Single‐Atom Iron Boosts Electrochemiluminescence

The traditional luminol–H₂O₂ electrochemiluminescence (ECL) sensing platform suffers from self‐decomposition of H₂O₂ at room temperature, hampering its application for quantitative analysis. In this work, for the first time we employ iron single‐atom catalysts (Fe‐N‐C SACs) as an advanced co‐reactant accelerator to directly reduce the dissolved oxygen (O₂) to reactive oxygen species (ROS). Owing to the unique electronic structure and catalytic activity of Fe‐N‐C SACs, large amounts of ROS are efficiently produced, which then react with the luminol anion radical and significantly amplify the luminol ECL emission. Under the optimum conditions, a Fe‐N‐C SACs–luminol ECL sensor for antioxidant capacity measurement was developed with a good linear range from 0.8 μm to 1.0 mm of Trolox.     

Blue Electrogenerated Chemiluminescence from Water‐Soluble Iridium Complexes Containing Sulfonated Phenylpyridine or Tetraethylene Glycol Derivatized Triazolylpyridine Ligands

Incorporating phenylpyridine‐ and triazolylpyridine‐based ligands decorated with methylsulfonate or tetraethylene glycol (TEG) groups, a series of iridium(III) complexes has been created for green and blue electrogenerated chemiluminescence under analytically useful aqueous conditions, with tri‐n‐propylamine as a coreactant. The relative electrochemiluminescence (ECL) intensities of the complexes were dependent on the sensitivity of the photodetector over the wavelength range and the pulse time of the applied electrochemical potential. In terms of the integrated area of corrected ECL spectra, with a pulse time of 0.5 s, the intensities of the Ir^III complexes were between 18 and 102 % that of [Ru(bpy)₃]²⁺ (bpy=2,2′‐bipyridine). However, when the intensities were measured with a typical bialkali photomultiplier tube, the signal of the most effective blue emitter, [Ir(df‐ppy)₂(pt‐TEG)]⁺ (df‐ppy=2‐(2,4‐difluorophenyl)pyridine anion, pt‐TEG=1‐(2‐(2‐(2‐(2‐hydroxyethoxy)ethoxy)ethoxy)ethyl)‐4‐(2‐pyridyl)‐1,2,3‐triazole), was over 1200 % that of the orange–red emitter [Ru(bpy)₃]²⁺. A combined experimental and theoretical investigation of the electrochemical and spectroscopic properties of the Ir^III complexes indicated that the greater intensity from [Ir(df‐ppy)₂(pt‐TEG)]⁺ relative to those of the other Ir^III complexes resulted from a combination of many factors, rather than being significantly favored in one area.     

Enhanced Iridium Complex Electrochemiluminescence Cytosensing and Dynamic Evaluation of Cell‐Surface Carbohydrate Expression

A newly prepared [(ppy)₂Ir(dcbpy)]⁺?PF₆^? (ppy: 2‐phenylpyridyl; dcbpy: 4,4′‐dicarboxy‐2,2′‐bipyridyl) and gold nanoparticle functionalized mesoporous silica nanoparticle (Au/Ir‐MSN) is reported. Based on the binding between concanavalin A (Con A) and mannose, the novel nanoparticle was applied to an ultrasensitive electrochemiluminescence (ECL) in situ cytosensing strategy and the dynamic evaluation of cell‐surface carbohydrate expression. The ECL activity of the presented Con A@Au/Ir‐MSN nanoprobe was greatly enhanced by employing a functionalized nanoparticle and graphene nanomaterial with an increased surface area and simultaneously improved electron‐transfer efficiency at the electrode interface. Under optimal conditions, the sandwich‐type ECL cytosensor showed a linear response to K562 cells at concentrations ranging from 1.0×10² to 1.0×10⁶ cells mL^?1 and realized a low detection limit of a single cell. The proposed method could also be successfully used for monitoring the dynamic variation of carbohydrate expression in cancer cells in response to external stimulation by an inhibitor.     

Water‐Soluble Conjugated Polymers for Fluorescent‐Enzyme Assays

Enzyme assays are receiving more and more research and application interest because of the rapidly increasing demands of clinical diagnosis, environmental analysis, drug discovery, and molecular biology. Water‐soluble light‐harvesting conjugated polymers (CPs) coordinate the action of a large number of absorbing units to afford an amplified fluorescence signal, which makes them useful as optical platforms in highly sensitive chemical and biological sensors. This Feature Article highlights recent developments of water‐soluble CPs for fluorescent assays of enzymes. Different signal transduction mechanisms, such as electron transfer, fluorescence resonance energy transfer (FRET), and aggregation or conformation changes of CPs, are employed in these assays according to the dissimilar nature of enzymes. Potential challenges and future research directions in these approaches based on CPs are also discussed.

