Development of Vancomycin-Capped β-CD-Bonded Silica Particles as Chiral Stationary Phase for LC

Vancomycin-capped (3-(2-O-β-cyclodextrin)-2-hydroxypropoxy)-propylsilyl-appended silica particles (VCD-HPS), a new type of substituted β-cyclodextrin-bonded chiral stationary phase (CSP) for liquid chromatography (LC), have been synthesized by treatment of bromoacetate-substituted-(3-(2-O-β-cyclodextrin)-2-hydroxypropoxy)-propylsilyl-appended silica particles (BACD-HPS) with vancomycin in anhydrous methanol. The stationary phase is characterized by elemental analysis. This new CSP has a chiral selector with two recognition sites: vancomycin and β-cyclodextrin (β-CD), which can provide multiple interactions with the solutes. The chromatographic performance of VCD-HPS was studied with several disubstituted benzenes and some chiral drug compounds as solutes in reversed-phase LC. The results show that VCD-HPS has excellent selectivity for the separation of aromatic positional isomers and enantiomers of chiral compounds.     

A novel pillar[3]trianglimine macrocycle with a deep cavity used as a chiral selector to prepare a chiral stationary phase by thiol-ene click reaction for enantioseparation in high-performance liquid chromatography

A chiral pillar[3]trianglimine (C₆₀H₇₂N₆O₆) with a deep cavity has been developed as a chiral selector and bonded to thiolated silica by thiol-ene click reaction to fabricate a novel chiral stationary phase for enantioseparation in high-performance liquid chromatography. The enantioseparation performance of the fabricated chiral stationary phase has been evaluated by separating various racemic compounds, including alcohols, esters, amines, ketones, amino acids, and epoxides, in both normal-phase and reversed-phase elution modes. In total, 14 and 17 racemates have been effectively separated in these two separation modes, respectively. In comparison with two widely used chiral columns (Chiralcel OD-H and Chiralpak AD-H), our novel chiral stationary phase offered good chiral separation complementarity, separating some of the tested racemates that could not be separated or were only partially separated on these two commercial columns. The influences of analyte mass, mobile phase composition, and column temperature on chiral separation have been investigated. Good repeatability, stability, and column-to-column reproducibility of the chiral stationary phase for enantioseparation have been observed. After the fabricated column had been eluted up to 400 times, the relative standard deviations (n = 5) of resolution (Rs) and retention time of the separated analytes were < 0.39% and < 0.20%, respectively. The relative standard deviations (n = 3) of Rs and retention time for column-to-column reproducibility were < 4.6% and < 5.2%, respectively. This study demonstrated that the new chiral stationary phase has great prospects for chiral separation in high-performance liquid chromatography.     

Separation of α-cyclohexylmandelic acid enantiomers using biphasic chiral recognition high-speed counter-current chromatography

This work concentrates on a chiral separation technology named biphasic recognition applied to resolution of α-cyclohexylmandelic acid enantiomers by high-speed counter-current chromatography (HSCCC). The biphasic chiral recognition HSCCC was performed by adding lipophilic (−)-2-ethylhexyl tartrate in the organic stationary phase and hydrophilic hydroxypropyl-β-cyclodextrin in the aqueous mobile phase, which preferentially recognized the (−)-enantiomer and (+)-enantiomer, respectively. The two-phase solvent system composed of n-hexane-methyl tert-butyl ether–water (9:1:10, v/v/v) with the above chiral selectors was selected according to the partition coefficient and separation factor of the target enantiomers. Important parameters involved in the chiral separation were investigated, namely the types of the chiral selectors (CS); the concentration of each chiral selector; pH of the mobile phase and the separation temperature. The mechanism involved in this biphasic recognition chiral separation by HSCCC was discussed. Langmuirian isotherm was employed to estimate the loading limits for a given value of chiral selectors. Under optimum separation conditions, 3.5–22.0 mg of α-cyclohexylmandelic acid racemate were separated using the analytical apparatus and 440 mg of racemate was separated using the preparative one. The purities of both of the fractions including (+)-enantiomer and (−)-enantiomer from the preparative CCC separation were over 99.5% determined by HPLC and enantiomeric excess reached 100% for the (±)-enantiomers. Recovery for the target compounds from the CCC fractions reached 85–88% yielding 186 mg of (+)-enantiomer and 190 mg of (−)-enantiomer. The overall experimental results show that the HSCCC separation of enantiomer based on biphasic recognition, in which only if the CSs involved will show affinity for opposite enantiomers of the analyte, is much more efficient than the traditional monophasic recognition chiral separation, since it utilizes the cooperation of both of lipophilic and hydrophilic chiral selectors.     

