Fe3O4‐supported Schiff‐base copper (II) complex: A valuable heterogeneous nanocatalyst for one‐pot synthesis of new pyrano[2,3‐b]pyridine‐3‐carboxamide derivatives

A novel Cu (II) Schiff‐base complex immobilized on core‐shell magnetic Fe₃O₄ nanoparticles (Fe₃O₄@SPNC) was successfully designed and synthesized. The structural features of these nanoparticles were studied and confirmed by using various techniques including FT‐IR spectroscopy, scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy‐dispersive X‐ray spectroscopy (EDS), vibrating sample magnetometer (VSM), X‐Ray diffraction (XRD), wavelength dispersive X‐ray spectroscopy (WDX), and inductively coupled plasma (ICP). These newly synthesized nanoparticles have been used as efficient heterogeneous catalytic system for one‐pot multicomponent synthesis of new pyrano[2,3‐b]pyridine‐3‐carboxamide derivatives. Notably, the catalyst could be easily separated from the reaction mixture by using an external magnet and reused for several successive reaction runs with no significant loss of activity or copper leaching. The present protocol benefits from a hitherto unreported MNPs‐immobilized Cu (II) Schiff‐base complex as an efficient nanocatalyst for the synthesis of newly reported derivatives of pyrano[2,3‐b]pyridine‐3‐carboxamide from one‐pot multicomponent reactions.     

HAp‐encapsulated γ‐Fe2O3‐supported dual acidic heterogeneous catalyst for highly efficient one‐pot synthesis of benzoxanthenones and 3‐pyranylindoles

A novel method is reported for the synthesis of benzoxanthenone and 3‐pyranylindole derivatives via one‐pot three‐component reactions using a newly synthesized HAp‐encapsulated γ‐Fe₂O₃‐supported dual acidic heterogeneous catalyst, as a reusable and highly efficient nanocatalyst. In this protocol the use of the nanocatalyst provided a green, useful and rapid method to generate products in short reaction times (4–20 min) and in excellent yields (87–96%). The paramagnetic nature of the catalyst provided a simple, trouble‐free and facile approach for the separation of the catalyst by applying an external magnet, and it could be used in eight cycles without significant loss in catalytic efficiency.     

Synthesis of α‐Aminonitriles and 5‐Substituted 1H‐Tetrazoles Using an Efficient Nanocatalyst of Fe3O4@SiO2–APTES‐supported Trifluoroacetic Acid

Fe₃O₄@SiO₂–APTES‐supported trifluoroacetic acid nanocatalyst was used for the one‐pot synthesis of α‐aminonitriles via a three‐component reaction of aldehydes (or ketones), amines, and sodium cyanide. This method produced a high yield of 75–96% using only a small amount of the catalyst (0.05 g) in EtOH at room temperature. The catalyst was also employed for the synthesis of 5‐substituted 1H‐tetrazoles from nitriles and sodium azide in EtOH at 80°C. The tetrazoles were produced with good‐to‐excellent yields in a short reaction time of 4 h. Both synthetic methods were carried out in the absence of an organic volatile solvent. Because the supported trifluoroacetic acid generated a solid acid on the surface, thus the acid corrosiveness was not a serious challenge. This heterogeneous nanocatalyst was magnetically recovered and reused several times without significant loss of catalytic activity.     

Supramolecular Fe3O4@PEG/−diaza crown ether@Ni: a novel magnetically reusable nano catalyst for the clean synthesis of 2‐aryl‐2,3‐dihydroquinazolin‐4(1H)‐ones

Ni@diaza crown ether complex supported on magnetic nanoparticle was provided by grafting technique. The catalytic activity of Fe₃O₄@diaza crown ether@Ni was explored through one‐pot synthesis of 2,3‐dihydroquinazolin‐4(1H)‐ones and it was used as an efficient and recoverably constant nanocatalyst. FT‐IR, SEM, TEM, XRD, BET, ICP, EDS, and TGA techniques were employed to specify the nanocatalyst. This heterogeneous catalyst demonstrated acceptable recyclability and could be used again several times with no considerable loss of its catalytic activity.     

