Solubilities of ionic surfactants in aqueous polymer solutions

Summary Solubility of ionic surfactants in water have been found to increase with added amount of nonionic hydrophilic polymers when both are capable of forming watersoluble complexes. Experiments were carried out with sodium hexadecyl sulfate (SHS) and hexadecyl amine hydrochloride (HAC) below theKrafft points of the respective surfactants. The solubility increment of the surfactants brought about by the polymers depends upon the kind of polymers, their molecular weight, concentration and temperature. The results have been interpreted on the basis of the amount of surfactants bound to the polymers and by the properties of the polymer-surfactant complexes formed. It is noteworthy that the anionic surfactant (SHS) can be bound to polymers much more extensively than the cationic surfactant (HAC).

---

Zusammenfassung Die L?slichkeit von ionischen Benetzern in Wasser w?chst mit dem zugefügten Betrag an nicht-ionischen hydrophilen Polymeren, wenn beide zusammen wasserl?sliche Komplexe büden k?nnen. Versuche wurden mit Natrium-hexadecyl-sulfat (SHS) und Hexadecylamin-hydrochlorid (HAC) ausgeführt, und zwar unter denKrafft-Punkten der bezüglichen Benetzer. Das L?slichkeitsinkrement der Benetzer, gegeben durch die Polymeren, h?ngt von der Art des Polymeren, dessen Molekulargewicht, Konzentration und Temperatur ab. Die Ergebnisse werden interpretiert auf der Grundlage des Betrages an Benetzer, der an das Polymere gebunden ist, und durch die Eigenschaften des Komplexes Polymer/Benetzer. Es ist bemerkenswert, da? der anionische Benetzer (SHS) viel st?rker an das Polymere gebunden werden kann als der kationische Benetzer (HAC).

     

Dynamic tension and adsorption behavior of aqueous lung surfactants

The dynamic tension behavior, at constant or at pulsating area conditions, of two commercial lung surfactants in saline is reported. The bubble method, at constant or pulsating area, at 37°C and the pendant drop method at 23°C were used. For Exosurf, a commercial synthetic lung surfactant consisting of dissolved tyloxapol and dispersed dipalmitoylphosphatidylcholine (or DPPC) and hexadecanol (H), the equilibrium and dynamic tensions are high (over 30 mN m⁻¹) and similar to those of tyloxapol alone. Aqueous DPPC/H mixtures have lower tensions than Exosurf. Survanta, a commercial lung surfactant replacement drug consisting of DPPC, other lipids, and two hydrophobic lung surfactant proteins, produces dynamic surface tensions that are substantially lower than those of Exosurf. Diluted 10-fold, Survanta produces under pulsating area (at 20 cycles min⁻¹) lower minimum tensions than undiluted Survanta (6 vs. 12 mN m⁻¹), but higher maximum tensions. In addition, Survanta tension behavior is unusual, having three local maxima and three local minima per cycle, suggesting major variations of its surface composition in each cycle. Monolayer pressure-area isotherms and Fourier transform infrared-attenuated total reflection (FTIR-ATR) spectroscopy results on deposited Langmuir–Blodgett films support this suggestion. They also provide direct evidence of the presence of phospholipids (DPPC or others) on the surface, but only indirect evidence of the presence of other components, on the surface of aqueous Exosurf or Survanta.     

Equilibrium surface tension of aqueous surfactant solutions

Summary The applicability of the drop weight method for determining time dependent surface tension of surfactant solutions was experimentally proved.The presence of CO₂ and traces of lauryl alcohol and long chain homologs lower the surface tension of sodium dodecyl sulfate solutions in a measurable extent. The chemical purification of materials and recrystallizations are insatisfactory to obtain sufficient purity; the cleaning of the surface itself is needed by e.g. foaming. The equilibrium surface tension of pure surfactant solutions that is often required to interpret interfacial phenomena and to calculate theGibbs adsorption excess can be determined with reliable accuracy by linear extrapolation to zero time from measurements made in function of time up from 1 minute on moderately contaminated solutions.As a criterion of surface purity the time dependence of surface tension and the average life-time of thin liquid film are suggested.

