence wavelengths. This synergetic interplay between synthesis, microscopy, and spectroscopy enabled the design and realization of a deep‐blue triplet emitter. Finding and tuning the electronic “set screws” at molecular level constitutes a useful experimental method towards an in‐depth understanding and rational design of optoelectronic materials with tailored excited state energies and defined frontier‐orbital properties.     

Comparative Analysis of Electron‐Density and Electron‐Localization Function for Dinuclear Manganese Complexes with Bridging Boron‐ and Carbon‐Centered Ligands

Bonding in borylene‐, carbene‐, and vinylidene‐bridged dinuclear manganese complexes [MnCp(CO)₂]₂X (X=B‐tBu, B=NMe₂, CH₂, C?CH₂) has been compared by analyses based on quantum theory of atoms in molecules (QTAIM), on the electron‐localization function (ELF), and by natural‐population analyses. All of the density functional theory based analyses agree on the absence of a significant direct Mn? Mn bond in these complexes and confirm a dominance of delocalized bonding via the bridging ligand. Interestingly, however, the topology of both charge density and ELF related to the Mn‐bridge‐Mn bonding depend qualitatively on the chosen density functional (except for the methylene‐bridged complex, which exhibits only one three‐center‐bonding attractor both in ??²ρ and in ELF). While gradient‐corrected functionals provide a picture with localized two‐center X? Mn bonding, increasing exact‐exchange admixture in hybrid functionals concentrates charge below the bridging atom and suggests a three‐center bonding situation. For example, the bridging boron ligands may be described either as substituted boranes (e.g., at BLYP or BP86 levels) or as true bridging borylenes (e.g., at BHLYP level). This dependence on the theoretical level appears to derive from a bifurcation between two different bonding situations and is discussed in terms of charge transfer between X and Mn, and in the context of self‐interaction errors exhibited by popular functionals.     

Theoretical study of molecular and electronic structure of 2‐Se‐(2‐methyl‐2‐propenyl)‐1‐benzoic acid

A theoretical study of 2‐Se‐(2‐methyl‐2‐propenyl)‐1‐benzoic acid was carried out to investigate the molecular and electronic structure of this molecule, using the B3LYP density functional theory (DFT) method with the 6‐311+G** basis set. The optimized geometry of the molecule was obtained for the ortho, meta, and para isomers of the complex. In addition, the theoretical vibrational spectrum is presented, and thermal corrections in the limit of 100–1,000 K are discussed using the Shomate thermodynamic equations. © 2006 Wiley Periodicals, Inc. Int J Quantum Chem, 2007     

Mean‐field theoretical analysis of brush‐coated nanoparticle dispersion in polymer matrices

The equilibrium dispersion of nanoparticles with grafted polymer chains into polymer matrices, of the same chemical structure as the brush, is studied through the device of mean‐field theory. Our results show that the disperion of brush‐coated nanoparticles into a matrix polymer is improved with (i) decreasing particle radius and (ii) increasing brush chain length. Both of these aspects can be understood based on the fact that, unlike the case of planar surfaces, homopolymer chains end‐grafted to spherical nanoparticle surfaces tangentially spread away from the surface thus alleviating the packing frustration that is created by the relatively high grafting densities. This permits significant brush/matrix overlap, even at high grafting densities, a regime that has only recently become experimentally available due to advances in polymer synthesis (i.e., the “grafting‐to” methods). © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 351–358, 2008     

Theoretical Study on Gas—phase Pyrolytic Reactions of N—Ethyl,Isopropyl and N—t—Butyl Substituted 2—Aminopyrazine

Density functional theory (DFT) and ab initio methods were used to study gas‐phase pyrolytic reaction mechanisms of iV‐ethyl, N‐isopropyl and N‐t‐butyl substituted 2‐aminopyrazine at B3LYP/6–31G* and MP2/6–31G*, respectively. Single‐point energies of all optimized molecular geometries were calculated at B3LYP/6–311 + G(2d,p) level. Results show that the pyrolytic reactions were carried out through a unimolecular first‐order mechanism which were caused by the migration of atom H(17) via a six‐member ring transition state. The activation energies which were verified by vibrational analysis and correlated with zero‐point energies along the reaction channel at B3LYP/6–311 + G(2d,p) level were 252.02 kJ. mo^?1 (N‐ethyl substituted), 235.92 kJ‐mol^?1 (N‐t‐isopropyl substituted) and 234.27 kJ‐mol^?1 (N‐t‐butyl substituted), respectively. The results were in good agreement with available experimental data.     

