YAG∶Ce体系中稀土离子掺杂对Ce3+的光谱性能的影响

采用高温固相法合成了一系列的(Y0.95Ln0.01Ce0.04)3Al5O12(简称YAG∶Ce,Ln), 系统地研究了此体系中的Ln3+对Ce3+的发光强度的影响. 结果表明, 在YAG∶Ce的体系中, La3+, Gd3+, Lu3+等光学透明离子的少量掺杂对Ce3+的发光强度的影响不大; 掺入少量的Pr3+, Sm3+, Tb3+, Dy3+, Ho3+, Er3+, Tm3+等稀土离子, 由于它们的能级与Ce3+的能级有交叠, 使它们之间存在着竞争吸收或能量转移, 对Ce3+的发光有较明显的变化, 其中, Pr3+和Sm3+的掺入使其在红光区有发射峰, 可以增加YAG∶Ce的红色成分以提高显色性; Nd3+, Eu3+和Yb3+对Ce3+的发光有严重的猝灭作用.     

LnBaB9O16︰Pr3+(Ln=La,Y)中Pr3+的双光子发射

在216nm紫外光激发下, LnBaB₉O₁₆︰Pr³⁺中的Pr³⁺离子可以发生双光子发射;稀土离子在LnBaB₉O₁₆中处于非中心对称格位,Pr³⁺离子的4f5d能态高于¹S₀能级,可以发生从¹S₀能级到中间能态及基态的双光子跃迁发射;LaBaB₉O₁₆中与稀土离子近邻的硼酸根离子为BO₄,相应的B—O振动频率较低,³S₀与¹D₂之间的无辐射跃迁几率比较小,可以出现从³S₀能级的发射.在YBaB₉O₁₆中,Pr³⁺的4f5d能态低于¹S₀能级,不能发生双光子发射.     

Na+/Ca2+交换调节的La3+跨淋巴细胞膜的定量研究

利用荧光浓度指示剂fura-2研究了La³⁺能否利用Na⁺/Ca²⁺交换系统进入人外周血淋巴细胞以及La³⁺Na⁺/Ca²⁺交换的影响. 并首次用此方法研究了La³⁺能否在细胞器(主要为内质网和线粒体)中蓄积. 实验结果表明, 用乌本苷预处理细胞并在无Na⁺介质中测试, 可明显观察到La³⁺跨膜进入淋巴细胞, 而且胞内La³⁺的浓度与胞外的La³⁺浓度成正比. 但当胞外La³⁺浓度大于0.4 mmol/L时, 不再观察到340/380 nm荧光比值的变化, 此时细胞内La³⁺浓度约为1.5×10^-12mol/L. 当La³⁺浓度较大时(0.1 mmol/L)抑制Na⁺/Ca²⁺交换操纵的Ca²⁺的进入, 而较低浓度(0.01 mmol/L)时却刺激Ca²⁺进入. 另外从实验结果可推测La³⁺可以被依赖ATP的质膜钙泵泵出胞外. 胞内钙库用离子霉素耗竭后, La³⁺内流过程中再次加入离子霉素后, 可明显观察到340/380 nm荧光比值增大, 说明La³⁺在细胞器中有一定程度的蓄积. 在模拟胞内离子组分的缓冲液中(pH = 7.05), fura-2对La³⁺的检测限为10^-12mol/L, 对Ca²⁺的检测限为10^-8 mol/L, 并测得fura-2-La³⁺的络合比为1∶1, 表观离解常数为1.7×10^-12 mol/L.     

稀土化合物晶体的化学键和光谱效应

计算了稀土化合物晶体的化学键参数和离子极化率,讨论了基质对稀土离子的电子云扩大效应和超灵敏跃迁的影响机理。     

NC2S+离子的结构和稳定性的理论研究

在密度泛函和从头算理论水平下计算了单重态的NC2S+离子的结构、能量、光谱以及稳定性. 在B3LYP/6-311G(d)水平下, 得到8个异构体, 它们由15个过渡态相连接. 在CCSD(T)/6-311+G(2df)//QCISD/6-311G(d)+ZPVE水平下, 得到能量最低的异构体是直线型的具有1Σ电子态的NCCS+(1)(0.0 kJ/mol), 其次是直线型的异构体CNCS+(2)(54.8 kJ/mol). 两个低能量的异构体1和2及另外一个高能量的直线型异构体CCNS+(3)(323.8 kJ/mol)都具有相当大的动力学稳定性, 这三个异构体在具备一定条件的实验室和星际条件下是可以进行观测的. 分析了这3个异构体的成键性质.     

