An acetatopalladium(II) complex with 1‐benzyl‐N‐(3,5‐di‐tert‐butylsalicylidene)piperidin‐4‐amine: Synthesis,structure and catalytic applications in Suzuki–Miyaura coupling of arylboronic acids with hydroxyaryl halides

The Schiff base 1‐benzyl‐N ‐(3,5‐di‐tert ‐butylsalicylidene)piperidin‐4‐amine (HL) and its acetatopalladium(II) complex having the formula [Pd(L)(OAc)] were synthesized. Both HL and [Pd(L)(OAc)] were characterized using elemental analysis and various spectroscopic (infrared, UV–visible, ¹H NMR and ¹³C NMR) and mass spectrometric measurements. The molecular structure of the complex was determined using X‐ray crystallographic analysis. In the complex, the pincer‐like NNO‐donor L⁻ and the monodenate OAc⁻ provide a distorted square‐planar N₂O₂ coordination environment around the metal centre. The physicochemical properties and the spectroscopic features of [Pd(L)(OAc)] are consistent with its molecular structure. The complex was found to be an effective catalyst for the Suzuki–Miyaura cross‐coupling reactions of hydroxyaryl halides with arylboronic acids in predominantly aqueous media. The reactions afforded hydroxybiaryl products in good to excellent yields with a wide substrate scope.     

Production and isolation of ligated metal(IV)‐oxo ions by tandem mass spectrometry

High valent metal(IV)‐oxo species, [M(?O)(MeIm)_n(OAc)]⁺ (M = Mn–Ni, MeIm = 1‐methylimidazole, n = 1–2), which are relevant to biology and oxidative catalysis, were produced and isolated in gas‐phase reactions of the metal(II) precursor ions [M(MeIm)_n(OAc)]⁺ (M = Mn–Zn, n = 1–3) with ozone. The precursor ions [M(MeIm)(OAc)]⁺ and [M(MeIm)₂(OAc)]⁺ were generated via collision‐induced dissociation of the corresponding [M(MeIm)₃(OAc)]⁺ ion. The dependence of ozone reactivity on metal and coordination number is discussed. Copyright © 2010 John Wiley & Sons, Ltd.     

Metal Trimethylsilylthiolates for the Synthesis of Trinuclear MnPd2 Complexes

The manganese(II)‐palladium(II)‐sulfide complex [MnCl₂(μ₃‐S)₂Pd₂(dppp)₂] ( 2 ) was prepared from the reaction of [PdCl₂(dppp)] with [Li(N,N'‐tmeda)]₂[Mn(SSiMe₃)₄] ( 2 ) in a 2:1 ratio under mild conditions. The new trimethylsilylthiolate complex [Pd(dppp)(SSiMe₃)₂] ( 3 ) was synthesized from the reaction of [Pd(dppp)(OAc)₂] with two equivalents of Li[SSiMe₃]; this was then used in a reaction with [Mn(CH₃CN)₂(OTf)₂] to form the manganese(II)‐palladium(II)‐sulfide cluster [Mn(OTf)(thf)₂(μ₃‐S)₂Pd₂(dppp)₂]OTf ( 4 ).     

Ligand‐Centred Reactivity of Bis(picolyl)amine Iridium: Sequential Deprotonation,Oxidation and Oxygenation of a “Non‐Innocent” Ligand

Treatment of [Ir(bpa)(cod)]⁺ complex [ 1 ]⁺ with a strong base (e.g., tBuO^?) led to unexpected double deprotonation to form the anionic [Ir(bpa?2H)(cod)]^? species [ 3 ]^?, via the mono‐deprotonated neutral amido complex [Ir(bpa?H)(cod)] as an isolable intermediate. A certain degree of aromaticity of the obtained metal–chelate ring may explain the favourable double deprotonation. The rhodium analogue [ 4 ]^? was prepared in situ. The new species [M(bpa?2H)(cod)]^? (M=Rh, Ir) are best described as two‐electron reduced analogues of the cationic imine complexes [M^I(cod)(Py‐CH₂‐N?CH‐Py)]⁺. One‐electron oxidation of [ 3 ]^? and [ 4 ]^? produced the ligand radical complexes [ 3 ]^. and [ 4 ]^.. Oxygenation of [ 3 ]^? with O₂ gave the neutral carboxamido complex [Ir(cod)(py‐CH₂‐N‐CO‐py)] via the ligand radical complex [ 3 ]^. as a detectable intermediate.     

