Sulfur-linked cyanobiphenyl-based liquid crystal dimers and the twist-bend nematic phase

ABSTRACT

The synthesis and characterisation of two series of cyanobiphenyl-based liquid crystal dimers containing sulfur links between the spacer and mesogenic units, the 4?-[1,ω-alkanediylbis(thio)]bis-[1,1?-biphenyl]-4-carbonitriles (CBSnSCB), and 4?-({ω-[(4?-cyano[1,1?-biphenyl]-4-yl)oxy]alkyl}thio)[1,1?-biphenyl]-4-carbonitriles (CBSnOCB) are described. The odd members of both series show twist-bend nematic and nematic phases, whereas the even members exhibit only the nematic phase. An analogous cyanoterphenyl-based dimer, 3⁴-{6-[(4?-cyano[1,1?-biphenyl]-4-yl)thio]-hexyl}[1¹,2¹:2⁴,3¹-terphenyl]-1⁴-carbonitrile (CT6SCB), is also reported and shows enantiotropic N_TB and N phases. The transitional properties of these dimers are discussed in terms of molecular curvature, flexibility and biaxiality. The same molecular factors also influence the birefringence of nematic phases. Resonant X-ray scattering studies of the twist-bend nematic phase at both the carbon and sulfur absorption edges were performed, which allowed for the determination of critical behaviour of the helical pitch at the transition to the nematic phase, the behaviour was found to be independent of molecular structure. It was also observed that despite the different molecular bending angle and flexibility, in all compounds the helical pitch length far from the N-N_TB transition corresponds to 4 longitudinal molecular distances.     

Metallomesogens based on platinum(II) complexes: synthesis, luminescence and polarized emission

Two series of heteroleptic cyclometalated platinum(II) complexes [(C(n)Oppy)Pt(acac) and (C(n)OFppy)Pt(acac)] have been prepared. Their liquid-crystal and optophysical properties were studied, in which C(n)Oppy is 2-(4-alkoxyphenyl)-5-(alkoxymethyl)pyridine and C(n)OFppy is 2-(3-fluoro-4-alkoxyphenyl)-5-(alkoxymethyl)pyridine. Only the heteroleptic cyclometalated platinum(II) complexes (n = 12 and 16) exhibited enantiotropic mesophase transitions with smectic (S(m)) structure. Intense polarized luminescence with a maximum peak at 532 nm and a polarization ratio as high as 10.5 were obtained in an aligned polyimide film under opto-excitation at room temperature. This research work provides a simple approach to realize high-efficiency polarized emission by heteroleptic cyclometalated platinum(II) complexes.     

Die Ammonolyse von Halogenokomplexen des vierwertigen Platins

Ammonolysis of Halogeno Complexes of Tetravalent Platinum Reactions of liquid ammonia and ammonium hexahalogenoplatinates(IV) at ?40°C yield mixtures of halogenoammine complexes [Pt(NH₃)_6?nX_n]X_4?n (X = Cl, Br, I; n = 3, 2, 1, 0). Hexaammine platinum(IV) salts, [Pt(NH₃)₆]X₄, may be isolated as main product only after several weeks of reaction. Interactions at room temperature of liquid ammonia and hexachloro or hexabromo complexes produce quantitatively the novel dinuclear di-m?-amido-bis[tetraammineplatinum(IV)] complex, [(H₃N)₄Pt(NH₂)₂Pt(NH₃)₄]X₆. By interaction of gaseous or liquid ammonia and subsequent addition of potassium amide solution in excess potassium hexaamido platinate(IV), K₂[Pt(NH₂)₆], is formed in good yield.     

