A Novel Thermothickening Aqueous System Prepared from Hydrophobically-Modified Acrylamide Copolymer,Poly(N-isopropylacryl-amide) and Sodium Dodecyl Benzene Sulfonate and Its Mechanism Studies

A new thermothickening aqueous system was presented based on mixtures of hydrophobically-modified acrylamide copolymer (HMPAM), poly(N-isopropylacryl-amide) (PNIPAM) and sodium dodecyl benzene sulfonate (SDBS). Unique in the thermothickening system, a maximum viscosity and the temperature (T _max) when reaching such viscocity change independently, reflects the presence of intermolecular interactions. The T _max of the new system suggests that its thermothickening behavior is correlated to the cloud point temperature (T _c) of PNIPAM, which can be easily adjusted to desired values by the addition of SDBS. The experimental data also indicate that the temperature between the rheological transition temperature (T _t) and T _max in HMPAM+PNIPAM+SDBS is within the range of 35–65°C, and the thermothickening behavior originates from the reinforcement of the association network between HMPAM, PNIPAM and SDBS. Consequently, the viscosity over the corresponding thermosensitive range upon cooling is higher than that upon heating.     

Interaction between anionic and cationic gemini surfactants at air/water interface and in aqueous bulk solution

The mixture of the anionic O,O′-bis(sodium 2-lauricate)-p-benzenediol (C₁₁pPHCNa) and cationic (oligoona)alkanediyl-α, ω-bis(dimethyldodecylammonium bromide) (C₁₂-2-E_x-C₁₂·2Br) gemini surfactants has been investigated by surface tension and pyrene fluorescence. The results show that the surface tension γ drops faster with total surfactant concentration C_T for α₁ = 0.1 or 0.3 than for α₁ = 0.7 or 0.9, where α₁ is the mole fraction of C₁₁pPHCNa in the bulk solution on a surfactant-only basis. The fast drop in γ for α₁ < 0.5 indicates strong adsorption at the air/water interface owing to the interaction between oppositely charged components, resulting in the formation of the adsorption double layers in the subsurface. The slow descent in γ for α₁ > 0.5 is attributed to the pre-aggregation in the solution before the critical micelle concentration cmc. A possible mechanism is proposed.     

Surfactant effect on the lower critical solution temperature of poly(organophosphazenes) with methoxy-poly(ethylene glycol) and amino acid esters as side groups

 The surfactant effect on the lower critical solution temperature (LCST) of thermosensitive poly(organophosphazenes) with methoxy-poly(ethylene glycol) and amino acid esters as side groups was examined in terms of molecular interactions between the polyphosphazenes and surfactants including various anionic, cationic, and nonionic surfactants in aqueous solution. Most of the anionic and cationic surfactants increased the LCST of the polymers: the LCST increased more sharply with increasing length and hydrophobicity of the hydrophobic part of the surfactant molecule. The ΔLCSTs (T _0.03M− T _0M), the change in the LCST by addition of 0 and 0.03 M sodium dodecyl sulfate (SDS), were found to be 7.0 and 14.5 °C for the polymers bearing ethyl esters of glycine and aspartic acid, respectively. The LCST increase of poly(organophosphazene) having a more hydrophobic aspartic acid ethyl ester was 2 times larger compared with that of the polymer having glycine ethyl ester as a side group. The binding behavior of SDS to the polymer bearing glycine ethyl ester as a hydrophobic group was explained from the results of titration of the polymer solutions containing SDS with tetrapropylammonium bromide. Graphic models for the molecular interactions of polymer/surfactant and polymer/surfactant/salt in aqueous solutions were proposed. Received: 17 February 2000/Accepted: 25 April 2000     

Rheological properties of the aqueous solution for fluorocarbon‐containing hydrophobically modified sodium polyacrylic acid with various surfactants

The interaction of fluorocarbon‐ containing hydrophobically modified sodium polyacrylic acid (FMPAANa) (0.5 wt%) with various surfactants (anionic, nonionic and cationic) has been investigated by rheological measurements. Different rheological behaviors are displayed for ionic surfactants and nonionic surfactants. Fluorinated surfactants have stronger affinity with polyelectrolyte hydrophobes comparing with hydrogenated surfactants. The hydrophobic association of FMPAANa with a cationic surfactant (CTAB) and a fluorinated nonionic surfactant (FC171) is much stronger than with a nonionic surfactant (NP7. 5) and an anionic surfactant (FC143). Further investigation of the effects of temperature on solution properties shows that the dissociation energy E_m is correlated to the strength of the aggregated junctions.     

