STUDIES ON EPOXY RESINS MODIFIED WITH POLY (BUTYLENE TEREPHTHALATE)-b-POLY (TETRAMETHYLENE GLYCOL)

Poly(butylene terephthalate )-b-poly (tetramethylene glycol) (PBT-b-PTMG) was usedas rheology modifier for the epoxy resin. The segmental copolymer formed spherulites inthe epoxy medium. This copolymer was very effective in endowing yield stresses to theliquid resin. The PTMG segment brought in a lowering of the dissolution temperature ofthe spherulites in the epoxy gel. The cured resin with PBT-b-PTMG as modifier was two-phase materials. The rheology modifier improved the mechanical properties of the curedresin as well. The flexible PTMG segments, however, were not in favour of the tougheningeffect of the modifier. This was attributed to the large domain size of the dispersed phase.     

STUDIES ON THE PERMEABILITY OF P VC/EBBA OVERLAPPED ULTRATHIN COMPOSITE MEMBRANES MODIFIED BY PLASMA-POLYMERIZATION WITH FLUOROCARBON MONOMERS

The PVC/EBBA ultrathin composite membranes with thickness of about 100 nm were prepared by spreading the solution on water surface. The overlapped composite membrane showed a characteristic aggregation structure in which the polymer matrix exists as a three-dimensional spongy network and the liquid crystal domains werc observed. Tne surface modification for the overlapped membranes was carried out by means of plasma-polymerization with the monomers of fluorocarbon compounds. Both Arrhenius plots of permeability coefficients for oxygen ((?)_O_2) in the membrane samples before and after modification showed significant increase in the vicinity of the T_(KN) of EBBA.     

STUDIES ON MISCIBILITY OF POLY (ε-CAPROLACTONE) AND ALIPHATIC POLYCARBONATE BLENDS AND DETERMINATION OF THEIR INTERACTION PARAMETER*

In this paper the miscibility of poly (ε-caprolactone) (PCL) and aliphatic polycarbonate (APC) is studied by using DSC. The results show that PCL and APC are miscible in all ranges of composition. The interaction parameter between the polymers is calculated from the melting point depression data. Using optical microscope, the shapes of the PCL spherulites in the blends are observed.     

TRANSESTERIFICATION OF POLY(ETHYLENE TEREPHTHALATE) WITH POLY(ε-CAPROLACTONE)*

Transesterification of poly(ethylene terephthalate) (PET) with poly(ε-caprolactone) (PCL) was investigated bymeans of NMR spectroscopy, extraction experiments, differential scanning calorimetry (DSC) and phase contrast microscopy(PCM). The ~1H-NMR results show that transesterification takes place in the melt blends and leads to the formation of thePET-PCL copolyester with a chemical structure similar to ethylene terephthalate-ε-caprolactonc copolycster (TCL)synthesized directly from monomers. However, even in the blend that has been transesterified for 8 h, the random PET-PCLcopolyester, PET-PCL copolyester with long PET or long PCL segments and the unreacted PET and PCL homopolymersmay coexist. Due to the low mobility of PET and PCL chains and the high viscosity of the two macromolecules, thetransesterification proceeds with difficulty. Furthermore, PET is incompatible with PCL, the transesterification can onlyoccur at the interface or in the interfacial region between two phases, and finally the reaction can only reach a localequilibrium. These results indicate that in fact the transesterification in the melt blend between two incompatiblehomopolymers could not lead to the formation of completely random or typical block copolyesters.     