Photodamage in a Mitochondrial Membrane Model Modulated by the Topology of Cationic and Anionic Meso‐Tetrakis Porphyrin Free Bases

The photodynamic effects of the cationic TMPyP (meso‐tetrakis [N‐methyl‐4‐pyridyl]porphyrin) and the anionic TPPS4 (meso‐tetrakis[4‐sulfonatophenyl]porphyrin) against PC/CL phosphatidylcholine/cardiolipin (85/15%) membranes were probed to address the influence of phorphyrin binding on lipid damage. Electronic absorption spectroscopy and zeta potential measurements demonstrated that only TMPyP binds to PC/CL large unilamellar vesicles (LUVs). The photodamage after irradiation with visible light was analyzed by dosages of lipid peroxides (LOOH) and thiobarbituric reactive substance and by a contrast phase image of the giant unilamellar vesicles (GUVs). Damage to LUVs and GUVs promoted by TMPyP and TPPS4 were qualitatively and quantitatively different. The cationic porphyrin promoted damage more extensive and faster. The increase in LOOH was higher in the presence of D₂O, and was impaired by sodium azide and sorbic acid. The effect of D₂O was higher for TPPS4 as the photosensitizer. The use of DCFH demonstrated that liposomes prevent the photobleaching of TMPyP. The results are consistent with a more stable TMPyP that generates long‐lived singlet oxygen preferentially partitioned in the bilayer. Conversely, TPPS4 generates singlet oxygen in the bulk whose lifetime is increased in D₂O. Therefore, the affinity of the porphyrin to the membrane modulates the rate, type and degree of lipid damage.     

The synthesis,crystal structure and magnetic properties of a one‐dimensional terbium(III)–octacyanidomolybdate(V) assembly

A one‐dimensional cyanide‐bridged coordination polymer, poly[[aquadi‐μ‐cyanido‐κ⁴C:N‐hexacyanido‐κ⁶C‐(dimethylformamide‐κO)bis(3,4,7,8‐tetramethyl‐1,10‐phenanthroline‐κ²N,N′)terbium(III)molybdate(V)] 4.5‐hydrate], [MoTb(CN)₈(C₁₆H₁₆N₂)₂(C₃H₇NO)(H₂O)]·4.5H₂O}_n, has been prepared and characterized through IR spectroscopy, elemental analysis and single‐crystal X‐ray diffraction. The compound consists of one‐dimensional chains in which cationic [Tb(tmphen)₂(DMF)(H₂O)]³⁺ (tmphen is 3,4,7,8‐tetramethyl‐1,10‐phenanthroline) and anionic [Mo^V(CN)₈]³⁻ units are linked in an alternating fashion through bridging cyanide ligands. Neighbouring chains are connected by three types of hydrogen bonds (O—H...O, O—H...N and C—H...O) and by π–π interactions to form a three‐dimensional supramolecular structure. In addition, magnetic investigations show that ferromagnetic interactions exist in the compound.     

Surfactant Hydrogels for the Dispersion of Carbon‐Nanotube‐Based Catalysts

Novel hydrogel phases based on positively charged and zwitterionic surfactants, namely, N‐[p‐(n‐dodecyloxybenzyl)]‐N,N,N‐trimethylammonium bromide (pDOTABr) and p‐dodecyloxybenzyldimethylamine oxide (pDOAO), which combine pristine carbon nanotubes (CNTs), were obtained, thus leading to stable dispersions and enhanced cross‐linked networks. The composite hydrogel featuring a well‐defined nanostructured morphology and an overall positively charged surface was shown to efficiently immobilise a polyanionic and redox‐active tetraruthenium‐substituted polyoxometalate (Ru₄POM) by complementary charge interactions. The resulting hybrid gel has been characterised by electron microscopy techniques, whereas the electrostatic‐directed assembly has been monitored by means of fluorescence spectroscopy and ζ‐potential tests. This protocol offers a straightforward supramolecular strategy for the design of novel aqueous‐based electrocatalytic soft materials, thereby improving the processability of CNTs while tuning their interfacial decoration with multiple catalytic domains. Electrochemical evidence confirms that the activity of the catalyst is preserved within the gel media.     

