Microwave-Assisted Synthesis of P-Heterocycles*

Abstract

The direct esterification, thioesterification and amidation of cyclic phosphinic acids, such as 1-hydroxy-3-phospholene 1-oxides, 1-hydroxy-phospholane 1-oxides and a 1-hydroxy-1,2,3,4,5,6-hexahydrophosphinine 1-oxide, which do not take place on conventional heating, were carried out under MW conditions in excess of the alcohol, thioalcohol and amine, respectively. The cyclic phosphinates were also prepared by MW-assisted alkylating esterification of the corresponding phosphinic acids in solid–liquid phase. Using alkyl halides of normal reactivity, the application of a phase transfer catalyst was also beneficial. In addition, MW-assisted Diels–Alder reactions, so-called inverse Wittig-type reactions furnishing β-oxophosphoranes, a few kinds of phospha-Michael additions leading to precursors of bidentate P-ligands, and a few Kabachnik–Fields condensations affording α-aminophosphonates and α-aminophosphine oxides are discussed.     

Early Physical Organic Chemistry: Nikolai Aleksandrovich Menshutkin (1842–1907) and Reaction Velocities

The name of Menshutkin is most frequently associated with his eponymous reaction (the quaternization of tertiary amines with alkyl halides). However, he made encyclopedic contributions to the field of reaction kinetics, where he carried out extensive studies of the effects of reactant structure on the rates of esterification of monohydric, dihydric and trihydric alcohols with monocarboxylic acids, and monobasic and dibasic carboxylic acids and anhydrides with monohydric alcohols. In these studies, he deduced an order of reactivity of alcohols in esterification on the basis of their reactions with acetic acid, and the effects of acid structure on the rates of esterification based on the reaction of the carboxylic acid with isobutyl alcohol. When his attention later turned to the substitution chemistry of amines, he defined the parameters that affected their reactions: anilines were less reactive than alkylamines, secondary more reactive than primary amines, and the reaction was accelerated by replacing benzene as a solvent with alcohols. The wide-ranging work of Menshutkin, the physical organic chemist, is discussed.     

Heterogeneous modification of various celluloses with fatty acids

Heterogeneous modification of various types of cellulose (microcrystalline cellulose, cellulose whiskers and regenerated cellulose) was performed with long-chain fatty acids by an esterification reaction. The differences in reactivity between the celluloses were studied as well as the influences of the chain length and double bond content of the fatty acids. The success of the modification reaction and the structure of modified samples were studied with diverse characterization methods. Surface modification changed the thermal stability of cellulose by decreasing the degradation temperature but also made the pyrolysis curve two-stepped due to the double bonds in the fatty acid chain. It was observed that the nature of the fatty acid affected the degree of substitution (DS). The longer the fatty acid chain was, the lower was the DS. Fatty acids with increased double bond content gave decreased DS. Regenerated cellulose seemed to have the highest surface reactivity due to the distinct morphological structure, which also led to a much lower quantity of fatty acids attached to the structure than for other modified cellulose particles. The mixture of tall oil fatty acids behaved in the same manner as the commercial fatty acids, proving to be an excellent “green” choice for this kind of application.     

Trace analysis of surfactants derived from fatty alcohols II. Hydrolysis and enrichment techniques

Summary Acid catalyzed hydrolysis of fatty alcohol sulfates under reflux condition or by microwave heating is compared. Microwave hydrolysis turned out to be faster and more convenient to use. The combination of reflux hydrolysis of fatty alcohol sulfates or alkyl polyglycosides and the simultaneous steam distillation of the generated fatty alcohols gives a very powerful sample preparation and enrichment method for fatty alcohol sulfates and alkyl polyglycosides. The preconcentrated fatty alcohols are derivatized and detected via fluorescence detection. The applicability of the method is demonstrated by the analysis of fatty alcohol sulfates in cosmetics and in river water as matrices spiked with approximately 4 ppb fatty alcohol sulfates.     

