Spectral and photochemical properties of hybrid organic—inorganic nanosystems based on CdS quantum dots and a styrylquinoline ligand

The kinetics of photolysis of a styrylquinoline (SQ) derivative as the photochromic ligand in organic—inorganic hybrid nanosystems (HNSs) with the core composed of CdS quantum dots (QDs) has been studied for the first time as a function of the number of ligand molecules in the HNS shell, which varied from 1 to 10. The hybrid nanosystems have been synthesized in the microwave-assisted mode according to the single-step injection-free procedure. It has been shown that high quantum yields of photoisomerization of the SQ ligand are conserved in the HNS. In the early stages of the photolysis, regardless of the number of SQ ligand molecules in the HNS shell, the kinetics obeys the equation for the photolysis of the monomolecular system (model SQ photochrome) with allowance for the absorption due to QDs as an inert shutter. During the course of long-term photolysis, the quantum dots undergo photodegradation to be completely decomposed. According to the principal component analysis data, several photoproducts with different absorption spectra are formed at the intermediate times of the HNS photolysis.     

Luminescence Study of ZnS Quantum Dots Prepared by Chemical Method

We report synthesis of ZnS quantum dots by chemical method at room temperature. In this technique, ZnS quantum dots are produced by simple chemical reactions where zeolite, acts as matrix, plays the key role in controlling particle growth during synthesis. Quantum dots exhibit luminescence properties such as Zn²⁺ related emission, efficient low voltage electroluminescence, and super linear voltage-brightness EL characteristics. This study demonstrates the technological importance of semiconductor nanosystems prepared by low cost chemical route.     

Nonblinking plasmonic quantum dot assemblies for multiplex biological detection

Nonblinking nanosystems are prepared by layer-by-layer polyelectrolyte deposition, which precisely controls the stoichiometry and the distance between quantum dots (QDs) and gold nanoparticles (GNPs). Conjugation of biorecognition molecules to these nanobarcodes enables cell targeting and entry with prolonged retention and minimal toxicity.     

Luminescence of Hybrid Nanostructures of InP@ZnS Colloidal Quantum Dots and <Emphasis Type="Italic">meso</Emphasis>-Tetra(3-pyridyl)porphyrin Molecules

The formation of hybrid nanostructures consisting of InP@ZnS colloidal quantum dots and mesotetra(3-pyridyl)porphyrin molecules adsorbed on the quantum dots has been studied. In such nanostructures, strong quenching of quantum dot luminescence and an increase in the emission intensity of porphyrin are observed due to nonradiative resonance energy transfer from colloidal quantum dots to porphyrin.     

Characterization and Polymerization of Thienylphenyl and Selenylphenyl Amines and Their Interaction with CdSe Quantum Dots

Hybrid quantum‐dot‐sensitized solar cells show promising novel optoelectronic properties. An adequate design of such cells requires a deep understanding of the characteristics of each component, including their interactions. In this context, the electrochemical properties of two different hole‐transporting materials (HTMs) and their chemical interactions with trioctylphosphine‐capped CdSe quantum dots are investigated to evaluate their potential use in hybrid quantum‐dot‐sensitized solar cells. Tris[4‐(thien‐2‐yl)phenyl]amine (TTPA) and tris[4‐(selen‐2‐yl)phenyl]amine (TSePA) are studied in the solid state as thin films deposited on a conducting substrate. Spectroelectrochemical studies evidence both solid‐state electropolymerization and doping. Upon addition of TSePA or partially polymerized TTPA to a colloidal solution of trioctylphosphine‐capped CdSe quantum dots, the steady‐state photoluminescence is quenched. This suggests that the quantum dots and the HTM strongly interact, probably through an excited‐state charge‐transfer mechanism. The combination of all these pieces of information indicates that polymerized TTPA and TSePA are potential candidates as HTMs for hybrid quantum‐dot‐sensitized solar cells.     