White emission from dinuclear cyclometalated platinum(II) complex in single-emitting layer PLEDs

A dinuclear platinum(II) complex of (dfppy)₂Pt₂(dipic) has been prepared, where dfppy is 2,4-difluorophenylpyridine and dipic is a biphenyl-bridged bi-picolinic acid derivative. Its physical and optoelectronic properties, as well as molecular orbitals calculation have been investigated and compared with those of its mono-nuclear (dfppy)Pt(pic) complex. Both platinum(II) complexes exhibited almost identical photoluminescence (PL) spectra with deep blue emission in dilute dichloro-methane (10⁻⁵ M) and different PL spectra with red emission in their neat films. Stable white emissions were obtained in the (dfppy)₂Pt₂(dipic)-doped polymer light-emitting devices using a blend of poly(vinylcarbazole) and 2-(4-biphenyl)-5-(4-tert-butyl-phenyl)-1,3,4-oxadiazole as a host matrix at dopant concentrations from 1 wt % to 10 wt %. In contrast, the (dfppy)Pt(pic)-doped devices exhibited orange-red emissions in the same device configuration. It indicates that dinuclear platinum(II) complex with a non-planar structure is an effective way to control formation excimers of platinum(II) complex and get white-emitting PLEDs with single dopant.     

Ab Initio Calculations of Hydroxoplatinum Compounds: II. Binuclear Platinum(IV) Superoxo Complexes

The structural and spectral data have been obtained by ab initio methods for the [(OH)₄Pt(μ-O₂)(μ- OH)Pt(OH)₄]^2?, [(OH)₄Pt(μ-O₂)(μ-OH)Pt(OH)₄(OH)]^3?, [(OH)₅Pt(μ-O₂)Pt(OH)₅]^3?, and [(H₂O)(OH)₄Pt(μ- O₂)Pt(OH)₄(H₂O)]- clusters, corresponding to binuclear platinum(IV) superoxo complexes with one and two bridges. The data obtained are in good agreement with experimental data and make it possible to judge the structure of available complexes.     

π-Allylmetal chemistry: III. A facile cleavage of allyl groups from quaternary nitrogen by platinum(0) complexes

Reactions of Pt(PPh₃)₂L (I, L = PPh₃; II, L = C₂H₄) with [(CH₂CRCH₂)NH_nEt_{3? n}]X (R = H, n = 0, 1; R = Me, n = 0; X = Cl0₄, BPh₄) in acetone or methylene chloride readily afford the corresponding π-allylplatinum(II) complexes, [Pt(π-C₃H₄R)(PPh₃)₂] X and NH_n Et_{3? n} in good yields. The reactivity patterns in the rapid formation of the π-allyl complexes from II and [(allyl)NH₃]Cl0₄ (allyl = CH₂CHCH₂, CH₂CHCHMe, CH₂CMeCH₂, trans-MeCHCHCH₂) are compared with those in the synthetically equivalent conversion of allylamines to the π-allyl complexes induced by platinum(II) hydrido complexes.     

Mechanistic Studies on the Gas‐Phase Dehydrogenation of Alkanes at Cyclometalated Platinum Complexes