Bio‐based comb‐like copolymers derived from alkyl 10‐undecenoates and maleic anhydride

In this article, 10‐undecenoic acid, based on castor oil, was used a raw material for the synthesis of alternating copolymers. ω‐Unsaturated fatty esters as alkyl 10‐undecenoates were prepared by the esterification reaction of 10‐undecenoic acid with alkyl alcohol. A series of comb‐like copolymers were synthesized by free radical polymerization from maleic anhydride and alkyl 10‐undecenoates copolymers with different length of alkyl side chains in a toluene solution. These copolymers were investigated by ¹H and ¹³C nuclear magnetic resonance, Fourier transform infrared spectroscopy, gel permeation chromatography, thermogravimetric analysis, differential scanning calorimetry (DSC). The copolymers were obtained in a low molecular weight in a range 3370–12,240 g mol⁻¹ and their structural characterization indicated the formation of alternating copolymers. DSC characterization revealed that these comb‐like copolymers showed amorphous to semicrystalline behavior by increasing the length of side chains. The bio‐based comb‐like copolymers allow for the development of new polymeric materials for several applications. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1039–1045     

Dendronized cyclocopolymers with a radial gradient of polarity and their use to catalyze a difficult esterification

A cyclocopolymer containing pyrrolidinopyridine pendant groups was dendronized with polyester dendrons terminated with long alkyl chain ends and the microenvironment created by the dendrons was used to catalyze the difficult esterification of a tertiary alcohol with pivalic anhydride.     

Highly Efficient Direct Aerobic Oxidative Esterification of Cinnamyl Alcohol with Alkyl Alcohols Catalysed by Gold Nanoparticles Incarcerated in a Nanoporous Polymer Matrix: A Tool for Investigating the Role of the Polymer Host

The selective aerobic oxidation of cinnamyl alcohol to cinnamaldehyde, as well as direct oxidative esterification of this alcohol with primary and secondary aliphatic alcohols, were achieved with high chemoselectivity by using gold nanoparticles supported in a nanoporous semicrystalline multi‐block copolymer matrix, which consisted of syndiotactic polystyrene‐co‐cis‐1,4‐polybutadiene. The cascade reaction that leads to the alkyl cinnamates occurs through two oxidation steps: the selective oxidation of cinnamyl alcohol to cinnamaldehyde, followed by oxidation of the hemiacetal that results from the base‐catalysed reaction of cinnamaldehyde with an aliphatic alcohol. The rate constants for the two steps were evaluated in the temperature range 10–45 °C. The cinnamyl alcohol oxidation is faster than the oxidative esterification of cinnamaldehyde with methanol, ethanol, 2‐propanol, 1‐butanol, 1‐hexanol or 1‐octanol. The rate constants of the latter reaction are pseudo‐zero order with respect to the aliphatic alcohol and decrease as the bulkiness of the alcohol is increased. The activation energy (E_a) for the two oxidation steps was calculated for esterification of cinnamyl alcohol with 1‐butanol (E_a=57.8±11.5 and 62.7±16.7 kJ mol^?1 for the first and second step, respectively). The oxidative esterification of cinnamyl alcohol with 2‐phenylethanol follows pseudo‐first‐order kinetics with respect to 2‐phenylethanol and is faster than observed for other alcohols because of fast diffusion of the aromatic alcohol in the crystalline phase of the support. The kinetic investigation allowed us to assess the role of the polymer support in the determination of both high activity and selectivity in the title reaction.     

Biodiesel Production from Vegetable Oils and Animal Fat over Solid Acid Double-Metal Cyanide Catalysts

Biodiesel comprises of fatty acid alkyl esters prepared from vegetable oils or animal fat by esterification/transesterification with short-chain alcohols (methanol or ethanol, for example). It is a biodegradable renewable fuel. Its production is growing exponentially due to greater concerns about environmental protection and depletion of fossil fuel resources. Further, its production from non-edible oils and animal fat is more desirable than from edible oils due to lower cost of non-edible feedstocks and elimination of food verses fuel issues. Solid acid catalysts are ideal for conversion of such low-grade oils to biodiesel. Biodiesel from non-edible oils can be produced by two methods: (1) simultaneous esterification of fatty acids and transesterification of fatty acid glycerides and (2) hydrolysis of glycerides followed by esterification. This account reports the catalytic performance of solid, Fe–Zn double-metal cyanide (DMC) complexes and other acid catalysts in these transformations for biodiesel production. The factors influencing the catalytic performance of the solid acid catalysts in biodiesel production are discussed.     