One‐pot multicomponent synthesis of novel 2‐(piperazin‐1‐yl) quinoxaline and benzimidazole derivatives,using a novel sulfamic acid functionalized Fe3O4 MNPs as highly effective nanocatalyst

The immobilization of sulfonic acid on the surface of Fe₃O₄ magnetic nanoparticles (MNPs) as a novel acid nanocatalyst has been successfully reported. The morphological features, thermal stability, magnetic properties, and other physicochemical properties of the prepared superparamagnetic core–shell (Fe₃O₄@PFBA–Metformin@SO₃H) were thoroughly characterized using Fourier transform infrared (FTIR), X‐ray diffraction (XRD), energy‐dispersive X‐ray spectroscopy (EDS), field‐emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), thermogravimetric analysis–differential thermal analysis (TGA‐DTA), atomic force microscopy (AFM), dynamic light scattering (DLS), Brunauer–Emmett–Teller (BET), and vibrating sample magnetometer (VSM) techniques. It was applied as an efficient and reusable catalyst for the synthesis of 2‐(piperazin‐1‐yl) quinoxaline and benzimidazole derivatives via a one‐pot multiple‐component cascade reaction under green conditions. The results displayed the excellent catalytic activity of Fe₃O₄@PFBA–metformin@SO₃H as an organic–inorganic hybrid nanocatalyst in condensation and multicomponent Mannich‐type reactions. The easy separation, simple workup, excellent stability, and reusability of the nanocatalyst and quantitative yields of products and short reaction time are some outstanding advantages of this protocol.     

Regioselective Conversion of Arenes to N‐aryl‐1,2,3‐triazoles Using CH Borylation

A one‐pot protocol for the synthesis of N‐aryl 1,2,3‐triazoles from arenes by an iridium‐catalyzed C?H borylation/copper catalyzed azidation/click sequence is described. 1 mol % of Cu(OTf)₂ was found to efficiently catalyze both the azidation and the click reaction. The applicability of this method is demonstrated by the late‐stage chemoselective installation of 1,2,3‐triazole moiety into unactivated molecules of pharmaceutical importance.     

Highly reusable support‐free copper(II) complex of para‐hydroxy‐substituted salen: Novel,efficient and versatile catalyst for C─N bond forming reactions

An air‐stable, highly active and versatile method for C─N bond forming reactions is reported. Under mild conditions using a highly reusable support‐free Cu(II)–salen complex, structurally diverse N ‐aryl‐substituted compounds were obtained via direct C─N bond forming reaction of HN‐heterocycles with aryl iodides or three‐component C─N bond forming reaction of 2‐bromobenzaldehyde, aniline derivatives and sodium azide in good to excellent yields. C─N bond forming reaction for benzimidazole derivatives was also performed in the presence of the catalyst under ambient conditions. A series of hybrid benzimidazoles bearing morpholine, tetrazole and quinoxaline backbones were produced using this method. All reactions were performed in short times under air. The Cu(II) catalyst could be reused up to eight times in the direct cross‐coupling reaction of 9H –carbazole with iodobenzene without any decrease in its catalytic activity.     

Design and preparation of ZnS‐ZnFe2O4: a green and efficient hybrid nanocatalyst for the multicomponent synthesis of 2,4,5‐triaryl‐1H‐imidazoles

In the present work, a new protocol was introduced for the preparation of an efficient hybrid nanocatalyst ZnS‐ZnFe₂O₄ via the co‐precipitation method as well as its application in the synthesis of 2,4,5‐triaryl‐1H‐imidazoles derivatives starting from various aromatic aldehydes, benzil and ammonium acetate under ultrasonic irradiation in ethanol. ZnS‐ZnFe₂O₄ was characterized by Fourier transform infrared (FT‐IR) spectroscopy, energy‐dispersive X‐ray spectroscopy (EDS) analysis, scanning electron microscopy (SEM) image, X‐ray diffraction (XRD) pattern and vibrating sample magnetometer (VSM) curve. This method has advantages such as high efficiency of the heterogeneous catalyst, the use of environmentally‐friendly solvent, high yields, short reaction times and easy isolation of the products and chromatography‐free purification. Our outcomes illustrated that the present nanocatalyst with nearly spherical and Cauliflower‐like morphology and average particle size of 36 nm could be applied as an effective and magnetically recyclable catalyst without any significant decreasing of activity. Furthermore, the synergic effect of bimetallic Lewis acids was studied for the synthesis of imidazole derivatives.     