CONFORMATION AND CHAIN PACKING STRUCTURES OF POLY (ρ-PHENYLEN BENZOBISTHIAZOLE) BY MOLECULAR SIMULATION*

The conformation, the chain packing stabilization and the unit cell modeling of poly(p-phenylene benzobisthiazole) have been investigated by using molecular simulation techniquein the present work. A coupling behaviour of σ-bond rotations at either side of the pheny-lene ring or the heterocyclic ring was found surely to exceed a length of the repeat unit ofthe polymer chain. For a single chain model, the stable torsion angle of the repeat resultedat 14°. In the crystalline cell minimization, the dihedral angle along the polymer chaincould even be stabilized in various values. It therefore indicates that the intermolecularinteraction does play a considerable role for this polymer forming the conformation. Ac-cording to cohesive energies calculated for these unit cell models, the torsion angle in themost stable crystalline cell is 0°. When the chains packing together, there exist so manyenergy stable wells along the chain axis 0.35--0.36nm apart from neighbouring chains.Most of the unit cells have quite closed cohesive energies. These factors thus cause thedifficulty of forming an unique perfect crystalline structure of the polymer. The presentstudy suggested a number of reasonable unit cells, and the most stable crystalline structurefor this polymer that is monoclinic, non-primitive unit cell.     

STUDIES ON THE POLYMERIZATION OF β-CYCLODEXTRIN WITH EPICHLOROHYDRIN*

Different proportions of β-cydodextrin and epichlorohydrin were used to prepare a group of β-cyclodextrin polymers. The relationship between the reaction extent and the molar ratios of reactants was discussed according to the results of ~1H-NMR, ~(13) C-NMR spectra and elemental analysis. Especially, high resolution ~1H-NMR spectra were usd for studying the reaction active sites and the extent of reaction. The solubility of oil soluble drugs in water was largely improved in the presence of water-soluble β-cyclodextrin polymer.     

STUDIES ON THE REGULAR COPOLYMERS OF POLY (1, 4-PHENYLENETEREPHTHALAMIDE)

Two types of the regular copolymer of poly (1, 4-phenyleneterephthalamide) were synthesized by the low temperature solution polycondensation in NMP-CaCl_2 solvent system, using the piperazine or 2,5-dimethylpiperazine as the third components introduced in the main chain of poly (1, 4-phenyleneterephthalamide). The properties of copolymers were characterized by IR, SEM, X-RAY diffraction, polarizing microscopy, TGA and solubilities.Experimental results showed that the copolymers had good solubility and thermal stability, the concentrated sulfuric acid (～98% ) solution of regular PPTA copolymers had liquid crystalline proper-     

SYNTHETIC AND CATALYTIC PROPERTY STUDIES ON SILICA SUPPORTED BIS-(ACETYLACETONATO) COBALT(Ⅱ) COMPLEXES**

This paper reports mainly the preparation of silica supported acetylacetone ligands and their cobalt complexes, the characterization of their chemical structure, and the evaluation of their catalytic activity in the reaction for the preparation of ethers directly from alkanols and benzyl chloride. The results indicate that those silica supported β-diketone cobalt complexes (SACO) not only can simplify the reaction procedure of the ether preparation but also show a much higher catalytic activity in comparison with other homogeneous catalysts. In addition, SACO can be recovered and reused although their catalytic activity descend gradually as a result of the decrease in their cobalt content.     

~(13)C NMR STUDIES ON DYNAMICS OF POLY (n - ALKYL METHACRYLATES)

The dynamics of a series of poly(n-alkyl methacrylates) is investigated by means of ~(13)C spin-lattice relaxation experiments. The results show that the dynamics has the polymer property dependence.     

STUDIES ON THE PORE FORMATION MECHANISM OF β-CRYSTALLINE POLYPROPYLENE UNDER STRETCHING*

The pore formation mechanism of,β-crystalline polypropylene under stretching was investigated. The porosity of the samples increases rapidly with stretching, having a maximum at draw ratios around 2 and then decreases monotonically. An abrupt formation process of initial micropores at very low draw ratios was evidenced by in situ SAXS measurements. At the same time the phase transition from ,β-crystal to α-crystal proceeds slowly in the whole deformation process up to large draw ratios around 5. Comparative studies of α- and ,β-crystalline polypropylene samples before stretching indicate that in addition to difference in crystal forms the α- and β-crystalline polypropylene samples exhibit quite different morphological features. There are a lot of interfaces in ,β-crystalline polypropylene samples, which may have a lower density value and can be easily etched by argon ions and penetrated by small molecules. It was concluded from these experimental facts that the pore formation and crystal transition are two independent phenomena during the deformation of β-crystalline polypropylene samples, and phase transition from ,β-crystal to α-crystal could hardly be the origin of pore formation. A defect initiation mechanism was proposed to understand the pore formation behavior of β-crystalline polypropylenes.     