Semi‐interpenetrating polymer networks composed of poly(N‐isopropyl acrylamide) and polyacrylamide hydrogels

Three series of semi‐interpenetrating polymer networks, based on crosslinked poly(N‐isopropyl acrylamide) (PNIPA) and 1 wt % nonionic or ionic (cationic and anionic) linear polyacrylamide (PAAm), were synthesized to improve the mechanical properties of PNIPA gels. The effect of the incorporation of linear polymers into responsive networks on the temperature‐induced transition, swelling behavior, and mechanical properties was studied. Polymer networks with four different crosslinking densities were prepared with various molar ratios (25:1 to 100:1) of the monomer (N‐isopropyl acrylamide) to the crosslinker (methylenebisacrylamide). The hydrogels were characterized by the determination of the equilibrium degree of swelling at 25 °C, the compression modulus, and the effective crosslinking density, as well as the ultimate hydrogel properties, such as the tensile strength and elongation at break. The introduction of cationic and anionic linear hydrophilic PAAm into PNIPA networks increased the rate of swelling, whereas the presence of nonionic PAAm diminished it. Transition temperatures were significantly affected by both the crosslinking density and the presence of linear PAAm in the hydrogel networks. Although anionic PAAm had the greatest influence on increasing the transition temperature, the presence of nonionic PAAm caused the highest dimensional change. Semi‐interpenetrating polymer networks reinforced with cationic and nonionic PAAm exhibited higher tensile strengths and elongations at break than PNIPA hydrogels, whereas the presence of anionic PAAm caused a reduction in the mechanical properties. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 3987–3999, 2004     

Allylic Peroxidations with Bis(2‐pyridylimino)isoindolato‐Cobalt and ‐Iron Complexes

Several novel substituted bis(2‐pyridylimino)isoindolato (BPI) cobalt(II) and iron(II) complexes [M(BPI)(OAc)(H₂O)] (M = Co: 1 ‐ 6, Fe: 7) have been synthesized by reaction of bis(2‐pyridylimino)isoindole derivatives with the corresponding metal(II) acetates. Reaction of 1‐6 with 1.5 ‐ 2 molar equivalents of t‐BuOOH gave the corresponding alkylperoxocobalt(III) complexes [Co(BPI)(OAc)(OOtBu)] (10 ‐ 15). Using an aqueous solution of t‐BuOOH (70 %), cyclohexene was selectively catalytically oxidized to the dialkylperoxide cyclohex‐2‐ene‐1‐t‐butylperoxide.     

Cationic Heterocycles as Ligands: Synthesis and Reactivity with Anionic Nucleophiles of Cationic Triruthenium Clusters Containing C‐Metalated N‐Methylquinoxalinium or N‐Methylpyrazinium Ligands

