Plasmon interactions between gold nanoparticles in aqueous solution with controlled spatial separation

The effects of interparticle distance on the UV-visible absorption spectrum of gold nanocrystals aggregates in aqueous solution have been investigated. The aggregates were produced by ion-templated chelation of omega-mercaptocarboxylic acid ligands covalently attached to the nanoparticles surface. Variation of the ligand chain length provides control over the interparticle separation in the aggregates. The UV-visible spectra consist typically of a single particle band and a secondary band at higher wavelengths associated with the formation of aggregates in solution. The position of the latter depends on interparticle separation up to distances of approximately 8 nm, in accordance with existing models. Potential applications therefore include distance sensitive labels or proximity probes. Conversely, variation of the ligand length allows the preparation of nanostuctured materials with tuned optical properties.     

Ultrafast electron relaxation dynamics in coupled metal nanoparticles in aggregates

We report the effect of aggregation in gold nanoparticles on their ultrafast electron-phonon relaxation dynamics measured by femtosecond transient absorption pump-probe spectroscopy. UV-visible extinction and transient absorption of the solution-stable aggregates of gold nanoparticles show a broad absorption in the 550-700-nm region in addition to the isolated gold nanoparticle plasmon resonance. This broad red-shifted absorption can be attributed to contributions from gold nanoparticle aggregates with different sizes and/or different fractal structures. The electron-phonon relaxation, reflected as a fast decay component of the transient bleach, is found to depend on the probe wavelength, suggesting that each wavelength interrogates one particular subset of the aggregates. As the probe wavelength is changed from 520 to 635 nm across the broad aggregate absorption, the rate of electron-phonon relaxation increases. The observed trend in the hot electron lifetimes can be explained on the basis of an increased overlap of the electron oscillation frequency with the phonon spectrum and enhanced interfacial electron scattering, with increasing extent of aggregation. The experimental results strongly suggest the presence of intercolloid electronic coupling within the nanoparticle aggregates, besides the well-known dipolar plasmon coupling.     

Control of gold nanoparticle aggregates by manipulation of interparticle interaction

The size of gold nanoparticle aggregates was controlled by manipulating the interparticle interaction. To manipulate the interparticle interaction of gold nanoparticles prepared by citrate reduction, we applied the substitutive adsorption of benzyl mercaptan on the particle surface in the absence of the cross-linking effect. Various experimental techniques such as UV-vis absorption spectroscopy, surface-enhanced Raman scattering, quasi-elastic light scattering, and zeta-potential measurement were used to characterize the nanoparticle aggregates. Our results suggest that the replacement of the trivalent citrate ions adsorbed on the nanoparticle surface with monovalent benzyl mercaptan ions should destabilize the particles, causing aggregation and hence the increase in the size of nanoparticle aggregates. These experimental results were successfully rationalized by the classical DLVO (Derjaguin-Landau-Vervey-Overbeek) theory that describes the interparticle interaction and colloidal stability in solution. Our findings suggest that the control of surface potential is crucial in the design of stable gold nanoparticle aggregates.     

Synthesis and surface structure of thymine-functionalized, self-assembled monolayer-protected gold nanoparticles

Thymine-functionalized SAM-protected gold nanoparticles with diameters of 2.2 +/- 0.3 nm and 7.0 +/- 1.0 nm were prepared via a modified two-phase transfer method. UV-vis spectra showed that particle size and solvent type, as well as surface charge, influenced the gold surface plasmon band absorption, along with the interaction between thymine terminal groups in the solution. Although the bulky thymine end groups interacted strongly on the particle surface, a well-ordered monolayer of thyminethiol derivatives with a long hydrocarbon chain was formed on the particle surface, exhibiting an ordered, all-trans conformation of the methylene backbone, similar to those of corresponding self-assembled monolayers (SAMs) generated from normal alkanethiols. A larger particle size and a longer reaction time facilitated the formation of more ordered thymine-terminated thiol SAMs. Thermal analysis indicated that reorientation of the SAMs during heat treatment occurred by two processes, caused possibly by the separate recrystallization of the hydrocarbon long chains and thymine units. More ordered SAMs with a higher thermal stability were formed on the larger particle surfaces when compared with those on the smaller ones. A greater density of molecular packing was found on the smaller particle surfaces. However, SAMs formed on the larger gold particles resembled 2D SAMs on the smooth, flat gold surfaces. XPS results confirmed the thymine structure as well as the chemical bond between gold and sulfur. One type of adsorbed sulfur species was observed for the smaller particles and two for the larger ones, but a slightly higher binding energy of thiolate was found for the smaller ones.     

