NHC–Pd(II)–Im (NHC=N-heterocyclic carbene,Im=1-methylimidazole) complex catalyzed coupling reaction of arylboronic acids with carboxylic acid anhydrides in water

A well-defined N-heterocyclic carbene (NHC)–palladium chloride–imidazole complex exhibited high catalytic activity in the coupling reaction of arylboronic acids with carboxylic acid anhydrides in pure water under mild conditions. Under the optimal conditions, all reactions gave the desired coupling products in moderate to high yields.     

Well-defined NHC–Pd(II)–Im (NHC=N-heterocyclic carbene; Im=1-methylimidazole) complex catalyzed C–N coupling of primary amines with aryl chlorides

We report herein a well-defined NHC–Pd(II)–Im (NHC=N-heterocyclic carbene; Im=1-methylimidazole) complex catalyzed C–N coupling of primary amines with aryl chlorides. Under the optimal reaction conditions, a variety of primary amines can be coupled with aryl chlorides to give the amination products in good to high yields within 4 h. It is worthy of noting here that the NHC–Pd(II)–Im complex showed especially high catalytic activity toward challenging sterically hindered substrates including both of aryl amines and aryl chlorides. In addition, alkyl amines were also proved to be suitable reaction partners to give the corresponding amination products in good to high yields.     

Synthesis,crystal and molecular structure of the “slipped” sandwich complex [Ni(η5-P3C2R2)(η3-P2C3R3)] (R = But)

The synthesis of the novel “slipped” sandwich compound [Ni(η⁵-P₃C₂R₂)(η³-P₂C₃R₃)] (R = Bu^t) is described. The mode of attachment of the P₃C₂R₂ and P₂C₃R₃ rings has been determined by NMR spectroscopy and a single crystal X-ray diffraction study.     

Synthesis, crystal, and molecular structure of the solvated complex [MoO2(L)] · DMF (L2− = 2-[N-(2-hydroxynaphthylidene)amino]propane-1,2,3-triol anion)

A new dioxomolybdenum(VI) complex, [MoO₂(L)] · DMF, where L^2? = 2-[N-(2-hydroxynaphthylidene)amino]propane-1,2,3-triol, has been synthesized. Its structure has been determined by X-ray diffraction analysis. The Mo atom is octahedrally coordinated by two oxo ligands that are in cis-positions with respect to each other, two oxygen atoms, the nitrogen atom of the tridentate bis(chelate) ligand L, and the DMF oxygen atom.     

[(NHC)CrCl(μ-Cl)(THF)]_2 and(NHC)_2CrCl_2(NHC=1,3-Diisopropyl-4,5-dimethylimidazole-2-ylidene):Syntheses,Structures,and Polymerization Activities

The preparation of divalent chromium N-heterocyclic carbene(NHC,1,3-diisopropyl4,5-dimethylimidazole-2-ylidene) compounds is reported.The reaction of 1:1 molar ratio of NHC with CrCl2 led to an isolation of [(NHC)CrCl(μ-Cl)(THF)]2(1),while that of 2:1 ratio resulted in the formation of(NHC)2CrCl2(2).1 can be considered as an intermediate in the formation of 2 and further converted into 2 by the addition of another equiv.of NHC.The reaction of 2 with CpNa afforded an ion pair compound [(NHC)2CrCp]+[Cp]-(3),indicating a strong coordination ability of NHC supplanting one of the ionic Cr-Cp bonding.In combination of methylalumoxane(MAO) as cocatalyst 1 and 2 both are active for catalyzing ethylene polymerization.     