In the ion/molecule reactions of the cyclometalated platinum complexes [Pt(L? H)]⁺ (L=2,2′‐bipyridine (bipy), 2‐phenylpyridine (phpy), and 7,8‐benzoquinoline (bq)) with linear and branched alkanes C_nH_2n+2 (n=2–4), the main reaction channels correspond to the eliminations of dihydrogen and the respective alkenes in varying ratios. For all three couples [Pt(L? H)]⁺/C₂H₆, loss of C₂H₄ dominates clearly over H₂ elimination; however, the mechanisms significantly differs for the reactions of the “rollover”‐cyclometalated bipy complex and the classically cyclometalated phpy and bq complexes. While double hydrogen‐atom transfer from C₂H₆ to [Pt(bipy? H)]⁺, followed by ring rotation, gives rise to the formation of [Pt(H)(bipy)]⁺, for the phpy and bq complexes [Pt(L? H)]⁺, the cyclometalated motif is conserved; rather, according to DFT calculations, formation of [Pt(L? H)(H₂)]⁺ as the ionic product accounts for C₂H₄ liberation. In the latter process, [Pt(L? H)(H₂)(C₂H₄)]⁺ (that carries H₂ trans to the nitrogen atom of the heterocyclic ligand) serves, according to DFT calculation, as a precursor from which, due to the electronic peculiarities of the cyclometalated ligand, C₂H₄ rather than H₂ is ejected. For both product‐ion types, [Pt(H)(bipy)]⁺ and [Pt(L? H)(H₂)]⁺ (L=phpy, bq), H₂ loss to close a catalytic dehydrogenation cycle is feasible. In the reactions of [Pt(bipy? H)]⁺ with the higher alkanes C_nH_2n+2 (n=3, 4), H₂ elimination dominates over alkene formation; most probably, this observation is a consequence of the generation of allyl complexes, such as [Pt(C₃H₅)(bipy)]⁺. In the reactions of [Pt(L? H)]⁺ (L=phpy, bq) with propane and n‐butane, the losses of the alkenes and dihydrogen are of comparable intensities. While in the reactions of “rollover”‐cyclometalated [Pt(bipy? H)]⁺ with C_nH_2n+2 (n=2–4) less than 15 % of the generated product ions are formed by C? C bond‐cleavage processes, this value is about 60 % for the reaction with neo‐pentane. The result that C? C bond cleavage gains in importance for this substrate is a consequence of the fact that 1,2‐elimination of two hydrogen atoms is no option; this observation may suggest that in the reactions with the smaller alkanes, 1,1‐ and 1,3‐elimination pathways are only of minor importance.     

Nanostructured polymetallaynes of controlled length: Synthesis and characterization of oligomers and polymers from 1,1′‐bis‐(ethynyl)4,4′‐biphenyl bridging Pt(II) or Pd(II) centers

The reactivity of square planar palladium(II) and platinum(II) complexes in trans or cis configuration, namely trans or cis‐[dichlorobis(tributylphosphine)platinum(II)] and trans‐[dichlorobis(tributylphosphine)palladium(II)] with 1,1′‐bis(ethynyl) 4,4′‐biphenyl, DEBP, leading to π‐conjugated organometallic oligomeric and polymeric metallaynes, was investigated by a systematic variation of the reaction conditions. The formation of polymers and oligomers with defined chain length [? M(PBu₃)₂ (C?C? C₆H₄? C₆H₄? C?C? )]_n (n = 3–10 for the oligomers, n = 20–50 for the polymers) depends on the configuration of the precursor Pt(II) and Pd(II) complexes, the presence/absence of the catalyst CuI, and the reaction time. A series of model reactions monitored by XPS, GPC, and NMR ³¹P spectroscopy showed the route to modulate the chain growth. As expected, the nature of the transition metal (Pt or Pd) and the molecular weight of the polymers markedly influence the photophysical characteristics of the polymetallaynes, such as optical absorption and emission behavior. Polymetallaynes with nanostructured morphology could be obtained by a simple casting procedure of polymer solutions. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3311–3329, 2007     

New biimidazole and bibenzimidazole derivatives: mono and binuclear palladium(II) or platinum(II) complexes and heterobinuclear palladium(II)-rhodium(I) or platinum(II)-rhodium(I) complexes

