Preparation of porous g‐C3N4/Ag/Cu2O: a new composite with enhanced visible‐light photocatalytic activity

From previous reports, graphitic carbon nitride (g‐C₃N₄) can be used as a photocatalyst, although the low efficiency of solar energy utilization, small specific surface area and high recombination rate of photogenerated electron–hole pairs limit its practical application. For the purpose of increasing photocatalytic activity, especially under irradiation of visible light, we successfully synthesized a new composite, namely porous g‐C₃N₄/Ag/Cu₂O, through chemical adsorption of Ag‐doped Cu₂O on porous g‐C₃N₄, which has not been investigated carefully worldwide. The composition, morphology and optical properties of the composite were investigated through methods including X‐ray diffraction, energy‐dispersive X‐ray, Fourier transform infrared, UV–visible and photoluminescence spectroscopies and transmission electron microscopy. Using rhodamine B as organic pollutant to be degraded under the irradiation of visible light, different mass ratios of Ag/Cu₂O doped on porous g‐C₃N₄ led to enhanced photocatalytic performance of the composite compared to pure porous g‐C₃N₄. When the mass ratio of Ag/Cu₂O is 15%, porous g‐C₃N₄/Ag/Cu₂O exhibits a degradation rate 2.015 times higher than that of pure porous g‐C₃N₄. The reasons for this phenomenon may be attributed to the increased utilization efficiency of visible light, high‐speed separation of photogenerated electron–hole pairs, accelerated interfacial transfer process of electrons and increased surface area of the composite. Copyright © 2016 John Wiley & Sons, Ltd.     

Preparation and photocatalytic activity of cuprous oxides

Cuprous oxide (Cu₂O) nanoparticles and microcubes have been successfully fabricated by reduce of CuSO₄ using ascorbic acid at room temperature. The as-synthesized products were easily separation and purification, because there were no template or surfactant has been introduced. All of the samples were characterized by X-ray powder diffractometer (XRD), scanning electron microscopy (SEM), Fourier transform infrared spectrometer (FTIR) and ultraviolet and visible light spectrometer (UV–vis). The microscale Cu₂O samples exhibited a high catalytic activity on photodegradation of methyl orange by visible light. It was found that Cu₂O microcubes have higher photocatalytic activity and the photocatalytic degradation ratio of methyl orange reached to 98.1%.     

Ultrathin g‐C3N4 Nanosheets Coupled with AgIO3 as Highly Efficient Heterostructured Photocatalysts for Enhanced Visible‐Light Photocatalytic Activity

The photocatalytic activity of graphite‐like carbon nitride (g‐C₃N₄) could be enhanced by heterojunction strategies through increasing the charge‐separation efficiency. As a surface‐based process, the heterogeneous photocatalytic process would become more efficient if a larger contact region existed in the heterojunction interface. In this work, ultrathin g‐C₃N₄ nanosheets (g‐C₃N₄‐NS) with much larger specific surface areas are employed instead of bulk g‐C₃N₄ (g‐C₃N₄‐B) to prepare AgIO₃/g‐C₃N₄‐NS nanocomposite photocatalysts. By taking advantage of this feature, the as‐prepared composites exhibit remarkable performances for photocatalytic wastewater treatment under visible‐light irradiation. Notably, the optimum photocatalytic activity of AgIO₃/g‐C₃N₄‐NS composites is almost 80.59 and 55.09 times higher than that of pure g‐C₃N₄‐B towards the degradation of rhodamine B and methyl orange pollutants, respectively. Finally, the stability and possible photocatalytic mechanism of the AgIO₃/g‐C₃N₄‐NS system are also investigated.     

Construction of a 2D Graphene‐Like MoS2/C3N4 Heterojunction with Enhanced Visible‐Light Photocatalytic Activity and Photoelectrochemical Activity

A novel graphene‐like MoS₂/C₃N₄ (GL‐MoS₂/C₃N₄) composite photocatalyst has been synthesized by a facile ethylene glycol (EG)‐assisted solvothermal method. The structure and morphology of this GL‐MoS₂/C₃N₄ photocatalyst have been investigated by a wide range of characterization methods. The results showed that GL‐MoS₂ was uniformly distributed on the surface of GL‐C₃N₄ forming a heterostructure. The obtained composite exhibited strong absorbing ability in the ultraviolet (UV) and visible regions. When irradiated with visible light, the composite photocatalyst showed high activity superior to those of the respective individual components GL‐MoS₂ and GL‐C₃N₄ in the degradation of methyl orange. The enhanced photocatalytic activity of the composite may be attributed to the efficient separation of electron–hole pairs as a result of the matching band potentials between GL‐MoS₂ and GL‐C₃N₄. Furthermore, a photocatalytic mechanism for the composite material has been proposed, and the photocatalytic reaction kinetics has been measured. Moreover, GL‐MoS₂/C₃N₄ could serve as a novel sensor for trace amounts of Cu²⁺ since it exhibited good selectivity for Cu²⁺ detection in water.     