Photocatalytic reduction of CO2 using cis,trans-[Re(dmbpy)(CO)2(PR3)(PR’3)]+ (dmbpy=4,4′-dimethyl-2,2′-bipyridine)

Photocatalysis of biscarbonylrhenium complexes cis,trans-[Re(dmbpy)(CO)₂(PR₃) (PR′₃)]⁺ (dmbpy=4,4′-dimethyl-2,2′-bipyridine: R, R′=Ph (1a ⁺); p-FPh (1b ⁺); R=Ph, R′=OEt (1c ⁺); R, R′=O-i-Pr (1d ⁺)) is reported for the first time. The rhenium complexes with two triarylphosphine ligands (1a ⁺, 1b ⁺) efficiently photocatalyzed CO₂ reduction with triethanolamine as a sacrificial donor. On the other hand, the complexes with one or two trialkylphosphite ligand(s) (1c ⁺, 1d ⁺) had low photocatalytic abilities under the same reaction conditions.     

Hydrogenation of C?C Multiple Bonds Mediated by [Pd(NHC)(PCy3)] (NHC=N‐Heterocyclic Carbene) under Mild Reaction Conditions

N‐Heterocyclic carbenes do it again! [Pd(SIPr)(PCy₃)] ( 1 ; SIPr=N,N′‐(bis(2,6‐diisopropylphenyl)imidazolidine), which is stable under H₂, was shown to be a highly active catalyst for the hydrogenation of a wide range of alkenes and alkynes. Reactions proceed under mild conditions (relatively low Pd loading, RT, low pressures of H₂) even when sterically hindered alkenes (tri‐ and tetra‐substituted) are used.

     

Mono- and dinuclear palladium(II) compounds containing nitrogen ligands. Crystal and molecular structure of [Pd(N,C-dmba)(NCO)(2,3-lut)] and [Pd(H2CCOMe)Cl(2,2′-bipy)]

The cyanate-bridged cyclopalladated compound [Pd(N,C-dmba)(-NCO)]₂ (1)(dmba = PhCH₂NMe₂) reacts in CH₂Cl₂ with 2,3-lutidine (2,3-lut), 3,4-lutidine (3,4-lut), 2,2-bipyridine (2,2-bipy) and 4,4-bipyridine (4,4-bipy), to give [Pd(N,C-dmba)(NCO)(2,3-lut)](2), [Pd(N,C-dmba)(NCO)(3,4-lut)](3), [{Pd(N,C-dmba)(NCO)}₂(-2,2-bipy)]· CH₂Cl₂ (4) and [{Pd(N,C-dmba)(NCO)}₂(-4,4-bipy)]· CH₂Cl₂ (5), respectively. The compounds were characterized by elemental analysis, i.r. and n.m.r. spectroscopy and also by t.g.a. The i.r. spectra of (2–5) display typical bands of monodentate N-bonded cyanate groups, whereas the n.m.r. data of (4) are consistent with the presence of a bridging 2,2-bipyridine ligand. Complex (4) decomposes slowly in acetone. One of the products formed, [Pd(H₂CCOMe)Cl(2,2-bipy)](6), was characterized by X-ray diffraction. As inferred from the t.g.a., the thermal stability decreases in the order:[{Pd(N,C-dmba)(NCO)}₂(-4,4-bipy)].CH₂Cl₂ (5) > [Pd(N,C-dmba)(2,3-lut)(NCO)](2)=[Pd(N,C-dmba)(3,4-lut)(NCO)](3) > [{Pd(N,C-dmba)(NCO)}₂(-2,2-bipy)]· CH₂Cl₂ (4). According to thermal analysis and X-ray diffraction patterns compounds (2–3) decompose into metallic palladium Pd(0), whereas (4–5) decompose with the formation of PdO. The X-ray crystal and molecular structure of [Pd(N,C-dmba)(NCO)(2,3-lut)](2) was determined. The lutidine unit is perpendicular to the coordination plane.     

