Rolf Huisgen's Classic Studies of Cyclic Triene Diels–Alder Reactions Elaborated by Modern Computational Analysis

Rolf Huisgen explored the Diels–Alder reactions of 1,3,5‐cycloheptatriene (CHT) and cyclooctatetraene (COT) with the dienophiles maleic anhydride and 4‐phenyl‐1,2,4‐triazoline‐3,5‐dione (PTAD) to determine the kinetics and mechanisms of various electrocyclizations and Diels–Alder reactions. These reactions have been examined with density functional theory. Modern computational chemistry has provided information not previously available by experiment. Transition states for all the reactions have been identified, and their Gibbs energies are used to explain the experimental reactivities. Zwitterionic intermediates were not found in the [4+2] cycloadditions of both CHT or COT with PTAD and are thus not involved in these reactions. [2+2+2] cycloadditions, as an alternative path to the Diels–Alder products, are highly disfavored. Rapid double nitrogen inversion was found for the cycloaddition products with PTAD.     

Synthesis and Properties of Azoles and Their Derivatives. Part 70. Nitroallylic Systems in [2 + 3] Cycloaddition Reactions with Nitrones: A DFT Computational Study

The analysis of electrophilicity indexes and the results of potential energy surface (PES) simulations for the reaction pathways proved that the [2 + 3] cycloadditions of nitroallylic systems with nitrones should be considered nonpolar reactions. Our simulations proved that the reactions always proceed via a one‐step mechanism through a prereaction complex. Although the symmetry of respective transition states is quite varied, their polarity is low and does not change when a polar medium is introduced to the reaction environment. When the polarity of the reaction medium increases, the kinetic pathway preference does not change. The regiochemistry of the cycloadditions tested may, however, be controlled to some extent by steric effects.     

Visible‐Light Photocatalysis: Does It Make a Difference in Organic Synthesis?

Visible‐light photocatalysis has evolved over the last decade into a widely used method in organic synthesis. Photocatalytic variants have been reported for many important transformations, such as cross‐coupling reactions, α‐amino functionalizations, cycloadditions, ATRA reactions, or fluorinations. To help chemists select photocatalytic methods for their synthesis, we compare in this Review classical and photocatalytic procedures for selected classes of reactions and highlight their advantages and limitations. In many cases, the photocatalytic reactions proceed under milder reaction conditions, typically at room temperature, and stoichiometric reagents are replaced by simple oxidants or reductants, such as air, oxygen, or amines. Does visible‐light photocatalysis make a difference in organic synthesis? The prospect of shuttling electrons back and forth to substrates and intermediates or to selectively transfer energy through a visible‐light‐absorbing photocatalyst holds the promise to improve current procedures in radical chemistry and to open up new avenues by accessing reactive species hitherto unknown, especially by merging photocatalysis with organo‐ or metal catalysis.     

Concerted vs stepwise mechanisms in dehydro-Diels-Alder reactions

The Diels-Alder reaction is not limited to 1,3-dienes. Many cycloadditions of enynes and a smaller number of examples with 1,3-diynes have been reported. These "dehydro"-Diels-Alder cycloadditions are one class of dehydropericyclic reactions which have long been used to generate strained cyclic allenes and other novel structures. CCSD(T)//M05-2X computational results are reported for the cycloadditions of vinylacetylene and butadiyne with ethylene and acetylene. Both concerted and stepwise diradical routes have been explored for each reaction, with location of relevant stationary points. Relative to 1,3-dienes, replacement of one double bond by a triple bond adds 6-6.5 kcal/mol to the activation barrier; a second triple bond adds 4.3-4.5 kcal/mol to the barrier. Product strain decreases the predicted exothermicity. In every case, a concerted reaction is favored energetically. The difference between concerted and stepwise reactions is 5.2-6.6 kcal/mol for enynes but diminishes to 0.5-2 kcal/mol for diynes. Experimental studies on intramolecular diyne + ene cycloadditions show two distinct reaction pathways, providing evidence for competing concerted and stepwise mechanisms. Diyne + yne cycloadditions connect with arynes and ethynyl-1,3-cyclobutadiene. This potential energy surface appears to be flat, with only a minute advantage for a concerted process; many diyne cycloadditions or aryne cycloreversions will proceed by a stepwise mechanism.     