Influence of intense pulsed laser irradiation on optical and morphological properties of gold nanoparticle aggregates produced by surface acid-base reactions

Gold nanoparticles were surface modified with an ionizable and pH-sensitive monolayer of thiobarbituric acid (TBA). By variation of the pH value of the solution, nanoparticle aggregates can be produced in a controlled way. The aggregates thus prepared were irradiated with an intense pulsed laser at 532 nm. The products in solution were examined by transmission electron microscopy (TEM) and optical absorption spectroscopy. The TEM images of the products revealed that the nanoparticle aggregates dissociate upon laser irradiation and form much smaller gold nanoparticles. The optical absorption spectra measured simultaneously show the gradual disappearance of the absorbance band of the aggregates at around 680 nm. Additionally, a blue shift (from 534 to 524 nm) of the resonance absorbance corresponding to isolated nanoparticles has been observed. All the observations suggest that the colloidal solution becomes more stable after laser irradiation. Both the reduced nanoparticle size and the stabilizing TBA ligands present on the particle surface contribute to the acquired stability of the colloidal solutions.     

Polymer-induced synthesis of stable gold and silver nanoparticles and subsequent ligand exchange in water

A simple, inexpensive, single-step synthesis of gold and silver nanoparticles using poly(allylamine) (PAAm) as a reducing and stabilizing agent is reported. The synthetic process was carried out in aqueous solution, making the method versatile and environmentally friendly. The synthesized polymer-stabilized nanoparticles are stable in water without particle aggregation at room temperature for at least a month. We demonstrate successful ligand exchange on the polymer-stabilized gold nanoparticles (AuNPs) with a variety of omega-functionalized acid-, alcohol-, amine-, and biotin-terminated alkylthiols. The methodologies, including ligand exchange, also are applicable for the generation of finely dispersed silver nanoparticles. The synthesized gold and silver nanoparticles are characterized by UV-visible absorption spectroscopy and transmission electron microscopy (TEM). The different ligand-stabilized AuNPs are also analyzed by Fourier transform infrared (FTIR) spectroscopy.     

Construction of simple gold nanoparticle aggregates with controlled plasmon–plasmon interactions

We have developed a colloidal assembly for the study of plasmon–plasmon interactions between gold nanoparticles. Colloidal aggregates of controlled size and interparticle spacing were synthesized on silica nanoparticle substrates. Following the immobilization of isolated gold nanoparticles onto silica nanoparticles, the surfaces of the adsorbed gold nanoparticles were functionalized with 4-aminobenzenethiol. This molecular linker attached additional gold nanoparticles to the ‘parent' gold nanoparticle, forming small nanoparticle aggregates. The optical absorption spectrum of these clusters differed from that of gold colloid in a manner consistent with plasmon–plasmon interactions between the gold nanoparticles.     

Fabricating gold nanoparticle-oxide nanotube composite materials by a self-assembly method

Composition of nanostructured metal particles on oxide tubes (TiO2 and ZrO2) were fabricated and characterized. The composite materials were examined by transmission electron microscopy, scanning electron microscopy, FT-IR absorption, and UV-visible absorption spectra. The results of characterization showed that the composites indeed contained both oxide tubes and gold nanoparticles and that the gold nanoparticles were intimately associated with the nanotubes.     

