Nonlinear Optical Switching in Regioregular Porphyrin Covalent Organic Frameworks

Covalent organic frameworks (COFs) have garnered immense scientific interest among porous materials because of their structural tunability and diverse properties. However, the response of such materials toward laser‐induced nonlinear optical (NLO) applications is hardly understood and demands prompt attention. Three novel regioregular porphyrin (Por)‐based porous COFs—Por‐COF‐HH and its dual metalated congeners Por‐COF‐ZnCu and Por‐COF‐ZnNi—have been prepared and present excellent NLO properties. Notably, intensity‐dependent NLO switching behavior was observed for these Por‐COFs, which is highly desirable for optical switching and optical limiting devices. Moreover, the efficient π‐conjugation and charge‐transfer transition in ZnCu‐Por‐COF enabled a high nonlinear absorption coefficient (β=4470 cm/GW) and figure of merit (FOM=σ₁/σ_o, 3565) value compared to other state‐of‐the‐art materials, including molecular porphyrins (β≈100–400 cm/GW), metal–organic frameworks (MOFs; β≈0.3–0.5 cm/GW), and graphene (β=900 cm/GW).     

A Tale of Two Trimers from Two Different Worlds: A COF‐Inspired Synthetic Strategy for Pore‐Space Partitioning of MOFs

The introduction of a symmetry‐ and size‐matching pore‐partitioning agent in the form of either a molecular ligand, such as 2,4,6‐tri(4‐pyridinyl)‐1,3,5‐triazine ( tpt ), or a metal‐complex cluster, into the hexagonal channels of MIL‐88/MOF‐235‐type (the acs net) to create pacs ‐type (partitioned acs ) crystalline porous materials is an effective strategy to develop high‐performance gas adsorbents. We have developed an integrated COF–MOF coassembly strategy as a new method for pore‐space partitioning through the coassembly of [(M₃(OH)_1?x(O)_x(COO)₆] MOF‐type and [B₃O₃(py)₃] COF‐type trimers. With this strategy, the coordination‐driven assembly of the acs framework occurred concurrently and synergistically with the COF‐1‐type condensation of pyridine‐4‐boronic acid into a C₃‐symmetric trimeric boroxine molecule. The resulting boroxine‐based pacs materials exhibited dramatically enhanced gas‐sorption properties as compared to nonpartitioned acs ‐type materials and are among the most efficient NH₃‐sorption materials.     

Synthesis and two‐photon absorption properties of hyperbranched diketo‐pyrrolo‐pyrrole polymer with triphenylamine as the core

A novel hyperbranched polyyne (hb‐ DPP ) with triphenylamine as the core, 2,5‐dioctylpyrrolo [3,4‐c]pyrrole‐1,4 (2H,5H)‐dione ( DPP ) as the connecting unit has been designed and synthesized by Glaser‐Hay oxidative coupling reaction, which was characterized by IR, NMR, UV‐vis, FL, and GPC. The polymer exhibits high molecular weight (M_w up to ～6.55 × 10⁴ Da) and is readily soluble in common organic solvents such as toluene, chloroform, tetrahydrofuran, N,N‐dimethyl formamide and so on. The one‐ and two‐photon absorption (TPA) properties have been investigated. The TPA cross section of the polymer was measured by open‐aperture Z‐scan experiment using 140 femtosecond (fs) pulse, and the TPA cross section for hb‐ DPP was determined to be 579 GM per repeating unit at wavelength of 800 nm. In tetrahydrofuran, hb‐ DPP exhibits intense frequency up‐converted fluorescence with the peak located at 584 nm under the excitation of 800 nm fs pulses. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4400–4408, 2009     

A Novel BODIPY‐Based Low‐Band‐Gap Small‐Molecule Acceptor for Efficient Non‐fullerene Polymer Solar Cells