The cationic cluster complexes [Ru₃(CO)₁₀(μ‐H)(μ‐κ²N,C‐L¹Me)]⁺ ( 3 ⁺; HL¹=quinoxaline) and [Ru₃(CO)₁₀(μ‐H)(μ‐κ²N,C‐L²Me)]⁺ ( 5 ⁺; HL²=pyrazine) have been prepared as triflate salts by treatment of their neutral precursors [Ru₃(CO)₁₀(μ‐H)(μ‐κ²N,C‐Lⁿ)] with methyl triflate. The cationic character of their heterocyclic ligands is responsible for their enhanced tendency to react with anionic nucleophiles relative to that of hydrido triruthenium carbonyl clusters that have neutral N‐heterocyclic ligands. These clusters react instantaneously with methyl lithium and potassium tris‐sec‐butylborohydride (K‐selectride) to give neutral products that contain novel nonaromatic N‐heterocyclic ligands. The following are the products that have been isolated: [Ru₃(CO)₉(μ‐H)(μ₃‐κ²N,C‐L¹Me₂)] ( 6 ; from 3 ⁺ and methyl lithium), [Ru₃(CO)₉(μ‐H)(μ₃‐κ²N,C‐L¹HMe)] ( 7 ; from 3 ⁺ and K‐selectride), [Ru₃(CO)₉(μ‐H)(μ₃‐κ²N,C‐L²Me₂)] ( 8 ; from 5 ⁺ and methyl lithium), and [Ru₃(CO)₉(μ‐H)(μ₃‐κ²N,C‐L²HMe)] ( 11 ; from 5 ⁺ and K‐selectride). Whereas the reactions of 3 ⁺ lead to products that arise from the attack of the corresponding nucleophile at the C atom of the only CH group adjacent to the N‐methyl group, the reactions of 5 ⁺ give mixtures of two products that arise from the attack of the nucleophile at one of the C atoms located on either side of the N‐methyl group. The LUMOs and the atomic charges of 3 ⁺ and 5 ⁺ confirm that the reactions of these clusters with anionic nucleophiles are orbital‐controlled rather than charge‐controlled processes. The N‐heterocyclic ligands of all of these neutral products are attached to the metal atoms in nonconventional face‐capping modes. Those of compounds 6 – 8 have the atoms of a ligand C?N fragment σ‐bonded to two Ru atoms and π‐bonded to the other Ru atom, whereas the ligand of compound 11 has a C? N fragment attached to a Ru atom through the N atom and to the remaining two Ru atoms through the C atom. A variable‐temperature ¹H NMR spectroscopic study showed that the ligand of compound 7 is involved in a fluxional process at temperatures above ?93 °C, the mechanism of which has been satisfactorily modeled with the help of DFT calculations and involves the interconversion of the two enantiomers of this cluster through a conformational change of the ligand CH₂ group, which moves from one side of the plane of the heterocyclic ligand to the other, and a 180° rotation of the entire organic ligand over a face of the metal triangle.     

Providing Support in Favor of the Existence of a PdII/PdIV Catalytic Cycle in a Heck‐Type Reaction

The complex [Pd(O,N,C‐L)(OAc)], in which L is a monoanionic pincer ligand derived from 2,6‐diacetylpyridine, reacts with 2‐iodobenzoic acid at room temperature to afford the very stable pair of Pd^IV complexes (OC‐6‐54)‐ and (OC‐6‐26)‐[Pd(O,N,C‐L)(O,C‐C₆H₄CO₂‐2)I] (1.5:1 molar ratio, at ?55 °C). These complexes and the Pd^II species [Pd(O,N,C‐L)(OX)] and [Pd(O,N,C‐L′)(NCMe)]ClO₄, (X=MeC(O) or ClO₃, L′=another monoanionic pincer ligand derived from 2,6‐diacetylpyridine), are precatalysts for the arylation of CH₂?CHR (R?CO₂Me, CO₂Et, Ph) using IC₆H₄CO₂H‐2 and AgClO₄. These catalytic reactions have been studied and a tentative mechanism is proposed. The presence of two Pd^IV complexes was detected by ESI(+)‐MS during the catalytic process. All the data obtained strongly support a Pd^II/Pd^IV catalytic cycle.     