功能化离子液体室温催化合成乙酸苄酯

制备了N-甲基-N′-磺酸烷基-咪唑阴离子型功能化室温离子液体,研究了功能化室温离子液体(TSILs)于室温下催化乙酸和苯甲醇反应合成乙酸苄酯的新方法,考察了多种TSILs的催化性能。结果表明,所合成的TSILs具有很高的催化活性,乙酸和苯甲醇的摩尔比为1:1．3,在室温下反应2．5 h,乙酸苄酯的产率可达92％,选择性超过99％。由于生成的乙酸苄酯不溶于催化体系,反应产物与催化体系分层,通过简单的倾析便可实现产物分离,简化了分离过程。离子液体可以循环使用,而其催化活性没有明显降低。     

Vicarious nucleophilic substitution in enamine derivatives of 1-hydroxynaphthalene-2,4-dicarbaldehyde

The reaction of aromatic amines with highly stable Schiff base enamines formed from an alkyl amine and 1-hydroxynaphthalene-2,4-dicarbaldehyde resulted in nucleophilic substitution of the alkyl amine with the aromatic amine in ethyl alcohol at room temperature within 1-2 min. This reactivity, regioselectivity and formation of stable derivatives are due to extra stabilization through extended conjugation in these systems.     

两亲性D-π-A型有机染料在染料敏化太阳能电池中的应用

设计合成了6个带有烷基链的D-π-A型有机光敏染料应用于染料敏化太阳能电池. 发现长链烷基有利于电池开路光电压的提高. 利用脂肪酸共敏化可进一步提高染料分子的敏化效果, 且提高的程度与脂肪酸的链长有重要关系.     

脂肪醇聚醚产品及脂肪醇羟值的快速测定

以4-二甲氨基吡啶为催化剂,过量乙酸酐为乙酰化试剂,吡啶为溶剂,用电位滴定法快速测定脂肪醇聚醚产品及脂肪醇羟值,并对催化剂、反应条件、系统的适应性进行了探讨。用该方法对5种不同羟值的脂肪醇聚醚及脂肪醇样品进行了测定,测定结果的相对标准偏差小于0.5%(n=6),且测定结果与国标法测定结果相符合,相对误差在±1%之内。     

Novel enzymatic assay for determination of alkyl polyglycosides with short chain fatty alcohols

An enzymatic assay has been developed for the quantitative detection of alkyl polyglycosides after enzymatic hydrolysis with different carbohydrolases. A three-step enzymatic method was used for the quantification of alkyl polyglycosides. In the first step the enzymatic hydrolysis of alkyl polyglycosides was performed with different carbohydrolases, or an acid hydrolysis was used. The second step was quantification of free glucose with an enzyme electrode, which was covered with an immobilized glucose oxidase membrane; glucose was used as standard. The last step was the enzymatic quantification of fatty alcohols, which are the second substrate after enzymatic hydrolysis of alkyl polyglycosides. Surprisingly, the enzyme alcohol dehydrogenase ADH (E.C. 1.1.1.1) from bakers' yeast could efficiently oxidize a wide variety of aliphatic alcohols and had the highest catalytic specificity with short and medium fatty alcohol substrates, including octanol and decanol.     

Bi-acylation of cellulose: determining the relative reactivities of the acetyl and fatty-acyl moieties

The global reaction between acetic anhydride and a fatty acid yields, at equilibrium, an asymmetric acetic-aliphatic anhydride in a medium containing finally: acetic-fatty anhydride, acetic anhydride, fatty acid, acetic acid and fatty anhydride. No solvent or catalyst was used to evaluate the impact of the actual reactivity of the anhydrides. The competition between the formation of acetyl and fatty acyl ester functions was evaluated by determining the ratio of acetyl/fatty acyl groups grafted on solid cellulose. The influence of temperature, reaction time, and length of fatty chain on the total degree of substitution and on the ratio of acetyl/fatty acyl ester functions was investigated. For the first time, a correlation has been established between esterification and the length of the aliphatic chain of the fatty acid. Reactivity of the medium decreased with the number of carbons in the fatty acid, raised to the power 2.37.     