We report herein an efficient A¹‐C≡C‐A²‐C≡C‐A¹ type small‐molecule 4,4'‐difluoro‐4‐bora‐3a,4a‐diaza‐s‐ indacene (BODIPY) acceptor (A¹=BODIPY and A²=diketopyrrolopyrrole (DPP)) by following the A‐to‐A excited electron delocalization via the BODIPY meso ‐position, the inherent directionality for the excited electron delocalization. The lowest unoccupied molecular orbital (LUMO) delocalizes across over whole the two flanking A¹ and the central A², and the highest occupied molecular orbital (HOMO) localizes dominantly on the ‐C≡C‐DPP‐C≡C‐ segment. The excited electron upon light excitation of the DPP segment delocalizes over both the BODIPY and DPP segments. The acceptor in chloroform shows an unprecedented plateau‐like broad absorption between 550 and 700 nm with a large FWHM value of 195 nm. Upon transition into solid film, the acceptor shows absorption in the whole near ultraviolet‐visible‐near infrared wavelength region (300‐830 nm) with a low band gap of 1.5 eV and a maximum absorptivity of 0.85×10⁵ cm^‐1. Introduction of the ethynyl spacer between the A¹ and A² and the close BODIPY‐to‐DPP LUMO energy levels are crucial for the excited π−electron delocalization across over whole the conjugation backbone. A power conversion efficiency of 6.60% was obtained from the ternary non‐fullerene solar cell with PTB7‐Th:p ‐DTS(FBTTh₂)₂ (0.5 : 0.5) as the donor materials, which is the highest value among the non‐fullerene organic solar cells with BODIPY as the electron acceptor material.     

A Molecular Pillar Approach To Grow Vertical Covalent Organic Framework Nanosheets on Graphene: Hybrid Materials for Energy Storage

Hybrid 2D–2D materials composed of perpendicularly oriented covalent organic frameworks (COFs) and graphene were prepared and tested for energy storage applications. Diboronic acid molecules covalently attached to graphene oxide (GO) were used as nucleation sites for directing vertical growth of COF‐1 nanosheets (v‐COF‐GO). The hybrid material has a forest of COF‐1 nanosheets with a thickness of 3 to 15 nm in edge‐on orientation relative to GO. The reaction performed without molecular pillars resulted in uncontrollable growth of thick COF‐1 platelets parallel to the surface of GO. The v‐COF‐GO was converted into a conductive carbon material preserving the nanostructure of precursor with ultrathin porous carbon nanosheets grafted to graphene in edge‐on orientation. It was demonstrated as a high‐performance electrode material for supercapacitors. The molecular pillar approach can be used for preparation of many other 2D‐2D materials with control of their relative orientation.     

Phthalimide and Naphthalimide end‐Capped Diketopyrrolopyrrole for Organic Photovoltaic Applications

Two small molecules named PI‐DPP and NI‐DPP with a DPP core as the central strong acceptor unit and phthalimide/naphthalimide as the terminal weak acceptor were designed and synthesized. The effects of terminal phthalimide/naphthalimide units on the thermal behavior, optical and electrochemical properties, as well as the photovoltaic performance of these two materials were systematically studied. Cyclic voltammetry revealed that the lowest unoccupied molecular orbitals (LUMO) (~ ‐3.6 eV) of both molecules were intermediate to common electron donor (P3HT) and acceptor (PCBM). This indicated that PI‐DPP and NI‐DPP may uniquely serve as electron donor when blended with PCBM, and as electron acceptor when blended with P3HT, where sufficient driving forces between DPPs and PCBM, as well as between P3HT and DPPs should be created for exciton dissociation. Using as electron donor materials, PI‐DPP and NI‐DPP devices exhibited low power conversion efficiencies (PCEs) of 0.90% and 0.76% by blending with PCBM, respectively. And a preliminary evaluation of the potential of the NI‐DPP as electron acceptor material was carried out using P3HT as a donor material, and P3HT: NI‐DPP device showed a PCE of 0.6%, with an open circuit voltage (V _OC) of 0.7 V, a short circuit current density (J _SC) of 1.91 mA•cm^‐2, and a fill factor (FF) of 45%.     