Novel neutral biimidazolate or bibenzimidazolate palladium(II) and platinum(II) complexes of the type M(NN)₂(dpe) [M = Pd, Pt; (NN)₂^2? = BiIm^2?, BiBzIm^2?. dpe = 1,2-bis(diphenylphosphino) ethane] have been obtained by reacting MCl₂(dpe) with TI₂(NN)₂. Complexes M(NN)₂(dpe) which are Lewis bases react with HClO₄ or [M(dpe)(Me₂CO)₂](ClO₄)₂ to yield, respectively, mononuclear cationic complexes of general formula [M{H₂(NN)₂](dpe) (M = Pd, Pt; H₂(NN)₂ = H₂BiIm, H₂BiBzIm) and homobinuclear palladium(II) or platinum(II) cationic complexes of the type [M₂{μ - (NN)₂}(dpe)₂](ClO₄)₂. Reactions of M(BiBzIm)(dpe) with [Rh(COD) (Me₂CO)_X](ClO₄) render similar heterobinuclear palladium(II)-rhodium(I) and platinum(II)-rhodium(I) cationic complexes, of general formula [(dpe)M(μ-BiBzIm)Rh(COD)](ClO₄) (M = Pd, Pt; COD = 1,5-cyclooctadiene). Di- and mono-carbonyl derivatives [(dpe)M(μ-BiBzIm)Rh(CO)L](ClO₄) (M = Pd, Pt; L = CO, PPh₃) have also been prepared. The structures of the resulting complexes have been elucidated by conductance studies and IR spectroscopy.     

Synthesis of cross linked platinum metal containing polyyne polymers

Reaction of Pt(PⁿBu₃)₂Cl₂ (1) or Pt(AsⁿBu₃₂Cl₂ (2) with stoichiometric amounts of 1,3,5-triethynylbenzene, [1,3,5-(H? C?C? )₃C₆H₃] (3)yields monomeric, [1,3,5-Cl(PⁿBu₃)₂(Pt? C? C? )₃C₆H₃] (4), [1,3,5-(C1)(AsⁿBu₃)₂Pt? C? C? ₃C₆H₃] (5) or polymeric, {1,3,5-[(PⁿBu₃)₂Pt? C?C? ]₃C₆H₃? )ⁿ (6), {1,3,5-[(AsⁿBu₃)₂Pt? C? C? ]₃C₆H₃? }ⁿ (7) complexes. Treatment of (1) with (3) and 2,5-diethynyl-p-xylene,H? C? C? C₆H₂(CH₃)₂? C? C? H (8) in varying molar ratios yields a series of high molecular weight cross linked platinum metal containing polyyne copolymers.     

Synthesis and crystal structures of copper(II) and silver(I) complexes of a biphenyl-bridged bipyrazolyl ligand

A semirigid bipyrazolyl ligand, 4,4??-bis[(3??,5??-diethyl-1H-pyrazol-4??-yl)methylene)]-1,1??-biphenyl (H₂L), and four of its Ag(I) and Cu(II) complexes have been prepared and structurally characterized. X-ray analysis demonstrates that the Ag(I) complexes are dinuclear molecular rectangle, while the Cu(II) complexes display a twisted rectangular structure. Two different conformations, namely cis and trans, have been observed for this bipyrazolyl ligand.     

Efficient singlet oxygen generation by luminescent 2-(2′-thienyl)pyridyl cyclometalated platinum(II) complexes and their calixarene derivatives

Luminescent cyclometalated platinum(II) complexes, namely [Pt(Thpy)(PPh₃)X]ⁿ⁺ (HThpy = 2-(2′-thienyl)pyridine; X = Cl⁻ ( 1 ), n = 0; X = CH₃CN ( 2 ), pyridine ( 3 ), n = 1) and [Pt(Thpy)(HThpy)Y] ^{n +} (Y = Cl⁻ ( 4 ), n = 0; Y = pyridine ( 5 ), n = 1), exhibit structured emission with peak maximum at ∼556 and 598 nm in degassed acetonitrile and with emission quantum yield and lifetime of up to 0.38 and 26 μs, respectively. These complexes are efficient photosensitizers of singlet oxygen with yields up to >90%. Complex 5 exhibited photocytotoxicity towards cancer cells and fluorescence microscopic images of cells incubated with 5 reveal substantial uptake at the nucleus and mitochondria.     