Encapsulation of Quantum Dots Inside Liposomal Hybrid Cerasome Using a One-Pot Procedure

A one-pot strategy for the fabrication of the quantum dots loaded cerasome has been successfully developed based on the condensation of dihexadecylamine and 3-isocyanatopropyltriethoxysilane, followed by spontaneous encapsulation and solubilization of hydrophobic quantum dots into the hybrid liposomal cerasomes in combination of self-assembly and sol-gel process. Fourier transform infrared spectroscopy and mass spectra prove the formation of the intermediate organoalkoxysilane with a lipid-like structure, which forms cerasome vesicles. After encapsulation into cerasome, quantum dots become well dispersed in aqueous solution. Such water-soluble QD cerasomes exhibit a better photostability and retain the luminescence property of the original hydrophobic quantum dots.     

A Stimuli‐Responsive Smart Lanthanide Nanocomposite for Multidimensional Optical Recording and Encryption

A stimuli‐responsive lanthanide‐based smart nanocomposite has been fabricated by supramolecular assembly and applied as an active material in multidimensional memory materials. Conjugation of the lanthanide complexes with carbon dots provides a stimuli response that is based on the modulation of the energy level of the ligand and affords microsecond‐to‐nanosecond fluorescence lifetimes, giving rise to intriguing memory performance in the spatial and temporal dimension. The present study points to a new direction for the future development of multidimensional memory materials based on inorganic–organic hybrid nanosystems.     

Ultrafast Carrier Dynamics in CdSe/CdS/ZnS Quantum Dots

The intra- and inter-band relaxation dynamics of CdSe/CdS/ZnS core/shell/shell quantum dots are investigated with the aid of time-resolved nonlinear transmission spectra which are obtained using femtosecond pump-probe technique. By selectively exciting the core and shell carrier, the dynamics are studied in detail. Carrier relaxation is found faster in the conduction band of the CdS shell (about 130 fs) than that in the conduction band of the CdSe core (about 400 fs). From the experiments it is distinctly demonstrated the existence of the defect states in the interface between the CdSe core and the CdS shell, indicating thatultrafast spectroscopy might be a suitable tool in studying interface and surface morphology properties in nanosystems.     

Colloidal CdSe quantum dot electroluminescence: ligands and light-emitting diodes

We examine the effects of surface ligand exchange on the performance of hybrid organic/inorganic light emitting diodes (LEDs) that use colloidal nanocrystal quantum dots as emissive centers. Using a series of primary alkylamines with different alkane chain lengths, we exchange the native surface ligands on a series of CdSe/CdZnS/ZnS core/shell/shell nanocrystal quantum dots and compare the differences in photoluminescence and electroluminescence efficiency of the emissive quantum dot layer. We fabricate LEDs made with octadecylamine-, octylamine-, and butylamine-exchanged quantum dots. We find that the differences in electroluminescence efficiency of the devices are not always proportional to the photoluminescence quantum efficiency of the quantum dots. We discuss this trend both in terms of the competing needs of high photoluminescence efficiency and good charge injection and energy transfer, and also in terms of the different processability and film morphology arising from the use of nanoparticles passivated with shorter ligands. Correspondence: David S. Ginger, Department of Chemistry, University of Washington, Seattle, Washington 98195-1700, USA     

Incorporation of quantum dots into a silica matrix using a compatible precursor

A method is developed for one-stage incorporation of cadmium-sulfide quantum dots synthesized in the presence of mercaptosuccinic acid into a silica matrix formed from a precursor containing ethylene-glycol residues—tetrakis(2-hydroxyethyl) orthosilica. This precursor has not previously been applied for this purpose. It is more compatible with diverse substances than tetraethoxysilane, which is traditionally used. Moreover, it is advantageous in its unlimited solubility in water; release of ethylene glycol, which does not precipitate quantum dots, rather than alcohol upon hydrolysis; and the feasibility of performing the sol-gel process at any pH value in a range of 2–10 without the addition of acid or alkali and without heating. When the precursor (50 wt %) is added to a dispersion of quantum dots, the system is transformed into a gel in as little as a few minutes. The synthesized hybrid materials are optically transparent. Therewith, the quantum dots incorporated into the silica matrix exhibit luminescence, with their spectral characteristics remaining almost unchanged.     

