Functionalized Polymeric Sorbents for Solid-Phase Extraction of Polar Pollutants

This study assesses how the physical characteristics of styrene-divinylbenzene (PS-DVB) resins affect the extent to which they are modified when they are functionalized, and how they affect recoveries in on-line solid-phase extraction (SPE) of some polar phenolic compounds, pesticides, and metabolites from water samples which were analyzed by liquid chromatography and UV detection. For this purpose, three commercial PS-DVB resins with different physical characteristics (Amberchrom GC-161m and two different PLRP-S resins) were chemically modified by placing a hydrophilic group, an o-carboxybenzoyl moiety, on their surface; although the physical characteristics are different, the extent of modification did not vary significantly. The results from the SPE process with each sorbent were related to their physical and chemical properties. The polymers with higher surface area provided better recoveries. Moreover, the recoveries for these analytes were better with the chemically-modified polymers due to the higher polarity of these sorbents. The best recovery values were with the sorbent obtained from the chemical modification of Amberchrom GC-161m, the commercial sorbent with higher surface area. For instance, in the analysis of 50 mL of a sample of 2 μg L^–1, the recovery of phenol was 40% with Amberchrom GC-161m and 65% with the chemically-modified Amberchrom GC-161m.     

Comparison of Different Sorbents for Solid-Phase Extraction of Phenoxyalkanoic Acid Herbicides

An HPLC procedure for determination of phenoxyalkanoic acid herbicides in water samples is proposed. The analytical column Phenomenex C18(2) Luna 5 µm and UV detection at 225 nm were applied. Baseline resolution was achieved in isocratic mode with a mobile phase consisting of acetonitrile/acetic acid (40/60, v/v), adjusted to pH 2.5. SPE sorbents – C₁₈ BondElut, phenyl-silica, LiChrolut SAX and polymeric sorbents – were compared for isolation and preconcentration of 6 phenoxyalkanoic acid herbicides. Higher (above 95%) and more reproducible recoveries were obtained with polymeric and phenyl-silica sorbents using pure methanol for elution. The method was tested for river water samples with the limit of detection in the range of 2–3 µg L⁻¹ (for 50 mL sample) and a reproducibility of 5% RSD.     

A Comparison of Solid-Phase Extraction Techniques for Assay of Drugs in Aqueous and Human Plasma Samples

Abstract

Six commercially available solid adsorbent materials were evaluated for their applicability as effective tools for extraction of drugs from aqueous and human plasma samples. Ten model compounds were selected as representative of the acidic, basic, amphoteric, hydrophobic, and hydrophilic drug classes. Percent recovery and precision data for each model drug on each solid adsorbent material were calculated using spiked water and/or plasma samples. Octadecylsilane materials were the best overall choice for extraction of the different chemical classes of drugs from water and plasma samples, giving both highest recovery and best reproducibility data for a majority of the drugs studied. It was also determined that good extractability for basic drugs could be obtained using either XAD-2, Clin-eht® or cyanopropyl columns. In addition, XAD-2 gave good recoveries of amphoteric compounds and Clin-elut® was good for hydrophobic drugs.     

Synthesis and Sorption Performance of Novel Sorbents for Selective Solid-Phase Extraction of Eu(III) Ions from Aqueous Solutions

Russian Journal of Applied Chemistry - Magnesium-cadmium hydroxyapatite [(Mg-Cd)HAP] and novel multi-wall carbon nanotubes Mg-Cd hydroxyapatite (CNTs/(Mg-Cd)HAP) composites were synthesized by a...     

Solid-Phase Extraction of Polycyclic Aromatic Hydrocarbons Using Polymer Sorbents

Adsorption properties of polymer sorbents of the Styrosorb type in the preconcentration of polycyclic aromatic hydrocarbons from aqueous solutions were studied. Optimal conditions of extraction were determined. It was found that naphthalene and phenanthrene are most efficiently extracted with these sorbents.     

Composite Nanofibers as Novel Sorbents for On-Line and Off-Line Solid-Phase Extraction in Chromatographic System: A Comparison for Detection of Free Biogenic Monoamines and Their Metabolites in Plasma

