Volumetric, Ultrasonic and Transport Properties of Binary Liquid Mixtures Containing Dimethyl Formamide at 303.15 K

Excess volumes （v^E）, ultrasonic velocities （u）, isentropic compressibility （△Ks） and viscosities （η） for the binary mixtures of dimethyl formamide （DMF） with 1,2-dichlorobenzene, 1,3-dichlorobenzene, 1,2,4-trichlorobenzene, o-chlorotoluene, m-chlorotoluene, p-chlorotoluene, o-nitrotoluene and m-nitrotoluene at 303.15 K were studied. Excess volume data exhibit an inversion in sign for the mixtures of dimethyl formamide with 1,2- and 1,3-dichlorobenzenes and the property is completely positive over the entire composition range for the mixtures of dimethyl formamide with 1,2,4-trichlorobenzene, o-nitrotoluene and m-nitrotoluene. On the other hand, the quantity is negative for the mixtures of dimethyl formamide with chlorotoluenes. Isentropic compressibility （Ks） has been computed for the same systems from precise sound velocity and density data. Further, deviation of isentropic com- pressibility （△Ks） from ideal behavior was also calculated. AKs values are negative over the entire volume fraction range in all the binary mixtures. The experimental sound velocity data were analysed in terms of Free Length Theory （FLT） and Collision Factor Theory （CFT）. The viscosity data were analysed on the basis of corresponding state approach. The measured data were discussed on the basis of intermolecular interactions between unlike molecules.     

Liquid–Liquid Equilibrium of Water + 1-Butanol + Inorganic Salt Systems at 303.15, 313.15 and 323.15 K: Experiments and Correlation

Liquid–liquid equilibria (LLE) and tie-line data of systems containing 1-butanol, water and NaCl, Na₂SO₄, NH₄Cl or (NH₄)₂SO₄ were investigated at 303.15, 313.15 and 323.15 K and atmospheric pressure. The salt decreases mutual solubilities of these two solvents leading to a higher degree of phase separation at equilibrium. The effect is more pronounced at high salt concentration. Temperature in the studied range had a minor effect on LLE behavior of these mixtures. Experimental data were correlated using a modified extended UNIQUAC model. Satisfactory agreement between the calculated and measured mass fractions of the components was achieved.     

Densities and Refractive Indices of Binary Mixtures of Olive Oil + Alkanols at 298.15 K

Densities and refractive indices of mixing of olive oil with the alkanols: methanol, ethanol, 1-propanol, 2-propanol and 1-butanol, have been measured as a function of the composition at T = 298.15 K. Excess molar volumes, $ V_{\text{m}}^{\text{E}} $ , and deviation in refractive index, Δn _D, were calculated and correlated by a Redlich–Kister type function, to derive the coefficients and estimate the standard error. For mixtures of olive oil with alkanols, $ V_{\text{m}}^{\text{E}} $ is positive, except with ethanol and methanol where a sigmoidal variation is observed. Δn _D is positive over the entire range of mole fraction. The effect of chain length of the alkanols on the excess molar volumes and deviation in refractive index of the mixtures with olive oil are discussed.     

Volumetric Properties of l-Alanine and l-Serine in Aqueous N,N-Dimethylformamide Solutions at 298.15 K

The densities of l-alanine and l-serine in aqueous solutions of N,N-dimethylformamide (DMF) have been measured at 298.15 K with an Anton Paar Model 55 densimeter. Apparent molar volumes $ (V_{\phi } ) $ ( V ? ) , standard partial molar volumes $ (V_{\phi }^{0} ) $ ( V ? 0 ) , standard partial molar volumes of transfer $ (\Updelta_{\text{tr}} V_{\phi }^{0} ) $ ( Δ tr V ? 0 ) and hydration numbers have been determined for the amino acids. The $ \Updelta_{\text{tr}} V_{\phi }^{0} $ Δ tr V ? 0 values of l-serine are positive which suggest that hydrophilic–hydrophilic interactions between l-serine and DMF are predominant. The –CH₃ group of l-alanine has much more influence on the volumetric properties and the $ \Updelta_{\text{tr}} V_{\phi }^{0} $ Δ tr V ? 0 have smaller negative values. The results have been interpreted in terms of the cosphere overlap model.     