Platinum(II) Metallomesogens: New External‐Stimuli‐Responsive Photoluminescence Materials

New dicatenar isoquinoline‐functionalized pyrazoles, [Hpz^R(n,n)iq] (R(n,n)=C₆H₃(OC_nH_2n+1)₂; n=4, 6, 8, 10, 12, 14, 16, 18), have been strategically designed and synthesized to induce mesomorphic and luminescence properties into the corresponding bis(isoquinolinylpyrazolate)platinum(II) complexes [Pt(pz^R(n,n)iq)₂]. Thermal studies reveal that all platinum(II) compounds exhibit columnar mesophases over an exceptionally wide temperature range, above 300 °C in most cases. The photophysical behavior was also investigated in solution and in the solid state. As a consequence of the formation of Pt???Pt interactions, the weak greenish emission of the platinum derivatives turns bright orange in the mesophase. Additionally, the complexes are sensitive to a great variety of external inputs, such as temperature, mechanical grinding, pressure, solvents, and vapors. On this basis, they are used as dopant agents of a polyvinylpyrrolidone or poly(methyl methacrylate) polymer matrix to achieve stimuli‐responsive thin films.     

Activation of Elemental Sulfur at a Two‐Coordinate Platinum(0) Center

Platinum dichalcogenides have been known to exhibit two‐dimensional layered structures. Herein, we describe the syntheses, isolation, and characterization of air‐stable crystalline cyclic alkyl(amino) carbene (cAAC)‐supported monomeric platinum disulfide three‐membered ring complex [(cAAC)₂Pt(S₂)] ( 2 ). The highly reactive platinum(0) [(cAAC)₂Pt] complex ( 1 ) with two‐coordinate platinum activates elemental sulfur to give 2 . The brown crystals of bis‐carbene platinum(II)monosulfate [(cAAC)₂Pt(SO₄)_x(S₂)_1?x] ( 4 ) have been isolated when the reaction was performed in air. The dioxygen analogue of 2 was formed upon exposing the THF solution of 1 to aerial oxygen (O₂). The binding of oxygen at the Pt⁰ center was found to be reversible. Additionally, DFT study has been performed to elucidate the electronic structure and bonding scenario of 2 , 3 , and 4 . Quantum chemical calculations showed donor–acceptor‐type interaction for the Pt?S bonds in 2 and Pt?O bonds in 3 and 4 .     

Synthesis of poly-yne polymer containing platinum and silicon atoms in the main chain by oxidative coupling and its reactions with transition-metal carbonyl complexes

The platinum poly-yne polymer, [? C?C? SiMe₂? C?C? Pt(PBu₃)₂? C?C? SiMe₂? C?C? ]_n (2), was synthesized by the oxidative coupling of a silicon–platinum monomer, trans-(PBu₃)₂Pt(C?C? SiMe₂–C?CH)₂ (1). The reaction of platinum poly-yne polymer 2 with dicobaltoctacarbonyl gave μ-coordinated complexes, {[? C?C? SiMe₂? C?C? Pt(PBu₃)₂? C?C? SiMe₂? C?C? ] [Co₂(Co)₆]₂}_n (4). the electric conductivity of iodine adducts of the polymer complexes 4 was 3.0×10^?5 S cm^?1. As an aid to spectroscopic characterization of the polymer complex 4, a model complex, {trans-[(PBu₃)₂Pt? (C?C? SiMe₂? C?CH)₂]} {[Co₂(CO)₆]₂} (3), was also prepared by the reaction of 1 with dicobaltocatacarbonyl. Selective coordination of Co₂(CO)₆ groups to ? SiMe₂? C?C C?C? Si(Me)₂? Moieties and coordinative inertness of the Pt? C?C? moieties were confirmed by comparison of the NMR spectra of 3 with those of 4. All new compounds have been characterized by analytical and spectral analysis (IR, ¹H NMR).     