四烃基二锡氧烷在酯化反应中的催化作用

1,1,3,3－四烃基二锡氧烷Ⅰ是一类有机锡氧簇合物,它在固相和液相中[1,2]均为二聚梯形层状结构,在有机合成中表现出特殊的催化活性,与其它含Sn—O键非簇类化合物相比,催化活性和选择性均有大幅度提高．该类化合物是酯交换、酯化、官能团保护和脱保护等反应的优良催化剂［3]．本文合成了一系列四烃基二锡氧烷,并以乙酸与丁醇的酯化反应为例,研究其对该反应的催化作用．     

Dual behavior of alcohols in iodine-catalyzed esterification under solvent-free reaction conditions

The dual behavior phenomenon of alcohols in iodine-catalyzed esterification under solvent-free reaction conditions (SFRCs) is described; the governing factor is the stability of the carbonium ion generated from the alcohol; high concentration reaction conditions (HCRCs) or dilute solutions are much less suitable. In the case of benzylic alcohols, loss of optical activity was noted, whereas alkyl alcohols furnished a product with retention of stereochemistry.     

A Comparative Study of the Catalytic Activity of Sulfonic Acid Cation-Exchange Resins with a Macroporous and Gel Structure in Fatty Acid Esterification

Kinetics and Catalysis - The activity and stability of cation-exchange resins in fatty acid esterification with methyl alcohol have been studied. The cation-exchange resins have been characterized...     

含硅四烃基二锡氧烷的合成及其催化性能

含硅四烃基二锡氧烷;合成;催化;酯化反应;缩醛化反应     

Bioreversible derivatives of phenol. 2. Reactivity of carbonate esters with fatty acid-like structures towards hydrolysis in aqueous solutions

A series of model phenol carbonate ester prodrugs encompassing derivatives with fatty acid-like structures were synthesized and their stability as a function of pH (range 0.4 - 12.5) at 37 degrees C in aqueous buffer solutions investigated. The hydrolysis rates in aqueous solutions differed widely, depending on the selected pro-moieties (alkyl and aryl substituents). The observed reactivity differences could be rationalized by the inductive and steric properties of the substituent groups when taking into account that the mechanism of hydrolysis may change when the type of pro-moiety is altered, e.g. n-alkyl vs. t-butyl. Hydrolysis of the phenolic carbonate ester 2-(phenoxycarbonyloxy)-acetic acid was increased due to intramolecular catalysis, as compared to the derivatives synthesized from omega-hydroxy carboxylic acids with longer alkyl chains. The carbonate esters appear to be less reactive towards specific acid and base catalyzed hydrolysis than phenyl acetate. The results underline that it is unrealistic to expect that phenolic carbonate ester prodrugs can be utilized in ready to use aqueous formulations. The stability of the carbonate ester derivatives with fatty acid-like structures, expected to interact with the plasma protein human serum albumin, proved sufficient for further in vitro and in vivo evaluation of the potential of utilizing HSA binding in combination with the prodrug approach for optimization of drug pharmacokinetics.     

Analysis of tensides in complex samples with comprehensive two-dimensional gas chromatography coupled with time-of-flight mass spectrometry

Multidimensional gas-chromatographical analysis of various tensides of natural or synthetic origin in cosmetic products is demonstrated. Comprehensive two-dimensional gas chromatography coupled with time-of-flight mass spectrometry allows the qualitative and quantitative determination of alkyl polyglucosides (AG), fatty alcohol ethoxylates (FAEO), fatty alcohol sulfates (FAS), fatty alcohol ether sulfates (FAES) and cocamidopropyl betaines (CAPB) in shower gel and cleaning agents. The samples were aliquoted in two parts. The first part was silylated, diluted and analysed; then, in order to detect anionic tensides (FAES, FAS) too, the second aliquot was hydrolysed before being silylated for analysis. Because of their amphoteric character, the betaines can only be analysed by gas chromatography after thermal decomposition in the injector, which leads to the corresponding amidoamines among other products.