Metallation of the methyl group ino-nitrosotoluene: synthesis and the molecular structure of the binuclear complex [o-(NO)(CH2)C6H4)]2Pd2(μ-OOCCF3)2

The reaction of the tetranuclear cluster Pd₄(CO)₄(OOCCF₃)₄ witho-nitrosotoluene afforded the Pd¹¹-containing complex [o-(NO)(CH₂)C₆H₄]₂Pd₂(μ-OOCCF₃)₂. The elimination of CO₂ and the formation of organic products of transformation of tolylnitrene species (azotoluene, ditolylamine, and tolylisocyanate) were observed in the course of the reaction. The title complex was characterized by IR and¹H NMR spectroscopy. Its structure was established by X-ray diffraction analysis. It was suggested that the reaction proceeds through intermediate formation of nitrene complexes. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 1, pp. 147–150, January, 2000.     

The synthesis,structure and reactions of the novel cationic bisbut-2-yne complex [W(CO)(NCMe)(S2CNC4H8)(η2-MeC2Me)2][BPh4]

The complex [WI(CO)(S₂CNC₄H₈)(η²-MeC₂Me)₂] reacts with an equimolar amount of Na[BPh₄] in acetonitrile at room temperature to give the cationic bisbut-2-yne complex [W(CO)(NCMe)(S₂CNC₄H₈)(η²-MeC₂Me)₂][BPh₄] (1) by replacement of an iodide ligand by acetonitrile. The crystal structure of 1 has been determined and reveals a pseudo-octahedral geometry with the mid points of the two cis-but-2-yne ligands approximately coplanar with the sulphur atoms of the dithiocarbamate ligand. Carbon monoxide and acetonitrile occupy the axial sites. ¹³C NMR spectroscopy shows the two but-2-yne ligands in 1 donate a total of 6 electrons to the tungsten. Preliminary studies of the chemistry of 1 are also described.     

Structure,synthesis, and thermal properties of trans-[Ru(NO)(NH3)4(SO4)]NO3·H2O

In treatment of trans-[Ru(NO)(NH₃)₄(OH)]Cl₂ with concentrated sulfuric acid on heating trans-[Ru(NO)(NH₃)₄(SO₄)](HSO₄)·H₂O (I) is obtained with a yield close to quantitative. In the interaction of the saturated solution of I with a saturated NaNO₃ solution a trans-[Ru(NO)(NH₃)₄(SO₄)]NO₃·H₂O (II) precipitate forms whose structure is determined by single crystal XRD: space group P2₁2₁2₁, a = 6.8406(3) Å, b = 12.6581(5) Å, c = 13.3291(5) Å. A monodentately coordinated sulfate ion is in the trans-position to the nitroso group. Compound II is characterized by IR spectroscopy, powder XRD, and diffuse reflectance spectroscopy. The process of its thermolysis is studied; by differential scanning calorimetry the thermal effect of the dehydration reaction occurring on heating to 120°C (ΔH = 58.9 ± 1.5 kJ/mol) is estimated. The final product of the thermolysis of II is a mixture of Ru and RuO₂.     

Synthesis and structure of the first molybdenum compound of N,O,N-hydroxybis(2-pyridyl)methanolato (η 3-dpkO,OH). The structure of [Mo(O)2(μ-O)(η 3-dpkO,OH)]2 · 2dmso

When di-2-pyridyl ketone (dpk) was allowed to react with [Mo(CO)₆] in toluene under reflux in air [Mo(O)₂(μ-O)(η ³-dpkO,OH)]₂ where η ³-dpkO,OH is N,O,N-hydroxybis(2-pyridyl)methanolato was isolated. Infrared and ¹H-NMR spectral data measured on solutions of the isolated compound indicate the absence of the carbonyl groups and the presence of coordinated η ³-dpkO,OH, terminal and bridging oxo-groups and elemental analysis confirmed the formulation of the product as [Mo(O)₂(μ-O)(η ³-dpkO,OH)]₂. Crystals of [Mo(O)₂(μ-O)(η ³-dpkO,OH)]₂·2dmso obtained from a dimethyl sulfoxide (dmso) solution of [Mo(O)₂(μ-O)(η ³-dpkO,OH)]₂ are in the monoclinic P2₁/c space group. X-ray structural analysis confirmed the identity of [Mo(O)₂(μ-O)(η ³-dpkO,OH)]₂ and shows a dioxomolybdenum oxo-bridged dimer with two terminal oxygen atoms and one tridentate N,O,N-dpkO,OH occupying the coordination sites of the high-valent molybdenum(VI) in a pseudo-octahedral coordination geometry. The molecular packing shows parallel stacks of [Mo(O)₂(μ-O) (η ³-dpkO,OH)]₂·2dmso and disclose an extensive network of non-covalent interactions within each stack.     