Mononuclear Formamidinate Complexes of Lithium and Sodium

Treatment of N,N′‐bis(aryl)formamidines (FXylH = N,N′‐bis(2,6‐dimethylphenyl)formamidine, FEtH = N,N′‐bis(2,6‐diethylphenyl)formamidine, FisoH = N,N′‐bis(2,6‐diisopropylphenyl)formamidine) with nBuLi in the presence of tmeda (= N,N,N′,N′‐tetramethylethylenediamine) led to deprotonation of the amidine affording [Li(FXyl)(tmeda)] ( 1 ), [Li(FEt)(tmeda)] ( 2 ) and [Li(Fiso)(tmeda)] ( 3 ) respectively. Similar treatment of FXylH and FisoH with [Na{N(SiMe₃)₂}] in THF and pmdeta (= N,N,N′,N″,N″‐pentamethyldiethylenetriamine) yielded [Na(FXyl)(pmdeta)] ( 4 ) and [Na(Fiso)(pmdeta)] ( 5 ). All complexes were characterised by spectroscopy (NMR and IR) and X‐ray crystallography. Due to the bulkiness of the formamidinate ligands and the multidentate nature of the supporting neutral amine ligands (tmeda and pmdeta), all compounds were mononuclear with η²‐chelating formamidinate ligands in the solid state.     

A threefold interpenetrated two‐dimensional zinc(II) supramolecular architecture based on 3‐nitrobenzoic acid and 4,4′‐bipyridine

With regard to crystal engineering, building block or modular assembly methodologies have shown great success in the design and construction of metal–organic coordination polymers. The critical factor for the construction of coordination polymers is the rational choice of the organic building blocks and the metal centre. The reaction of Zn(OAc)₂·2H₂O (OAc is acetate) with 3‐nitrobenzoic acid (HNBA) and 4,4′‐bipyridine (4,4′‐bipy) under hydrothermal conditions produced a two‐dimensional zinc(II) supramolecular architecture, catena‐poly[[bis(3‐nitrobenzoato‐κ²O,O′)zinc(II)]‐μ‐4,4′‐bipyridine‐κ²N:N′], [Zn(C₇H₄NO₄)₂(C₁₀H₈N₂)]_n or [Zn(NBA)₂(4,4′‐bipy)]_n, which was characterized by elemental analysis, IR spectroscopy, thermogravimetric analysis and single‐crystal X‐ray diffraction analysis. The Zn^II ions are connected by the 4,4′‐bipy ligands to form a one‐dimensional zigzag chain and the chains are decorated with anionic NBA ligands which interact further through aromatic π–π stacking interactions, expanding the structure into a threefold interpenetrated two‐dimensional supramolecular architecture. The solid‐state fluorescence analysis indicates a slight blue shift compared with pure 4,4′‐bipyridine and HNBA.     

Structural Characterization of a Series of N5-Ligated MnIV-Oxo Species

Analysis of extended X-ray absorption fine structure (EXAFS) data for the Mn^IV-oxo complexes [Mn^IV(O)(^DMMN4py)]²⁺, [Mn^IV(O)(2pyN2B)]²⁺, and [Mn^IV(O)(2pyN2Q)]²⁺ (^DMMN4py=N,N-bis(4-methoxy-3,5-dimethyl-2-pyridylmethyl)-N-bis(2-pyridyl)methylamine; 2pyN2B=(N-bis(1-methyl-2-benzimidazolyl)methyl-N-(bis-2-pyridylmethyl)amine, and 2pyN2Q=N,N-bis(2-pyridyl)-N,N-bis(2-quinolylmethyl)methanamine) afforded Mn=O and Mn−N bond lengths. The Mn=O distances for [Mn^IV(O)(^DMMN4py)]²⁺ and [Mn^IV(O)(2pyN2B)]²⁺ are 1.72 and 1.70 Å, respectively. In contrast, the Mn=O distance for [Mn^IV(O)(2pyN2Q)]²⁺ was significantly longer (1.76 Å). We attribute this long distance to sample heterogeneity, which is reasonable given the reduced stability of [Mn^IV(O)(2pyN2Q)]²⁺. The Mn=O distances for [Mn^IV(O)(^DMMN4py)]²⁺ and [Mn^IV(O)(2pyN2B)]²⁺ could only be well-reproduced using DFT-derived models that included strong hydrogen-bonds between second-sphere solvent 2,2,2-trifluoroethanol molecules and the oxo ligand. These results suggest an important role for the 2,2,2-trifluoroethanol solvent in stabilizing Mn^IV-oxo adducts. The DFT methods were extended to investigate the structure of the putative [Mn^IV(O)(N4py)]²⁺⋅(HOTf)₂ adduct. These computations suggest that a Mn^IV-hydroxo species is most consistent with the available experimental data.     