Enantiomeric separation of oxybutynin by recycling high‐speed counter‐current chromatography with hydroxypropyl‐β‐cyclodextrin as chiral selector

Recycling high‐speed counter‐current chromatography was successfully applied to the preparative separation of oxybutynin enantiomers. The two‐phase solvent system consisted of n‐hexane, methyl tert‐butyl ether, and 0.1 mol/L phosphate buffer solution (pH = 5.0) with the volume ratio of 6:4:10. Hydroxypropyl‐β‐cyclodextrin was employed as the chiral selector. The influence of factors on the chiral separation process, including the concentration of chiral selector, the equilibrium temperature, the pH value of the aqueous phase were investigated. Under optimum separation conditions, 15 mg of oxybutynin racemate was separated with the purities of both the enantiomers over 96.5% determined by high‐performance liquid chromatography. Recovery for the target compounds reached 80–82% yielding 6.00 mg of (R)‐oxybutynin and 6.15 mg of (S)‐oxybutynin. Technical details for recycling elution mode were discussed.     

Evaluation of novel amylose and cellulose-based chiral stationary phases for the stereoisomer separation of flavanones by means of nano-liquid chromatography

Three polysaccharide-based chiral stationary phases, Sepapak^® 1, Sepapak^® 2 and Sepapak^® 3 have been evaluated in the present work for the stereoisomer separation of a group of 12 flavonoids including flavanones (flavanone, 4′-methoxyflavanone, 6-methoxyflavanone, 7-methoxyflavanone, 2′-hydroxyflavanone, 4′-hydroxyflavanone, 6-hydroxyflavanone, 7-hydroxyflavanone, hesperetin, naringenin) and flavanone glycosides (hesperidin, naringin) by nano-liquid chromatography (nano-LC). The behaviour of these chiral stationary phases (CSPs) towards the selected compounds was studied in capillary columns (100 μm internal diameter (i.d.)) packed with the above mentioned CSPs using polar organic, reversed and normal elution modes. The influence of nature and composition of the mobile phase in terms of concentration and type of organic modifier, buffer type and water content (reversed phase elution mode) on the enantioresolution (R_s), retention factor (k) and enantioselectivity (α) was evaluated. Sepapak^® 3 showed the best chromatographic results in terms of enantioresolution, enantioselectivity and short analysis time, employing a polar organic phase mode. A mixture of methanol/isopropanol (20/80, v/v) as mobile phase enabled the chiral separation of eight flavanones with enantioresolution factor (R_s) in the range 1.15–4.18. The same analytes were also resolved employing reversed and normal phase modes with mixtures of methanol/water and hexane/ethanol at different ratios as mobile phases, respectively. Loss in resolution for some compounds, broaden peaks and longer analysis times were observed with these last two chromatographic elution modes.     

Separation of chiral furan derivatives by liquid chromatography using cyclodextrin-based chiral stationary phases

The enantiomeric separation of a set of 30 new chiral furan derivatives has been achieved on native and derivatized beta-cyclodextrin stationary phases using high performance liquid chromatography (HPLC). The hydroxypropyl-beta-cyclodextrin (Cyclobond RSP), the 2,3-dimethyl-beta-cyclodextrin (Cyclobond DM), and the acetyl-beta-cyclodextrin (Cyclobond AC) stationary phases are the most effective chiral stationary phases (CSPs) for the separation of these racemates in the reverse phase mode. No enantioseparations have been observed on the native beta-cyclodextrin chiral stationary phase (Cyclobond I 2000) and only a few separations have been attained on the S-naphthylethyl carbamate beta-cyclodextrin (Cyclobond SN) and 3,5-dimethylphenyl carbamate beta-cyclodextrin (Cyclobond DMP) chiral stationary phases in the reverse phase mode. The polar organic and the normal phase mode on these CSPs are not effective for separation of these compounds. The characteristics of the analytes, including steric bulk, hydrogen bonding ability, and geometry, play an important role in the chiral recognition process. The pH affects the enantioseparation of compounds with ionizable groups and the addition of 0.5% methyl tert-butyl ether to the mobile phase significantly enhances the separation efficiency for some highly retained compounds.     