Size-controlled synthesis of CuO–ZrO<Subscript>2</Subscript> nanoparticles prepared through reverse micelle method

In this research, CuO–ZrO₂ nanoparticles are synthesized using microreactors made of surfactant/water/cyclohexane microemulsions. The effect of different microemulsion variables on the particle size and its distribution, such as water-to-surfactant molar ratio (W ₀) and different surfactants are discussed. Three different surfactant types including cationic (CTAB), anionic (AOT), and nonionic (Brij56) are used. Also a different amount of water to surfactant in nano composite synthesis is used. The powders were characterized by DTA/TG, XRD, SEM, EDS, TEM and BET techniques and their physical properties are compared. The results show a decrease of particles size in presence of cationic surfactant. Narrow particles size distribution of the resultant CuO–ZrO₂ nanocomposite in presence of cationic surfactant, anionic and nonionic surfactant is compared. Also for AOT surfactant, by raising water to surfactant molar ratio the particles size is increased and the optimum ratio is H₂O: Surfactant = 0.32:0.055, respectively.     

Effect of Polymer on Dynamic Interfacial Tensions of Anionic–nonionic Surfactant Solutions

The dynamic interfacial tensions (IFTs) of enhanced oil recovery (EOR) surfactant/polymer systems against n-decane have been investigated using a spinning drop interfacial tensiometer in this paper. Two anionic–nonionic surfactants with different hydrophilic groups, C₈PO₆EO₃S (6-3) and C₈PO₆EO₆S (6-6), were selected as model surfactants. Partially hydrolyzed polyacrylamide (HPAM) and hydrophobically modified polyacrylamide (HMPAM) were employed. The influences of surfactant concentration, temperature, polymer concentration, and oleic acid in the oil on IFTs have been studied. The experimental results show that anionic–nonionic surfactants can form compact adsorption films and reach ultralow IFT (10^?3 mN/m) under optimum conditions. The addition of polymer has great influence on dynamic IFTs between surfactant solutions and n-decane mainly by the formation of looser mixed films resulting from the penetration of polymer chains into the interface. The compact surfactant film will also be weakened by the competitive adsorption of oleic acid, which results in the increase of IFT. Moreover, the penetration of polymer chains will be further destroyed surfactant/polymer mixed layer and lead to the obvious increase of IFT. On the other hand, polymers show little effect on the IFTs of 6-6 systems than those of 6-3 because of the hindrance of longer EO chain of 6-6 at the interface.     

Polymers as Hydrophobic Adsorbent Surface for Some Surfactants

Polyvinyl alcohol (PVA) and polyacrilic acid (PAA) were used as hydrophobic adsorbent surfaces at 25°C for two nonionic surfactants, namely, tetradecyl polyoxyethylenated monolaurate [La(EO)₁₄] and tetradecyl polyoxyethylenated monooleate [Ol(EO)₁₄], and two anionic surfactants, namely, sodium oleic sulfonate [OlSO₃Na] and sodium dodecyl benzene sulfonate [SDBS]. Surface tension measurements were performed to determine the critical micelle concentration (CMC) and the adsorption isotherms of the tested surfactants. All the tested surfactants display L-shape isotherms except that of OlSO₃Na onto PVA. No adsorption behavior has been shown for the anionic SDBS onto both PVA and PAA. The adsorption data show higher adsorption affinity for all the tested nonionic surfactants onto PAA than onto PVA while the investigated anionic surfactant OlSO₃Na possesses close values of Γ_max. The study reveals that the nature of the polymer surface as adsorbent besides the molecular structure of the surfactant defined the types and mechanisms of adsorption.     