An oxo-centered carboxylate-bridged trinuclear complex: synthesis,crystal structure,and magnetic properties of [Cr3(μ3-O)(HL)2(H2O)3](ClO4)3

A new complex [Cr₃(μ₃-O)(HL)₂(H₂O)₃](ClO₄)₃, L = 1,4,7-triazacyclononane-N,N′,N′′-tripropionate(tacntp), has been synthesized and structurally characterized. The complex crystallizes in the orthorhombic, space group Pccn, with unit cell parameters a = 18.245(3) Å, b = 18.955(3) Å, c = 27.806(4) Å, α = 90°, β = 90°, γ = 90°. The complex has a trimetallic structure with three metal ions at the corners of a nearly equilateral triangle and the center occupied by a triply-bridging oxygen. Variable-temperature magnetic susceptibility indicates that the total spin value of the ground state is 3/2.     

Modulation of properties in analogues of Zeise's anion on changing the ligand trans to ethene. X-ray crystal structures of trans-[PtCl2(OH)(η2-C2H4)]- and trans-[PtCl2(η1-CH2NO2)(η2-C2H4)]-

To get further insight in the reaction of nucleophilic substitution upon changing the ligand trans to a η(2)-olefin, the reactivity of some monoanionic platinum(II) complexes (trans-[PtCl(2)X(η(2)-C(2)H(4))](-), X = Cl(-), 1, OH(-), 2, and CH(2)NO(2)(-), 3) towards pyridines with different steric hindrance (py, 4-Mepy, and 2,6-Me(2)py) has been tested. All crystallographic (2 and 3 reported for the first time) and spectroscopic data are in accord with a platinum-olefin interaction decreasing in the order 2 > 1 > 3, paralleling the decreasing electronegativity of the donor atom (O > Cl > C). Not only the platinum-olefin bond but also the bond between platinum and the ligand trans to the olefin appear to be strongest in 2 (Pt-O distance at the lower limit for this type of bond). In the reaction with py, the ligand trans to the olefin is displaced in 1 and 2. Moreover the reaction is in equilibrium in the case of sterically hindered 2,6-Me(2)py, the equilibrium being shifted moderately or prevalently toward the reagents in the case of 1 and 2, respectively. In the case of 3, the reaction with pyridines leads to substitution of the olefin instead of the carbanion. This is in accord with the observation that carbanions strongly weaken the trans Pt-olefin bond.     

Theoretical studies on Ru(fppz)_2(CO)L (L=N-heterocyclic ligand):Electronic structure,absorption,phosphorescence,and solvatochromism