Chiral metal–organic framework used as stationary phases for capillary electrochromatography

Metal–organic frameworks (MOFs) have received great attention as novel media in separation sciences because of their fascinating structures and unusual properties. However, to the best of our knowledge, there has been no attempt to utilize chiral MOFs as stationary phases in capillary electrochromatography (CEC). In this study, a homochiral helical MOF [Zn₂(D-Cam)₂(4,4′-bpy)]_n (D-Cam = D-(+)-camphoric acid, 4,4′-bpy = 4,4′-bipyridine) was explored as the chiral stationary phase in open tubular capillary electrochromatography (OT-CEC) for separation of chiral compounds and isomers. The MOFs coated column has been developed using a simple procedure via MOFs post-coated on the sodium silicate layer. The baseline separations of flavanone and praziquantel were achieved on the MOFs coated column with high resolution of more than 2.10. The influences of pH, organic modifier content and buffer concentration on separation were investigated. Besides, the separations of isomers (nitrophenols and ionones) were evaluated. The relative standard deviations (RSDs) for the retention time of run-to-run, day-to-day and column-to-column were 1.04%, 2.16% and 3.07%, respectively. The results demonstrated that chiral MOFs are promising for enantioseparation in CEC.     

A Validated LC Method for Determination of the Enantiomeric Purity of Montelukast Sodium in Bulk Drug Samples and Pharmaceutical Dosage Forms

A new and accurate chiral liquid chromatographic method has been developed for determination of the enantiomeric purity of montelukast sodium (R enantiomer) in bulk drugs and dosage forms. Normal phase chromatographic separation was performed on an immobilized amylose-based chiral stationary phase with n-hexane–ethanol–1,4-dioxane–trifluoroacetic acid–diethylamine 65:25:10:0.3:0.05 (v/v) as mobile phase at a flow rate of 1.0 mL min^?1. The elution time was approximately 15 min. The resolution (R _S) between the enantiomers was >3. The mobile phase additives trifluoroacetic acid and diethylamine played a key role in achieving chromatographic resolution between the enantiomers and also in enhancing chromatographic efficiency. Limits of detection and quantification for the S enantiomer were 0.07 and 0.2 μg, respectively, for a test concentration of montelukast sodium of 1,000 μg mL^?1 and 10 μL injection volume. The linearity of the method for the S enantiomer was excellent (R ² > 0.999) over the range from the LOQ to 0.3%. Recovery of the S enantiomer from bulk drug samples and dosage forms ranged from 97.0 to 103.0%, indicative of the high accuracy of the method. Robustness studies were also conducted. The sample solution stability of montelukast sodium was determined and the compound was found to be stable for a study period of 48 h.     

A β-cyclodextrin covalent organic framework used as a chiral stationary phase for chiral separation in gas chromatography

Chiral covalent organic frameworks(CCOFs) featuring chirality, stability, and good porosity have attracted a considerable amount of attention due to their important applications, such as asymmetric catalysis, chiral separation, and chiral recognition. In this study, a β-cyclodextrin(β-CD) covalent organic framework(β-CD-COF) diluted with polysiloxane OV-1701 was explored as a novel chiral stationary phase(CSP) for gas chromatography(GC) separation of racemates. The β-CD-COF coated capillary colu...     

Synthesis of chiral phosphonobenzaldehydes and phosphonotyrosine

A method for obtaining of chiral phosphonobenzaldehydes has been developed. The Abramov reaction between dimenthyl phosphite and 4-diethoxymethylbenzaldehyde followed by separation of stereoisomers has yielded enantiomerically pure (1S)- and (1R)-1-hydroxyphosphonates. The resulting phosphonates, after removal of acetal protection, have been converted to (1S)- and (1R)-1-hydroxymethylphosphonobenzaldehydes. By reacting with (diethylamino)trifluorosulfurane, 1-hydroxyphosphonates have been converted to 4-(1-fluoromethyl)phosphonobenzaldehydes. The synthesized chiral phosphonobenzaldehydes are convenient chiral reactants for the preparation of phosphorus analogs of natural compounds, as has been shown with the example of synthesis of the phosphonium analog of phosphotyrosine.     