Viscometric studies of molecular interactions of nicotine in aqueous and aqueous ethanol at 298.15, 303.15 and 308.15 K

Precise densities and viscosities at 298.15, 303.15, and 308.15?K for solutions of nicotine in water and in 0.02?mmol aqueous ethyl alcohol were measured for limiting apparent molal volume and B-coefficients calculations, respectively. These data are rationalized to illustrate hydrophilic and hydrophobic interactions between various functional groups present in these solutions.     

Volumetric Properties of 1,3-Dioxolane + Toluene + o- or p-Xylene Ternary Mixtures at 25.00 °C and Atmospheric Pressure

Excess molar volumes, $ V_{123}^{\text{E}} $ V 123 E , of 1, 3-dioxolane (1) + toluene (2) + o- or p-xylene (3) ternary mixtures have been determined dilatometrically over the entire composition range at 298.15 K. For thermodynamic consistency the experimental values were fitted to Redlich–Kister Equation. The $ V_{123}^{\text{E}} $ V 123 E values of 1, 3-dioxolane (1) + toluene (2) + o- or p-xylene (3) ternary mixtures have been found to be negative over the whole composition range. It has been observed that $ V_{123}^{\text{E}} $ V 123 E values calculated by graph theory are of the same sign and magnitude with respect to their experimental values.     

Chemical Equilibrium for the Reacting System Acetic Acid–Ethanol–Ethyl Acetate–Water at 303.15 K, 313.15 K and 323.15 K

The chemical equilibrium (CE) for the quaternary reacting system ethanol–acetic acid–ethyl acetate–water was studied at 303.15, 313.15 and 323.15 K and atmospheric pressure. The CE compositions were determined by gas chromatography and nuclear magnetic resonance analytical methods. The thermodynamic constants of CE at 303.15, 313.15 and 323.15 K were calculated based on the obtained experimental data with the use of the NRTL model.     

Viscometric, Acoustical and Spectroscopic Investigation of β-Pinene with Benzene, Toluene, m-Xylene and Mesitylene at 303.15, 308.15 and 313.15 K and Atmospheric Pressure

The densities (ρ), viscosities (η), ultrasonic speeds (u) and spectroscopic data of binary mixtures of benzene, toluene, m-xylene and mesitylene with β-pinene as a common component, over the whole composition range of mole fraction of β-pinene including those of pure components, have been measured at 303.15, 308.15 and 313.15 K, except for the spectroscopic study where the temperature was maintained at 298.15 K. The experimental results deviation in viscosity, deviation in ultrasonic velocity, isentropic compressibility and deviation in isentropic compressibility are discussed in terms of molecular interactions between unlike molecules. The variation of these excess parameters indicates the presence of weak interactions between β-pinene and benzene, toluene, m-xylene and mesitylene molecules. Moreover, the viscosity data are discussed in terms of interaction parameters. The theoretical ultrasonic speed was computed using the Nomoto model, ideal mixing relation, Jacobson’s free length theory and compared with the experimentally measured values. The experimental values are also discussed in terms of FTIR spectroscopy.     

Refractive index and molar refractivity of benzonitrile, chlorobenzene, benzyl chloride and benzyl alcohol with benzene at T = 298.15, 303.15, 308.15 and 313.15 K

Densities and refractive indices were measured for the binary liquid mixtures formed by benzonitrile, chlorobenzene, benzyl chloride, and benzyl alcohol with benzene at (T = 298.15, 303.15, 308.15 and 313.15 K) and atmospheric pressure over the whole concentration range. The Lorentz–Lorentz mixing rule, the Ramaswami and Anbananthan model, and the model devised by Glinski were used to study the refractive index and molar refractivity. These results have been discussed to study the type of mixing behavior between the mixing molecules. The measured data were fitted to the Redlich–Kister polynomial relation to estimate the binary coefficients and standard errors. Furthermore, the McAllister multibody interaction model is used to correlate the binary refractive index with the experimental findings. It is observed that molar refractivity, molecular interaction, and association constant can be better understood from these models.     

Investigation of molecular interactions in binary mixture of dimethyl carbonate + N-methylformamide at T = (303.15, 308.15, 313.15 and 318.15) K

Journal of Thermal Analysis and Calorimetry - Density (ρ) and speed of sound (u) of binary liquid mixtures of dimethyl carbonate and N-methylformamide have been determined at...     

