Visible‐light‐driven photocatalytic degradation using Mn‐doped SrMoO4 nanoparticles

Mn‐doped SrMoO₄ nanocrystals were synthesized by thermal decomposition of metal–organic salt in an organic solvent with the doping content in the range 0–12 mol%. The structures, morphologies and optical properties were characterized using various techniques. The results suggest that Mo sites in the SrMoO₄ lattice are substituted by the Mn dopant, the adsorption bands are found to be shifted toward the visible light region and the band gap becomes narrower correspondingly. The photocatalytic performance of the as‐synthesized product was determined using the degradation of methylene blue by visible light irradiation. The photocatalytic performance is enhanced with Mn doping, and the optimal degradation rate is 85% in 140 min for 5 mol% Mn doping. The enhanced photocatalytic activity with Mn doping may be ascribed to the energy band adjustment and effective photogenerated electron–hole separation caused by the Mn doping. A possible photocatalytic mechanism is also discussed.     

Enhanced visible‐light‐driven photocatalytic activity of F doped reduced graphene oxide ‐ Bi2WO6 photocatalyst

The reduced graphene oxide‐Bi₂WO₆ (rGO‐BWO) photocatalysts with the different R_F/O values (molar ratio of the F molar mass and the O's molar mass of Bi₂WO₆) had been successfully synthesized via one‐step hydrothermal method. The F‐doped rGO‐BWO samples were characterized by X‐ray diffraction patterns (XRD), field‐emission scanning electron microscopy (FE‐ESEM), transmission electron microscopy (TEM), Brunauer–Emmett–Teller surface area (BET), X‐ray photoelectron spectroscopy (XPS) and UV–vis diffuse reflectance spectra (DRS). The results indicate that F^? ions had been successfully doped into rGO‐BWO samples. With the increasing of the R_F/O values from 0 to 2%, the evident change of the morphology and the absorption edges of F‐doped rGO‐BWO samples and the photocatalytic activities had been enhanced. Moreover, the photocatalytic activity of F‐doped rGO‐BWO with R_F/O = 0.05 were better than rGO‐BWO and the other F‐doped rGO‐BWO under 500 W Xe lamp light irradiation. The enhanced photocatalytic activity can be attributed to the morphology of the intact microsphere that signify the bigger specific surface area for providing more possible reaction sites for the adsorption–desorption equilibrium of photocatalytic reaction, the introduction of F^? ions that may cause the enhancement of surface acidity and creation of oxygen vacancies under visible light irradiation, the narrower band gap which means needing less energy for the electron hole pair transition.     

Synthesis,Characterization, and Photocatalytic Activity of N‐Doped TiO2 Nanotubes

N‐doped TiO₂ nanotubes with high photocatalytic activity were prepared by the combination of sol‐gel process with hydrothermal treatment. The prepared materials are characterized with transmission electron microscopy (TEM), high‐resolution transmission electron microscopy (HRTEM), x‐ray diffraction (XRD), x‐ray photoelectron spectra (XPS), and UV‐vis spectra. Photocatalytic performance of the N‐doped TiO₂ nanotubes is studied by testing the degradation rate of methyl orange under UV irradiation. Obtained results indicate that N‐doped TiO₂ nanotubes have high catalytic activity for photocatalytic oxidation.     

Facile Synthesis of BiOI Nanoparticles at Room Temperature and Evaluation of their Photoactivity Under Sunlight Irradiation

In this study, highly photoactive BiOI nanoparticles (NPs) under sunlight irradiation were synthesized by a facile precipitation method using polyvinylpyrrolidone (PVP) at room temperature. The as‐prepared catalysts were characterized by X‐ray diffraction (XRD), scanning electron microscopy (SEM), transition electron microscopy (TEM), energy‐dispersive X‐ray spectroscopy (EDX), Fourier transform infrared (FTIR) and UV–vis diffuse reflectance spectra (UV–vis DRS). The results of XRD showed that PVP did not have any significant effect on tetragonal crystalline structure of BiOI. Also, using different amounts of PVP in the synthesis led to different morphologies and sizes of BiOI particles. It was found that using 0.2 g of PVP in the synthesis method changed morphology from 1‐μm platelets to NPs with size under 10 nm. In addition, the photocatalytic performance of prepared photocatalysts was evaluated in the photodegradation of reactive blue 19 (RB19) dye under sunlight irradiation. The BiOI synthesized using 0.2 g PVP (BiOI0.2) showed higher degradation efficiency compared to BiOI prepared without any additive. Excellent visible light photocatalytic properties of nano‐scaled BiOI0.2 samples compared to BiOI platelets could be attributed to higher surface‐to‐volume ratio and narrow band‐gap energy of as‐prepared BiOI0.2 NPs.     