Enantioseparation of phenylsuccinic acid by high speed counter-current chromatography using hydroxypropyl-β-cyclodextrin as chiral selector

High speed counter-current chromatography (HSCCC) was successfully applied to resolution of phenylsuccinic acid (PSA) with hydroxypropyl-β-cyclodextrin (HP-β-CD) as chiral selector (CS). The two-phase solvent system composed of n-hexane–methyl tert-butyl ether–0.1 mol L⁻¹ phosphate buffer solution with pH = 2.51 (0.5:1.5:2, v/v/v) was selected. Influence factors involved in the chiral separation were investigated, including the concentration of chiral selector, pH value of the aqueous phase, the separation temperature, and the thermodynamic parameters of inclusion complex were calculated. The complex formation constants were determined using analytical instrument. Two HSCCC elution modes were studied and peak resolution equation was discussed. Under optimum separation conditions, 712 mg of PSA racemate was separated using preparative apparatus. The purities of both of the fractions including (+)-PSA and (−)-PSA from the preparative CCC separation were over 98.5% determined by HPLC and enantiomeric excess of (+)-PSA and (−)-PSA reached 97.6% and 98.6%, respectively. Recovery for the target compounds from the CCC fractions reached 80–82% yielding 285 mg of (+)-PSA and 292 mg of (−)-PSA.     

Direct TLC Resolution of (±)-Ketamine and (±)-Lisinopril by Use of (+)-Tartaric Acid or (−)-Mandelic Acid as Impregnating Reagents or Mobile Phase Additives. Isolation of the Enantiomers

Direct resolution of the enantiomers of the racemic drugs ketamine and lisinopril has been achieved by TLC. Enantiomerically pure tartaric acid and mandelic acid were used as chiral impregnating reagents and as mobile phase additives. When (?)-mandelic acid was used as chiral impregnating reagent use of ethyl acetate–methanol–water 3:1:1 (v/v) as mobile phase enabled successful resolution of the enantiomers of both compounds. For lisinopril, the mobile phase acetonitrile–methanol–water–dichloromethane 7:1:1:0.5 (v/v) was successful when (+)-tartaric acid was used as impregnating agent. When (+)-tartaric acid was used as mobile phase additive the mobile phase acetonitrile–methanol–(+)-tartaric acid (0.5% in water, pH 5)–glacial acetic acid 7:1:1.1:0.7 (v/v) enabled successful resolution of the enantiomers of lisinopril. The effects on resolution of temperature, pH, and the amount of chiral selector were also studied. The separated enantiomers were isolated and identified. Spots were detected with iodine vapour. LODs were 0.25 and 0.27 μg for each enantiomer of ketamine with (+)-tartaric acid and (?)-mandelic acid, respectively, whereas for lisinopril LODs were 0.14 and 0.16 μg for each enantiomer with (+)-tartaric acid (both conditions) and (?)-mandelic acid, respectively.     

LC Enantioseparation of Aryl-Substituted β-Lactams Using Variable-Temperature Conditions

Direct reversed-phase high-performance liquid chromatographic methods were developed for the separation of enantiomers of β-lactams. The enantiomers of 7 aryl-substituted β-lactams were separated on chiral stationary phases containing the macrocyclic glycopeptide antibiotic teicoplanin (Chirobiotic T) and teicoplanin aglycone (Chirobiotic TAG) at 10-°C increments in the range 5–45 °C, using different compositions of 0.1% aqueous triethylammonium acetate (pH 4.1)/methanol (v/v) as mobile phase. The mobile phase composition and temperature were varied to achieve baseline resolutions in a single chromatographic run. The dependence of the natural logarithms of the selectivity factors ln α on the inverse of temperature, 1/T, was used to determine the thermodynamic data on the enantiomers. The thermodynamic data revealed that all the compounds in this study undergo separation via the same enthalpy-driven chiral recognition mechanism. The different methods were compared in systematic chromatographic examinations. The effects of the organic modifier, the mobile phase composition and the temperature on the separation were investigated.     

