Variation of atmospheric tritium concentrations in three different chemical forms in Fukuoka, Japan

Atmospheric tritium concentrations of tritiated water vapor (HTO), tritiated hydrogen (HT) and tritiated hydrocarbons (primarily tritiated methane, CH₃T) have been measured in Fukuoka prefecture, Japan from 1984 to the present to establish a general database on the behavior of atmospheric tritium. HTO concentrations expressed in Bq/l-H₂O vary within a range of 1.19 to 2.45, giving an overall average value of 1.86±0.077. HTO concentrations expressed in-mBq/m³-air vary within a range of 7.8 to 46.1 and have a strong correlation with the atmospheric humidity, being high in the summer and low in winter. In the case of HT and CH₃T, no seasonal variations were observed with average monthly values of 23.1 to 61.0 mBq/m³-air and 8.3 to 23.9 mBq/m³-air, respectively. The present HTO concentrations are already close to the tritium level before nuclear testings. However, the present HT and CH₃T concentrations are still higher by a factor of about 140 and 30, respectively, than those before the testings. Specific activities are estimated to be 14.6–16.7 TU for HTO, 5.5·10⁵–1.0·10⁶ TU for HT and 3.2·10⁴–4·10⁴ TU for CH₃T. The apparent difference in the specific activities suggests a very slow transformation of these species in the atmosphere or a continuous supply of HT and CH₃T with high specific activity. Residence time for atmospheric HT was found to be 6.5 years over the period 1988–92 and 10 years for 1988–95. These times are longer than 4.8 years given by Mason and Östlund in the 1970s, and thus indicate a supply to the atmosphere of HT from various tritium sources.     

Relation between chemical composition of sols and surface free energy of inorganic-organic films

The presented study deals with relation between chemical composition of precursor sols and surface free energy of inorganic-organic films. Inorganic-organic films were prepared from precursor sols in “tetraethoxysilane (TEOS) - triethoxy(octyl)silane (OTES) - distilled water - nitric acid - isopropyl alcohol” system. The fifteen sols were prepared, where the ratio of K?=?x(OTES)/(x(TEOS)?+?x(OTES)) varied from 0 to 0.5 and ratio of R?=?x(H₂O)/(x(TEOS)?+?x(OTES)) varied from 2 to 6. The relationship between chemical composition and surface free energy of inorganic-organic films was quantified by model selection approach. Model, which describes the studied relationship in the best way, was selected on the basis of Akaike information criterion. Based on the analysis of selected (the best describing) model, it was found out that the surface free energy as well as its dispersion and polar component are dependent only on K ratio in observed range of K and R values. Form the physico-chemical aspect, the observed dependences of surface free energy, its dispersive and polar component on chemical composition of precursor sols are explained by the influence of octyl groups on the sequences of hydrolysis and condensation reactions leading to formation of particles in precursor sol. In addition, the arrangement of octyl groups is used for explanation of particles arrangement on film surface.

Open image in new window

     

Temporal variation of tritium concentration in tree-ring cellulose

Tritium concentration of organically bound hydrogen has been measured during the 1941 to 1987 period using a cellulose fraction extracted from pine tree grown in Tatsunokuchi-machi, Ishikawa Prefecture, Japan. It was concluded that most of the tritium bound in cellulose was supplied from the mixture of underground water in the root zone of the pine tree. Underground water was strongly influenced by the precipitation and waters with different residence times. This revised version was published online in July 2006 with corrections to the Cover Date.     

Relation between total energy,electronic potential at the nucleus,and chemical potential of positive ions

Simple density functional theory gives the following relation between the energy E_{Z, N} of an ion of nuclear charge Z and N electrons, the potential V(0) created at the nucleus by the electronic cloud, and the chemical potential μ Using Hartree—Fock values for V(0) and μ, this equation has been tested in several isoelectronic series with 3 ≤ N ≤ 28. The importance of the term 3Nμ/7 increases as the degree of ionization increases.     