Facile fabrication of ZnO/N‐doped helical carbon nanotubes composites with enhanced photocatalytic activity toward organic pollutant degradation

Novel ZnO/N‐doped helical carbon nanotubes (ZnO/N‐HCNTs) composites were successfully synthesized via a facile chemical precipitation approach at room temperature. The sample was well characterized by X‐ray diffraction (XRD), energy dispersive X‐ray spectroscopy (EDS), transmission electron microscopy (TEM) and ultraviolet–visible diffuse reflectance spectroscopy (UV–vis DRS). The photocatalytic activity was evaluated in the degradation of methylene blue (MB) aqueous solution under UV light irradiation. It is found that ZnO nanoparticles were highly and uniformly anchored on the surface and inner tubes of the N‐HCNTs with size of about 5 nm, and significantly enhanced the photocatalytic activity compared to pure ZnO. The enhanced photocatalytic activity of ZnO/N‐HCNTs composites can be ascribed to the integrative synergistic effect of effective interfacial hybridization between N‐HCNTs and ZnO nanoparticles and the prolonged lifetime of photogenerated electron–hole pairs. Moreover, the ZnO/N‐HCNTs could be easily recycled without any obvious decrease in photocatalytic activity and could be promote their application in the area of environmental remediation.     

Synthesis of iron‐based metal organic framework and its visible light‐driven photocatalytic degradation of dye pollutants

A novel metal–organic compound [Fe (ox)(phen)]_n (phen = 1,10‐Phennannthroline, ox = oxalate acid) has been hydrothermally synthesized and structurally characterized by X‐ray single‐crystal diffraction, X‐ray diffraction, IR, UV–vis diffuse reflectance spectroscopy and X‐ray photoelectron spectroscopy. The compound crystallized in monoclinic,space group P2₁ with a = 0.92289 (3) nm, b = 1.35719 (3) nm, c = 1.02012 (4) nm,β = 94.372 (2)°,V = 1.27402(8)nm³,Z = 2,and exhibited a 2D layer structure. The photocatalytic activities of the compound were evaluated by decomposing Rhodamine B (RhB) and methyl orange (MO) under the visible light irradiation. In addition, the mechanism of the photocatalytic properties were proposed during this process.     

WO3 Quantum Dots Decorated GO/Mg‐doped ZnO Composites for Enhanced Photocatalytic Activity under Nature Sunlight

Graphene oxide/Mg‐doped ZnO/tungsten oxide quantum dots composites (WQGOMZ) were prepared through co‐precipitation method, and were studied by X‐ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), X‐ray photoelectron spectroscopy (XPS), Fluorescence spectra (FL), and UV–vis diffuse reflection spectra. Furthermore, the photocatalytic activity of resultant WQGOMZ was evaluated under nature sunlight. Experimental results showed that WO₃QDs can remarkably heighten the photocatalytic activity of GOMZ composite, in which is nearly 6.58 times higher than that of GOMZ composite. Simultaneously, WQGOMZ composites possess optical memory ability and maintain high photocatalytic stability for more than 40 days. The enhanced photocatalytic activity and optical memory ability are attributed to the effective synergistic effect between ZnO and WO₃QDs.     

The photocatalytic performance for Mn-doping SrMoO4 reduced in H2/N2 mixture atmospheres

SrMoO₄ and Mn-doped SrMoO₄ nanoparticles have been synthesized by high temperature thermal decomposition of metal–organic salt in organic solvent with a high boiling point. Then they were reduced in H₂/N₂ mixture atmospheres at different reducing temperatures T_R. Samples were characterized by X-ray diffraction (XRD), UV–visible light spectrum (UV), and X-ray photoelectron spectroscopy (XPS). The XRD and XPS results showed that SrMoO₃ phase appears when the annealing temperature was 700 °C (SMO700). The light absorption edge shifted to the visible range and enhanced the visible light photocatalytic activity. The methyl blue (MB) solution was degraded, and the degradation efficiency was 80.30% in 120 min for SMO700 sample. For the 2%Mn doping SrMoO₄ sample, the efficiency of degradation reached 97.53% when the annealing temperature was 700 °C(2Mn-SMO700). The results showed that a certain amount of SrMoO₃ is helpful to improve the photocatalytic performance of SrMoO₄. In addition, the photocatalytic performance of SrMoO₄ was also related to Mn-doped amount, annealing temperature and annealing time in H₂/N₂ mixture atmospheres. The related mechanism was discussed.     