Homochiral metal–organic framework used as a stationary phase for high‐performance liquid chromatography

Metal–organic frameworks are promising porous materials. Chiral metal–organic frameworks have attracted considerable attention in controlling enantioselectivity. In this study, a homochiral metal–organic framework [Co₂(D‐cam)₂(TMDPy)] (D‐cam = d ‐camphorates, TMDPy = 4,4′‐trimethylenedipyridine) with a non‐interpenetrating primitive cubic net has been used as a chiral stationary phase in high‐performance liquid chromatography. It has allowed the successful separation of six positional isomers and six chiral compounds. The good selectivity and baseline separation, or at least 60% valley separation, confirmed its excellent molecular recognition characteristics. The relative standard deviations for the retention time of run‐to‐run and column‐to‐column were less than 1.8 and 3.1%, respectively. These results demonstrate that [Co₂(D‐cam)₂(TMDPy)] may represent a promising chiral stationary phase for use in high‐performance liquid chromatography.     

A Validated LC Method for Determination of the Enantiomeric Purity of Darifenacin in Bulk Drug and Extended Release Tablets

A new and accurate chiral liquid chromatographic method has been developed for the determination of enantiomeric purity of darifenacin [(S)-enantiomer] in bulk drugs and extended release tablets. Normal phase chromatographic separation was performed on an immobilized cellulose based chiral stationary phase (Chiralpak-IC) with n-hexane:ethanol:diethylamine (50:50:0.3, v/v/v) as mobile phase at a flow rate of 1.0 mL min^?1. The elution time was ~15 min. The resolution (R _s ) between the enantiomers was greater than four and interestingly the (R)-enantiomer was eluted prior to darifenacin in the developed method. The limit of detection (LOD) and limit of quantification (LOQ) for the (R)-enantiomer were 0.02 μg and 0.07 μg, respectively, for a 10 μL injection volume. The method was extensively validated in terms of linearity, precision and accuracy and satisfactory results were obtained. Robustness studies were also conducted. The sample solution stability of darifenacin was determined and the compound was found to be stable for a study period of 48 h.     

Preparation of Cyclodextrin Type Stationary Phase Based on Graphene Oxide and Its Application in Enantioseparation and Hydrophilic Interaction Chromatography

Graphene oxide (GO) was covalently coupled to the surface of amino silica gel by amide bond. β-cyclodextrin (β-CD) was further chemically bonded with GO to prepare a novel chiral stationary phase. The resulting material was characterized by Fourier transform-infrared (FT-IR) spectra, scanning electron microscopy (SEM), transmission electron microscopy (TEM), elemental analysis and thermogravimetric analysis (TGA). The separation of seven enantiomers was improved in varying degrees. Meanwhile, the stationary phase showed typical characteristics of hydrophilic interaction chromatography (HILIC), and four small nucleoside molecules were separated with the mobile phase of methanol-acetonitrile-water (45:45:10, V/V) in the HILIC mode. In addition, the separation mechanism of the stationary phase was further explored by studying the effects of mobile phase composition, temperature and pH value on the analyte retention. The low temperature was conducive to the separation of analytes at 20–60 °C. The addition of protonated solvent methanol significantly decreased the retention time of the four analytes. The change of pH affected the degree of protonation of the analyte, the interaction between analytes and the stationary phase, and retention time of analytes. The results showed that GO and β-CD played a synergistic effect in the chiral resolution of the chromatographic stationary phase. The retention of analytes in HILIC was attributed to their mixed-mode retention mechanisms including hydrophilic interaction, electrostatic interaction, hydrogen bonding, π-π stacking and so on.     

Development and Validation of a Chiral Liquid Chromatographic Assay for Enantiomeric Separation and Quantification of Verapamil in Rat Plasma: Stereoselective Pharmacokinetic Application