     

Synthesis and Characterization of a Water‐Soluble Carboxylated Polyfluorene and Its Fluorescence Quenching by Cationic Quenchers and Proteins

We have developed a new intermediate monomer, 2,7‐[bis(4,4,5,5‐tetramethyl‐1,3,2‐dioxaborolan‐2‐yl)‐9,9‐bis(3‐(tert‐butyl propanoate))]fluorene, that allows the easy synthesis of water‐soluble carboxylated polyfluorenes. As an example, poly[9,9′‐bis(3′′‐propanoate)fluoren‐2,7‐yl] sodium salt was synthesized by the Suzuki coupling reaction, and the properties of the polymer were studied in aqueous solutions of different pH. Fluorescence quenching of the polymer by different cationic quenchers (MV²⁺, MV⁴⁺, and NO₂MV²⁺; MV=methyl viologen) was studied, and the quenching constants were found to be dependent on the charge and electron affinity of the quencher molecule and the pH of the medium. The largest quenching constant was observed to be 1.39×10⁸ M ^?1 for NO₂MV²⁺ at pH 7. The change in polymer fluorescence upon interaction with different proteins was also studied. Strong fluorescence quenching of the polymer was observed in the presence of cytochrome c, whereas weak quenching was observed in the presence of myoglobin and bovine serum albumin. Lysozyme quenched the polymer emission at low protein concentrations, and the quenching became saturated at high protein concentrations. Under similar experimental conditions, the polymer showed improved quenching efficiencies toward cationic quenchers and a more selective response to proteins relative to other carboxylated conjugated polymers.     

The Sensitized Solid‐Phase Electrochemiluminescence of Electrodeposited Poly‐Luminol/Aniline on AuAg/TiO2 Nanohybrid Functionalized Electrode for Flow Injection Analysis

In this study, a copolymer of luminol with aniline is electrochemically deposited onto the AuAg/TiO₂ nanohybrid functionalized indium tin oxide coated glass. It is used as a reagentless electrochemiluminescent (ECL) electrode for flow‐injection‐analysis (FIA). The properties of this solid phase ECL electrode are characterized by cyclic voltammetry, electrochemical impedance spectroscopy and scanning electron microscopy etc. It has stronger ECL emission, sensitive response for target analytes and excellent stability. The so‐prepared ECL electrode shows sensitive response to reactive oxygen species thereafter to be applied for determination of hydrogen peroxide with FIA mode. Under optimized conditions, a mass detection limit of 0.822 pg of hydrogen peroxide was obtained. Thus the hydrogen peroxide residues in samples were detected with satisfactory result.     

Dual Enhancement of Gold Nanocluster Electrochemiluminescence: Electrocatalytic Excitation and Aggregation‐Induced Emission

Ligand‐protected gold nanoclusters (AuNCs) have emerged as a new class of electrochemiluminescence (ECL) luminophores for their interesting catalytic and emission properties, although their quantum yield (Φ_ECL) in aqueous medium is low with a poor mechanistic understanding of the ECL process. Now it is shown that drying AuNCs on electrodes enabled both enhanced electrochemical excitation by an electrocatalytic effect, and enhanced emission by aggregation‐induced ECL (AIECL) for 6‐aza‐2‐thiothymine (ATT) protected AuNCs with triethylamine (TEA) as a coreactant. The dried ATT‐AuNCs/TEA system resulted in highly stable visual ECL with a Φ_ECL of 78 %, and a similar enhancement was also achieved with methionine‐capped AuNCs. The drying enabled dual‐enhancement mechanism has solved a challenging mechanistic problem for AuNC ECL probes, and can guide further rational design of ECL emitters.     

Photoswitchable and Water‐Soluble Fluorescent Nano‐Aggregates Based on a Diarylethene–Dansyl Dyad and Liposome

In this work, a unique approach is developed to generate photoswitchable and water‐soluble fluorescent nano‐aggregates. Initially, a new light‐controlled diarylethene–dansyl dyad DAE 1 is formed by linking two dansyl fluorophores covalently to a symmetrical dithienylethene backbone, whose photophysical properties can be reversibly switched by optical stimuli. Subsequently, the water insolubility of the molecular switch 1 is overcome by incorporating it into the bilayer of liposome DPPC (1,2‐dihexadecanoyl‐sn ‐glycero‐3‐phosphocholine) in water. This strategy creates stable fluorescent nano‐aggregates OF‐1@DPPC (≈25 nm diameter) that are soluble in an aqueous medium. The nano‐aggregates OF‐1@DPPC retain and even improve the photoswitchable fluorescence properties of DAE 1 . More importantly, OF‐1@DPPC exhibits a remarkable photostability and fatigue resistance after 5 cycles of irradiation with UV and visible light, which is crucial for its practical application.     