Relation between chemical structure of amino acids and their thermal decomposition

The influence of substituents on the thermal decomposition of monomeric organic compounds was studied. For this purpose the thermal destruction of dozen or so α-amino acids of the diversified chemical constitution, among others compounds containing the second amine group, additional carboxyl group, amino acids containing hydroxyl or sulfhydryl groups and amino acids connected with five-member heterocyclic ring or existing in the form of hydrates or hydrochlorides were investigated. The analyses were performed using a derivatograph in an air atmosphere, sample sizes were from 50 to 200 mg and heating rate from 3 to 15 K min^-1. It has been established that the thermal decomposition of studied compounds occurs in three stages. The temperature ranges, in which the analyzed compounds undergo thermal transformations were established. For evaluation of the thermoanalytical results an advanced multivariate data processing method, principal component analysis (PCA), was used. By this method the influence of the specific functional groups on the thermal decomposition of α-amino acids was determined. The stage of decomposition, in which the thermoanalytic data are the best correlated to the chemical constitution of the compound, is the second stage. It has also been recognized, that better discrimination among the analyzed compounds was obtained for the data set of the DTA.     

Relation between forest fuels composition and energy emitted during their thermal degradation

In this work, calorimetric experiments were performed in order to study the thermal oxidative degradation of rockrose, heather, strawberry tree and pine. Firstly, lignin, holocellulose and cellulose were extracted from the fuels and their contents were calculated according to normalized chemical methods. Then, Differential Scanning Calorimetry was used under air sweeping with dynamic mode on the temperature range [400–900 K] in order to obtain reaction enthalpy. Finally, a simple enthalpy model was developed based on the enthalpy of the thermal degradation of each biopolymer with their respective proportions in the fuels. The results showed that the model agreed satisfactorily to experimental data.     

Levels of tritium concentration in the environmental samples around JAERI TOKAI

By the operation of research reactors, tritium-handling facilities, nuclear power plants, and a reprocessing facility around JAERI TOKAI, tritium is released into the environment in compliance with the regulatory standards.To investigate the levels of tritium concentration in environmental samples around JAERI, rain, air (vapor and hydrogen gas), and tissue-free water of pine needles were measured and analyzed from 1984 to 1993. Sampling locations were determined by taking into consideration wind direction, distance from nuclear facilities, and population distribution. The NAKA site (about 6 km west-northwest from the TOKAI site) was also selected as a reference point.Rain and tissue-free water of pine needles were sampled monthly. For air samples, sampling was carried out for two weeks by using the continuous tritium sampler. After the pretreatment of samples, tritium concentrations were measured by a low background liquid scintillation counter (detection limit is 0.8 Bq/l).Annual mean tritium concentrations in rain observed at six points for 10 years was 0.8 to 8.9 Bq/l, which decreased with distance from the nuclear facilities. Tritium concentrations in rain obtained at Chiba City were around 0.8 Bq/l (1987–1988) and those at the NAKA site were 0.8 to 3.8 Bq/l.Annual mean HTO concentrations in air at three points for 10 years were 9.2×10^–2 to 1.1 Bq/m³, although HT concentrations in air, ranging from 1.7×10^–2 to 5.8×10^–2 Bq/m³, were not influenced by the operation of the nuclear facilities.Annual mean tritium concentrations in tissue-free water of pine needles at four points for 10 years were 1.4 to 31 Bq/l. Those at the NAKA site ranging from 1.4 to 6.2 Bq/l were in good agreement with the reported value by Takashima of 0.78 to 3.0 Bq/l at twenty-one locations in Japan.Monthly mean HTO concentrations in air for 10 years showed a good correlation with absolute humidity, while other samples showed no seasonal variation.Higher level tritium concentrations in rain, in air (vapor), and in tissue-free water of pine needles at the TOKAI site were caused by the tritium released from the nuclear facilities.The committed effective dose equivalent to the member of general public, estimated using the maximum tritium concentration in air (1.1 Bq/m³), was 0.23 Sv, which was about 1/4000 of dose limit for general public.     