---

Zusammenfassung Die Tropfengewichtsmethode eignet sich auch zur Bestimmung der zeitabhängigen Oberflächenspannung wäßriger Tensidlösungen. Zur Entfernung von Verunreinigungen, die die Oberflächenspannung von Natriumdodecylsulfatlösungen herabsetzen, wie Spuren von Laurylalkohol und höheren Homologen, reichen weder chemische Methoden noch wiederholtes Umkristallisieren aus, sondern die Oberfläche selbst ist zu reinigen, z. B. durch Ausschäumen. Der Gleichgewichtswert der Oberflächenspannung läß sich mit hinreichender Genauigkeit berechnen, in dem man die an mäßig konzentrierten Lösungen über einer Minute Meßzeit gewonnenen Daten auft = 0 linear extrapoliert. Als praktisches Kriterium für die Reinheit der Oberfläche kann man sowohl die Zeitabhängigkeit der Oberflächenspannung, wie auch die mittlere Lebensdauer von dünnen Lösungsfilmen heranziehen.

---

---

With 6 figures     

Dynamic surface tension behavior of aqueous solutions ofN-dodecyl-N,N dimethyl aminobetaine chlorohydrate

The adsorption behavior ofN-dodecyl-N,N dimethyl aminobetaine chlorohydrate (DDAB·HCl) at the air/aqueous interface was studied for solutions in pure water and phosphate buffer (pH=7.4). The equilibrium surface tension versus concentration curves were used to estimate the equilibrium adsorption parameters and CMCs. The buffer solution has a lower CMC and shows higher surface activity below the CMC than the pure water solution. Data and calculations of the dynamic tension behavior at constant-area conditions showed that the adsorption processes of DDAB·HCl solutions are about 10 to 300 times slower than those predicted by a diffusion-controlled model. A mixed kinetics adsorption model with a modified Langmuir-Hinshelwood kinetic equation, which considers an activation energy barrier for adsorption, was applied to find the kinetic adsorption parameters. The dynamic tension behavior at pulsating-area conditions with large amplitude was also examined for frequencies up to 90 cycles/min. The tension amplitude responses depended strongly on the concentration and frequency. Comparisons of diffusion-controlled model predictions and pulsating area tension data confirmed the need to use a mixed kinetics model. The latter model can improve the fit over the diffusion-controlled model, but it does not quantitatively match the observed tensions.     

Formation of ionic associates by Phenol Red and their interaction with ionic surfactants in aqueous solutions

Formation of associates between single-or double-charged anions of sulfophthalein dye Phenol Red and single-charged cations of cyanines in aqueous solutions was considered. The association constants were estimated from the spectral data. Geometric and energy characteristics of the associates were calculated. The suitability of the associates formed by Phenol Red for quantitative determination of cationic surfactants in aqueous solutions was examined.     

Conductivity of micellar solutions of ionic surfactants and surface conductivity of micelles

Within the effective medium model, a method is proposed for determining the surface conductivity of micelles. The known experimental data on the conductivity of aqueous sodium dodecyl sulfate micellar solutions are analyzed employing the developed approach. Specific surface conductivity λ_s of micelles is shown to be 10⁻⁸Ω⁻¹. The high values of λ_s are indicative of a noticeable contribution of the dense part of the electrical double layer, which is comparable with the contribution of its diffuse part, to the micellar solution conductivity. This estimate is strongly dependent on the initial information obtained in different studies. The marked influence of the micelle surface conductivity on the effective conductivity of micellar solutions allows one to put the question of the correctness of the method commonly used to determine the degree of counterion binding from the slopes of the dependences of the solution conductivity on the overall surfactant concentrations in the premicellar and micellar regions.     

Surface potential and surface tension of aqueous 2-halogenoethanol-ethanol solutions

The surface properties of aqueous 2-fluoro-, 2-chloro-, 2-bromoethanol-ethanol mixtures were studied by surface tension measurements, applying the drop weight method, and by surface potential using the flowing jet method. The addition of ethanol to 2-halogenoethanol solutions causes a synergetic effect on surface tension. In the case of surface potential the synergetic influence exists only in the mixtures of ethanol-2-fluoroethanol. The studies on the surface interactions of the adsorbed molecules of particular components in the mixed film were carried out by the Rosen and Hua method. The weak interaction between adsorbed molecules was observed.     