Electroactive Metal–Organic Frameworks as Emitters for Self‐Enhanced Electrochemiluminescence in Aqueous Medium

Metal–organic frameworks (MOFs) have limited applications in electrochemistry owing to their poor conductivity. Now, an electroactive MOF (E‐MOF) is designed as a highly crystallized electrochemiluminescence (ECL) emitter in aqueous medium. The E‐MOF contains mixed ligands of hydroquinone and phenanthroline as oxidative and reductive couples, respectively. E‐MOFs demonstrate excellent performance with surface state model in both co‐reactant and annihilation ECL in aqueous medium. Compared with the individual components, E‐MOFs significantly improve the ECL emission due to the framework structure. The self‐enhanced ECL emission with high stability is realized by the accumulation of MOF cation radicals via pre‐reduction electrolysis. The self‐enhanced mechanism is theoretically identified by DFT. The mixed‐ligand E‐MOFs provide a proof of concept using molecular crystalline materials as new ECL emitters for fundamental mechanism studies.     

Synthesis of Water‐Soluble Dendritic Conjugated Polymers for Fluorescent DNA Assays

Summary: Cationic water‐soluble dendritic poly(fluorene)s with positively charged amines on the exterior (PFP‐G_0–2) can be prepared by a macromonomer (generation‐by‐generation) approach. The charge densities of PFP‐G_0–2 can control their distances to DNA by electrostatic interactions. The PFP‐G₂ with higher generation of dendritic side chains possesses a higher charge density, and gives rise to efficient fluorescence resonance energy transfer (FRET) to a signaling fluorescein labeled at the terminus of DNA. These new conjugated polymers form less aggregates and yield more efficient FRET in a tetrahydrofuran/H₂O mixed solvent as compared to in pure water. The sensitivity of the DNA sensor is improved by utilizing highly dendritic conjugated polymers.

Structure of the dendritic conjugated polymer PFP‐G₂.     

Formation of Surface Traps on Quantum Dots by Bidentate Chelation and Their Application in Low‐Potential Electrochemiluminescent Biosensing

Bidentate chelation, meso‐2,3‐dimercaptosuccinic acid (DMSA), was used as a stabilizer for the synthesis of CdTe quantum dots (QDs). The bidentate chelate QDs, characterized with FT‐IR, PL, and UV/Vis spectroscopy; element analysis; and high‐resolution transmission electron microscope, exhibited surface traps due to the large surface/volume ratio of QD particle and the steric hindrance of the DMSA molecule. The unpassivated surface of the QDs produced a narrower band gap than the core and electrochemiluminescent (ECL) emission at relatively low cathodic potential. In air‐saturated pH 7.0 buffer, the QDs immobilized on electrode surface showed an intense ECL emission peak at ?0.85 V (vs. Ag/AgCl). H₂O₂ produced from electrochemical reduction of dissolved oxygen was demonstrated to be the co‐reactant, which avoided the need of strong oxidant as the co‐reactant and produced a sensitive analytical method for peroxidase‐related analytes. Using hydroquinone/horseradish peroxidase/H₂O₂ as a model system, a new, reagentless, phenolic, ECL biosensor for hydroquinone was constructed, based on the quenching effect of ECL emission of QDs by consumption of co‐reactant H₂O₂. The biosensor showed a linear range of 0.2–10 μM with acceptable stability and reproducibility. This work opens new avenues in the search for new ECL emitters with excellent analytical performance and makes QDs a more attractive alternative in biosensing.     

Controlled Release of a Sparingly Water‐Soluble Anticancer Drug through pH‐Responsive Functionalized Gold‐Nanoparticle‐Decorated Liposomes

The binding and detachment of carboxyl‐modified gold nanoparticles from liposomes is used for controlled drug delivery. This study reveals that the binding and detachment of nanoparticles from liposomes depends on the degree of hydration of the liposomes. Liposomes with a lower hydration level undergo stronger electrostatic interactions with negatively charged gold nanoparticles, thus leading to a slower detachment of the carboxyl‐modified gold nanoparticles under gastric conditions. Therefore, under gastric conditions, gold‐nanoparticle‐decorated dipalmitoylphosphatidylcholine (DPPC) liposomes exhibit an at least ten‐times‐slower drug release compared to gold‐nanoparticle‐decorated 1,2‐dimyristoyl‐sn‐glycero‐3‐phosphocholine (DMPC) liposomes, although both liposomes in the bare state fail to pursue controlled release. Our study also reveals that one can modulate the drug‐release rate by simply varying the concentration of nanoparticles. This study highlights a novel strategy for the controlled release of drug molecules from liposomes.     