Synthesis,properties and mechanism of photodegradation of core–shell structured upconversion luminescent NaYF4:Yb3+,Er3+@BiOCl

Microspherical bismuth oxychloride (BiOCl) can only utilize ultraviolet (UV) light to promote photocatalytic reactions. To overcome this limitation, a uniform and thin BiOCl nanosheet was synthesized with a particle size of about 200 nm. As results of UV–visible diffuse reflectance spectroscopy showed, the band gap of this nanostructure was reduced to 2.78 eV, indicating that the BiOCl nanosheet could absorb and utilize visible light. Furthermore, the upconversion material NaYF₄ doped with rare earth ions Yb³⁺ and Er³⁺ emitted visible light at 410 nm following excitation with near‐infrared (NIR) light (980 nm), which could be utilized by BiOCl to produce a photocatalytic reaction. To produce a high‐efficiency photocatalyst (NaYF₄:Yb³⁺,Er³⁺@BiOCl), BiOCl‐loaded NaYF₄:Yb³⁺,Er³⁺ was successfully synthesized via a simple two‐step hydrothermal method. The as‐synthesized material was confirmed using X‐ray diffraction, scanning electron microscopy, X‐ray photoelectron spectroscopy as well as other characterizations. The removal ratio of methylene blue by NaYF₄:Yb³⁺,Er³⁺@BiOCl was much higher than that of BiOCl alone. Recycling experiments verified the stability of NaYF₄:Yb³⁺,Er³⁺@BiOCl, which demonstrated excellent adsorption, strong visible‐light absorption and high electron–hole separation efficiency. Such properties are expected to be useful in practical applications, and a further understanding of the NIR‐light‐responsive photocatalytic mechanism of this new catalytic material would be conducive to improving its structural design and function.     

Enhancing the Photocatalytic Activity of Sr4Al14O25: Eu2+, Dy3+ Persistent Phosphors by Codoping with Bi3+ Ions

The photocatalytic activity of Bismuth‐codoped Sr₄Al₁₄O₂₅: Eu²⁺, Dy³⁺ persistent phosphors is studied by monitoring the degradation of the blue methylene dye UV light irradiation. Powder phosphors are obtained by a combustion synthesis method and a postannealing process in reductive atmosphere. The XRD patterns show a single orthorhombic phase Sr₄Al₁₄O₂₅: Eu²⁺, Dy³⁺, Bi³⁺ phosphors even at high Bismuth dopant concentrations of 12 mol%, suggesting that Bi ions are well incorporated into the host lattice. SEM micrographs show irregular micrograins with sizes in the range of 0.5–20 μm. The samples present an intense greenish‐blue fluorescence and persistent emissions at 495 nm, attributed to the 5d–4f allowed transitions of Eu²⁺. The fluorescence decreases as Bi concentration increases; that suggest bismuth‐induced traps formation that in turn quench the luminescence. The photocatalytic evaluation of the powders was studied under both 365 nm UV and solar irradiations. Sample with 12 mol% of Bi presented the best MB degradation activity; 310 min of solar irradiation allow 100% MB degradation, whereas only 62.49% MB degradation is achieved under UV irradiation. Our results suggest that codoping the persistent phosphors with Bi³⁺ can be an alternative to enhance their photocatalytic activity.     