A novel, fast and sensitive enantioselective HPLC assay with a new core–shell isopropyl carbamate cyclofructan 6 (superficially porous particle, SPP) chiral column (LarihcShell-P, LSP) was developed and validated for the enantiomeric separation and quantification of verapamil (VER) in rat plasma. The polar organic mobile phase composed of acetonitrile/methanol/trifluoroacetic acid/triethylamine (98:2:0.05: 0.025, v/v/v/v) and a flow rate of 0.5 mL/min was applied. Fluorescence detection set at excitation/emission wavelengths 280/313 nm was used and the whole analysis process was within 3.5 min, which is 10-fold lower than the previous reported HPLC methods in the literature. Propranolol was selected as the internal standard. The S-(−)- and R-(+)-VER enantiomers with the IS were extracted from rat plasma by utilizing Waters Oasis HLB C18 solid phase extraction cartridges without interference from endogenous compounds. The developed assay was validated following the US-FDA guidelines over the concentration range of 1–450 ng/mL (r² ≥ 0.997) for each enantiomer (plasma) and the lower limit of quantification was 1 ng/mL for both isomers. The intra- and inter-day precisions were not more than 11.6% and the recoveries of S-(−)- and R-(+)-VER at all quality control levels ranged from 92.3% to 98.2%. The developed approach was successfully applied to the stereoselective pharmacokinetic study of VER enantiomers after oral administration of 10 mg/kg racemic VER to Wistar rats. It was found that S-(−)-VER established higher C_max and area under the concentration-time curve (AUC) values than the R-(+)-enantiomer. The newly developed approach is the first chiral HPLC for the enantiomeric separation and quantification of verapamil utilizing a core–shell isopropyl carbamate cyclofructan 6 chiral column in rat plasma within 3.5 min after solid phase extraction (SPE).     

Resolution of α-cyclohexyl-mandelic acid enantiomers by two-phase (O/W) recognition chiral extraction

This paper presents a new chiral separation technology: two-phase (O/W) recognition chiral extraction. Distribution behavior of α-cyclohexyl-mandelic acid enantiomers was studied in the extraction system with D(L)-isobutyl tartrate in 1,2-dichloroethane organic phase and β-CD derivatives in aqueous phase, and the influence of the kind and concentration of extractant and pH on extraction performance was investigated. The experimental results indicate that two-phase (O/W) recognition chiral extraction is of strong chiral separation ability. HP-β-CD, HE-β-CD and Me-β-CD have higher recognition ability for S-CHMA than that for R-CHMA, among which HP-β-CD has the strongest ability; whereas, D-isobutyl tartrate has reversed recognition ability for them. In the extraction system containing HP-β-CD and D-isobutyl tartrate, e.e.% of S-CHMA in aqueous phase reached 27.6% by one stage extraction, and the distribution ratio for R-CHMA(k _R ) and for S-CHMA(k _s ) and separation factor (α) are 2.44, 0.89 and 2.49, respectively. Meanwhile, pH and concentration of extractant have great effects on chiral separation ability. Two-phase (O/W) recognition chiral extraction has great significance for preparative separation of racemic compounds.     

Determination of the absolute configuration of the enantiomers of dihydroquinolines, isolated by chiral chromatography, by non empirical analysis of circular dichroism spectra and X-ray analysis

The enantiomers of racemic 3,4-dihydroquinolines with an acetal or thioacetal spiro ring and a quaternary stereogenic carbon have been isolated through semipreparative chiral chromatography using a polysaccharide-derived chiral stationary phase (Chiralpak AD) and n-hexane/ethanol as a mobile phase. The absolute configurations of the enantiomers of four compounds have been determined by a comparison of density functional theory (DFT) calculations of their electronic circular dichroism (ECD) spectra with the experimental ECD data. A detailed conformer population search to achieve a conformational average of these compounds was crucial, due to the flexibility of these molecules. The conformer distribution was evaluated by spartan 02 and the structure of each of the conformers found within 4 kcal/mol energy range was optimized with DFT. The final calculated ECD spectrum obtained after Boltzmann averaging was compared with the ECD spectrum of the less well retained enantiomer and the correlation (R)/(−) was established for all compounds. The monocrystals of both enantiomers of one compound were obtained from the HPLC eluates. Their absolute configurations were determined by X-ray crystallographic analysis and confirmed by ECD analysis. In all cases, the second-eluted enantiomer in chiral HPLC exhibits an (R)-configuration.     

Formation of Chiral Structures in UV-Initiated Formose Reaction

It has been found that the UV-initiated formose reaction in an extremely concentrated aqueous solution of formaldehyde gives sugars and other biologically significant chiral compounds with sp³-hybridized carbon atom. The reaction leads to an optically active condensed phase, which is a result of the spontaneous spatial separation of enantiomers in the racemate into the antipodes, similarly to the separation of enantiomers of different chirality sign in the famous Pasteur experiments. In our opinion, such a scenario is as close as possible to the actually realized de novo scenario of synthesis of chiral prebiotic molecules and matrices.