Exploring the influence of acceptor content on semi‐random conjugated polymers

A family of diketopyrrolopyrrole (DPP)‐incorporated P3HT based semi‐random copolymers was synthesized and their optical, electronic and photovoltaic properties were investigated. For the first time, the influence of acceptor content on semi‐random copolymers was explored in the broad range of 10–40% acceptor. A mixture of DPP acceptor units with different side chains (ethylhexyl and decyltetradecyl) was incorporated into each copolymer to improve solubility and film quality. Increased DPP content in the polymer backbone resulted in broadened absorption between 350 and 900 nm, resulting in a monotonic decrease in optical band gap (E_g) of the polymers from 1.49 to 1.37 eV. Highest occupied molecular orbital (HOMO) energy levels showed an increase from 10% DPP to 20–30% DPP, while decreasing for 40% DPP. V_oc values followed a consistent trend with HOMO energy levels. Semi‐random copolymers showed significantly improved photovoltaic properties compared with P3HT. Bulk heterojunction solar cells fabricated from the semi‐random copolymers blended with PC₆₁BM exhibited high short‐circuit current densities (J_sc) up to 10.29 mA/cm² and efficiencies up to 4.43%. A new method of methanol treatment was developed and applied to the semi‐random copolymers resulting in high fill factors approaching 0.70 under ambient conditions. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 3884–3892     

Vinylene‐Linked Covalent Organic Frameworks by Base‐Catalyzed Aldol Condensation

Two 2D covalent organic frameworks (COFs) linked by vinylene (?CH=CH?) groups (V‐COF‐1 and V‐COF‐2) are synthesized by exploiting the electron deficient nature of the aromatic s‐triazine unit of C₃‐symmetric 2,4,6‐trimethyl‐s‐triazine (TMT). The acidic terminal methyl hydrogens of TMT can easily be abstracted by a base, resulting in a stabilized carbanion, which further undergoes aldol condensation with multitopic aryl aldehydes to be reticulated into extended crystalline frameworks (V‐COFs). Both V‐COF‐1 (with terepthalaldehyde (TA)) and V‐COF‐2 (with 1,3,5‐tris(p‐formylphenyl)benzene (TFPB)) are polycrystalline and exhibit permanent porosity and BET surface areas of 1341 m² g^?1 and 627 m² g^?1, respectively. Owing to the close proximity (3.52 Å) of the pre‐organized vinylene linkages within adjacent 2D layers stacked in eclipsed fashion, [2+2] photo‐cycloadditon in V‐COF‐1 formed covalent crosslinks between the COF layers.     

New photoluminescent conjugated polymers with 1,4‐dioxo‐3,6‐diphenylpyrrolo[3,4‐c]pyrrole (DPP) and 1,4‐phenylene units in the main chain

A series of π‐conjugated polymers and copolymers containing 1,4‐dioxo‐3,6‐diphenylpyrrolo[3,4‐c]pyrrole (also known as 2,5‐dihydro‐3,6‐diphenylpyrrolo[3,4‐c]pyrrole‐1,4‐dione) (DPP) and 1,4‐phenylene units in the main chain is described. The polymers are synthesised using the palladium‐catalysed aryl‐aryl coupling reaction (Suzuki coupling) of 2,5‐dihexylbenzene‐1,4‐diboronic acid with 1,4‐dioxo‐2,5‐dihexyl‐3,6‐di(4‐bromophenyl)pyrrolo[3,4‐c]pyrrole and 1,4‐dibromo‐2,5‐dihexylbenzene in different molar ratios. Soluble hairy rod‐type polymers with molecular weights up to 21 000 are obtained. Polymer solutions in common organic solvents such as chloroform or xylene are of orange colour (λ_max = 488 nm) and show strong photoluminescence (λ_max = 544 nm). The photochemical stability is found to be higher than for corresponding saturated polymers containing isolated DPP units in the main chain. Good solubility and processability into thin films render the compounds suitable for electronic applications.     

Ag Nanoparticles Supported on a Resorcinol‐Phenylenediamine‐Based Covalent Organic Framework for Chemical Fixation of CO2