Image‐Contrast Technology Based on the Electrochemiluminescence of Porous Silicon and Its Application in Fingerprint Visualization

The electrochemiluminescence (ECL) of porous silicon (pSi) has attracted great interest for its potential application in display technology and chemical sensors. In this study, we found that pSi with a different surface chemistry displayed an apparently different dynamic ECL process. An image‐contrast technology was established on the basis of the intrinsic mechanism of the ECL dynamic process. As a proof of principle, the visualization of latent fingerprints (LFPs) and in situ detection of TNT in fingerprints was demonstrated by using the ECL‐based image‐contrast technology.     

Synthesis and Characterization of Water‐Soluble Conjugated Glycopolymer for Fluorescent Sensing of Concanavalin A

A neutral polyfluorene derivative that contains 20 mol % 2,1,3‐benzothiadiazole (BT) is synthesized by Suzuki cross‐coupling polymerization. A cationic conjugated polymer A and an α‐mannose‐bearing polymer B are subsequently obtained through different post‐polymerization methods. As a result of the charged pendant groups or sugar‐bearing groups attached to the polymer side chains, both A and B show good water‐solubility. The titration of Concanavalin A (Con A) into polymer aqueous solution leads to different fluorescent responses for polymers A and B . Polymer A does not show any obvious fluorescence change upon interaction with Con A, whereas polymer B shows fluorescence increase in BT emission intensity when Con A is added. This is because of the specific interaction between α‐mannose and Con A, which induces polymer aggregation, and then facilitates energy transfer from the phenylene–fluorene segments to the BT units. A practical calibration curve ranging from 1 nM to 250 nM is obtained by correlating the changes in BT emission intensity with Con A concentration. The advantage of polymer B ‐based Con A macromolecular probe is that it shows signal increase upon Con A recognition, which is significantly different from other conjugated polymer‐based fluorescence quenching assays.     

New Water‐Soluble Cationic Poly(p‐phenylenevinylene) Derivative: the Interaction with DNA and Selective Fluorescence Enhancement Induced by ssDNA

A new cationic cyano‐substituted poly(p‐phenylenevinylene) (N‐CNPPV) is synthesized by Knoevenagel condensation. The water‐soluble polymer shows different emission spectra in different solvents and displays unique fluorescent behaviors in the mixed solvents of water and THF. The new polymer can form a complex with ssDNA by adopting a more planar conformation, exhibiting red shift of emission wavelength and enhancement of fluorescence intensity. By investigating the fluorescent response of N‐CNPPV to various surfactants, we demonstrate that the hydrophobic interaction and electrostatic interaction result in the selective response of N‐CNPPV to ssDNA. This is the first report on selective fluorescence enhancement of conjugated polyelectrolyte induced by ssDNA.     

Water‐Soluble Fluorescent Probes for Selective Recognition of Lysine and Its Application in an Object Carry‐and‐Release System

A water‐soluble fluorescent probe PEG‐TPA‐5′ was synthesized, which shows an excellent selectivity to detect Lys in aqueous phase. An object carry‐and‐release system is established by applying PEG‐TPA‐5′ as carrier and Lys as chemical stimulating source.     

Novel Water‐Soluble Shape‐Regulatable Luminescent Nanoparticles by Non‐Covalently Bonded Self‐Assembly

Summary: Novel non‐covalently connected water‐soluble nanoparticles that contain poly(fluorene‐co‐phenylene) with hydroxy‐capped alkoxy side chains (PF3BOH) and poly(acrylic acid) (PAA) have been obtained and characterized. With different proportions of PF3BOH and PAA, the shape and size of the nanoparticles can be regulated. The nanoparticles are quite stable in water with no precipitate being observed after weeks. Transmission electron microscopy and dynamic laser light scattering are used to confirm the morphology of the PF3BOH/PAA nanoparticles. Their optical properties have been investigated and show similar optoelectronic properties to a PF3BOH solid film although they do not undergo aggregation.

TEM images of the nanoparticles obtained upon varying the PAA/PF3BOH content.     

Electrochemiluminescence Sensor for Selective Preconcentration and Sensitive Detection of Napropamide Using Water‐Soluble Sulfonated Graphene

A novel electrochemiluminescence (ECL) sensor for napropamide determination was prepared using the water‐soluble sulfonated graphene (sulfonated‐G) as solid‐phase microextraction (SPME) material, based on selective preconcentration of target onto an electrode and followed by luminol ECL detection. The effects of pH, adsorption time, buffer solution and the luminescence agent on ECL intensity were optimized. Under the optimized conditions (pH 6; adsorption time 5 min; buffer solution pH 11.0 Na₂CO₃ aHCO₃; luminescence agent luminol; stirring speed 400 rpm), the lowest detection limits (1.0 µg L⁻¹) and good linear range (r²≥0.99) were obtained for the analyte, indicating the superior performance of Nafion/sulfonated‐G/GCE for detecting napropamide.