Dynamic surface tension and adsorption mechanisms of surfactants at the air-water interface

Recent advances in understanding dynamic surface tensions (DSTs) of surfactant solutions are discussed. For pre-CMC solutions of non-ionic surfactants, theoretical models and experimental evidence for a mixed diffusion-kinetic adsorption mechanism are covered. For micellar solutions of non-ionics, up to approximately 100 x CMC, the DST behaviour can also be accounted for using a mixed mechanism model. Finally, the first reported measurements of the dynamic surface excess Gamma(t), using the overflowing cylinder in conjunction with neutron reflection, are described.     

Enthalpy-entropy compensation of ionic liquid-type Gemini imidazolium surfactants in aqueous solutions: a free energy perturbation study

Hierarchical nanocrystalline ZSM-5 zeolite (NZ5) was synthesized at 100 °C under atmospheric pressure using methylamine as a mineralizing agent. The crystallization process of NZ5 was characterized by dynamic light scattering (DLS), X-ray diffraction (XRD), and infrared spectroscopy (FTIR). The results of contrastive experiments showed that evaporation of the solvent promoted the aggregation of primary particles, and the addition of methylamine accelerated the crystallization process. The NZ5 aggregate consisted of 20 nm individual particles, as shown in scanning electron microscope (SEM). The lattice fringes in the transmission electron microscope (TEM) images and the XRD results indicated that individual particles of NZ5 were highly crystalline. N(2) adsorption-desorption isotherms showed that NZ5 had high BET surface areas with mesopores having a mean diameter of about 9 nm. NZ5 exhibited a long lifetime, a stable and high yield of liquid hydrocarbons, and a high anti-coking performance in methanol-to-hydrocarbons reaction. Catalytic testing and TGA results showed that the lifetime of NZ5 was about ten times longer than that of micro-sized ZSM-5 zeolite (MZ5), and the average coking rate with NZ5 was one fifth over that of MZ5.     

Surface tension of ionic liquids and ionic liquid solutions

Some of the most active scientific research fronts of the past decade are centered on ionic liquids. These fluids present characteristic surface behavior and distinctive trends of their surface tension versus temperature. One way to explore and understand their unique nature is to study their surface properties. This critical review analyses most of the surface tension data reported between 2001 and 2010 (187 references).     

Dynamic surface tension,critical micelle concentration,and activity coefficients of aqueous solutions of nonyl phenol ethoxylates

Dynamic surface tensions, σ(t) for aqueous solutions of nonyl phenol ethoxylates (NPEOs) at the temperature 298.15 K were measured using a Lauda drop volume tensiometer. The non-ionic surfactants analyzed in this work were Tergitol NP-9, NP-35 and NP-40. By using the classical Ward and Torday equation, the diffusion coefficient for each bulk surfactant concentration was calculated. The equilibrium surface tension values were determined by extrapolating the dynamic surface tension to t → ∞ on the σ(t) vs. t^−1/2 curves. These values were used to determine the critical micelle concentrations (CMC) of the surfactant aqueous solutions as well as to calculate the infinite dilution activity coefficient of the surfactant, following a model that combines the Volmer surface equation of state and the Gibbs adsorption equation.     

Experiments and model for the surface tension of carbonated monoethanolamine aqueous solutions

The surface tension of carbonated monoethanolamine aqueous solutions from 293.15 to 323.15 K was measured by using an automatic surface tension-meter.A model applicable for the surface tension of MEA-CO2-water mixtures was proposed and the calculated results agreed well with the experiments.The influences of temperature,MEA concentration and CO2 loading were demonstrated on the basis of experiments and calculations.     

MEA-CO2-水溶液表面张力实验和模型

用全自动表面张力仪测定了293．15-323．15K温度范围内,具有不同C02载荷的乙醇胺（Monoethanolamine,MEA）水溶液的表面张力,提出了计算MEA-CO2-水体系表面张力的半经验模型,计算结果与实验值吻合良好．通过实验和计算相结合,阐明了温度、MEA浓度和C02载荷对MEA-CO2-水体系表面张力的影响规律．     

Viscosity of aqueous micellar solutions of surfactants

The viscosity of aqueous micellar solutions of two long-chain surfactants, C₂₄H₄₃N₂ClO and C₂₁H₃₈NCl, is studied in a concentration range of 10^?4?C10^?2 mol/L and a temperature range of 20?C40°C. It is established that, in the region of critical micelle concentration, the viscosity is a nonmonotonic function of concentration and has minima and maxima.     