Synthesis and structure of the platinum complexes [Bu4N]+[PtBr5(DMSO)]?, [Ph4P]+[PtBr5(DMSO)]?, and [Ph3(n-Am)P]+[PtBr5(DMSO)]?

The complexes [Bu₄N]₂⁺[PtBr₆]²⁻ (I), [Ph₄P]₂⁺[PtBr₆]²⁻ (II), and [Ph₃(n-Am)P]₂⁺ (III) are synthesized by the reactions of tetrabutylammonium bromide, tetraphenylphosphonium bromide, and triphenyl(n-amyl)-tetraphenylphosphonium bromide, respectively, with potassium hexabromoplatinate (mole ratio 2: 1). After recrystallization from dimethyl sulfoxide, complexes I, II, and III transform into [Bu₄N]⁺[PtBr₅(DMSO)]⁻ (IV), [Ph₄P]⁺[PtBr₅(DMSO)]⁻ (V), and [Ph₃(n-Am)P]⁺[PtBr₅(DMSO)]⁻ (VI). According to the X-ray diffraction data, the cations of complexes IV–VI have a slightly distorted tetrahedral structure. The N-C and P-C bond lengths are 1.492(7)–1.533(6) and 1.782(10)–1.805(10) ?, respectively. The platinum atoms in the mononuclear anions are hexacoordinated. The dimethyl sulfoxide ligands are coordinated with the Pt atom through the sulfur atom (Pt-S 2.3280(18)–2.3389(11) ?). The Pt-Br bond lengths are 2.4330(6)–2.4724(6) ?.     

H键连接的三维超分子化合物[M(H2O)6](HL)2的合成、表征与结构[H2L=1-(4-羟基苯)-5-四氮唑硫乙酸，M=MnⅡ，CoⅡ，NiⅡ，ZnⅡ]

利用配体1-(4-羟基苯)-5-巯基四氮唑(H₂L)和金属盐酸盐在水溶液中反应,合成了4种离子型化合物,并测定了它们的晶体结构。分析结果显示它们是异质同晶,都属于P1空间群,分子通式为[M(H₂O)₆](HL)₂[M=Mn^Ⅱ (1),Co^Ⅱ (2),Ni^Ⅱ (3),Zn^Ⅱ (4     

Tetraphenylantimony(V) hexachloroplatinate, tetrachloroaurate, and hexachlorostannate [Ph4Sb] 2+ [PtCl6]2?, [Ph4Sb]+[AuCl4]?, and [Ph4Sb] 2+ [SnCl6]2?: Synthesis and crystal structures

The reactions of tetraphenylantimony with hexachloroplatinic and chloroauric acids in benzene afford bis(tetraphenylantimony) hexachloroplatinate (I) and tetraphenylantimony tetrachloroaurate (II), respectively. Compound II is also synthesized from tetraphenylantimony chloride and chloroauric acid in acetone. Bis(tetraphenylantimony) hexachlorostannate (III) is synthesized from tin dichloride and tetraphenylantimony chloride in acetone or from tin tetrachloride and tetraphenylantimony chloride in benzene. The crystal structures of compounds I–III are determined by X-ray diffraction analysis. The antimony atoms in the [Ph₄Sb]⁺ cations have a distorted tetrahedral coordination (CSbC bond angles range from 105.7(1)° to 118.5(1)° (I), from 106.2(3)° to 114.4(3)° (II), and from 106.0(1)° to 117.1(1)° (III)). The Sb-C bond lengths vary in intervals of 2.094(2)–2.098(2), 2.087(7)–2.111(7), and 2.093–2.100(3) ?, respectively. The coordination of the Pt and Sn atoms in complexes I and III is close to an ideal octahedral coordination with ClPtCl and ClSnCl bond angles of 88.68(2)°–91.32(3)° and 88.84(3)°–91.16(3)°, respectively. The square coordination of the Au atom in complex II is slightly distorted: the Au-Cl bond lengths are 2.266(2)–2.277(2) ?, the ClAuCl bond angles are equal to 89.7(1)°–90.5(1)°, the root-mean-square deviation of the atoms from the coordination plane being 0.004 ?. Original Russian Text ? V.V. Sharutin, V.S. Senchurin, O.A. Fastovets, A.P. Pakusina, O.K. Sharutina, 2008, published in Koordinatsionnaya Khimiya, 2008, Vol. 34, No. 5, pp. 373–379.     