A study on the protein concentration dependence of the thermodynamics of micellization

An investigation on the dependence of the thermodynamics of micellization of different surfactants such as sodium dodecyl sulfate (SDS), sodium octanoate (C8HONa), and sodium perfluorooctanoate (C8FONa) on the concentration of human serum albumin (HSA) has been realized. The critical micelle concentration (cmc) and ionisation degree of micellization, β, as a function of temperature (T), in solutions containing 0.125% and 0.250% in v/w of HSA, were estimated from conductivity data. From these results, the average number of surfactant monomers per protein molecule was calculated: higher values were found for C8HONa, the lowest value corresponded to SDS. For all the systems under study, electrostatic forces mainly drive the interaction between the surfactants and the proteins. Plots of cmc against temperature appear to follow the typical U-shaped curve with a minimum T_min. Thermodynamic functions of micellization were obtained by applying the theoretical models that best fit our experimental data, showing that the addition of HSA shows different patterns depending on the surfactant and thermodynamic quantity. Changes in the protein conformation due to the adsorption of surfactant molecules have been monitored by using UV-CD spectra. Greater changes in α-helical contents correspond with the concentrations over cmc, indicating that at low concentrations surfactants act as a structure stabilizer; meanwhile they act as a destabilizer at higher concentrations. C8HONa is the most effective reducing α-helical content, SDS is the less effective content.     

Mixed micellar systems of octyl β,d-glucopyranoside with a nonionic surfactant and a water-soluble polymer

We have made a comparative study between the micellar regions of the octyl -d-glucoside (OG)–tetraethylene glycol monododecyl ether and the OG–poly(ethylene glycol) 20,000 systems by means of surface tension and viscosimetric measurements. The incorporation of the tetraethylene glycol monododecyl ether nonionic surfactant in the OG micelles decreases the critical micelle concentration, whereas the presence of polymer increases it. The nonionic surfactant mixture exhibits nonideal mixing behaviour. The data fit to Rubinghs treatment with a value of –5.1, which implies a modest attraction between both surfactants. The surfactant–poly(ethylene glycol) 20,000 system does not form mixed micelles. The incorporation of polymer increases the critical micelle concentration of the surfactant. The viscosity for the surfactant–polymer system is higher than that for the pure polymer, demonstrating a surfactant-induced structuring.     

Interaction between two homologues of cationic surface active ionic liquids and the PEO-PPO-PEO triblock copolymers in aqueous solutions

The interaction of nonionic triblock copolymers of poly(ethyleneoxide) (PEO) and poly(propyleneoxide) (PPO) (PEO_nPPO_mPEO_n) with a series of cationic surface-active ionic liquids in aqueous solutions have been investigated. The cationic surface-active ionic liquids include 1-alkyl-3-methylimidazolium bromide (C_nmimBr, n?=?8, 10, 12, 14, 16) and N-alkyl-N-methylpyrrolidinium bromide (C_nMPB, n?=?12, 14, 16). For different polymer-surfactant systems, the critical aggregation surfactant concentration (cac), the surfactant concentration to form free micelles (C _m), and the saturation concentration of surfactant on the polymer chains (C ₂) were determined using isothermal titration microcalorimetry (ITC) and conductivity measurements. The structure of the formed aggregates depended strongly on the hydrophobicity of the surfactant and the ratio of polymer/surfactant concentration. For C₈mimBr, there were not any micelle-like surfactant?Cpolymer clusters detected in the solution, and only micelles appeared. For other surfactants, the polymer?Csurfactant aggregates were formed in the solution, which was verified by the appearance of a broad endothermic peak in the ITC thermograms. The intensity of polymer?Csurfactant interaction increased with the hydrophobicity of the surfactants and the polymers but was not affected by the surfactant headgroups.     