Enantioselective synthesis of 3‐amino‐1‐aryl‐1H‐benzo[f]chromene‐2‐carbonitrile derivatives by Fe3O4@PS‐arginine as an efficient chiral magnetic nanocatalyst

A novel chiral magnetic nanocatalyst was prepared by the surface modification of Fe₃O₄ magnetic nanoparticles (MNPs) with a chloropropylsilane and further by arginine to form Fe₃O₄@propylsilan‐arginine (Fe₃O₄@PS‐Arg). After the structural confirmation of Fe₃O₄@PS‐Arg synthesized MNPs by Fourier transform‐infrared, X‐ray diffraction, field emission‐scanning electron microscopy, transmission electron microscopy, vibrating‐sample magnetometry and thermogravimetric analyses, their catalytic activity was evaluated for one‐pot enantioselective synthesis of 3‐amino‐1‐aryl‐1H‐benzo[f]chromene‐2‐carbonitrile derivatives. The results showed that in the presence of 0.07 g Fe₃O₄@PS‐Arg nanocatalyst and ethanol as solvent, the best reaction yield (96%) was obtained in the least time (5 min). Easy operation, reusability and stability, short reaction time, high reaction yields and good enantioselectivity are the major advantages of the newly synthesized nanocatalyst. Also, this study provides a novel strategy for further research and investigation on the synthesis of new reusable enantioselective catalysts and chiral compounds.     

Synthesis and application of novel 1,2,3‐triazolylferrocene‐containing ionic liquid supported on Fe3O4 nanocatalyst in the synthesis of new pyran‐substituted Betti bases

A novel magnetic ferrocene‐labelled ionic liquid based on triazolium, [Fe₃O₄@SiO₂@Triazol‐Fc][HCO₃], has been synthesized and has been successfully introduced as a recyclable heterogeneous nanocatalyst. The catalytic activity of the novel magnetic nanoparticles was evaluated in the one‐pot three‐component synthesis of a wide variety of Betti bases. A simple, facile and highly efficient green method has been developed for the synthesis of kojic acid‐containing Betti base derivatives at room temperature. Additionally, this new protocol has notable advantages such as short reaction times, green reaction conditions, high yields and simple workup and purification steps. Also, the novel nanocatalyst could be easily recovered using an external magnetic field and reused for six consecutive reaction cycles without significant loss of activity. The newly synthesized nanocatalyst was characterized using Fourier transform infrared spectroscopy, X‐ray diffraction, energy‐dispersive X‐ray spectroscopy, field emission scanning electron microscopy, transmission electron microscopy and Brunauer–Emmett–Teller measurements.     

Magnetic‐based picolinaldehyde–melamine copper complex for the one‐pot synthesis of hexahydroquinolines via Hantzsch four‐component reactions

A picolinaldehyde–melamine copper complex was loaded on a magnetic Fe₃O₄ core, so that it contained 0.33 mmol of Cu per gram, and was used as an efficient catalyst. The as‐synthesized catalyst was characterized using various techniques, including Fourier transform infrared spectroscopy, X‐ray diffraction, energy‐dispersive X‐ray spectroscopy, field emission scanning electron microscopy, transmission electron microscopy, vibrating sample magnetometry and thermogravimetric analysis. The catalyst was used to activate the raw materials in the synthesis of hexahydroquinoline derivatives in one‐pot four‐component reactions. Low reaction time (minutes versus half an hour), solvent‐free condition and magnetically separable catalyst are some salient features of the developed catalyst. Also, the optimum amount of catalyst and temperature were determined as 0.07 g and 87.6 °C, respectively, which were obtained using response surface methodology and optimization techniques.     

Preparation of an organic–inorganic hybrid based on synergy of Brønsted and Lewis acid centres as heterogeneous magnetic nanocatalyst for ultrafast synthesis of acetaminophen

A heterogeneous nanocatalyst based on a Cu(II) complex containing phosphotungstic acid and N/O‐donor ligands supported on cobalt ferrite nanoparticles was successfully prepared. The synthesized nanocatalyst was characterized using various techniques. The magnetic nanocatalyst was examined as an efficient and synergistic catalyst for ultrafast synthesis of acetaminophen at room temperature and under solventless conditions. The examined synergistic nanocatalyst, which has both Lewis and Brønsted acidic sites, could be easily separated from the reaction system and reused several times without significant loss of its activity. The synthesized acetaminophen was also fully characterized.     