Iridium Catalyzed Carbocyclizations: Efficient (5+2) Cycloadditions of Vinylcyclopropanes and Alkynes

Third‐row transition metal catalysts remain a largely untapped resource in cycloaddition reactions for the formation of medium‐sized rings. Herein, we report the first examples of iridium‐catalyzed inter‐ and intramolecular vinylcyclopropane (VCP)–alkyne (5+2) cycloadditions. DFT modeling suggests that catalysis by iridium(I) proceeds through a mechanism similar to that previously reported for rhodium(I)‐catalyzed VCP–alkyne cycloadditions, but a smaller free energy span for iridium enables substantially faster catalysis under favorable conditions. The system is characterized by up to quantitative yields and is amenable to an array of disubstituted alkynes and vinylcyclopropanes.     

A Full Regioselective and Stereoselective Synthesis of 4‐Nitroisoxazolidines via Stepwise [3 + 2] Cycloaddition Reactions between (Z)‐C‐(9‐Anthryl)‐N‐arylnitrones and (E)‐3,3,3‐Trichloro‐1‐nitroprop‐1‐ene: Comprehensive Experimental and Theoretical Study

In the contrast to all known [3 + 2] cycloadditions between nitrones and conjugated nitroalkenes, reactions of (E )‐3,3,3‐trichloro‐1‐nitroprop‐1‐ene with (Z )‐C ‐(9‐anthryl)‐N ‐arylnitrones are proceeding in a fully regioselective and stereoselective manner. Additionally, density functional theory calculations suggest stepwise, zwitterionic mechanism of these cycloadditions.     

Potassium Acyltrifluoroborate (KAT) Ligations are Orthogonal to Thiol‐Michael and SPAAC Reactions: Covalent Dual Immobilization of Proteins onto Synthetic PEG Hydrogels

The covalent immobilization of peptides, proteins, and other biomolecules to hydrogels provides a biologically mimicking environment for cell and tissue growth. Bioorthogonal chemical reactions can serve as a tool for this, but the paucity of such reactions and mutual incompatibilities limits the number of distinct molecules that can be introduced. We now report that the potassium acyltrifluoroborate (KAT ) amide‐forming ligation is orthogonal to both thiol‐Michael and strain promoted azide alkyne cycloadditions (SPAAC ) and the requisite functional groups – KAT s and hydroxylamines – are stable and compatible to hydrogel formation, protein modification, and post‐assembly immobilization of biomolecules onto hydrogels. In combination these ligations enables stepwise covalent protein immobilization of multiple BSA ‐derivatives onto the hydrogel scaffold regardless of the order of addition.     

Gold‐Catalyzed Formal [4+1]/[4+3] Cycloadditions of Diazo Esters with Triazines

Reported herein is the unprecedented gold‐catalyzed formal [4+1]/[4+3] cycloadditions of diazo esters with hexahydro‐1,3,4‐triazines, thus providing five‐ and seven‐membered heterocycles in moderate to high yields under mild reaction conditions. These reactions feature the use of a gold complex to accomplish the diverse annulations and the first example of the involvement of a gold metallo‐enolcarbene in a cycloaddition. It is also the first utilization of stable triazines as formal dipolar adducts in the carbene‐involved cycloadditions. Mechanistic investigations reveal that the triazines reacted directly, rather than as formaldimine precursors, in the reaction process.     

1,3‐Dipolar Cycloadditions of Ethyl 2‐Diazo‐3,3,3‐trifluoropropanoate to Alkynes and [1,5] Sigmatropic Rearrangements of the Resulting 3H‐Pyrazoles: Synthesis of Mono‐, Bis‐ and Tris(trifluoromethyl)‐Substituted Pyrazoles

The 1,3‐dipolar cycloadditions of ethyl 2‐diazo‐3,3,3‐trifluoropropanoate with electron‐rich and electron‐deficient alkynes, as well as the van Alphen? Hüttel rearrangements of the resulting 3H‐pyrazoles were investigated. These reactions led to a series of CF₃‐substituted pyrazoles in good overall yields. Phenyl‐ and diphenylacetylene proved to be unreactive, but, at high temperature, the diazoalkane and phenylacetylene furnished a cyclopropene derivative. As expected, the 1,3‐dipolar cycloaddition to the ynamine occurred much faster than those to electron‐deficient alkynes. With one exception, all cycloadditions proceeded with excellent regioselectivities. The [1,5] sigmatropic rearrangement of the primary 3H‐pyrazoles provided products with shifted acyl groups; products resulting from the migration of a CF₃ group were not detected. In agreement with literature reports, this rearrangement occurs faster with 3H‐pyrazoles bearing electron‐withdrawing substituents.     