Uncertainty estimation in chemical measurements: carbon dioxide determination at atmospheric concentration

The present work deals with the evaluation of measurement uncertainty in the determination of carbon dioxide (CO2) concentration in atmosphere, given the high relevance of this greenhouse gas that influences earth climate. In order to carry out CO2 measurements, non dispersive infrared (NDIR) analysers are usually employed as they are stable and scarcely affected by interferences from other air components or pollutants. Typical uncertainty sources are the resolution of the analyser, its time drift and the contributions due to instrument calibration, which is required in order to produce traceable measurement results. The calibration uncertainty takes into account the uncertainty of the composition of the calibration gas mixtures, the instrument repeatability and the possible or residual lack of fit of the adopted mathematical model.     

Correlations between chemical composition and provenance of Justino site ceramics by INAA

Instrumental neutron activation analysis (INAA), have been used for the definition of compositional groups of potteries from Justino site, Brazil, according to the chemical similarities of ceramic paste. The outliers were identified by means of robust Mahalanobis distance. The temper effect in the ceramic paste was studied by means of modified Mahalanobis filter. The results were interpreted by means of cluster, principal components, and discriminant analyses. This work provides contributions for the reconstruction of the prehistory of baixo São Francisco region, and for the reconstitution of the Brazilian Northeast ceramist population of general frame.     

A topography/chemical composition gradient polystyrene surface: toward the investigation of the relationship between surface wettability and surface structure and chemical composition

In this paper, we have prepared of a topography/chemical composition gradient polystyrene (PS) surface, i.e., an orthogonal gradient surface, to investigate the relationship between surface wettability and surface structure and chemical composition. The prepared surface shows a one-dimensional gradient in wettability in the x, y, and diagonal directions, including hydrophobic to hydrophilic, superhydrophobic to hydrophobic, superhydrophobic to superhydrophilic gradients, and so forth. These one-dimensional gradients have different gradient values, gradient range, and contact angle hysteresis, which lie on both the surface roughness and the surface compositions. From the trend of variation of contact angle hysteresis, it can be concluded that the transition from the Cassie's model to the Wenzel's model occurs both by decreasing surface roughness and by increasing surface hydrophilic compositions. Moreover, the transition is more effective via changing surface chemical composition than changing surface roughness herein.     

Relation between time of gelation and concentration of silicic acid,iron and chromium silicates

Summary Gelation of the product obtained in the metathesis of chlorides of iron and chromium with sodium silicate is highly sensitive to p_H changes. The time of set increases with the decreasing amount of geling material and has been found to obey the following equation at the same p_H 1/t=Ae ^BC . The equation is also applicable for the gels of different amount of silica obtained by the interaction of sodium silicate and an acid at the same p_H.

---

Zusammenfassung Die Gelatinierung des Reaktionsproduktes von Eisen und Chromchlorid mit Natriumsilikat ist au?erordentlich p_H-empfindlich. Die Erstarrungszeit w?chst mit abnehmenden Betr?gen an gelierendem Material und gehorcht bei gleichem p_H der Gleichung 1/t= A· exp (BC). Die Gleichung ist auch für Gele von verschiedenem Silikatgehalt anwendbar, die bei Wechselwirkung von Natriumsilikat und einer S?ure vom gleichen p_H entstehen.

     

Temporal variation of tritium concentration in tree-ring cellulose over the past 50 years

Concentration of organically-bound tritium in the tree-ring cellulose of a pine tree grown in Shika-machi, Ishikawa prefecture, Japan (37.1°N, 136.5°E), was measured during the ring-years from 1949 to 1999. The results were compared with those of a pine tree grown in Tatsunokuchi-machi, Ishikawa prefecture, Japan (36.4°N, 136.5° E). The annual variation of tritium in tree rings demonstrated two differences between the Shika-machi tree and the Tatsunokuchi-machi tree. No secondary peak appeared in the period after the maximum peak of 1963 for the Shika-machi tree, while two peaks appeared in 1966 and 1970 for the Tatsunokuchi-machi tree. In addition, the height of the 1963 peak was 30% higher for the Shika-machi tree than for the Tatsunokuchi-machi tree. These differences are considered to be caused by the influence that the underground water in the root zone of the Tatsunokuchi-machi tree was strongly affected by water which was transported to the tree site from mountain regions as compared to the Shika-machi tree.This study was supported in part by a Grant from the Ishikawa Prefectural Institute of Public Health and Environmental Science.     