A series of ruthenium(II) complexes Ru(fppz)2(CO)L [fppz = 3-trifluoromethyl-5(2-pyridyl)pyrazole; L = pyridine (1), 4-dimethylaminopyridine (2), 4-cyanopyridine (3)] were designed and investigated theo-retically to explore their electronic structures, absorption, and emissions as well as the solvatochrom-ism. The singlet ground state and triplet excited state geometries were fully optimized at the B3LYP/LANL2DZ and CIS/LANL2DZ level, respectively. The HOMO of 1-3 is composed of dyz(Ru) atom and π(fppz). The LUMO of 1 and 2 is dominantly contributed by π*(fppz) orbital, but that of 3 is con-tributed by π*(L). Absorption and phosphorescence in vacuo, C6H12, and CH3CN media were calculated using the TD-DFT level of theory with the PCM model based on the optimized ground and excited state geometries, respectively. The lowest-lying absorption of 1 and 2 at 387 and 391 nm is attributed to {[dyz(Ru) π(fppz)] → [π*(fppz)]} transition, but that of 3 at 479 nm is assigned to {[dyz(Ru) π(fppz)] → [π*(L)]} transition. The phosphorescence of 1 and 2 at 436 and 438 nm originates from 3{[dyz(Ru) π(fppz)] [π*(fppz)]} excited state, while that of 3 at 606 nm is from 3{[dyz(Ru) π(fppz)] [π*(L)]} excited state. The calculation results showed that the absorption and emission transition character can be changed from MLCT/ILCT to MLCT/LLCT transition by altering the substituent on the L ligand. The phosphorescence of 1 and 2 does not have solvatochromism, but that of 3 at 606 nm (vacuo), 584 nm (C6H12), and 541 nm (CH3CN) is strongly dependent on the solvent polarity, so introducing elec-tron-withdrawing group on ligand L will induce remarkable solvatochromism.     

Synthesis, crystal structure, and luminescence of a new complex [Co(6,6′-Bpbc)(Phen)(H2O)] · 2EtOH

A novel complex constructed with [Co(6,6′-Bpbc)(Phen)(H₂O)] · 2EtOH (6,6′-Bpbc = 2,2′-bipyridine-6,6′-dicarboxylic acid, Phen = 1,10-phenanthroline) has been successfully synthesized and characterized by X-ray diffraction, and elementary analysis. The photoluminescence properties of this complex were also studied. In the crystal, the cobalt(II) ion adopts the formation of a heptacoordination environment, and the structure units aggregate together to give birth to the infinite 1D chains, 2D-networks, and 3D-frameworks through either hydrogen bonding or π···π-stacking interaction between the aromatic rings.     

The oxidative addition of 1-haloalkanes to monomeric trans-[Rh(X(CO)(PR3)2] (X  Cl,Br; R  aryl) and dimeric trans-[Rh(μ-X)(CO)(PPh3)]2 (XCl,I)

The oxidative addition of 1-bromopropane to trans-[RhBr(CO){P(p-EtC₆H₄)₃}₂] has been found to follow pseudo first-order kinetics and give only an acylrhodium(III) product. The reaction is not catalysed by added bromide ion in chloroform solution, indicating that an anionic intermediate such as [RhBr₂(CO){P(p-EtC₆H₄)₃}]⁻ does not play an important part in this reaction. The oxidative addition of iodomethane to trans-[Rh(μ-X)(CO)(PPh₃)]₂ (X  Cl and I) is pseudo first-order, the reactivity increasing on replacing chloride by iodide.     

The reaction of CpWMe(CO)3 with LiEt3BH. Formation of the formyl complex trans-[CpWMe(CHO)(CO)2]− and the (hydrido)(acyl) complex trans-[CpWH(COMe)(CO)2]−

Addition of LiEt₃BH to CpWMe(CO)₃ results in consecutive formation of trans-[CpWMe(CHO)(CO)₂]⁻ (some of which exists in solution as two rotamers of a BEt₃ adduct) and trans[CpWH(COMe)(CO)₂]⁻. Reaction of the latter with CHI₃ and subsequent treatment of the product with either (i) Me₃SiCl, followed by filtration through SiO₂ or (ii) Me₃OBF₄ gives hydroxy- or methoxy-carbenes CpWI[C(OR)Me](CO)₂ (R H or Me), respectively.     

Cyclooctaselenadiazole: synthesis,decomposition pathway,and reaction with (η5-C5H5) Co(L)2 (L = C2H4, PPh3). Crystal and molecular structure of [(η5-C5H5)CO]2(μ2-η3,η2-C8H6Se)

Thermolysis of cyclooctaselenadiazole (2) yields only selenium-containing products. Compound 2 reacts with CpCo sources to give [(η⁵-C₅H₅)CO]₂(μ₂η³,η²-C₈H₆Se), a fluxional compound whose structure has been determined by X-Ray crystallography.