Cycloaddition Reactions of Butadiene and 1,3‐Dipoles to Curved Arenes,Fullerenes, and Nanotubes: Theoretical Evaluation of the Role of Distortion Energies on Activation Barriers

Diels–Alder cycloadditions of butadiene and 1,3‐dipolar cycloadditions of azomethine ylide, fulminic acid, and the parent nitrone to polyacenes, fullerenes, and nanotubes have been investigated with density functional theory and ONIOM methods. Activation barriers obtained for cycloaddition reactions on planar and curved systems have been shown to be highly correlated to the energy needed to distort the reactants to the geometry of the transition state (TS).     

氧杂环丁烷的扩环反应

氧杂环丁烷是一类重要的小杂环化合物,也是重要有机合成中间体,在有机化学、药物化学和高分子化学中都有广泛的应用.作为具有较大环张力的小杂环化合物,氧杂环丁烷类化合物除可以发生开环反应外,也很容易发生扩环反应,构建含氧普通环到大环化合物.主要总结了氧杂环丁烷的扩环反应,包括重氮化合物作为卡宾前体与氧杂环丁烷的扩环反应、金属...     

Density functional theory study of the regio‐ and stereoselectivity of diels–alder reactions of 5‐Aryl‐2‐pyrones

A theoretical study of the mechanism and regio‐ and stereoselectivity of Diels–Alder reactions of 5‐aryl‐2‐pyrones (Ar = Ph, 4‐(MeS)‐Ph) with substituted alkenes (CHZ = CH₂, Z = COMe, OAc) is performed at the B3LYP/6‐31G(d) level. The analysis of the relevant stationary points of the potential energy surface and intrinsic reaction coordinate calculations show that these cycloadditions are undergoing through asynchronous concerted mechanisms yielding to the formation of the 5‐endo isomers as the major cycloadducts. The calculation of activation and reaction energies indicates that the 5‐endo cycloadducts are favored both kinetically and thermodynamically. The obtained results are in good agreement with experimental outcomes. © 2011 Wiley Periodicals, Inc. Int J Quantum Chem, 2011     

The Relationship of Cycloaddition Reactions to Spontaneous Vinyl Polymerizations

The zwitterionic–biradical tetramethylene proposed by Huisgen as the key intermediate in stepwise [2+2] cycloaddition reactions has been shown to be the crucial intermediate in spontaneous vinyl polymerizations as well. Predominantly biradical tetramethylenes initiate free‐radical copolymerizations, while predominantly zwitterionic tetramethylenes initiate cationic or anionic homopolymerizations. Stepwise cycloaddition is viewed as a spontaneous polymerization lacking a propagation step. These tendencies could be correlated in the form of an ‘organic chemist's Periodic Table’, which has recently been put on a quantitative basis. Huisgen also showed experimentally that [4+2] Woodward–Hoffman‐allowed cycloadditions are completely concerted. Spontaneous copolymerizations accompanying these cycloadditions, therefore, were ascribed to the s‐trans diene form. This concept was given support by kinetics studies, as well as by exclusive cycloaddition from s‐cis cyclopentadiene, and exclusive copolymerization from s‐trans verbenene.     

Boronic Acid Catalysis for Mild and Selective [3+2] Dipolar Cycloadditions to Unsaturated Carboxylic Acids

Herein, the concept of boronic acid catalysis (BAC) for the activation of unsaturated carboxylic acids is applied in several classic dipolar [3+2] cycloadditions involving azides, nitrile oxides, and nitrones as partners. These cycloadditions can be used to produce pharmaceutically interesting, small heterocyclic products, such as triazoles, isoxazoles, and isoxazolidines. These cycloadducts are formed directly and include a free carboxylic acid functionality that can be employed for further transformations, thereby avoiding prior masking or functionalization. In all cases, BAC provides faster reactions, under milder conditions, with much improved product yields and regioselectivities. In some instances, such as triazole formation from the reaction of azides with 2‐alkynoic acids, catalysis with ortho‐nitrophenylboronic acid circumvents the undesirable product decarboxylation observed when using thermal activation. By using NMR spectroscopic studies, the boronic acid catalyst was shown to provide activation by a LUMO‐lowering effect in the unsaturated carboxylic acid, likely via a monoacylated hemiboronic ester intermediate.     