含三芳胺基的单环金属铂配合物的合成及其光物理与电化学性质

通过Ullmann反应和环金属化反应合成了两种新型含三芳胺基的单环金属铂配合物: [N,N-二(4-叔丁基苯基)-4-(2'-吡啶基)苯胺-C3, N1](二苯甲酰基甲烷)合铂(Ⅱ)[(BuPhNPPy)Pt(DBM)]和[N,N-二苯基-4-(2'-吡啶基)苯胺-C3, N1](二苯甲酰基甲烷)合铂(Ⅱ) [(PhNPPy)Pt(DBM)], 探讨了分子结构和反应条件对合成反应的影响, 环金属化反应的产率达到87.0%. 研究了单环铂配合物的紫外-可见光谱、光致发光和电化学性质. 研究结果表明, (PhNPPy)Pt(DBM)和(BuPhNPPy)Pt(DBM)的氧化-还原电位分别为0.80, -1.63 V和0.93, -1.45 V; 它们都具有很强的紫外吸收和光致发光性能, 其中(PhNPPy)Pt(DBM)的最大紫外吸收峰为346 nm, 最大荧光波长为537 nm, (BuPhNPPy) Pt(DBM)的最大紫外吸收和荧光波长相应红移7~13 nm.     

Unprecedented 1D Mixed-metal Polynuclear Cyclometalated Platinum Complexes： Synthesis, Structural Characterization and Spectroscopic Properties

The complexes [Pt2L2（μ-dppm）]（ClO4）2 （1） and {[Pt2L2（μ-dppm）Li（CH3CN）2]（ClO4）3}n （2）, where HL is 6-[4-（diethoxyphosphorylmethyl）phenyl]-2,2′-bipyridinyl and dppm is bis（diphenylphosphino）methane, have been synthesized and characterized. In complex 1 the platinum（Ⅱ） center adopts a distorted square planar coordination geometry. The polymer 2 exhibits a ＂stairstep＂ configuration with one-dimensional Pt（Ⅱ）N^N^CPO- Li（Ⅰ）-OPC^N^ NPt（Ⅱ） mixed-metal units which are linked through dppm. Both complexes have metal-metal interaction with Pt- Pt distances of 3.325（2） and 3.1432（9） A, respectively, and display strong metal-metal-to-ligand charge-transfer （MMLCT） triplet state emission. The density-functional-theory calculation was used to interpret the absorption spectra of the complexes.     

Photophysical and electrochemical properties of platinum(II) complexes bearing a chromophore-acceptor dyad and their photocatalytic hydrogen evolution

A series of platinum(II) complexes bearing a chromophore-acceptor dyad obtained by reacting 4-(p-bromomethylphenyl)-6-phenyl-2,2'-bipyridine or 4'-(p-bromomethylphenyl)-2,2':6',2'-terpyridine with pyridine, 4-phenylpyridine, 4,4'-bipyridine, 1-methyl-4-(pyridin-4'-yl)pyridinium hexafluorophosphate respectively, were synthesized. Their photophysical properties, emission quenching studies by Pt nanoparticles and methyl viologen, electrochemical properties and photoinduced electron-transfer reactions in a photocatalytic hydrogen-generating system containing triethanolamine and colloidal Pt without an extra electron relay, were investigated. A comparison of the rates of hydrogen production for the two photocatalytic systems, one containing a metal-organic dyad and the other comprising a 1:1 mixture of the parental platinum(II) complexes and the corresponding electron relay, showed that intramolecular electron transfer improves the photocatalytic efficiency. Compared with cyclometalated platinum(II) complexes, the related platinum(II) terpyridyl complexes exhibited poor performance for photocatalytic hydrogen evolution. An investigation into the amount of hydrogen generated by three platinum(II) complexes containing cyclometalated ligands with methyl groups located on different phenyl rings revealed that the efficiency of hydrogen evolution was affected by a subtle change of functional group on ligand, and the hydrogen-generating efficiency in the presence or absence of methyl viologen is comparable, indicating electron transfer from the excited [Pt(C^N^N)] chromophore to colloidal Pt. (1)H NMR spectroscopy of the metal-organic dyads in an aqueous solution in the presence of excess triethanolamine revealed that the dyad with a viologen unit was unstable, and a chemical reaction in the compound occurred prior to irradiation by visible light under basic conditions.     