Interactions between nonpolar surfaces in mixed solutions of cationic and nonionic surfactants

The interaction energy between hydrophobic SiO₂ particles in aqueous solutions of a cationic surfactant (dodecylpyridinium bromide, DDPB), a nonionic surfactant (Triton X-100, TX-100), and their mixed solutions was measured as a function of concentration. Synergism has been observed in mixed surfactant solutions: the surfactant concentration required for achieving the set interaction energy in the mixed solutions was lower than in the solutions of the individual surfactants. The molecular interaction parameters in surfactant mixtures were calculated using the Rosen model. Chain-chain interactions between nonionic and cationic surfactants were suggested as the main reason for the synergism.     

The miscibility of dodecyltrihydroxyethylammonium bromide with cationic, nonionic and anionic surfactants in mixed monolayers and micelles

In this paper were analyzed the surface properties of surfactants and the miscibility and interactions between components of adsorbed monolayers and micelles formed from mixed systems. The investigated compounds differ in the structure of the polar head and represented cationic (dodecyltrihydroxyethylammonium bromide—DTEAB, dodecyltrimethylammonium bromide DTMAB), anionic (sodium dodecyl sulfate—SDS), and nonionic (dodecyl-β-d-glucoside—DG) surfactant. The experiments were based on the measurements of the surface tension of the aqueous solutions of the investigated compounds and their mixtures (cationic/nonionic—DTEAB/DG, cationic/cationic—DTEAB/DTMAB and cationic/anionic—DTEAB/SDS). The composition of the mixed films and micelles as well as the free energies of mixing values, which are a measure of the molecular interactions, was calculated basing on the equations resulting from the Motomura theory. The obtained results indicate that all the investigated systems mix nonideally both in the monolayers and micelles. The magnitude of the deviations from ideal behavior is strongly dependent on the type of the investigated mixture and increases in the following order: DTEAB/DTMAB < DTEAB/DG  DTEAB/SDS.     

Polymer structure‐dependent ion interaction studied by amphiphilic nonionic poly(organophosphazenes)

The relative effectiveness of anions and cations in altering macromolecular conformation was reported to be independent of the nature of the macromolecule. However, in terms of the degree of changes, macromolecule‐dependent ion action cannot be underestimated. The designed poly(organophosphazenes) have been selected for this study due to its versatility of the substitution with a fixed backbone. To set up the systematic explanation on the ion action related with molecular interactions, ions and polymers are arranged based on the water binding ability. As a characteristic factor specific in the thermothickening system, the temperature at which the viscosity of the polymer solution reaches the maximum (T_max) has been compared. Anions with strong water binding ability more effectively lower the T_max of the hydrophobic poly(organophosphazenes). Meanwhile, the T_max of the cation‐complexed poly(organophosphazenes) are lowered by the sequence of water binding ability of the complexed cations. In both the anion and cation interactions, poly(organophosphazenes) substituted by longer PEG and more hydrophilic amino acid ester, show differentiated result due to different interaction with water when compared with other polymer systems in this study. Ion interaction with poly(organophosphazenes) mediated by water supports interfacial interactions expressed by interaction parameters, which strongly depends on the polymer structure and ion type. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 2022–2034, 2008     

Use of surfactants to remove water-based inks from plastic film: effect of calcium ion concentration and length of surfactant hydrophobe

Effective plastic film deinking could permit the reuse of recycled polymer to produce clear film, reduce solid waste for landfills, reduce raw material demand for polymer production, and aid process economics. In this study, the deinking of a commercial polyethylene film printed with water-based ink was studied using surfactants in the presence of hardness ions (calcium ions) at various pH levels. The electrostatic properties of ink particles in a washing bath were also investigated. Synthetic anionic surfactant or fatty acid soap in the presence of calcium ions at alkaline pH levels was found to be nearly as effective at deinking as cationic, nonionic, or amphoteric surfactants alone. However, adding calcium ions decreases the deinking effectiveness of cationic, nonionic, and amphoteric surfactants. Increasing the length of the ionic surfactant hydrophobe enhances deinking. Zeta potential measurements showed that water-based ink particles in water reach the point of zero charge (PZC) at a pH of about 3.6, above which ink particles are negatively charged, so cationic surfactant tends to adsorb better on the ink than anionic surfactant above the PZC in the absence of calcium. As the cationic surfactant concentration is varied between 0.005 and 25 mM, the zeta potential of the ink particles reverses from negative to positive owing to adsorption of cationic surfactant. For anionic surfactants, added calcium probably forms a bridge between the negatively charged ink and the negatively charged surfactant head groups, which synergizes adsorption of the surfactant and aids deinking. In contrast, calcium competes for adsorption sites with cationic and nonionic surfactants, which inhibits deinking. All the surfactants studied here disperse ink particles effectively in the washing bath above pH 3 except for the ethoxylated amine surfactant.     