Two different pretreatment approaches have been used for the enrichment and separation of biogenic monoamines and metabolites in plasma for high performance liquid chromatography (HPLC) determination. The first approach, based on on-line packed-fiber solid-phase extraction (PFSPE) coupled with HPLC, allows for the simultaneous detection of epinephrine (E), norepinephrine (NE), dopamine (DA), 3-methoxyl epinephrine (MN), norepinephrine (NMN), 3-methoxytyramine (3-MT), and 5-hydroxytryptamin (5-HT). Using this developed on-line PFSPE–HPLC method, the limit of detections (LODs) of the seven analytes ranged from 1 ng/mL (NMN and MN) to 2 ng/mL (NE, E, DA, 3-MT and 5-HT). The reportable ranges were 5–300 ng/mL for NE and DA, 5–100 ng/mL for E, and 5–200 ng/mL for NMN, MN, 3-MT and 5-HT. The off-line PFSPE–HPLC was employed in the second approach and could provide simultaneous detection of NE, E, DA, NMN, and MN. The linearity was verified in the range of 0.5–20 ng/mL (NE, E, and DA) and 20–250 ng/mL (NMN and MN). The LODs of the five analytes ranged from 0.2 ng/mL (NE, E, and DA) to 5 ng/mL (NMN and MN). This study verified the possibility of using nanofibers as an adsorbent in an on-line PFSPE–HPLC system for the determination of biogenic monoamines and their metabolites in human plasma. Compared with the off-line PFSPE approach, the on-line PFSPE method deserves attention mainly due to its greener character, derived from the automation of the process and high-throughput with less operators’ handling.     

Polymeric Sorbents for Bile Acids. III. Hydrophilic and Hydrophobic Models 0f Cholestyramine

Abstract

A study is presented of the binding of glycocholate bile salt anions by crosslinked polymeric beads consisting of either an acrylamide or a Merrifield resin. Various amine-containing pendant groups have been synthesized onto the functional sites of the backbones of these resins, thus forming bile acid sorbents. Based on the effects of systematic changes in the structure of the functional groups on the sorption isotherms, it is shown that the extent of binding is favored by changes that increase the basicity, especially quaternization. On the other hand, sorption is inhibited by extensive crosslinking. It is concluded that the sorption of glycocholate by these sorbents involves an ion-exchange mechanism.     

Transformation Studies of Some Polar Pesticides In Water By On-Line Solid-Phase Extraction and Liquid Chromatography/Particle Beam-Mass Spectrometry

ABSTRACT

An on-line automated method for phototransformation studies of alachlor, aldicarb, and methiocarb by means of liquid chromatography/mass spectrometry (LC/MS) with particle beam (PB) interface is described. Surface water samples were first spiked with 50 μg/1 of each pesticide and then exposed to the radiation of a medium-pressure mercury lamp. Next, in regular intervals of 60 min, aliquots of 50-ml sample were enriched on a solid-phase extraction (SPE) cartridge and on-line eluted by a gradient of LC eluent onto analytical column for separation, followed by MS detection. A phototransformation experiment with each pesticide was performed twice, with MS operated in electron ionisation (EI) and positive chemical ionisation (PCI) modes. Many transformation products (TPs) of parent pesticides were detected and in numerous instances, tentatively identified. Appearance of several transformation products is reported for the first time.     

在线富集-HPLC法测定水溶液中多环芳烃

本文采用在线富集-HPLC 法测定水溶液中多环芳烃。先使样品中的组分浓缩在一支短的富集柱上,然后切换阀门,将富集物洗脱到 RPHPLC 的体系中进行分离,并用紫外和荧光检定器对冼脱物进行检测。为了提高检测灵敏度和选择性,实验中采用了荧光波长程序技术。考察了富集的最佳条件,并比较了在线法与离线法的测定结果。     

Study of Phenolic Compounds Removal from Aqueous Solution by Polymeric Sorbent

This study describes preparation of polymeric sorbent and its use in removal of some phenolic compounds from aqueous solution. The polymer [poly(ethylene glycol dimethacrylate ‐ co‐methacrylic acid)] is stable both thermally and chemically. High temperature (200°C) and strong acidic or alkaline solutions (4 M HCl or NaOH) are not effective on the adsorption characteristics of polymer. Removal process of phenols is pH‐dependent and from the obtained results pH = 7.0 was selected as an optimum pH. Different parameters affecting sorption process were tested, and it was found that the kinetic of sorption is fast; therefore, column experiment at higher flow rates or batch experiment can be used. Methanol was selected as a washing solvent in column experiments. Capacity of sorbent for the studied compounds was tested and the following order was obtained: p‐chlorophenol > p‐aminophenol > phenol.     

强极性中药组分的亲水作用色谱保留行为

采用亲水作用色谱模式,以二醇基硅胶为固定相,水-有机溶剂为流动相,通过改变流动相中有机溶剂种类及浓度、缓冲盐、有机酸种类及其浓度、柱温等条件,研究了强极性中药组分在亲水作用色谱中的保留行为。结果表明:流动相中水的比例在0～100%(V/V)变化时,溶质保留呈U型曲线,属于亲水色谱和反相色谱的混合保留机理。水含量在0～50%(V/V)范围时,亲水作用控制溶质的保留。溶质保留随流动相中缓冲盐浓度的增大而增强。对于酸性溶质,其保留随有机酸三氟乙酸、甲酸、乙酸的酸性降低而增大。     

Solid-Phase Extraction Techniques for Assay of Diuretics in Human Urine Samples

Abstract

Solid-phase extraction techniques were evaluated for the treatment of urine samples in the analysis of diuretics before injection into an HP-Hypersyl ODS-C18 column. Six different reversed-phase extraction columns were tested, and the results obtained are compared with those obtained in a classical liquid-liquid extraction with ethyl acetate.