Kinetics of gold nanoparticle aggregation: experiments and modeling

We investigate the aggregation kinetics of gold nanoparticles using both experimental techniques (i.e., quasi-elastic light scattering, UV-visible spectroscopy, and transmission electron microscopy) and mathematical modeling (i.e., constant-number Monte Carlo). Aggregation of gold nanoparticles is induced by replacing the surface citrate groups with benzyl mercaptan. We show that the experimental results can be well described by the model in which interparticle interactions are described by the classical DLVO theory. We find that final gold nanoparticle aggregates have a fractal structure with a mass fractal dimension of 2.1-2.2. Aggregation of approximately 11 initial gold nanoparticles appears to be responsible for the initial color change of suspension. This kinetic study can be used to predict the time required for the initial color change of a gold nanoparticle suspension and should provide insights into the design and optimization of colorimetric sensors that utilize aggregation of gold nanoparticles.     

Synthesis of a stable gold hydrosol by the reduction of chloroaurate ions by the amino acid, aspartic acid

Development of reliable protocols for the synthesis of nanoparticles of well-defined sizes and good monodispersity is an important aspect of nanotechnology. In this paper, we present details of the synthesis of gold nanoparticles of good monodispersity by the reduction of aqueous chloroaurate ions by the amino acid, aspartic acid. The colloidal gold solution thus formed is extremely stable in time, indicating electrostatic stabilization via nanoparticle surface-bound amino acid molecules. This observation has been used to modulate the size of the gold nanoparticles in solution by varying the molar ratio of chloroaurate ions to aspartic acid in the reaction medium. Characterization of the aspartic acid-reduced gold nanoparticles was carried out by UV-visible spectroscopy, thermogravimetric analysis and transmission electron microscopy. The use of amino acids in the synthesis and stabilization of gold nanoparticle in water has important implications in the development of new protocols for generation of bioconjugate materials.     

Controlled interparticle spacing for surface-modified gold nanoparticle aggregates

Aggregation of gold nanoparticles of increasing size has been studied as a consequence of adsorption of 2-aminothiophenol (ATP) on gold nanoparticle surfaces. The capping property of ATP in the acidic pH range has been accounted from UV-vis absorption spectroscopy and surface-enhanced Raman scattering (SERS) studies. The effect of nanoparticle size (8-55 nm) on the nature of aggregation as well as the variation in the optical response due to variable degree of interparticle coupling effects among the gold particles have been critically examined. Various techniques such as transmission electron microscopy, X-ray diffraction, zeta-potential, and average particle size measurement were undertaken to characterize the nanoparticle aggregates. The aggregate size, interparticle distances, and absorption band wavelengths were found to be highly dependent on the pH of the medium and the concentration of the capping agent, ATP. The acquired SERS spectra of ATP relate the interparticle spacing. It has been observed that the SERS signal intensities are different for different sized gold nanoparticles.     

金离子掺杂对二氧化钛光催化性能的影响

利用高压钠灯作光源,在Au^3+-TiO2悬浮溶液中,通过紫外-可见吸光度与TOC测定证实亚甲基蓝能被快速脱色降解。金离子掺杂可大大提高TiO2的光催化活性,金离子的最佳掺杂摩尔分数为0.5%。通过表征催化剂的晶型,化学组成,荧光光谱,紫外-可见吸收光谱,电场诱导表面光电压谱,提示金离子改性的机理,紫外-可见吸收光谱证实金离子掺杂可增强催化剂在可见光区域的吸收能力,由于产生金杂质能级,金离子改性TiO2能被可见光激发。适量的金杂质能降低催化剂的荧光发射强度与电场诱导表面光电压谱强度。根据不同金离掺杂摩尔分数,荧光发射强度与电场诱导表面光电压谱强度从弱到强的排序与光催化活性比强到弱的排序是一致的。     

Ultrafast electronic relaxation and coherent vibrational oscillation of strongly coupled gold nanoparticle aggregates