Covalent organic frameworks are a new class of crystalline organic polymers possessing a high surface area and ordered pores. Judicious selection of building blocks leads to strategic heteroatom inclusion into the COF structure. Owing to their high surface area, exceptional stability and molecular tunability, COFs are adopted for various potential applications. The heteroatoms lining in the pores of COF favor synergistic host–guest interaction to enhance a targeted property. In this report, we have synthesized a resorcinol‐phenylenediamine‐based COF which selectively adsorbs CO₂ into its micropores (12 Å). The heat of adsorption value (32 kJ mol^?1) obtained from the virial model at zero‐loading of CO₂ indicates its favorable interaction with the framework. Furthermore, we have anchored small‐sized Ag nanoparticles (≈4–5 nm) on the COF and used the composite for chemical fixation of CO₂ to alkylidene cyclic carbonates by reacting with propargyl alcohols under ambient conditions. Ag@COF catalyzes the reaction selectively with an excellent yield of 90 %. Recyclability of the catalyst has been demonstrated up to five consecutive cycles. The post‐catalysis characterizations reveal the integrity of the catalyst even after five reaction cycles. This study emphasizes the ability of COF for simultaneous adsorption and chemical fixation of CO₂ into corresponding cyclic carbonates.     

Rational Design of MOF/COF Hybrid Materials for Photocatalytic H2 Evolution in the Presence of Sacrificial Electron Donors

Crystalline and porous covalent organic frameworks (COFs) and metal‐organic frameworks (MOFs) materials have attracted enormous attention in the field of photocatalytic H₂ evolution due to their long‐range order structures, large surface areas, outstanding visible light absorbance, and tunable band gaps. In this work, we successfully integrated two‐dimensional (2D) COF with stable MOF. By covalently anchoring NH₂‐UiO‐66 onto the surface of TpPa‐1‐COF, a new type of MOF/COF hybrid materials with high surface area, porous framework, and high crystallinity was synthesized. The resulting hierarchical porous hybrid materials show efficient photocatalytic H₂ evolution under visible light irradiation. Especially, NH₂‐UiO‐66/TpPa‐1‐COF (4:6) exhibits the maximum photocatalytic H₂ evolution rate of 23.41 mmol g^?1 h^?1 (with the TOF of 402.36 h^?1), which is approximately 20 times higher than that of the parent TpPa‐1‐COF and the best performance photocatalyst for H₂ evolution among various MOF‐ and COF‐based photocatalysts.     

Adsorption Properties of Hydrated Cr3+ Ions on Schiff‐base Covalent Organic Frameworks: A DFT Study

Considering the superior physiochemical property, increasing efforts have been devoted to exploiting the covalent organic frameworks (COFs) materials on the environmental remediation of heavy metal ions. Water pollution caused by Cr³⁺ metal ions is of special concern for scientists and engineers. Notwithstanding all the former efforts made, it is surprising that very little is known about the interaction mechanisms between the hydrated Cr³⁺ metal ions and COF materials. In present context, density functional theory (DFT) method is used to elucidate geometric and electronic properties with the purpose of putting into theoretical perspective the application values and interaction mechanisms for COF materials on Cr³⁺ capture. The results showed that all the five selected Schiff‐base COFs materials displayed good adsorption performance on Cr³⁺ removal while the phenazine‐linked and imine‐COFs possessed the most favorable adsorption capacity due to the optimal chemical units and frameworks. The hydration effect was found to play a two‐side role in the adsorption process and interaction mechanisms, involving coordination, hydrogen bonds, as well as weak non‐covalent interactions, have been illuminated to explain the observed different adsorption behaviors. This study provides a general guidance for the design and selection of efficient COF materials as high‐capacity Cr³⁺ adsorbents.     

Electrooxidation of Nitrite Mediated by Cu‐x‐Tetraaminophenylporphyrin (x=2, 3, and 4) Glassy Carbon‐Modified Electrodes: Effect of Substituent Position

A study of glassy carbon electrodes modified with poly‐Cu‐x‐tetraaminophenylporphyrin (TAPP) (x=2, 3, and 4) toward the electrooxidation of nitrite is reported. The position of the amino group influences the degree of electropolymerization and the response toward the electrooxidation of nitrite. The influence of pH on the electrocatalytic oxidation of nitrite was also studied, finding that the activity is strongly pH‐dependent. For each system (polymeric porphyrins, poly‐Cu‐2‐TAPP, poly‐Cu‐3‐TAPP, and poly‐Cu‐4‐TAPP), the behavior of the modified electrode as amperometric nitrite sensor was studied at the best pH response, finding a linear correlation over a wide range of concentrations for poly‐Cu‐3‐TAPP. With poly‐Cu‐2‐TAPP, the range is smaller, and there is no linear relationship for poly‐Cu‐4‐TAPP. The plot of I_p vs. the square root of the scan rate shows a linear relationship for all the polymer systems, indicating that the electrooxidation of nitrite in the modified electrodes is a process controlled by diffusion. The Tafel slope was calculated, indicating that the determining step in the electrooxidation of nitrite varies depending on the position of the substituent, showing a dramatic change in the nature of the active sites.     