Optimal TiO2–Graphene Oxide Nanocomposite for Photocatalytic Activity under Sunlight Condition: Synthesis,Characterization, and Kinetics

TiO₂–graphene oxide nanocomposites have been fabricated by the sol–gel technique for degradation of a typical cationic dye solution. The prepared photocatalysts were characterized by X‐ray diffraction, Fourier transform infrared spectroscopy, thermogravimetric‐differential analyses, Brunauer–Emmett–Teller surface area measurement, and scanning and transmission electron microscopy. In addition, the photocatalytic activities of samples were evaluated by degradation of methylene blue aqueous solution under the sunlight irradiation. The change in color of solution was evaluated by the UV–vis spectroscopy, and the maximum photocatalytic decoloration (94%) was achieved within 60 min, which exceeded that of pure anatase under the same conditions. The results show that the nanocomposite containing 9.0 wt% of graphene oxide has the superior photocatalytic performance to either single‐phase anatase or other composites containing different amounts of graphene oxide. The experimental degradation data obtained from the batch tests were analyzed by a modified kinetic model, which predicted the performance with higher regression coefficients and lower relative errors. The distribution of TiO₂ nanoparticles (<20 nm) on graphene oxide sheets is proposed to be the efficient factor in the homogeneous degradation of dye which can concomitantly improve the photocatalytic activity.     

Preparation and Photocatalytic Activity of Mesoporous TiO2 Photocatalyst Co‐doped with Fe and H3PW12O40

The mesoporous titanium dioxide (MTiO₂) photocatalysts co‐doped with Fe and H₃PW₁₂O₄₀ were synthesized by template method using tetrabutyl titanate (Ti(OC₄H₉)₄), Fe(NO₃)k₃9H₂Oand H₃PW₁₂O₄₀ as precursors and Pluronic P123 as template. The as‐prepared photocatalyst was characterized by N₂ adsorption‐desorption measurements, X‐ray diffraction (XRD), scanning electron microscopy (SEM) and UV‐vis adsorption spectroscopy, and the photocatalytic activities of the prepared samples under UV and visible light were estimated by measuring the degradation rate of methyl blue (MB) (50 mg/L) in an aqueous solution. The characterizations indicated that the photocatalysts possessed a homogeneous pore diameter of ca. 10 nm with high surface area of ca. 150 m²/g. The results of MB photodecomposition showed that co‐doped mesoporous TiO₂ exhibited higher photocatalytic activities than un‐doped, single‐doped mesoporous TiO₂ under UV and visible light irradiation. It was shown that the co‐doped MTiO₂ could be activated by visible light and could thus be used as an effective catalyst in photo‐oxidation reactions. The synergistic effect of Fe and H₃PW₁₂O₄₀ co‐doping played an important role in improving the photocatalytic activity.     

Visible light photocatalytic activity of BiVO4 particles with different morphologies

Bismuth vanadate (BiVO₄) particles with different morphologies were synthesized by a one-step hydrothermal process and their optical and photocatalytic properties were investigated. Their crystal structure and microstructures were characterized using X-ray diffraction (XRD) and field emission scanning electron microscopy (FESEM). XRD patterns demonstrate that the as-prepared samples are monoclinic cell. FESEM shows that BiVO₄ crystals can be fabricated in different morphologies by simply manipulating the reaction parameters of hydrothermal process. The UV–visible diffuse reflectance spectra (UV–vis DRS) reveal that the band gaps of BiVO₄ photocatalysts are about 2.07–2.21 eV. The as-prepared BiVO₄ photocatalysts exhibit higher photocatalytic activities in the degradation of rhodamine B (Rh B) under visible light irradiation (λ > 420 nm) compared with traditional N-doped TiO₂ (N-TiO₂). Furthermore, wheat like BiVO₄ sample reveals the highest photocatalytic activity. Up to 100% Rh B is decolorized after visible light irradiation for 180 min. The reason for the difference in the photocatalytic activities for BiVO₄ samples obtained at different conditions were systematically studied based on their shape, size and the variation of local structure.     

Photocatalytic Activity of LaSr2AlO5:Eu Ceramic Powders

The photocatalytic activity, of undoped and Europium‐doped LaSr₂AlO₅ powders, has been investigated by degrading methylene blue dye in water solutions. Those powders were fabricated by a combustion method and an annealing treatment in air. All samples showed a tetragonal single phase according to by X‐ray diffraction measurements (XRD). Scanning electron microscopy (SEM) revealed irregular semi‐oval grains with sizes in the range of 3.5–4.27 μm. Photoluminescence spectrum showed sharp emission peaks at 588 nm and at 617 nm which are associated with ⁷F₁,⁷F₂→ ⁵D₀ Eu³⁺ ion forbidden transitions, respectively, under UV light excitation of 322 nm. The methylene blue (MB) degradation under UV light (254 nm) was studied by monitoring changes in the absorbance peak of MB at 665 nm. Finally, LaSr₂AlO₅:Eu powders were used three times and the efficiency for the degradation of MB decreased from 100 to 61% after the third cycle of use.     