Coordination of ZnII,CdII, and HgII by 2‐Pyridineformamide‐3‐piperidyl‐thiosemicarbazone

Sodium in dry methanol reduces 2‐cyanopyridine in the presence of 3‐piperidylthiosemicarbazide and produces 2‐pyridine‐formamide‐3‐piperidylthiosemicarbazone, HAmpip. Complexes with zinc(II), cadmium(II), and mercury(II) have been prepared and characterized by elemental analyses and spectroscopic techniques. In addition, the crystal structures of [Zn(Ampip)₂], [Zn(Ampip)(Oac)]₂, [Cd(HAmpip)Cl₂]·(CH₃)₂SO, [Cd(HAm‐pip)Br₂] · (CH₃)₂SO, [Cd(HAmpip)I₂]·(CH₃)₂SO, [Cd(Ampip)₂] and [Hg(HAmpip)Br₂]·(CH₃)₂SO have been solved. Coordination of the anionic and neutral thiosemicarbazone ligand is via the pyridyl nitrogen, imine nitrogen and thiolato/thione sulfur atom, respectively. In [Zn(Ampip)(OAc)]₂ one of the bridging acetato ligands has monodentate coordination and the other bridges in a bidentate manner. ¹¹³Cd NMR studies were carried out on the [Cd(HAmpip)X₂](X = Cl, Br or I) and [Cd(Ampip)(OAc)]₂ complexes. The ¹¹³Cd chemical shifts are affected by the halogen and range from 411 to 301 ppm, and the spectrum of [Cd(Ampip)(OAc)]₂ shows two signals at 450 and 251 ppm. The ¹⁹⁹Hg NMR spectrum of [Hg(HAmpip)Cl₂] also is discussed.     

Kinetics and mechanism of the homogeneous reaction between some manganese(III)-Schiff base complexes and hydrogen peroxide in aqueous and sodium dodecyl sulphate solutions

Summary The kinetics of the reaction between H₂O₂ and some Schiff base complexes of Mn^III have been investigated in both aqueous and micellar sodium dodecyl sulphate (SDS) solution. The reaction rate is first order in both H₂O₂ and [complex], and inversely proportional to [H⁺]. The second-order rate constant increases in the sequence [Mn(salophen)(OAc)] > [Mn(salen)(OH₂)]-ClO₄ > [Mn(salen)(OAc)]H₂O, where salen = N,N-bis-(salicylidene)ethylenediamine and salophen = N,N-bis-(salicylidene)-o-phenylenediamine. At SDS concentrations below the critical micellar concentration, there is almost no effect on the rate of reaction whereas at higher concentrations the reaction rate increases slightly. A mechanism involving Mn^II and a peroxo intermediate is proposed.     

Pd(OAc)2@SBA‐15/PrEn nanoreactor: a highly active,reusable and selective phosphine‐free catalyst for Suzuki–Miyaura cross‐coupling reaction in aqueous media

A series of ordered mesoporous organic–inorganic hybrid material was designed by using the amine‐functionalized SBA‐15 (PdX₂@SBA‐15/N_Y, Y = 1, 2) as solid support for palladium complexes. Among them, the Pd(OAc)₂/ethylenediamine complex encapsulated into SBA‐15 (Pd(OAc)₂@SBA‐15/PrEn or Pd(OAc)₂@SBA‐15/PrNHEtNH₂) exhibits higher activity and selectivity toward Suzuki cross‐coupling reaction under aerobic conditions and water solvent mixture. The SBA‐15/PrEn supported palladium pre‐catalyst could be separated easily from reaction products and used repetitively several times, showing its superiority over homogeneous catalysts for industrial and chemical applications. Copyright © 2013 John Wiley & Sons, Ltd.     