Improved Spectral Coverage and Fluorescence Quenching in Donor–acceptor Systems Involving Indolo[3‐2‐b]carbazole and Boron‐dipyrromethene or Diketopyrrolopyrrole

A novel π‐conjugated triad and a polymer incorporating indolo[3,2‐b]‐carbazole (ICZ) and 4,4‐difluoro‐4‐bora‐3a,4a‐diaza‐s‐indacene (BODIPY) were synthesized via a Sonogashira coupling. Compared to the parent BODIPY the absorption and fluorescence spectrum were for both compounds broader and redshifted. The redshift of the fluorescence and the decrease of the fluorescence quantum yield and decay time upon increasing solvent polarity were attributed to the formation of a partial charge‐transfer state. Upon excitation in the ICZ absorption band the ICZ fluorescence was quenched in both compounds mainly due to energy transfer to the BODIPY moiety. In a similar ICZ–π–DPP polymer (where DPP is diketopyrrolopyrrole), a smaller redshift of the absorption and fluorescence spectra compared to the parent DPP was observed. A less efficient quenching of the ICZ fluorescence in the ICZ–π–DPP polymer could be related to the unfavorable orientation of the transition dipoles of ICZ and DPP. The rate constant for energy transfer was for all compounds an order of magnitude smaller than predicted by Förster theory. While in a solid film of the triad a further redshift of the absorption maximum of nearly 100 nm was observed, no such shift was observed for the ICZ–π–BODIPY polymer.     

Covalent Organic Framework (COF‐1) under High Pressure

COF‐1 has a structure with rigid 2D layers composed of benzene and B₃O₃ rings and weak van der Waals bonding between the layers. The as‐synthesized COF‐1 structure contains pores occupied by solvent molecules. A high surface area empty‐pore structure is obtained after vacuum annealing. High‐pressure XRD and Raman experiments with mesitylene‐filled (COF‐1‐M) and empty‐pore COF‐1 demonstrate partial amorphization and collapse of the framework structure above 12–15 GPa. The ambient pressure structure of COF‐1‐M can be reversibly recovered after compression up to 10–15 GPa. Remarkable stability of highly porous COF‐1 structure at pressures at least up to 10 GPa is found even for the empty‐pore structure. The bulk modulus of the COF‐1 structure (11.2(5) GPa) and linear incompressibilities (k_[100]=111(5) GPa, k_[001]=15.0(5) GPa) were evaluated from the analysis of XRD data and cross‐checked against first‐principles calculations.     

Highly Fluorescent and Water‐Soluble Diketopyrrolopyrrole Dyes for Bioconjugation

The preparation of highly water‐soluble and strongly fluorescent diketopyrrolopyrrole (DPP) dyes using an unusual taurine‐like sulfonated linker has been achieved. Exchanging a phenyl for a thienyl substituent shifts the emission wavelength to near λ=600 nm. The free carboxylic acid group present in these new derivatives was readily activated and the dyes were subsequently covalently linked to a model protein (bovine serum albumin; BSA). The bioconjugates were characterized by electronic absorption, fluorescence spectroscopy and MALDI‐TOF mass spectrometry, thus enabling precise determination of the labeling density (ratio DPP/BSA about 3 to 8). Outstanding values of fluorescence quantum yield (30 % to 59 %) for these bioconjugates are obtained. The photostability of these DPP dyes is considerably greater than that of fluorescein under the same irradiation conditions. Remarkably low detection limits between 80 and 300 molecules/μm² were found for the BSA bioconjugates by fluorescence imaging with a epifluorescence microscope.     