Sol‐Gel Synthesis and Photocatalytic Study of Visible Light Active N‐Doped KSbWO6

KSbWO₆ was prepared by sol‐gel method. N‐doped KSbWO₆ (KSbWO_6–xN_x) was obtained by heating KSbWO₆ and urea at 400 °C. Both the compounds are characterized by powder X‐ray diffraction (XRD), TEM, SEM‐EDS, X‐ray photo electronic spectroscopy (XPS), and UV/Vis diffuse reflectance spectroscopy (UV‐DRS). A shift in the peak positions of powder XRD and XPS spectra was observed. The band gap energy (E_g) of KSbWO₆ and N‐doped KSbWO₆ was obtained from their diffused reflectance spectra.E_g was reduced from 3.17 eV to 2.56 eV upon nitrogen doping in KSbWO₆. The reduction of the E_g is attributed to the lifting of valence band of N‐doped KSbWO₆, due to the mixing of O 2p states with N 2p states. The photocatalytic activity of both the samples was studied by degradation of methylene blue (MB). The nitrogen doped KSbWO₆ shows higher photocatalytic activity compared to that of KSbWO₆.     

Accelerated ZnMoO4 photocatalytic degradation of pirimicarb under UV light mediated by peroxymonosulfate

This paper reports the optimized synthesis of zinc molybdates by the hydrothermal method and the combination of ZnMoO₄ and peroxymonosulfate (PMS) under UV irradiation for the degradation of pirimicarb. The as‐prepared ZnMoO₄ photocatalyst was characterized using X‐ray diffraction, scanning electron microscopy, X‐ray photoelectron spectroscopy and UV–visible diffuse reflectance spectroscopy. The effects of operational parameters in the ZnMoO₄/PMS/UV system were evaluated and the results indicated the highest performance is achieved with pH = 9.0, 1 mM PMS and 1 g l^?1 ZnMoO₄. The degradation efficiency of pirimicarb was 98% after 3 h in the photocatalytic process. A photodegradation mechanism is proposed based on scavenger and electron spin resonance studies to decide the main active species and by using chromatography–mass spectrometry to identify the major intermediates. Pirimicarb degradation is found to be mainly driven by holes and ?O₂^? radicals, with the contribution of ?OH and SO₄^?? radicals enhancing the process in the tested catalytic system. The mechanism is proposed involving two routes, dealkylation and decarbamoylation. Lastly, the zinc molybdate photocatalyst is shown to be stable, reusable and efficient in the removal of pirimicarb from real water samples in the presence of PMS, demonstrating potential application in the treatment of contaminated and/or environmental water.     

Excellent photocatalytic reduction of nitroarenes to aminoarenes by BiVO4 nanoparticles grafted on reduced graphene oxide (rGO/BiVO4)

A novel heterogeneous composite material based on reduced graphene oxide (rGO) and bismuth vanadate (BiVO₄) was prepared and characterized by various techniques such as powder XRD, HRTEM, EADX, UV–Vis‐DRS, FT‐IR, Raman, BET and XPS analyses. The characterization results reveal that the rGO well decorated by BiVO₄. The electrochemical impedance spectroscopy (EIS) shows the increasing of charge transfer of rGO/BiVO₄ in presence of light irradiation. In this research, the pure BiVO₄ and rGO/BiVO₄ composite have been explored for photocatalytic reduction of nitroarenes. Among the prepared nanocomposites, rGO loaded with 10% BiVO₄ catalyst (noted as rGO/BiVO₄–10%) shows the best performance for the photo‐reduction of various nitroaromatic molecules to their corresponding amine compounds under visible‐light irradiation at room temperature. The catalyst exhibited in particular excellent photocatalytic activity for the conversion of 1,4‐dinitrobenzene to 4‐nitroanilline (100% conversion) in 20 min, 4‐chloronitrobenzene to 4‐chloroaniline and 2‐nitrophenol to 2‐aminophenol (100% conversion) in only 30 min. In addition, the conversion of 4‐bromonitrobenzene, 4‐iodonitrobenzene to their corresponding amine compounds (100% conversion) was achieved in 60 min. The catalyst was recovered for several times and reused without decreasing of its efficiency.     