Investigations on mixed micelles of binary mixtures of zwitterionic surfactants and triblock polymers: a cyclic voltammetric study

Cyclic voltammetry has been employed to investigate the mixed micellar behavior of the binary mixtures of different zwitterionic surfactants such as 3-(N,N-dimethylhexadecylammonio)propane sulfonate (HPS), 3-(N,N-dimethyltetradecylammonio)propane sulfonate (TPS) and 3-(N,N-dimethyldodecylammonio)propane sulfonate (DPS) with three triblock polymers (L64, F127 and P65) by using 2,2,6,6-tetramethyl-1-piperidinyloxy (TEMPO) as an electroactive probe at 25 °C. Critical micellar concentration (cmc) has been determined from the plots of variation in peak current (i_p) versus the total concentration of surfactant/triblock polymer. Diffusion coefficient of the electroactive species has also been reported. The regular solution theory approximation has been used to determine various micellar parameters of ideal systems. The variation in micellar mole fraction (X₁) of the zwitterionic surfactant supports the formation of mixed micelles, which are rich in triblock polymer component in the surfactant rich region of the mixture and vice versa. The regular solution interaction parameter (β) suggests the formation of mixed micelles due to the synergistic interactions in case of HPS/TPS/DPS + F127/P65 systems and gets affected by EO/PO ratio of triblock polymers.     

Reaction of N,N-Dimethyl-N′-(2-hydroxybenzyl)ethylenediamine with Copper(II) in the Presence of Surfactants

The protolytic properties of N,N-dimethyl-N′-(2-hydroxybenzyl) ethylenediamine (HL) and its complexation with copper(II) in the presence of cationic (cetyltrimethylammonium bromide) and nonionic (Triton X-100) surfactants were studied by pH-metry, spectrophotometry, and mathematical simulation of the equilibria. Cetyltrimethylammonium bromide affects the H₂L₂ ⇄ 2HL equilibrium. Along with the protonated monomeric and dimeric species, triprotonated tetrameric species were revealed in surfactant solutions, as in aqueous solutions of isopropyl alcohol. The surfactants affect the complexation of HL with Cu(II). The 1 : 2 complex with the phenolate form in solutions of cetyltrimethylammonium bromide is formed in a more acidic medium (pH ∼5.5) compared to an aqueous solution of isopropyl alcohol (pH ∼11). The apparent stability constants of the complexes increase in the presence of surfactants, especially of cetyltrimethylammonium bromide.__________Translated from Zhurnal Obshchei Khimii, Vol. 75, No. 3, 2005, pp. 379–382.Original Russian Text Copyright © 2005 by Sal’nikov, Boos, Ryzhkina, Ganieva.     

Activity of α‐Chymotrypsin in Cationic and Nonionic Micellar Media: Ultraviolet and Fluorescence Spectroscopic Approach

α‐Chymotrypsin (α‐CT) activity was measured in aqueous buffer with the following alkyltriphenylphosphonium bromide surfactants in the series cetyl, tetradecyl, and dodecyl as a tail length. For the sake of comparison with mixed micellar investigation on activity of α‐CT, cationic cetyltriphenylphosphonium bromide (CTPB) and nonionic surfactant Triton X‐100, Brij‐56, Brij‐35, Tween 20, and Igepal Co‐210 have been used. The p‐nitrophenyl acetate (PNPA) hydrolysis rate was determined at the surfactant concentration of both cationic and mixed micellar systems by a UV–vis spectrophotometer. The catalytic reaction follows the Michaelis–Menten mechanism, and the catalytic efficiency (k_cat/K_M) was evaluated for both homogeneous and mixed‐micellar media. The maximum catalytic efficiency was observed at 5 mM concentration of CTPB, but the highest catalytic efficiency, 572 M^?1 s^?1, was measured in the presence of mixed micellar (7.5 mM CTPB + 2.5 mM Tween‐20). The fluorescence (FL) spectra showed the differences of α‐CT conformations in the presence of cationic surfactants. The FL results suggest that the influence of cationic surfactant on proteolysis arises from the interaction with the α‐CT. The binding constant, k_sv, of α‐CT with cationic aggregates was determined in the buffer using the Stern–Volmer equation by the fluorescence spectroscopic approach.     