Precision Construction of 2D Heteropore Covalent Organic Frameworks by a Multiple‐Linking‐Site Strategy

Integrating different kinds of pores into one covalent organic framework (COF) endows it with hierarchical porosity and thus generates a member of a new class of COFs, namely, heteropore COFs. Whereas the construction of COFs with homoporosity has already been well developed, the fabrication of heteropore COFs still faces great challenges. Although two strategies have recently been developed to successfully construct heteropore COFs from noncyclic building blocks, they suffer from the generation of COF isomers, which decreases the predictability and controllability of construction of this type of reticular materials. In this work, this drawback was overcome by a multiple‐linking‐site strategy that offers precision construction of heteropore COFs containing two kinds of hexagonal pores with different shapes and sizes. This strategy was developed by designing a building block in which double linking sites are introduced at each branch of a C₃‐symmetric skeleton, the most widely used scaffold to construct COFs with homogeneous porosity. This design provides a general way to precisely construct heteropore COFs without formation of isomers. Furthermore, the as‐prepared heteropore COFs have hollow‐spherical morphology, which has rarely been observed for COFs, and an uncommon staggered AB stacking was observed for the layers of the 2D heteropore COFs.     

High‐Flux Membranes Based on the Covalent Organic Framework COF‐LZU1 for Selective Dye Separation by Nanofiltration

Covalent organic frameworks (COFs) are attractive candidates for advanced water‐treatment membranes owing to their high porosity and well‐organized channel structures. Herein, the continuous two‐dimensional imine‐linked COF‐LZU1 membrane with a thickness of only 400 nm was prepared on alumina tubes by in situ solvothermal synthesis. The membrane shows excellent water permeance (ca. 760 L m^?2 h^?1 MPa^?1) and favorable rejection rates exceeding 90 % for water‐soluble dyes larger than 1.2 nm. The water permeance through the COF‐LZU1 membrane is much higher than that of most membranes with similar rejection rates. Long‐time operation demonstrates the outstanding stability of the COF‐LZU1 membrane. As the membrane has no selectivity for hydrated salt ions (selectivity <12 %), it is also suitable for the purification of dye products from saline solutions. The excellent performance and the outstanding water stability render the COF‐LZU1 membrane an interesting system for water purification.     

Electronic Structure of a Semiconducting Imine‐Covalent Organic Framework

Imine COF (covalent organic framework) based on the Schiff base reaction between p‐phenylenediamine (PDA) and benzene‐1,3,5‐tricarboxaldehyde (TCA) was prepared on the HOPG‐air (air=humid N₂) interface and characterized using different probe microscopies. The role of the molar ratio of TCA and PDA has been explored, and smooth domains of imine COF up to a few μm are formed for a high TCA ratio (>2) compared to PDA. It is also observed that the microscopic roughness of imine COF is strongly influenced by the presence of water (in the reaction chamber) during the Schiff base reaction. The electronic property of imine COF obtained by tunneling spectroscopy and dispersion corrected density functional theory (DFT) calculation are comparable and show semiconducting nature with a band gap of ≈1.8 eV. Further, we show that the frontier orbitals are delocalized entirely over the framework of imine COF. The calculated cohesive energy shows that the stability of imine COF is comparable to that of graphene.     

Fully Conjugated Two‐Dimensional sp2‐Carbon Covalent Organic Frameworks as Artificial Photosystem I with High Efficiency

The synthesis of fully conjugated sp²‐carbon covalent organic frameworks (COF) is extremely challenging given the difficulty of the formation of very stable carbon‐carbon double bonds (‐C=C‐). Here, we report the successful preparation of a 2D COF (TP‐COF) based on triazine as central planar units bridged by sp²‐carbon linkers through the ‐C=C‐ condensation reaction. High‐resolution‐transmission electron microscopy (HRTEM) clearly confirmed the tessellated hexagonal pore structure with a pore center‐to‐center distance of 2 nm. Powder X‐ray diffraction (PXRD) together with structural simulations revealed an AA stacking mode of the obtained layered structure. TP‐COF turned out to be an excellent semiconductor material with a LUMO energy of ?3.23 eV and a band gap of 2.36 eV. Excitingly, this novel sp²‐carbon conjugated TP‐COF exhibited unprecedented coenzyme regeneration efficiency and can significantly boost the coenzyme‐assisted synthesis of l ‐glutamate to a record‐breaking 97 % yield within 12 minutes.