We report the first direct observation of the ultrafast electronic relaxation and coherent vibrational oscillation of strongly interacting gold nanoparticle aggregates measured by femtosecond laser spectroscopy. The electronic relaxation, reflected as a fast decay component with a time constant of 1.5-2.5 ps, becomes faster with decreasing pump power, similar to earlier observations of isolated gold nanoparticles. Surprisingly, periodic oscillations have been observed in the transient absorption/bleach signal and have been attributed to the coherent vibrational excitation of the gold nanoparticle aggregates. The oscillation period has been found to depend on the probe wavelength. As the probe wavelength is varied from 720 to 850 nm, the period changes from 37 to 55 ps. This suggests that the broad extended plasmon band (EPB) contains contributions from gold nanoparticle aggregates with different sizes and/or different fractal structures. Each of the different probe wavelengths therefore interrogates one subset of the aggregates with similar size or structure. Interestingly, the observed oscillation period for a given aggregate size determined by dynamic light scattering is longer than that predicted based on a elastic sphere model. One possible explanation is that the actual size of the aggregates is larger than what was observed from dynamic light scattering. An alternative, perhaps more likely, explanation is that the vibration of the aggregates is "softer" than that of hard spherical gold nanoparticles possibly because the longitudinal speed of sound is lower in the aggregates than in bulk gold. Persistent spectral hole burning was performed and yielded a hole in the nanoparticle aggregate's extended plasmon band, further supporting that the near-IR band is composed of absorption subbands from differently sized/structured aggregates.     

Gold nanoparticle embedded, self-sustained chitosan films as substrates for surface-enhanced Raman scattering

In this work, self-sustained, biocompatible, biodegradable films containing gold nanostructures have been fabricated for potential application in nanobioscience and ultrasensitive chemical and biochemical analysis. We report a novel synthesis of gold nanoparticles mediated by the biopolymer chitosan. Self-supporting thin films are formed from the resultant gold-chitosan nanocomposite solutions and characterized by UV-visible surface plasmon absorption, transmission electron microscopy, atomic force microscopy, infrared absorption, and Raman scattering measurements. Results demonstrate control over the size and distribution of the nanoparticles produced, which is promising for several applications, including the development of biosensors. As a proof of principle, we demonstrate that gold-chitosan films can be employed in trace analysis using surface-enhanced Raman scattering.     

Gold nanoparticles protected with pH and temperature-sensitive diblock copolymers

Aqueous dispersions of gold nanoparticles protected with a stimuli-sensitive diblock copolymer were studied as a function of pH and temperature. Poly(methacrylic acid)-block-poly(N-isopropylacrylamide), PMAA-b-PNIPAM, copolymer was synthesized using the RAFT technique. A one-pot method utilizing the dithiobenzoate functionalized polymer was used to prepare gold nanoparticles protected with PMAA-b-PNIPAM. The gold nanoparticles coated with block copolymers, with the PNIPAM block bound to the particle surface and PMAA as an outer block form stimuli-sensitive aggregates in water. The changes in the absorption maxima of the surface plasmon resonance, SPR, of the gold particles and in the size of the aggregates were investigated as a function of pH and temperature. pH was observed to affect the size of the aggregates, whereas the effect of temperature was moderate. However, a blue shift in the SPR was observed both with decreasing pH and increasing temperature. Whereas the PMAA blocks control the colloidal stability of the particles and their aggregates, the thermo-sensitive PNIPAM blocks have a noticeable effect on the polarity of the immediate surroundings of the particles.     

An Efficient Route to Prepare Metal Organosols by Phase Transfer Procedure

Silver and gold organosols are easily prepared by transferring nanoparticles from aqueous phase into isooctane with high efficiency (＞90%). Concentrations of sodium oleate and magnesium chloride have crucial effects on the transfer efficiency. Based on the UV-visible absorption spectra, TEM micrographs of nanoparticles, as well as molecular modeling calculation about the adsorption conformation of sodium oleate molecules, a possible phase transfer mechanism is proposed.     