Steady-state fluorescence investigations of aqueous binary mixtures of myristyl alcohol based bis-sulfosuccinate anionic gemini surfactant and effect of different conventional surfactants therein

The present research work is associated with the fluorescence investigations of binary aqueous mixed surfactants solutions of anionic bis-sulfosuccinate gemini surfactant (BSGSMA_1,8) and three different conventional surfactants—anionic viz. sodium dodecyl sulfate (SDS), cationic viz. cetyl trimethyl ammonium bromide (CTAB), and nonionic surfactant viz. Triton X 100. Steady-state fluorescence spectroscopy technique has been utilized to examine the micellization behavior of aqueous solution of pure myristyl alcohol-based BSGSMA_1,8 having flexible methylene chain [(CH₂)₈] as spacer group. Critical micelle concentration (CMC), aggregation number (N), and micropolarity of pure and mixed surfactants systems were explored during the investigations. The results revealed the best synergism behavior of prepared gemini BSGSMA_1,8 with SDS as compared to CTAB and Triton X 100. The maximum reduction in the value of pyrene intensity ratio (I₁/I₃) was observed for gemini and SDS mixed surfactant solution. On the other hand, the increased I₁/I₃ value of mixed gemini with Triton X 100 exhibited that mixed surfactant system of anionic gemini BSGSMA_1,8 with non-ionic Triton X 100 is not as compact as other mixed surfactant systems. Aggregation number increased and micropolarity decreased with increased concentration of gemini surfactants.     

Volumetric and transport properties of binary liquid mixtures of N-methylacetamide with lactones at temperatures (303.15 to 318.15) K

The values of density (ρ), viscosity (η) and speed of sound (u) have been measured for binary liquid mixtures of γ-butyrolactone (GBL), δ-valerolactone (DVL), and ε-caprolactone (ECL) with N-methylacetamide (NMA) over the whole composition range at T = (303.15 to 318.15) K and atmospheric pressure. From these data, excess molar volume (V^E), deviation in viscosity (Δη), and deviation in isentropic compressibility (Δκ_s), are calculated. The results are fitted to a Redlich–Kister type polynomial equation to derive binary coefficients and standard deviations.     

Micellization behavior of [C16-12-C16], 2Br gemini surfactant in binary aqueous-solvent mixtures

The micellization behavior of bis cationic gemini surfactant, N,N′-dihexadecyl-N,N,N′,N′-tetramethyl-1,12-dodecanediammonium dibromide [C₁₆H₃₃N⁺(CH₃)₂-(CH₂)₁₂-N⁺(CH₃)₂C₁₆H₃₃, 2Br⁻] has been studied in binary aqueous mixtures of dimethyl sulfoxide, methanol, 1,4-dioxane, glycerol and ethylene glycol by conductivity and surface tension measurements at 300 K. The critical micellar concentration, degree of micelle ionization (α), surface excess concentration (Г_max), minimum surface area per molecule of surfactant (A_min), Gibbs free energy of micellization (ΔG_m°), the surface pressure at cmc (π_cmc), and the Gibbs energy of adsorption (ΔG_ad°) of the gemini surfactant have also been determined. The cmc, α, A_min increases where as (ΔG_m°), Г_max, and π_cmc decreases with increasing volume percentage of the solvents in the solvent–water binary mixture. The interfacial properties of the gemini surfactant, solute–solute, solvent–solute interactions and the effectiveness of a surface-active molecule in binary solvent systems have been discussed.