Preparation of Ce‐doped TiO2 Hollow Fibers and Their Photocatalytic Degradation Properties for Dye Compound

Cerium‐doped titanium dioxide (TiO₂) with a hollow fiber structure was successfully prepared using ammonium ceric nitrate and tetrabutyltitanate as precursors and cotton fiber as the template. The effects of cerium (Ce)‐doping on the crystallite sizes, crystal pattern, and optical property of the prepared catalysts were investigated by means of techniques such as scanning electron microscopy (SEM), X‐ray diffraction (XRD), BET surface area, and UV‐vis diffuse absorption spectroscopy. SEM observation showed that the prepared TiO₂ fibers possessed fibrous shape inherited from the cotton fiber and had a hollow structure. As confirmed by XRD and UV‐vis diffuse absorption spectroscopy examinations, Ce‐doping restrained the growth of grain size and extended the photoabsorption edge of TiO₂ hollow fiber into the visible light region. The present photocatalyst showed higher photocatalytic reactivity in photodegradation of highly concentrated methylene blue (MB) solutions than pure TiO₂ under UV and visible light, and the amount of Ce‐doped significantly affected the catalytic property. In the experiment condition, the photocatalytic activity of 0.5 mol% Ce‐doped TiO₂ fiber was optimal of all the prepared samples. In addition, the possibility of cyclic usage of the photocatalyst was also confirmed. The material was easily removed by centrifugal separation. Therefore, using the template method and by doping with cerium, TiO₂ may hopefully become a low‐energy consuming, high activity and green environmentally friendly catalytic material.     

Li‐doped nanosized TiO2 powder with enhanced photocalatylic acivity under sunlight irradiation

This work reports on the synthesis of Li‐doped TiO₂ nanoparticles using the sol–gel process and solid‐state sintering, and investigates their potential use as a photocatalyst for degradation under sunlight excitation of different organic model compounds in aqueous solution. The structure of the nanocrystals was examined by X‐ray diffraction, UV‐vis ground state diffuse reflectance absorption spectra and X‐ray photoelectron emission spectroscopy. Results showed that samples prepared by sol–gel process and calcined at 400 °C are composed of a mixture of anatase and rutile phases, in contrast to the one prepared by solid‐state sintering, which exhibits an anatase phase with Li being involved in a spinel phase. The photocatalytic degradation of aqueous solutions of different aromatic compounds was successfully achieved under sunlight excitation in presence of Li‐doped TiO₂ prepared via sol–gel process. It was shown that the calcination temperature and the preparation mode greatly affect the photocatalytic efficiency. Copyright © 2010 John Wiley & Sons, Ltd.     

Photodegradation of Rhodamine B on Sulfur Doped ZnO/TiO2 Nanocomposite Photocatalyst under Visible-light Irradiation

Sulfur doped ZnO/TiO₂ nanocomposite photocatalysts were synthesized by a facile sol‐gel method. The structure and properties of catalysts were characterized by X‐ray diffraction (XRD), X‐ray photoelectron spectroscopy (XPS), UV‐vis diffusive reflectance spectroscopy (DRS) and N₂ desorption‐adsorption isotherm. The XRD study showed that TiO₂ was anatase phase and there was no obvious difference in crystal composition of various S‐ZnO/TiO₂. The XPS study showed that the Zn element exists as ZnO and S atoms form SO^2?₄. The prepared samples had mesoporosity revealed by N₂ desorption‐adsorption isotherm result. The degradation of Rhodamine B dye under visible light irradiation was chosen as probe reaction to evaluate the photocatalytic activity of the ZnO/TiO₂ nanocomposite. The commercial TiO₂ photocatalyst (Degussa P25) was taken as standard photocatalyst to contrast the prepared different photocatalyst in current work. The improvement of the photocatalytic activity of S‐ZnO/TiO₂ composite photocatalyst can be attributed to the suitable energetic positions between ZnO and TiO₂, the acidity site caused by sulfur doping and the enlargement of the specific area. S‐3.0ZnO/TiO₂ exhibited the highest photocatalytic activity under visible light irradiation after Zn amount was optimized, which was 2.6 times higher than P25.