STUDIES ON CROP LOSS CAUSED BY STRIPE RUST ON WINTER WHEAT (Ⅱ)——EFFECT OF DISEASE ON THE LEAF PHOTOSYNTHESIS

Winter wheat was used to investigate the effect of stripe rust (Puccinia striiformisWest.) on the photosynthesis of leaves with different disease severity. The rates of CO_2 uptakeof leaves were measured with an infrared gas analyzer. The results showed that on the dis-eased leaves the maximum rate of photosynthesis of the uncolonized part (P'_(max)) was negative-ly proportional to the disease severity and could be described as P'_(max)=P_(max)*(1- 0. 826*S).The photosynthsis model was built as P = I*@*P_(max)* (1 - b*S)/(P_(max)* (1- b*S) + I*@).From this model two relative photosynthesis reduction models were deduced: L_(photo) = A*S~n,where n = f(P'_(max)/P_(max)), and L_(photo) = 1 - (1 - S)*(1-b*S)*(P_(max) + I*@)/(P'_(max) + I*@).The relationship between the critical point crop loss model and these models was discussed.     

Multiple-layer heterometallic MnII–AgI coordination polymers constructed from [Ag 2I (CN)3]? and [AgI(CN)2]? units

Two multiple-layer heterometallic Mn^II–Ag^I coordination polymers, {Mn^II(ampyz)(H₂O)[Ag₂^I(CN)₃][Ag^I(CN)₂]·ampyz} _n (1) and {[Mn^II(benzim)₂[Ag^I(CN)₂]₂][(benzim)Ag^I(CN)]·H₂O} _n (2) where ampyz = 2-aminopyrazine and benzim = benzimidazole, have been prepared and structurally characterized. Compound 1 reveals a multiple-layer two-dimensional network with strong hexanuclear argentophilic interactions leading to an infinite three-dimensional framework. Compound 2 has an unprecedented double-layer two-dimensional squared grid-type network with (4,4) topology through Ag^I···Ag^I and π–π interactions between two adjacent squared layers. These double-layer networks of 2 are linked to others by π–π interactions, leading to a three-dimensional framework.     

EFFECTS OF ω-ACRYLOYL POLY (ETHYLENE OXIDE) MACROMONOMER ON EMULSIFIER-FREE EMULSI0N COPOLYMERIZATION OF METHYL METHACRYLATE AND n-BUTYL ACRYLATE*

Well-defined nonionic hydrophilic ω-acryloyl poly(ethylene oxide) macro-monomer (PEO-A) has been prepared by living anionic polymerization of ethylene oxidewith diphenyl methyl potassium as the initiator and acryloyl chloride as the reaction termi-nating agent. The polymer was characterized by FTIR and SEC. The emulsifier-free emul-sion polymerization of methyl methacrylate (MMA) and n-butyl acrylate (BA) containingvarious concentrations of PEO-A was studied. In all cases stable emulsion coplymerizationsof MMA and BA were obtained. The stabilizing effect was found to be dependent on themolecular weight and the feed amount of the macromonomer.     

Synthesis and structure of cobalt complexes [Ph3(n-Pr)P 2+ [CoI4]2? and [Ph3(n-Am)P 2+ [CoI4]2?