Dynamic adsorption and surface tension of aqueous dilauroylphosphatidylcholine dispersions under physiological conditions

The dynamic surface tension and equilibrium adsorption behavior of DLPC dispersions in phosphate buffer saline at 37 and 25 degrees C was studied with tensiometry, infrared reflection--absorption spectroscopy (IRRAS), and ellipsometry. The results are compared with those in water (Pinazo et al. Langmuir 2002, 18, 8888). Even though the pH and salinity have no apparent effect on the equilibrium surface tension and the surface pressure--area isotherm, they affect the dynamic surface tension by decreasing the adsorption rate and increasing the dynamic tension minima at a pulsating area of 20 or 80 cycles per minute. Moreover, IRRAS and ellipsometry results show that the adsorbed layers and the spread monolayers have larger area per molecule, or looser packing, in buffer than in water. A new hypothesis is proposed to elucidate the effect of pH/salinity on this zwitterionic surfactant: there is some specific interaction or binding between the ions from the buffer saline with the polar headgroups of DLPC. This interaction induces stronger intermolecular repulsions of the surfactant layer in buffer than that in water, despite the expected electrostatic screening effect, and causes higher dynamic surface tensions. The results have implications in designing lung surfactant replacement formulations.     

Impact of carbon dioxide on the surface tension of 1-hexanol aqueous solutions

Effects of carbon dioxide presence on the surface tension and adsorption kinetics of 1-hexanol solutions were investigated. Experiments were performed at a range of carbon dioxide vapor pressures and varying concentrations of 1-hexanol aqueous solution. Both dynamic and steady-state surface tensions of 1-hexanol aqueous solution were found to decrease with carbon dioxide pressure, and a linear relationship was observed between the steady-state surface tension and carbon dioxide pressure. To explain the experiments, adsorption and desorption of the two species (1-hexanol and carbon dioxide) from two sides of the vapor-liquid interface were considered. A modified Langmuir isotherm, the modified Langmuir equation of state and the modified kinetic transfer equation were developed. The resulting steady-state and dynamic surface tension data were modeled using the modified Langmuir equation of state and the modified kinetic transfer equation, respectively. Equilibrium constants and adsorption rate constants of 1-hexanol and carbon dioxide were evaluated through a minimization procedure for CO₂ pressures ranging from 0 to 690 kPa. From the steady-state modeling, the equilibrium parameters for 1-hexanol and carbon dioxide adsorption from vapor phase and liquid phase were found unchanged at different pressures of carbon dioxide. From the dynamic modeling, the adsorption rate constants for 1-hexanol and carbon dioxide from vapor phase and liquid phase were found to decrease with carbon dioxide pressure. Some fluctuations in the fitting parameters of the dynamic modeling (adsorption rate constants) were observed. These fluctuations may be due to experimental errors, or more likely the limitations of the model used. A major limitation of the model is related to large differences in adsorption/desorption between initial and final stages of the process, and a single set of property parameters cannot describe both initial and final states of the system. Variations may occur depending on which set of data, of initial or final states, is used in the model predictions over the entire time range.     

Influence of electrolytes on the dynamic surface tension of ionic surfactant solutions: expanding and immobile interfaces

Here, we derive analytical asymptotic expressions for the dynamic surface tension of ionic surfactant solutions in the general case of nonstationary interfacial expansion. Because the diffusion layer is much wider than the electric double layer, the equations contain a small parameter. The resulting perturbation problem is singular and it is solved by means of the method of matched asymptotic expansions. The derived general expression for the dynamic surface tension is simplified for the special case of immobile interface and for the maximum bubble pressure method (MBPM). The case of stationary interfacial expansion is also considered. The effective diffusivity of the ionic surfactant essentially depends on the concentrations of surfactant and nonamphiphilic salt. To test the theory, the derived equations are applied to calculate the surfactant adsorption from MBPM experimental data. The results excellently agree with the adsorption determined independently from equilibrium surface-tension isotherms. The derived theoretical expressions could find application for interpreting data obtained by MBPM and other experimental methods for investigating interfacial dynamics.