Temporal variation of tritium concentration in tree-ring cellulose over the past 50 years

Concentration of organically-bound tritium in the tree-ring cellulose of a pine tree grown in Shika-machi, Ishikawa prefecture, Japan (37.1°N, 136.5°E), was measured during the ring-years from 1949 to 1999. The results were compared with those of a pine tree grown in Tatsunokuchi-machi, Ishikawa prefecture, Japan (36.4°N, 136.5° E). The annual variation of tritium in tree rings demonstrated two differences between the Shika-machi tree and the Tatsunokuchi-machi tree. No secondary peak appeared in the period after the maximum peak of 1963 for the Shika-machi tree, while two peaks appeared in 1966 and 1970 for the Tatsunokuchi-machi tree. In addition, the height of the 1963 peak was 30% higher for the Shika-machi tree than for the Tatsunokuchi-machi tree. These differences are considered to be caused by the influence that the underground water in the root zone of the Tatsunokuchi-machi tree was strongly affected by water which was transported to the tree site from mountain regions as compared to the Shika-machi tree.This study was supported in part by a Grant from the Ishikawa Prefectural Institute of Public Health and Environmental Science.     

Determination of elemental composition of airborne dust and dust suspended in rain

To clarify the magnitude of wash-out effect of rain on the elemental composition of airborne dust and the possible origin of the dust, the dust samples were collected with a high-volume air sampler at the JAERI-Tokai. The dust suspended in rain was also collected from rain by filtration. Up to 20 elements in both types of the dust were determined by instrumental neutron activation analysis. It was found that the elements determined could be classified into 3 groups from the elemental composition and the elemental correlation in both types of the dust samples.     

Relation between chemical bonding and exchange coupling approaches to the description of ordering in itinerant magnets

Two different approaches to explain and predict the types of magnetic ordering in the 3d metal series and their compounds are reviewed. According to the crossing theorem of Heine and Samson, the effective exchange coupling changes sign from negative (antiferromagnetic ordering) in the middle of 3d band to positive (ferromagnetic ordering) for the nearly empty or nearly filled d band cases. On the other hand, the analytical properties of the Crystal Orbital Hamilton Population, which is a measure of chemical bonding, predict only one crossing at the center of the band in the region of nonbonding states. Thus intermetallic compounds with Fermi energies falling within metal-metal nonbonding states are ordered antiferromagnetically whereas they order ferromagnetically when the Fermi levels fall within antibonding states. The general character of these dependencies is demonstrated for various examples containing the magnetically active 3d metals, examples that include the bcc metals, Heusler alloys, and a series of novel quaternary intermetallic borides.     

Enhanced indoor radon concentration by using radon-rich well water in a Japanese wooden house in Fukuoka, Japan

Summary Radon measurements were carried out in a Japanese wooden house built on granitic geology, where radon-rich well water is used. Atmospheric radon concentrations were measured over one year with passive integrated radon monitors. The monitors were distributed at several locations in the house and were replaced every two months. In order to confirm the diurnal variation and heterogeneous distribution of radon, short-term measurements were carried out accordingly. Radon, its decay products and terrestrial gamma-radiations were measured in this survey. From the long-term measurement, the radon concentration in the house ranged from 14 to 184 Bq^. m^-3with an arithmetic mean of 45 Bq^. m^-3. A radon concentration of 184 Bq^. m^-3was observed in the bathroom in spring (March-May) though the radon level was normal in the living room and bedroom. In order to characterize the house, similar measurements were conducted in several surrounding houses. There was a significant difference in radon concentration between the investigated houses. There was a spatial distribution of the radon concentration and the highest value was found in the bathroom. Radon and its decay products concentrations varied with time, which increased from midnight to morning whereas they decreased during daytime. Although the radon concentration in tap water was 1 Bq^. l^-1, a high level of 353 Bq^. l^-1was found in the well water.While well water was being used, the indoor radon concentration near the bathroom increased rapidly with a maximum value of 964 Bq^. m^-3. It is clear that the use of well water enhanced the radon level around the bathroom.