Amine‐Catalyzed Enantioselective 1,3‐Dipolar Cycloadditions of Aldehydes to C,N‐Cyclic Azomethine Imines

Amine‐catalyzed enantioselective 1,3‐dipolar cycloadditions of aldehydes to C,N‐cyclic azomethine imines were developed. The reactions between diversely substituted C,N‐cyclic azomethine imines and aldehydes proceeded smoothly in the presence of chiral prolinol silyl ether catalyst and gave the C‐1‐substituted tetrahydroisoquinolines in a highly stereoselective manner. These tetrahydroisoquinolines could be efficiently transformed to several other useful polycyclic frameworks.     

1,4‐Cyclohexadienes—Easy Access to a Versatile Building Block via Transition‐Metal‐Catalysed Diels–Alder Reactions

1,4‐Cyclohexadiene derivatives are easily accessed via transition‐metal cycloadditions of 1,3‐dienes with alkynes. The mild reaction conditions of several transition‐metal‐catalysed reactions allows the incorporation of various functional groups to access functionalised 1,4‐cyclohexadienes. The control of the regiochemistry in the intermolecular cobalt‐catalysed Diels–Alder reaction is realised utilising different ligand designs. The functionalised 1,4‐cyclohexadiene derivatives are valuable building blocks in follow‐up transformations. Finally, the oxidation of the 1,4‐cyclohexadienes can be accomplished under mild conditions to generate the corresponding arene derivatives.     

Experimental and Theoretical DFT Study on Synthesis of Sterically Crowded 2,3,3,(4)5‐Tetrasubstituted‐4‐nitroisoxazolidines via 1,3‐Dipolar Cycloaddition Reactions Between Ketonitrones and Conjugated Nitroalkenes

1,3‐Dipolar cycloaddition reactions between ketonitrones ( 1a , 1b , 1c , 1d , 1e ) and β‐substituted nitroalkenes ( 2a , 2b , 2c , 2d ) proceed under mild conditions, with complete regioselectivity, and lead with high yields to sterically crowded 2,3,3,5‐tetrasubstituted‐4‐nitroisoxazolidines ( 3a , 3b , 3c , 3d , 3e , 3f ). Reaction course may be interpreted on the basis of nature of local, nucleophile–electrophile interactions. Moreover, density functional theory (DFT) simulations of reaction paths suggest that these reactions should be considered as polar, “one‐step two‐stage” cycloadditions. Subsequently, it has been found that similar reactions between ketonitrones and α‐substituted nitroalkenes do not allow to obtain the expected 2,3,3,4‐tetrasubstituted‐4‐nitroisoxazolidines.     

C82与甲亚胺1,3-偶极环加成反应的理论研究

利用半经验PM3方法, 研究了C₈₂与甲亚胺叶立德1,3-偶极环加成反应的机理与区域选择性, 计算结果表明: C₈₂的1,3-偶极环加成反应遵循分步机理, 是一个放热反应; 反应活化能随着所加成键的键长增大而增加, 无论是从热力学还是从动力学方面考虑, 最优先加成的位置是键长最短、张力最大的键.     

Near‐Infrared Photoinduced Coupling Reactions Assisted by Upconversion Nanoparticles

We introduce nitrile imine‐mediated tetrazole–ene cycloadditions (NITEC) in the presence of upconversion nanoparticles (UCNPs) as a powerful covalent coupling tool. When a pyrene aryl tetrazole derivative (λ_{abs, max}=346 nm) and UCNPs are irradiated with near‐infrared light at 974 nm, rapid conversion of the tetrazole into a reactive nitrile imine occurs. In the presence of an electron‐deficient double bond, quantitative conversion into a pyrazoline cycloadduct is observed under ambient conditions. The combination of NITEC and UCNP technology is used for small‐molecule cycloadditions, polymer end‐group modification, and the formation of block copolymers from functional macromolecular precursors, constituting the first example of a NIR‐induced cycloaddition. To show the potential for in vivo applications, through‐tissue experiments with a biologically relevant biotin species were carried out. Quantitative cycloadditions and retention of the biological activity of the biotin units are possible at 974 nm irradiation.