Novel platinum(II) and (IV) complexes of naphthaldimine schiff bases

Naphthaldimines containing N₂O₂ donor centers react with platinum(II) and (IV) chlorides to give two types of complexes depending on the valence of the platinum ion. For [Pt(II)], the ligand is neutral, [(H₂L¹)PtCl₂]·3H₂O (1) and [(H₂L³)₂Pt₂Cl₄]·5H₂O (3), or monobasic [(HL²)₂Pt₂Cl₂]·2H₂O (2) and [(HL⁴)₂Pt]·2H₂O (4). These complexes are all diamagnetic having square-planar geometry. For [Pt(IV)], the ligand is dibasic, [(L¹)Pt₂Cl₄(OH)₂]·2H₂O (5), [(L²)Pt₃Cl₁₀]·3H₂O (6), [(L³)Pt₂Cl₄(OH)₂]·C₂H₅OH (7) and [(L⁴)Pt₂Cl₆]·H₂O (8). The Pt(IV) complexes are diamagnetic and exhibit octahedral configuration around the platinum ion. The complexes were characterized by elemental analysis, UV-Vis and IR spectra, electrical conductivity and thermal analyses (DTA and TGA). The molar conductances in DMF solutions indicate that the complexes are non-ionic. The complexes were tested for their catalytic activities towards cathodic reduction of oxygen.     

Luminescent organoplatinum(II) complexes with functionalized cyclometalated C^N^C ligands: structures, photophysical properties, and material applications

A series of [(R'-C^N^C-R')Pt(L)] complexes with doubly deprotonated cyclometalated R'-C^N^C-R' ligands (R'-C^N^C-R'=2,6-diphenylpyridine derivatives) functionalized with carbazole, fluorene, or thiophene unit(s) have been synthesized and their photophysical properties studied. The X-ray crystal structures reveal extensive intermolecular π···π and C-H···π interactions between the cyclometalated C^N^C ligands. Compared to previously reported cyclometalated platinum(II) complexes [(C^N^C)Pt(L)], which are non-emissive in solution at room temperature, the carbazole-, fluorene- and thiophene-functionalized [(R'-C^N^C-R')Pt(L)] (L=DMSO 1-9, C≡N-Ar, 1a-9a) complexes are emissive in solution at room temperature with λ(max) at 564-619 nm and Φ=0.02-0.26. The emissions of the [(R'-C^N^C-R')Pt(L)] complexes are attributed to electronic excited states with mixed (3)MLCT and (3)IL character. The carbazole/fluorene/thiophene unit(s) allow the tuning of the electronic properties of the [(R'-C^N^C-R')Pt] moiety, with the emission maxima in a range of 564-619 nm. These are the first examples of organoplatinum(II) complexes bearing doubly deprotonated cyclometalated C^N^C ligands that are emissive in solution at room temperature. In non-degassed DMSO, the emission intensities of 6a-9a are enhanced upon exposure to ambient light. This phenomenon is caused by reacting photogenerated (1)O(2) with a DMSO molecule to form dimethyl sulfone, leading to the removal of dissolved oxygen in solution. Self-assembled nanowires and nanorods are obtained from precipitation of 3a in THF/H(2)O and 8a in DMSO/Et(2)O, respectively. The [(R'-C^N^C-R')Pt(L)] complexes are soluble in common organic solvents with a high thermal stability (>300 °C), rendering them as phosphorescent dopants for organic light-emitting diode (OLEDs) applications. Red OLEDs with CIE coordinates of (0.65±0.01, 0.35±0.01) were fabricated from 7a or 8a. A maximum external efficiency (η(Ext)) of 12.6% was obtained for the device using 8a as emitter.