Complexes Ph₃(n-Pr)P₂⁺[CoI₄]²⁻ (I) and [Ph₃(n-Am)P]₂⁺ [CoI₄]²⁻ (II) were synthesized by reactions of triphenyl(alkyl)phosphonium iodide with cobalt(II) iodide in acetone. According to the X-ray diffraction data, complexes I and II consist of tetrahedral triphenyl(alkyl)phosphonium cations (for I, P-C is 1.787(4)–1.804(4) ? and CPC is 106.73(18)°–111.4(18)°; for II P-C is 1.786(6)–1.802(6) ? and CPC is 107.6(3)°–111.7(3)°) and [CoI₄]²⁻ anions (Co-I 2.5923(6)–2.6189(6) ?, ICoI 101.86(2)°–113.25(2)° for I; Co-I 2.5899(9)–2.6171(9) 107.01(3)°–110.47(3)° for II).     

Synthesis and structure of gold and copper complexes: [Ph3PhCH2P]+[AuCl4]?, [NH(C2H4OH)3]+[AuCl4]? · H2O, and [Ph3EtP] 2+ [Cu2Cl6]2?

Triphenylbenzylphosphonium tetrachloroaurate (I) and triethanolammonium tetrachloroaurate hydrate (II) were prepared by reacting tetrachloroauric acid in acetone with triphenylbenzylphosphonium and triethanolammonium, respectively. Triphenylethylphosphonium hexachlorodicuprate (III) was synthesized from triphenylethylphosphonium chloride and copper chloride in acetone. The crystal structures of complexes I to III were determined by single-crystal X-ray diffraction. The phosphorus atoms in complex I have a nearly undistorted tetrahedral coordination (CPC, 108.3°–110.6°; P-C, 1.788–1.793 ?). The coordination of nitrogen atoms in the cations of complex II is a distorted tetrahedron (CNC, 111.7°–112.4°). The square coordination of aurum in I and II is only slightly distorted: the ClAuCl angles are 89.6°–90.3° (I) and 89.5°–90.6° (II) and the Au-Cl distances are 2.256–2.278 ? I) and 2.280–2.285 ? (II). The phosphorus atoms in complex III are tetracoordinated (CPC, 106.34°–111.73°; P-C, 1.790–1.795 ?). The copper atoms in III have a distorted tetrahedral coordination (ClCuCl, 98.48°–144.85°; Cu-Cl, 2.1999–2.3263 ?). The central fragment Cu₂Cl₂ in the anion of complex III is bent relative to the Cu₂ axis (the chlorine atom deviates from the Cu₂Cl plane by 0.27 ?).     

GRAFTING OF HUMIC ACID ONTO COTTON CELLULOSE (Ⅱ)*

Cotton cellulose reacted with epichlorohydrin under the catalytic action of HClO_4 and H_2O to form 3-chloro-2-hydroxypropyl ether with a substitution degree of 0.61. The chlorine-containing product was treated with aliphatic diamines (ethylenediamine, propylenediamine, etc.) to produce nitrogen-containing cellulose which further reacted with humic acid to give black fiberous graft cellulose. This product contains 27—35% humic acid, 0.90 meq/g acidic groups, possesses 0.49 meq/g Cu~(2+)-complexing capacity and good mechanical strength, and can be used under pH12.     

[M(en)3] (ndt)•H2O的水热合成、晶体结构和光学性能 ( M=NiⅡ, CoⅡ, MnⅡ and ndt=1,5-naphthalenedithiolate )

水热条件下，合成了三个新的配合物[Ni(en)₃] (ndt) ·H₂O 1, [Co(en)₃] (ndt) ·H₂O 2 和[Mn(en)₃] (ndt) ·H₂O 3。晶体结构通过X-射线单晶衍射进行了表征。三个配合物均属于单斜晶系，Cc空间群。[M(en)₃]²⁺阳离子、ndt阴离子和结晶水分子通过氢键自组装出相同结构的三维网。通过紫外-可见-近红外漫反射光谱对这三个配合物的光吸收性能和能带进行了测定。