Quantum dot micropatterning on si

Using InP and PbSe quantum dots, we demonstrate that the Langmuir-Blodgett technique is well-suited to coat nonflat surfaces with quantum dot monolayers. This allows deposition on silicon substrates covered by a developed patterned resist, which results in monolayer patterns with micrometer resolution. Atomic force microscopy and scanning electron microscopy reveal the formation of a densely packed monolayer that replicates predefined structures with high selectivity after photoresist removal. A large variety of shapes can be reproduced and, due to the excellent adhesion of the quantum dots to the substrate, the hybrid approach can be repeated on the same substrate. This final possibility leads to complex, large-area quantum dot monolayer structures with micrometer spatial resolution that may combine different types of quantum dots.     

碲化镉/马来酰亚胺三嗪纳米杂化材料的制备及其光性能研究

利用低温水相法, 以巯基丙酸(MPA)作为稳定剂制备了碲化镉(CdTe)量子点, 通过马来酰亚胺三嗪(TMT)中的三嗪基团与CdTe量子点表面富含的羧基之间的氢键作用, 得到了分散性能优良的纳米杂化材料. 利用紫外-可见吸收光谱、荧光光谱以及透射电子显微镜等手段对产物的光物理性质和形貌进行了表征. 结果表明, 马来酰亚胺三嗪与CdTe量子点杂化后, CdTe量子点的荧光发射峰有明显的蓝移, 在CdTe量子点和马来酰亚胺三嗪之间存在着能量转移, 并且纳米杂化材料的分散性也有明显的改善.     

Spectral characteristics of CdS quantum dots and their associates with dye molecules dispersed in gelatin

A sol–gel method for the production of open quantum dots of CdS measuring 2-5 nm and their associates with dye molecules [methylene blue and the pyridinium salt of 3,3′-di(γ-sulfopropyl)-9-ethyl-4,5,4′,5′-dibenzothiacarbocyaninebetaine] dispersed in gelatin is described. Their spectral characteristics are analyzed. Evidence is obtained for the formation of hybrid associates of CdS quantum dots with monomers of the first and J-aggregates of the second dye.     

Synthesis and application of quantum dots FRET-based protease sensors

Preparation of FRET-based quantum dots as protease sensors-RGDC peptide molecules are bound to the surface of CdSe/ZnS quantum dots. The peptide molecules are then labeled with rhodamine dye molecules. The emission color of the quantum dots change from green to orange due to fluorescence resonance energy transfer (FRET) between the quantum dots and the bound rhodamine molecules. Cleavage of the peptide by selective proteases releases the rhodamine molecules from the quantum dots surface, which results in decreasing FRET efficiency between the quantum dots and the rhodamine molecules. The emission color of the quantum dots changes back to green.     

化学合成荧光量子点在指纹显现中的应用

简要阐述了量子点的光学特性、制备方法及其在指纹显现中的应用。重点介绍了Ⅱ~Ⅵ族的CdS基、CdTe基、CdSe基、ZnSe基量子点和Ⅲ~Ⅴ族的InP量子点的化学合成、修饰及其在指纹显现中的研究进展,最后介绍了第Ⅳ族C、Si量子点的研究现状,并对其在指纹显现中的潜在应用作了展望。     

In-situ encapsulation of quantum dots into polymer microspheres

We have incorporated fluorescent quantum dots (QDs) into polystyrene microspheres using functionalized oligomeric phosphine (OP) ligands. We find that a uniform distribution of quantum dots is loaded inside each polymer bead. Some local close-packing of quantum dots in the beads is attributed to the self-polymerization of the functionalized ligands. The presence of quantum dots disturbs the nucleation and growth processes during the formation of polymer microspheres and results in a wider size distribution of the quantum dot-embedded polystyrene beads than for the control without dots. The change in quantum efficiency of the quantum dots before (approximately 20%) and after (12%) loading into the beads substantiates the protection of oligomeric phosphine ligands yet indicates that the properties of these quantum dots are still affected during processing.     