Densities,Refractive Indices,Ultrasonic Speeds and Excess Properties of Acetonitrile + Poly(ethylene glycol) Binary Mixtures at Temperatures from 298.15 to 313.15 K

The densities, ρ, refractive indices, n _D, and ultrasonic speeds, u, of binary mixtures of acetonitrile (AN) with poly(ethylene glycol) 200 (PEG200), poly(ethylene glycol) 300 (PEG300) and poly(ethylene glycol) 400 (PEG400) were measured over the entire composition range at temperatures (298.15, 303.15, 308.15 and 313.15) K and at atmospheric pressure. From the experimental data, the excess molar volumes, \( V_{\text{m}}^{\text{E}} \) , deviations in refractive indices, \( \Delta n_{\text{D}} \) , excess molar isentropic compressibility, \( K_{{s , {\text{m}}}}^{\text{E}} \) , excess intermolecular free length, \( L_{\text{f}}^{\text{E}} \) , and excess acoustic impedance, Z ^E, have been evaluated. The partial molar volumes, \( \overline{V}_{\text{m,1}} \) and \( \overline{V}_{\text{m,2}} \) , partial molar isentropic compressibilities, \( \overline{K}_{{s , {\text{m,1}}}} \) and \( \overline{K}_{{s , {\text{m,2}}}} \) , and their excess values over whole composition range and at infinite dilution have also been calculated. The variations of these properties with composition and temperature are discussed in terms of intermolecular interactions in these mixtures. The results indicate the presence of specific interactions among the AN and PEG molecules, which follow the order PEG200 < PEG300 < PEG400.     

Volumetric Properties of the Nucleoside Thymidine in Aqueous Solution at T = 298.15 K and p = (10 to 100) MPa

Sound speeds have been measured for aqueous solutions of the nucleoside thymidine at T = 298.15 K and at the pressures p = (10, 20, 40, 60, 80, and 100) MPa. The partial molar volumes at infinite dilution, $ V_{2}^{\text{o}} $ , the partial molar isentropic compressions at infinite dilution, $ K_{S,2}^{\text{o}} $ , and the partial molar isothermal compressions at infinite dilution, $ K_{T,2}^{\text{o}} $ $ \{ K_{T,2}^{\text{o}} = - (\partial V_{2}^{\text{o}} /\partial p)_{T} \} $ , have been derived from the sound speeds at elevated pressures using methods described in our previous work. The $ V_{2}^{\text{o}} $ and $ K_{T,2}^{\text{o}} $ results were rationalized in terms of the likely interactions between thymidine and the aqueous solvent. The $ V_{2}^{\text{o}} $ results were also compared with those calculated using the revised Helgeson–Kirkham–Flowers (HKF) equation of state.     

Thermo-physical properties of the binary mixture of benzaldehyde with bromobenzene at 303.15, 308.15, and 313.15?K

The values of density, viscosity, and ultrasonic velocity for the binary liquid mixture of benzaldehyde with bromobenzene have been measured over the entire range of composition at 303.15, 308.15, and 313.15?K. These values have been used to calculate the excess molar volume (V ^E), deviation in viscosity (????), deviation in velocity (?U), deviation in isentropic compressibility (??? _s), excess internal pressure (???), excess intermolecular free length (?L _f), and excess acoustic impedance (?Z). McAllister??s three-body-interaction model is used for correlating kinematic viscosity of binary mixtures. The excess values were correlated using the Redlich?CKister polynomial equation to obtain their coefficients and standard deviations. The thermo-physical properties (density, viscosity, and ultrasonic velocity) under the study were fitted to the Jouyban?CAcree model.     

Density and Viscosity of Alkyl Acetates + Aromatic Hydrocarbons at (303.15 and 313.15) K

Densities and viscosities have been determined for binary mixtures of isopropyl acetate or isobutyl acetate with o-xylene, m-xylene, p-xylene and ethyl benzene at (303.15 and 313.15) K for the entire composition range. The excess molar volumes and deviations in viscosity have been calculated from the experimental values. The variations of these parameters, with composition of the mixtures and temperature, have been discussed in terms of molecular interactions occurring in these mixtures. Further, the viscosities of these binary mixtures were calculated theoretically from their corresponding pure component data by using empirical relations, and the results were compared with the experimental findings.