A one‐pot method for synthesis of reduced graphene oxide‐supported Cu–Cu2O and catalytic application in tandem reaction of halides and sodium azide with terminal alkynes

Reduced graphene oxide (RGO)‐supported Cu–Cu₂O nanocomposite material (Cu‐Cu₂O@RGO) was prepared through a one‐pot reflux synthesis method. The morphology, crystal structure and composition of the prepared Cu‐Cu₂O@RGO were characterized using transmission electron microscopy, X‐ray diffraction, and X‐ray photoelectron, infrared and Raman spectroscopies. Cu‐Cu₂O@RGO as a heterogeneous catalyst was applied to tandem reactions of halides and sodium azide with terminal alkynes to synthesize effectively 1,4‐disubstituted 1,2,3‐triazoles. Moreover, the catalyst showed excellent recyclability performance with very little leaching of the metal. Compared with homogeneous catalysts, Cu‐Cu₂O@RGO as a green and efficient catalyst was recoverable, easy to separate and highly stable in the tandem method for the synthesis of 1,2,3‐triazole compounds.     

Cu–S‐(propyl)‐2‐aminobenzothioate on magnetic nanoparticles: highly efficient and reusable catalyst for synthesis of polyhydroquinoline derivatives and oxidation of sulfides

Cu–S‐(propyl)‐2‐aminobenzothioate supported on functionalized Fe₃O₄ magnetic nanoparticles is reported as a reusable and highly efficient nanocatalyst for the one‐pot synthesis of polyhydroquinoline derivatives and also for selective oxidation of sulfides to sulfoxides. The prepared nanoparticles were characterized using Fourier transform infrared spectroscopy, vibrating sample magnetometry, thermogravimetric analysis, transmission and scanning electron microscopies, energy‐dispersive X‐ray spectroscopy, X‐ray diffraction, inductively coupled plasma atomic emission spectroscopy and atomic absorption spectroscopy. The nanocatalyst was easily recovered using an external magnet and reused several times without significant loss of its catalytic efficiency. Copyright © 2016 John Wiley & Sons, Ltd.     

Copper/Graphene/Clay Nanohybrid: A Highly Efficient Heterogeneous Nanocatalyst for the Synthesis of Novel 1,2,3‐Triazolyl Carboacyclic Nucleosides via ‘Click’ Huisgen 1,3‐Dipolar Cycloaddition

A very mild and highly efficient synthesis of some novel 1H‐1,2,3‐triazolyl carboacyclic nucleosides via a ‘Click’ Huisgen cycloaddition of N‐propargyl nucleobases and azido alcohols using Cu/aminoclay/reduced graphene oxide nanohybrid (Cu/AC/r‐GO nanohybrid) as nanocatalyst is described. The preparation and characterization of Cu/AC/r‐GO nanohybrid are discussed. This catalyst was characterized by X‐ray diffraction, FT‐IR, TEM, and energy‐dispersive analysis of X‐ray techniques. Cu/AC/r‐GO nanohybrid is a stable and highly efficient heterogeneous nanocatalyst that can be easily prepared, used, and restored from the reaction mixture by simple filtration, and reused for many consecutive trials without significant decrease in activity.     

Silica‐supported Cu(II)–quinoline complex: Efficient and recyclable nanocatalyst for one‐pot synthesis of benzimidazolquinoline derivatives and 2H‐indazoles

The synthesis, characterization and catalytic activity of a Cu(II) complex derived from 2‐oxoquinoline‐3‐carbaldehyde Schiff base supported on amino‐functionalized silica are reported. 3‐(1H‐Benzo[d]imidazol‐2‐yl)quinolines containing piperidine, morpholine and phenylpiperazine skeletons at the C‐2 position were formed in good to excellent yields via the one‐pot reaction of 2‐chloroquinoline‐3‐carbaldehyde, benzene‐1,2‐diamines and secondary amines in the presence of the nanocatalyst under mild conditions. Moreover, the nanocatalyst was found to be recyclable for up to seven runs without significant loss of activity. Also, a series of 2H‐indazoles were synthesized by the catalytic condensation of 2‐bromobenzaldehyde, sodium azide and primary amines.     