Spectroscopic investigation of defect-state emission in CdSe quantum dots

CdSe quantum dots are the most studied Cd-based quantum dots with their high quantum yield, high photostability, narrow emission band, and easy synthesis procedure. They are frequently used to develop light emitting diode (LED) due to their unique photophysical properties; however, their narrow emission band causes a challenge to design white LEDs because white light emission requires emission in multiple wavelengths with broad emission bands. Here in this study, we developed CdSe quantum dots with a narrow band-edge emission band and broad defect-state emission band through a modified two-phase synthesis method. Our results revealed that defect-state emission is directly linked to the surface of quantum dots and can be excited through exciting surfactant around the quantum dot. The effect of surfactant on emission properties of CdSe quantum dots diminished upon growing a shell around CdSe quantum dots; as a result, surface-dependent defect-state emission cannot be observed in gradient heterogeneous alloyed CdS_xSe_1-x quantum dots.     

ZnIn2S4 flowerlike microspheres embedded with carbon quantum dots for efficient photocatalytic reduction of Cr(VI)

Development of efficient heterostructured photocatalysts that respond to visible light remains a considerable challenge. We herein show the synthesis of ZnIn₂S₄/carbon quantum dot hybrid photocatalysts with flowerlike microspheres via a facile solvothermal method. The ZnIn₂S₄/carbon quantum dot flowerlike microspheres display enhanced photocatalytic and photoelectrochemical activity compared with that of pure ZnIn₂S₄. With a content of only 0.5 wt % carbon quantum dots, 93% of Cr(VI) is reduced under visible-light irradiation at 40 min. As a co-catalyst, the carbon quantum dots improve the light absorption and lengthen the lifetime of charge carriers, consequently enhancing the photocatalytic and photoelectrochemical activity.     

ZnS∶Co半导体量子点的制备及其光电化学性质

采用低温水热技术,分别以柠檬酸(CA)和巯基丙酸(MPA)为稳定剂,在70℃的水相中合成了单分散的,粒子尺寸约为4 nm的ZnS∶Co半导体量子点.研究了稳定剂、Co2+掺杂剂及其掺杂量对掺杂量子点发光性能和结构的影响.XRD结果表明,Co2+离子主要掺杂在量子点表面,对主体ZnS晶格没有影响.当采用MPA为稳定剂,掺杂量为5%(摩尔分数)时,掺杂量子点的荧光发射强度最高;而同样掺杂量下采用CA为稳定剂时,量子点的荧光发射强度有所下降.循环伏安研究显示,与空白ZnS量子点相比,Co2+离子的掺杂在ZnS的禁带中形成杂质能级,相应地,ZnS∶Co量子点的吸收边发生红移.与未掺杂ZnS量子点相比,掺杂量子点具有较少的表面非辐射复合中心,因而荧光发射强度显著提高.     

Transparent polymeric hybrid film of ZnO nanoparticle quantum dots and PMMA with high luminescence and tunable emission color

ZnO nanoparticle quantum dots (QDs)/poly(methyl methacrylate) (PMMA) composites are synthesized by conventional radical polymerization in the presence of 3-(trimethoxysilyl)propylmethacrylate (TPM)-modified ZnO nanoparticle QDs. Although unmodified ZnO nanoparticle QDs were precipitated in tetrahydrofuran (THF) and show only weak emissions under UV irradiation, ZnO nanoparticle QDs/PMMA composite is well dispersed in THF and shows high emissions. TPM acts as the stabilizer and promotes the compatibility between the ZnO nanoparticle QDs and the PMMA matrix. After evaporation of THF from the ZnO nanoparticle QDs/PMMA composite solution, transparent polymeric hybrid films of ZnO nanoparticle QDs and PMMA are obtained. These polymeric hybrid films are characterized by photoluminescence (PL) spectroscopy, Fourier transform infrared (FT-IR) spectroscopy, transmission electron microscopy (TEM), and thermogravimetric analysis. The hybrid film exhibited a high quantum yield and PL emission under ultraviolet excitation. PL emission has been successfully tuned from blue to yellow.