A solvation‐free‐energy functional: A reference‐modified density functional formulation

The three‐dimensional reference interaction site model (3D‐RISM) theory, which is one of the most applicable integral equation theories for molecular liquids, overestimates the absolute values of solvation‐free‐energy (SFE) for large solute molecules in water. To improve the free‐energy density functional for the SFE of solute molecules, we propose a reference‐modified density functional theory (RMDFT) that is a general theoretical approach to construct the free‐energy density functional systematically. In the RMDFT formulation, hard‐sphere (HS) fluids are introduced as the reference system instead of an ideal polyatomic molecular gas, which has been regarded as the appropriate reference system of the interaction‐site‐model density functional theory for polyatomic molecular fluids. We show that using RMDFT with a reference HS system can significantly improve the absolute values of the SFE for a set of neutral amino acid side‐chain analogues as well as for 504 small organic molecules. © 2015 Wiley Periodicals, Inc.     

Positional Effect of the Triphenylamine Group on the Optical and Charge‐Transfer Properties of Thiophene‐Based Hole‐Transporting Materials

Hybrid organic‐inorganic perovskite solar cells (PSCs) have shown significant potential for use in the energy field. Typically, hole‐transporting materials (HTMs) play an important role in affecting the power conversion efficiency (PCE) of PSCs. A deep understanding of the structure‐property relationship plays a vital role in developing efficient HTMs. Herein, the relationship between the structure and properties of two small organic HTMs H2,5 and H3,4 were systematically investigated in terms of the electronic and optical properties, the hole‐transporting behavior by using density functional theory (DFT) and Marcus electron transfer theory. The results demonstrated that the high power conversion efficiency of the H2,5‐ based PSC was caused by strong interactions with the perovskite material on the interface and an enhanced hole mobility in H2,5 compared with H3,4 . The strong interaction derives from the short bond length of O atom of HTM and Pb atom of perovskite material, and the highly hole mobility derives from the quasi‐planar conjugated conformation and tight packing model of neighboring molecules in H2,5 . In addition, we found that the planar structure enhances the intermolecular interaction between HTM and perovskite materials compared with the ′V′‐shaped molecule. Importantly, we also note that the HOMO level of the isolated molecule is not always proportional to the open‐circuit voltages of PSCs since the HOMO level might move toward a higher level when the interaction between HTM and interface of perovskite was included. The work gives essential information for rational designing efficient HTMs.     

Synthesis,Crystal Structure and Density Functional Studies on 1N‐Phenyl‐3‐(2,4‐Dichlorophenyl)‐5‐(4‐Chlorophenyl)‐2‐Pyrazoline

1N‐Phenyl‐3‐(2,4‐dichlorophenyl)‐5‐(4‐chlorophenyl)‐2‐pyrazoline has been synthesized and characterized by elemental analysis, IR, UV‐Vis and X‐ray single crystal diffraction. Density functional calculations have been carried out for the title compound by using the B3LYP method with a 6‐311G** basis set. The calculated results show that the predicted geometry can reproduce well the structural parameters. The electronic absorption spectra calculated in the gas phase are better than those calculated in EtOH solvent to model the experimental electronic spectra. Natural Bond Orbital (NBO) analyses suggest that the above electronic transitions are mainly assigned to π → π* transitions. On the basis of vibrational analyses, the thermodynamic properties of the compound at different temperatures have been calculated, revealing the correlations between C⁰_{p, m}, S⁰_m, H⁰_m and temperature.     

Synthesis and Spectroscopic Properties of Fused‐Ring‐Expanded Aza‐Boradiazaindacenes

A series of fused‐ring‐expanded aza‐boradiazaindacene (aza‐BODIPY) dyes have been synthesized by reacting arylmagnesium bromides with phthalonitriles or naphthalenedicarbonitriles. An analysis of the structure–property relationships has been carried out based on X‐ray crystallography, optical spectroscopy, and theoretical calculations. Benzo and 1,2‐naphtho‐fused 3,5‐diaryl aza‐BODIPY dyes display markedly red shifted absorption and emission bands in the near‐IR region (>700 nm) due to changes in the energies of the frontier MOs relative to those of 1,3,5,7‐tetraaryl aza‐BODIPYs. Only one 1,2‐naphtho‐fused aza‐BODIPY of the three possible isomers is formed due to steric effects, and 2,3‐naphtho‐fused compounds could not be characterized because the final BF₂ complexes are unstable in solution. The incorporation of a  N(CH₃)₂ group at the para‐positions of a benzo‐fused 3,5‐diaryl aza‐BODIPY quenches the fluorescence in polar solvents and results in a ratiometric pH response, which could be used in future practical applications as an NIR “turn‐on” fluorescence sensor.