Hybridization of oligonucleotide-modified silver and gold nanoparticles in aqueous dispersions and on gold films

Functionalization of silver and gold nanoparticles by 12mer-thiolated homo-oligonucleotides, SA and ST (containing only adenine or thymine, respectively), and their hybridization and dehybridization in aqueous dispersions have been described. In addition, ST and SA were self-assembled onto gold films and hybridized with their complementary pairs, unlabeled or labeled by gold and silver nanoparticles. The base pairing between DNA strands and the types of oligonucleotides (adenine or thymine) attached to the nanoparticles was detected by Polarization Modulated Fourier Transform Infrared Reflection Absorption Spectroscopy (PM-FTIRRAS).     

Biomimetic synthesis of gold nanoparticles and their aggregates using a polypeptide sequence

The polypeptide sequence MS14 (MHGKTQATSGTIQS) was used to explore a new method for biomimetic preparation of gold nanoparticles and their aggregates. Self‐congregation of gold nanoparticles into aggregates in MS14 aqueous solution and self‐assembly of gold crystallites onto the designed complex of MS14‐PET film [protonated poly(ethylene terephthalate)] proved the specific gold‐binding characteristic of the single‐copy peptide MS14 in vitro. In aqueous solution MS14 could recover Au(III) to Au(0), tested by means of TEM, EDX and XPS. Further research suggested that the pH of the solution and the concentration of Au(III) influenced the morphology and size of the gold nanoparticles formed. In addition, extra reducing agent, sodium citrate, was introduced into the HAuCl₄–MS14 system and uniformly dispersed nanoparticles under neutral condition were obtained. Finally, we discuss the possible mechanism of this biomimetic synthesis. Copyright © 2007 John Wiley & Sons, Ltd.     

Ultrafast cooling of photoexcited electrons in gold nanoparticle-thiolated DNA conjugates involves the dissociation of the gold-thiol bond

Using UV-visible extinction spectroscopy and femtosecond pump-probe transient absorption spectroscopy, we have studied the effect of femtosecond laser heating on gold nanoparticles attached to DNA ligands via thiol groups. It is found that femtosecond pulse excitation of the DNA-modified nanoparticles at a wavelength of 400 nm leads to desorption of the thiolated DNA strands from the nanoparticle surface by the dissociation of the gold-sulfur bond. The laser-initiated gold-sulfur bond-breaking process is a new pathway for nonradiative relaxation of the optically excited electrons within the DNA-modified gold nanoparticles, as manifested by a faster decay rate of the excited electronic distribution at progressively higher laser pulse energies. The experimental results favor a bond dissociation mechanism involving the coupling between the photoexcited electrons of the nanoparticles and the gold-sulfur bond vibrations over one involving the conventional phonon-phonon thermal heating processes. The latter processes have been observed previously by our group to be effective in the selective photothermal destruction of cancer cells bound to anti-epidermal growth factor receptor-conjugated gold nanoparticles.     

Stability of sputter-deposited gold nanoparticles in imidazolium ionic liquids

The stability of gold nanoparticles synthesised by sputter deposition has been studied in situ in 1-butyl-3-methylimidazolium ionic liquids with bis(trifluoromethylsulfonyl)imide, tetrafluoroborate, hexafluorophosphate and dicyanamide anions with UV-VIS absorption spectroscopy and transmission electron microscopy. Besides the growth of the gold nanoparticles, two other processes were observed after sputtering, namely aggregation and sedimentation of these nanoparticles. To model the absorption spectra of the sputtered gold nanoparticles, generalized multiparticle Mie calculations were performed. These theoretical calculations confirm the increase in absorbance at longer wavelength for larger aggregates and are in agreement with the experimental observations. It was found that the kinetics of aggregation and sedimentation scale with the viscosity of the ionic liquid. Small amounts of water were found to have a large detrimental influence on the stability of the colloidal suspensions of the gold nanoparticles in ionic liquids. From the large discrepancy between the theoretical and the experimentally observed stability of the NPs, it was concluded that structural forces stabilize the gold nanoparticles. This was also borne out by AFM measurements.