The solid-phase extraction procedures are the best overall choice for all the diuretics tested, due to their versatility, the minor time-consuming, and the good recovery percentages obtained. C18 and C8 packings give the highest recoveries for a majority of the diuretics studied. However, CH or PH columns, due to their greater selectivity, can be used if the elution of the matrix is not complete in the washing solution. This could be more suitable.     

Comparison of Extraction Techniques for the Determination of Volatile Organic Compounds in Liverwort Samples

This article focuses on the comparison of four popular techniques for the extraction of volatile organic compounds (VOCs) from liverworts of the Calypogeia azurea species. Since extraction is the most important step in the sample analysis of ingredients present in botanical preparations, their strengths, and weaknesses are discussed. In order to determine the VOCs present in plants, selecting the appropriate one is a key step of the extraction technique. Extraction should ensure the isolation of all components present in the oily bodies of Calypogeia azurea without the formation of any artifacts during treatment. The best extraction method should yield the determined compounds in detectable amounts. Hydrodistillation (HD), applying Deryng apparatus and solid-liquid extraction (SLE), microwave-assisted extraction (MAE), and headspace solid-phase microextraction (HS-SPME) were used for volatile extraction. The extracts obtained were analysed by gas chromatography coupled to mass spectrometry (GC-MS) to determine the compounds.     

Modified Polypyrrole with Tetrasulfonated Nickel Phthalocyanine as a Fiber for Solid-Phase Microextraction. Application to the Extraction of BTEX Compounds from Water Samples

Gold wire was coated with polypyrrole (PPY) by electropolymerization and used as a solid-phase microextraction (SPME) fiber. The adsorptive property of the coating was modified by doping with tetrasulfonated nickel phthalocyanine (NiPcTS). The efficiency and reliability of this fiber was investigated for the extraction of BTEX compounds from the headspace of water samples. Monitoring of extraction efficiency was performed by capillary GC-FID. Effects of several factors such as electropolymerization time, salt addition, exposure time and stirring speed on extraction efficiency were studied. The calibration graphs were linear in the range of 0.06 to 50 ng mL^?1 and the detection limits for BTEX compounds were 20–50 pg mL^?1. Comparing the results obtained using these fibers with results reported in the literature with polydimethylsiloxane (PDMS) fibers shows that under optimum conditions, the detection limits are comparable.     

OPLC Comparison of Methods for Aqueous Extraction of Sennae folium and Tiliae flos Plant Samples

JPC – Journal of Planar Chromatography – Modern TLC - A new, simplified open-vessel microwave extraction (OVME) method has been used to prepare aqueous extracts of Sennae folium and...     

Solid-Phase Extraction of Aliphatic Amines from the Aqueous Phase with a Methacrylate Polymer

Solid-phase extraction of aliphatic amines from aqueous solutions with a methacrylate polymer was studied. The possibility of simultaneous sorption of amines considerably differing in the boiling point was examined.     

Antibacterial Activity of Polymeric Quaternary Ammonium Compounds Tuned by Incorporating Hydrophilic co-Monomer

Copolymers of quaternary ammonium monomer(QAM) and hydrophilic co-monomer were successfully synthesized by free radical polymerization. It was discovered that the hydrophilic co-monomers with poor antibacterial activity significantly enhanced the activity of QAM substituted with a long alkyl chain[i.e., N,N-dimethyl-N-dodecyl methacrylate ammonium bromide(DMAEMA-DB)]. When a suitable molar ratio of DMAEMA-DB to co-monomer was selected, the activity of the copolymers was up to 123 times that of the homopolymer of DMAEMA-DB against S. aureus, and 282 times that of it against E. coli. But unlike DMAEMA-DB, the co-monomers might weaken the activity of QAM substituted with a short alkyl chain[i.e., N,N-dimethyl-N-butyl methacrylate ammonium bromide(DMAEMA-BB)]. Moreover, it was found that copolymers of DMAEMA-DB were much more biocidal than those of DMAEMA-BB. Therefore, it could be speculated that the long alkyl chain plays an important role in the antibacterial activity, and that the hydrophilic co-monomers are beneficial to polymeric guaternary ammonium compounds(PQACs) to exert the positive effect of the long alkyl chain to the greatest degree.