稀土离子(La3+, Gd3+, Yb3+)对线粒体产生活性氧的影响

研究了稀土离子对分离的线粒体产生活性氧(ROS)的影响. 采用荧光光度法跟踪线粒体内H2O2生成的动力学, 发现三种稀土离子(La3+, Gd3+, Yb3+)均能降低线粒体H2O2的生成; 用黄嘌呤-黄嘌呤氧化酶体系进一步证明稀土对超氧阴离子(·O-2)存在清除作用, 而对H2O2无清除作用; 测定了稀土对线粒体ROS代谢酶(谷胱甘肽过氧化物酶和超氧化物歧化酶)的活性影响. 结果表明, 三种稀土离子对线粒体谷胱甘肽过氧化物酶的活性基本没有影响, 而Gd3+和Yb3+稀土离子能明显抑制线粒体超氧化物歧化酶的活性.     

GdPO4∶Eu3+和GdPO4∶Ce3+,Tb3+纳米晶多元醇法的合成与表征

首次采用多元醇的方法合成了GdPO4:Eu3+和GdPO4:Ce3+,Tb3+纳米晶,并利用X-射线衍射(XRD),傅立叶变换红外光谱(FTIR),透射电镜(TEM),光致发光光谱(PL)及热重和差示扫描量热分析(TG-DSC)对产物进行了表征.结果表明,产物为单斜晶系独居石结构正磷酸盐;形貌为梭形,长轴600～700 nm,短轴50～200 nm;纳米晶在水中有良好的分散性.GdPO4:Eu3+水溶液在251 nm激发下.发射光谱以Eu3+的5D0-7F1 (592 nm)磁偶极跃迁强度最大;GdPO4:Ce3+,Tb3+纳米晶水溶液的激发光谱在240～300nm处有一宽的吸收带,峰值位于262 nm,为Ce3+离子的4f-5d跃迁吸收,发射光谱呈现Tb3+特征绿色发射,最强峰位于544 nm.讨论了GdPO4:Ce3+,Tb3+体系中敏化发光机理,通过光谱分析证实了存在Ce3+→Gd3+→Tb3+的能量传递过程.     

稀土离子掺杂LaPO4纳米结构材料形貌、物相的调控及发光性能

利用水热合成技术,通过改变掺杂稀土离子的种类、掺杂浓度及添加剂的种类可实现LaPO4纳米结构材料形貌及物相的调控,同时还研究了合成材料的光致发光性能.结果表明:Ce3+离子掺杂浓度的增加可导致LaPO4纳米棒发生由单斜相向六方相的转变,而Tb3+离子掺杂浓度增加到相同的范围则不能够引起该相转变的发生;具有较小尺寸的LaPO4纳米棒易于"肩并肩"聚集形成纳米棒束;改变掺杂稀土离子的种类和浓度可调控纳米棒束的长度(150 nm～2.0μm),但对纳米棒束的直径影响不大(40～60 nm);添加剂的加入使纳米棒束更均一,对其相结构则基本没有影响;在紫外光激发下,单掺杂Ce3+或Tb3+离子的LaPO4纳米棒束分别表现出Ce3+或Tb3+离子的特征发射,由于Ce3+,Tb3+离子间存在有效的能量传递,Ce3+,Tb3+离子共掺杂的LaPO4纳米棒束表现出较强的Tb3+离子的绿光发射.     

NO3-+Cl2→ClONO2+Cl-反应势能面和势能阱

采用密度泛函理论B3LYP方法和6-311+G(d)基组, 计算构建离子-分子气相反应NO3-+Cl2→ClONO2+Cl-的三维势能面. 三维反应势能面证明该反应没有过渡态和势能垒, 但是存在一个深达-55.0 kJ/mol的势能阱(以氯气分子和硝酸根离子相隔无穷远为参量). 在势能阱底部, 有个化合物(O2NOClCl)- 称为势阱化合物, 依赖于势能阱而稳定存在. 理论红外光谱预测低温红外光谱能检测该势阱化合物. 低温条件下, 该反应由热力学控制, 反应产物是势阱化合物(O2NOClCl)-. 当温度升高, 该反应由动力学控制, 势阱化合物(O2NOClCl)-不稳定, 发生分解反应, 重新生成NO3-和Cl2. 研究结果可用来解释低温时ClONO2与Cl-气相反应不能产生Cl2的原因.     