A Highly Versatile Catalyst System for the Cross‐Coupling of Aryl Chlorides and Amines

The syntheses of 2‐(di‐tert‐butylphosphino)‐N,N‐dimethylaniline ( L1 , 71 %) and 2‐(di‐1‐adamantylphosphino)‐N,N‐dimethylaniline ( L2 , 74 %), and their application in Buchwald–Hartwig amination, are reported. In combination with [Pd(allyl)Cl]₂ or [Pd(cinnamyl)Cl]₂, these structurally simple and air‐stable P,N ligands enable the cross‐coupling of aryl and heteroaryl chlorides, including those bearing as substituents enolizable ketones, ethers, esters, carboxylic acids, phenols, alcohols, olefins, amides, and halogens, to a diverse range of amine and related substrates that includes primary alkyl‐ and arylamines, cyclic and acyclic secondary amines, N? H imines, hydrazones, lithium amide, and ammonia. In many cases, the reactions can be performed at low catalyst loadings (0.5–0.02 mol % Pd) with excellent functional group tolerance and chemoselectivity. Examples of cross‐coupling reactions involving 1,4‐bromochlorobenzene and iodobenzene are also reported. Under similar conditions, inferior catalytic performance was achieved when using Pd(OAc)₂, PdCl₂, [PdCl₂(cod)] (cod=1,5‐cyclooctadiene), [PdCl₂(MeCN)₂], or [Pd₂(dba)₃] (dba=dibenzylideneacetone) in combination with L1 or L2 , or by use of [Pd(allyl)Cl]₂ or [Pd(cinnamyl)Cl]₂ with variants of L1 and L2 bearing less basic or less sterically demanding substituents on phosphorus or lacking an ortho‐dimethylamino fragment. Given current limitations associated with established ligand classes with regard to maintaining high activity across the diverse possible range of C? N coupling applications, L1 and L2 represent unusually versatile ligand systems for the cross‐coupling of aryl chlorides and amines.     

Diagonally Related s‐ and p‐Block Metals Join Forces: Synthesis and Characterization of Complexes with Covalent Beryllium–Aluminum Bonds

Additions of beryllium–halide bonds in the simple beryllium dihalide adducts, [BeX₂(tmeda)] (X=Br or I, tmeda=N,N,N′,N′‐tetramethylethylenediamine), across the metal center of a neutral aluminum(I) heterocycle, [:Al(^DipNacnac)] (^DipNacnac=[(DipNCMe)₂CH]^?, Dip=2,6‐diisopropylphenyl), have yielded the first examples of compounds with beryllium–aluminum bonds, [(^DipNacnac)(X)Al‐Be(X)(tmeda)]. For sake of comparison, isostructural Mg–Al and Zn–Al analogues of these complexes, viz. [(^DipNacnac)(X)Al‐M(X)(tmeda)] (M=Mg or Zn, X=I or Br) have been prepared and structurally characterized. DFT calculations reveal all compounds to have high s‐character metal–metal bonds, the polarity of which is consistent with the electronegativities of the metals involved. Preliminary reactivity studies of [(^DipNacnac)(Br)Al‐Be(Br)(tmeda)] are reported.     

Solid,Solution, and Theoretical Approach of [Cu(CN‐acac)(dmeen)]+

The reaction of bis(3‐cyano‐2,4‐pentanedionato)copper(II), [Cu(NC‐acac)₂] with the nitrogenous base N,N‐dimethyl, N′‐ethyl‐1,2‐ethylenediamine (dmeen) in the presence of Cu(ClO₄)₂ · 6H₂O, afforded a new cationic mixed‐ligand chelate [Cu(CN‐acac)(dmeen)]⁺. Its structure was characterized spectroscopically (IR, UV/Vis, EPR) and verified by X‐ray diffraction studies as [Cu(CN‐acac)(dmeen)(H₂O)]ClO₄. The coordination of CN‐acac^– as bridging ligand leads to a polymeric helical chain, which extends in the crystallographic c axis. Density functional theory (DFT) calculations suggest that in the solid state the anion CN‐acac^– binding is envisaged through the nitrogen atom of the cyanido group, establishing an octahedral arrangement around copper, whereas in solution, the square‐planar arrangement is prevailed, in accordance with the EPR findings.