Design and characterization of Dendrimer of MNPs as a novel,heterogeneous and reusable nanomagnetic organometallic catalyst for one‐pot synthesis of hydroxyl naphthalene‐1,4‐dione derivatives under solvent‐free conditions

A novel super acidic magnetic nanoparticle as catalyst was successfully synthesized. The preparation of this dendrimer sulfonic acid functionalized γ‐Fe₂O₃ magnetic core‐shell silica nanoparticles as a new recoverable and heterogeneous nanocatalyst was described. The new catalyst was characterized using various techniques such as scanning electron microscopy (SEM), energy dispersive spectrum (EDS), and thermo gravimetric synthesis (TGA). Moreover, we have examined the catalytic activity of the catalyst for one‐pot, efficient and facile synthesis of 2‐hydroxy‐1,4‐naphthoquinone derivatives via a three‐component condensation reaction of 2‐hydroxynaphthalene‐1,4‐dione, aromatic aldehydes and aniline derivatives. High yields of products, short reaction times, waste‐free, mild, ambient and solvent‐free reaction conditions are advantages of this protocol. Also, the catalyst can be easily recovered by an external magnetic and reused several times without significant loss of its catalytic activity.     

Synthesis and characterization of Co (III) salen complex immobilized on cobalt ferrite‐silica nanoparticle and their application in the synthesis of spirooxindoles

The preparation, characterization and catalytic application of Co (III) salen complex loaded on cobalt ferrite‐silica nanoparticle [CoFe₂O₄@SiO₂@ Co (III) salen complex] are described. Co (III) salen complex loaded on ferrite cobalt‐silica nanoparticles is characterized by transmission electron microscopy, scanning electron microscopy coupled with energy‐dispersive X‐ray, vibrating‐sample magnetometer and Fourier transform‐infrared analyses. The thermal stability of the material is also determined by thermal gravimetric analysis. An average crystallite size is determined from the full‐width at half‐maximum of the strongest reflection by using Scherrer's approximation by powder X‐ray diffractometry. The efficiency of CoFe₂O₄@SiO₂@Co (III) salen complex is investigated in the synthesis of spirooxindoles of malononitrile, various isatins with 1,3‐dicarbonyles. The nanocatalyst demonstrated excellent catalytic activity that gave the corresponding coupling products in good to excellent yields. Moreover, the recoverability and reusability of CoFe₂O₄@SiO₂@Co (III) salen complex is investigated where nanocatalyst could be recovered and reused at least five times without any appreciable decrease in activity and selectivity, which confirmed its high efficiency and high stability under the reaction conditions and during recycling stages.     

CoFe2O4@SiO2‐CPTES‐Guanidine‐Cu(II): A novel and reusable nanocatalyst for the synthesis of 2,3‐dihydroquinazolin‐4(1H)‐ones and polyhydroquinolines and oxidation of sulfides

CoFe₂O₄@SiO₂‐CPTES‐Guanidine‐Cu(II) magnetic nanoparticles were synthesized and used as a new, inexpensive and efficient heterogeneous catalyst for the synthesis of polyhydroquinolines and 2,3‐dihydroquinazoline‐4(1H)‐ones and for the oxidation of sulfides. The structure of this nanocatalyst was characterized using Fourier transform infrared spectroscopy, scanning electron microscopy, energy‐dispersive X‐ray spectroscopy, vibrating sample magnetometry, thermogravimetric analysis, X‐ray diffraction and inductively coupled plasma optical emission spectrometry. Simple preparation, high catalytic activity, simple operation, high yields, use of green solvents, easy magnetic separation and reusability of the catalyst are some of the advantages of this protocol.     

One‐pot four component condensation for the synthesis of novel dispirooxindole pyrrolidine linked 1,2,3‐triazoles via stereo‐ and regioselective [3 + 2] cycloaddition reaction in PEG‐400

A one‐pot four component condensation of isatin, sarcosine, 2‐[2‐oxo‐1‐(prop‐2‐ynyl)indolin‐3‐ylidene]malononitrile and aryl azides has been reported for the synthesis of novel dispirooxindole pyrrolidine linked 1,2,3‐triazole conjugates using Cu(I) as a catalyst in PEG‐400 by stereoselective [3 + 2] azide‐alkyne cycloaddition followed by [3 + 2] azomethine ylide and alkene cycloaddition. Structures have been confirmed by spectral and X‐ray studies. Crystal packing of 5a has also been reported. Rapid reaction, easy work‐up and high yields are the salient features of the present protocol.