绿色荧光粉KNaCa2（PO4）2:Tb3+的制备及发光性能研究

采用高温固相法成功制备了KNaCa2(PO4)2:Tb3+绿色荧光粉,并研究了其发光性质。测量了其激发和发射光谱,样品发射峰位于418,440,492,545,586,622 nm,分别对应Tb3+的5 D3→7 F5,5 D3→7 F4,5 D4→7 F6,5 D4→7 F5,5 D4→7 F4,5 D4→7 F3能级跃迁,主发射峰位于545 nm。主激发峰位于350～390 nm之间,属于4f→4f电子跃迁吸收,与InGaN管芯匹配。确定了在KNaCa2(PO4)2基质中Tb3+浓度对其发光强度的影响及其自身浓度猝灭机制。研究了不同电荷补偿剂对KNaCa2(PO4)2:Tb3+材料发光的影响,其中Li+离子改善其发光强度最为明显。     

LaX_3(X=F、Cl、Br、OH)晶体中的化学键参数计算

稀土化合物中稀土离子和配位体的成键性质一直是人们注意研究的课题之一,一般认为属于离子键,但具有少量的共价性,然而,具体的数量级尚不清楚。本文利用Phillips,VanVechten和Levine理论,对LaX_3(X=F、Cl、Br、OH)晶体的键性和有关参数进行了具体计算,定量指出了镧离子和配体成键的离子性和共价性程度,比较了各晶体中有关的键参数,发现了和宏观物理现象相关的规律。1 理论公式     

Fluorescent studies on the binding-Ca2 + in fibrinolytic principle separated from snake venom

By using equilibrium dialysis, atomic absorption spectrometry, fluorescence titration and determination of fluorescence lifetime, it can be determined that each fibrinolytic principle (FP) molecule contains one Ca2+-binding site and one Ca2+ ion, which can be substituted by a Tb3+ ion completely. The intramolecular energy transfer between Tb3+ and the tryptophan (Trp) residue in FP has been investigated through fluorescence spectroscopy. In the FP molecule, the excited energy can transfer from the Trp residue as an energy donor to the Tb3+ ion substituted as an acceptor. The distance between Tb3+ and the Trp residue, approximately 0.38 nm, has been calculated with the experimental data and Forster theory.     

Laser spectroscopic studies of Tb3+-doped oxyfluoroborate glass

Tb3+-doped oxyfluoroborate glasses have been prepared for different concentrations of Tb. The absorption, fluorescence and photoacoustic spectra of these have been recorded and studied. It is marked that the fluorescence intensity of different fluorescence transitions decreases with the increase of Tb ion concentration in the glass. This quenching at higher concentration is due to the energy transfer among the excited and nearest neighbor unexcited Tb ions in the glass. The lifetime measurement confirms it, as the lifetime of a particular state was found to decrease with the increase of Tb ion concentration in the glass. The mechanism of the energy transfer process was determined to involve quadrupole quadrupole interaction. We have also studied the energy transfer from Tb3+-->Pr3+ when both the rare earths are doped together in the glass. A decrease in the lifetime of the 5D4 level of Tb3+ with the increase of Pr3+ concentration confirms this.     

掺Tb3+聚醋酸乙烯乳液的制备及性质研究

在PVAc乳液聚合过程,将一定比例的三氯化铽(TbCl3)溶液与醋酸乙烯(VAc)单体同步滴入聚合体系,获得掺Tb3+ 离子的PVAc乳液, 研究Tb3+离子对PVAc乳液性能的影响。研究表明,Tb3+ 离子对PVAc的颗粒形貌、大小及其质量指标影响不大,但对发光性能有一定的影响,即掺Tb3+ 离子的PVAc会产生很强的Tb3+ 离子特征荧光,且随Tb含量的提高,其荧光强度随之增强,无荧光浓度猝灭现象。     

Synthesis and Luminescent Properties of Nano-scale Y2Si2O7:Re3+ (Re=Eu,Tb) Phosphors via Sol-Gel Method

By using metal nitrates as starting materials and citric acid as a complexing agent, Y2Si2O7:Re3+ (Re=Eu, Tb) phosphors were prepared by a sol-gel method. X-ray diffraction was employed to characterize the resulting samples. The results of XRD indicate that the ff-Y2Si2O7 nanocrystal with size of 27 nm is obtained at 1000 oC and the doping ion content does not influence the structure. The excitation spectra in the UV and VUV ranges and the emission spectra of Re3+ doped samples were measured. The excitation spectra in the VUV range is due to absorption of host, that in the UV range is ascribed to absorption transitions from 4f to 5d state of the Tb3+ and the charge transfer in the Eu3+-O2- bond. The spectral energy distribution of the Tb3+ emission depends strongly on the Tb3+ concentration. The dependence of photoluminescence intensity on Re3+ concentration is also discussed in detail. The fluorescent decay curves at room temperature were measured and analyzed.     

Structure and reactivity of benzoylnitrene radical anion in the gas phase

The open-shell benzoylnitrene radical anion, readily generated by electron ionization of benzoylazide, undergoes unique chemical reactivity with radical reagents and Lewis acids in the gas phase. Reaction with nitric oxide, NO, proceeds by loss of N2 and formation of benzoate ion. This novel reaction is also observed to occur with phenylnitrene anion, forming phenoxide. Similar reactivity was observed in the reaction between benzoylnitrene radical anion and NO2, forming benzoate ion and nitrous oxide. Electronic structure calculations indicate that the reaction has a high-energy barrier that is overcome by the energy released by bond formation. Benzoylnitrene radical anion also transfers oxygen anion to NO and NO2 as well as to CS2 and SO2. In contrast, phenylnitrene anion reacts with carbon disulfide by C+ or CS+ abstraction, forming S- or S2-. Electronic structure calculations indicate that benzoylnitrene in the ground state resembles a slightly polarized benzoate anion, but with a free radical localized on the nitrogen.     

Tb-MOFs在荧光检测方面的研究进展

镧系离子特殊的电子排布使镧系有机骨架材料（Ln-MOFs）具有独特的发光性质,通过骨架和不同客体分子间的相互作用,可实现对诸多物质的荧光检测。其中,以铽离子（Tb3+）为中心构筑的Tb-MOFs具有更优良的光学性能和更高的检测灵敏度,是一种极具潜力的高效荧光探针。本文以稀土Tb3+为主线,综述了近年来国内外Tb-MOFs材料在阴阳离子、有机小分子、生物分子荧光检测方面的研究进展,并对未来发展趋势进行了展望。     

芳羧酸功能化聚苯乙烯的制备及其与Tb(Ⅲ)离子配合物荧光发射特性初探

通过氯甲基苯甲酸(CMBA)的Friedel-Crafts 烷基化反应,对聚苯乙烯(PS)进行了功能化改性,将苯甲酸(BA)键合在聚苯乙烯侧链,制得了改性聚苯乙烯(BAPS),采用红外光谱、核磁共振氢谱及紫外吸收光谱等测试技术对其进行了结构表征,考察了影响CMBA与PS之间Friedel-Crafts烷基化反应的主要因素。 结果表明,适宜的反应条件为:70 ℃,以N,N-二甲基乙酰胺为溶剂,SnCl4为催化剂。 使BAPS与Tb(Ⅲ)离子配位,制得高分子-稀土配合物BAPS-Tb(Ⅲ),该配合物不仅发射出Tb3+离子的特征荧光,而且大分子配基BAPS对Tb3+离子的荧光发射显示出很强的敏化作用。     

Nd^3＋离子的晶场劈裂与基质晶体的化学键

利用研究复杂晶体化学键的理论方法，计算了一组ＡＢＯ４型基质晶体的结构参数和化学键参数，发现Ｎｄ＾３＋离子的总晶场劈裂能△Ｅ与晶体的平均共价性有线性关系。     

Structure and interaction between the [BMIM][Ala] alanine anion and the 1-butyl-3-methylimidazolium cation in ion pairs

The equilibrium geometries and vibrational frequencies of the ionic liquid 1-butyl-3-methylimidazolium cation and the alanine anion [BMIM][Ala] are studied using density functional theory (DFT) at the B3PW91/6-311+G(d,p) leve1. The most stable structures of the anion, the cation, and the ion pairs are obtained and characterized, and the geometry parameters of the ion pairs confirm the presence of a hydrogen bonding interaction between the anion and the cation. Natural bond orbital (NBO) analysis is also performed to analyze the atomic charge distribution and charge transfer in the [BMIM]⁺ cation and [BMIM][Ala] ionic liquids. The results show that there are the electrostatic interaction and multiple hydrogen bond interactions between the cation and the anion of the ionic liquids, and the stability of the ground state of the ion pairs mostly results from the hydrogen bonding between the lone pairs of O atoms in the anion and H in the imidazole cycle of the cation. There are some changes in microstructures and the charge distribution during the formation of the ion pairs.