Highly Facet‐Dependent Photocatalytic Properties of Cu2O Crystals Established through the Formation of Au‐Decorated Cu2O Heterostructures

This work confirms the presence of a large facet‐dependent photocatalytic activity of Cu₂O crystals through sparse deposition of gold particles on Cu₂O cubes, octahedra, and rhombic dodecahedra. Au‐decorated Cu₂O rhombic dodecahedra and octahedra showed greatly enhanced photodegradation rates of methyl orange resulting from a better separation of the photogenerated electrons and holes, with the rhombic dodecahedra giving the best efficiency. Au–Cu₂O core–shell rhombic dodecahedra also displayed a better photocatalytic activity than pristine rhombic dodecahedra. However, Au‐deposited Cu₂O cubes, pristine cubes, and Au‐deposited small nanocubes bound by entirely {100} facets are all photocatalytically inactive. X‐ray photoelectron spectra (XPS) showed identical copper peak positions for these Au‐decorated crystals. Remarkably, electron paramagnetic resonance (EPR) measurements indicated a higher production of hydroxyl radicals for the photoirradiated Cu₂O rhombic dodecahedra than for the octahedra, but no radicals were produced from photoirradiated Cu₂O cubes. The Cu₂O {100} face may present a high energy barrier through its large band edge bending and/or electrostatic repulsion, preventing charge carriers from reaching to this surface. The conventional photocatalysis model fails in this case. The facet‐dependent photocatalytic differences should be observable in other semiconductor systems whenever a photoinduced charge‐transfer process occurs across an interface.     

Facilitating a high‐performance photocatalyst for Suzuki reaction: Palladium nanoparticles immobilized on reduced graphene oxide‐doped graphitic carbon nitride

We prepared a non‐covalently coupled hybrid of reduced graphene oxide (rGO)‐doped graphitic carbon nitride (g‐C₃N₄) by freezing‐assisted assembly and calcination. Fourier transform infrared, Raman and X‐ray photoelectron spectroscopies and transmission electron microscopy confirmed that rGO was incorporated into the bulk g‐C₃N₄, which was an ideal support for loading Pd nanoparticles. The Pd nanoparticles with an average size of 4.57 nm were uniformly dispersed on the rGO‐doped g‐C₃N₄ surface. The layered structure provided large contact area of g‐C₃N₄ with rGO, further accelerating the electron transfer rate and inhibiting electron–hole recombination. Consequently, compared with Pd/rGO/g‐C₃N₄ and Pd/g‐C₃N₄, the Pd/rGO‐doped g‐C₃N₄ showed a prominent catalytic activity for visible‐light‐driven photocatalytic Suzuki–Miyaura coupling at ambient temperature. The Pd/rGO‐doped g‐C₃N₄ exhibited very high stability after six consecutive cycles with minimal loss of catalytic activity.     

Copper(II) bromide,nitrate and perchlorate complexes with sterically demanding N‐(6‐methylpyridin‐2‐yl)acetamide ligands

Functionalized acid amides are widely used in biology, medicine, environmental chemistry and many other areas. Among them, pyridine‐substituted amides, in particular N‐(pyridin‐2‐yl)acetamide and its derivatives, play an important role due to their excellent chelating properties. The donor properties of these ligands can be effectively modified by introducing electron‐donating substituents (e.g. alkyl groups) into the heterocycle. On the other hand, substituents in the α‐position of the pyridine ring can create steric hindrance, which significantly influences the coordination number and geometry. To achieve a better understanding of these effects, copper(II) complexes with sterically demanding N‐(6‐methylpyridin‐2‐yl)acetamide ligands (L ) and monoanions of different size, shape and coordination ability have been chosen as model compounds. The crystal structures of three new compounds, bromidobis[N‐(6‐methylpyridin‐2‐yl‐κN )acetamide‐κO ]copper(II) bromide, [CuBr(C₈H₁₀N₂O)]Br, (I), aquabis[N‐(6‐methylpyridin‐2‐yl‐κN )acetamide‐κO ]copper(II) dinitrate, [Cu(C₈H₁₀N₂O)(H₂O)](NO₃)₂, (II), and aquabis[N‐(6‐methylpyridin‐2‐yl‐κN )acetamide‐κO ]copper(II) bis(perchlorate), [Cu(C₈H₁₀N₂O)(H₂O)](ClO₄)₂, (III), have been determined by single‐crystal X‐ray diffraction analysis. It has been shown that the presence of the 6‐methyl group results in either a distorted square‐pyramidal or a distorted trigonal–bipyramidal coordination geometry around the Cu^II centres instead of the typical octahedral geometry observed when the methyl substituent is absent or occupies any other position on the pyridine ring. Moreover, due to the steric hindrance provided by the L ligands, only the bromide ligand, the smallest of the series, enters into the first coordination sphere of the Cu^II ion in (I). In (II) and (III), the vacant coordination site of the Cu^II ion is occupied by a water molecule, while the nitrate and perchlorate anions are not involved in coordination to the metal centre. The structures of (I)–(III) are characterized by the presence of one‐dimensional infinite chains formed by hydrogen bonds of the types N—H…Br [in (I)], N—H…O and O—H…O [in (II) and (III)] between the amide groups of the L ligands, the coordinated water molecules and the uncoordinated anions. The hydrogen‐bonded chains are further interconnected through π–π stacking interactions between the pyridine rings of the L ligands, with approximate interplanar separations of 3.5–3.6 Å.     

Hydrothermal Synthesis of g‐C3N4/NiFe2O4 Nanocomposite and Its Enhanced Photocatalytic Activity

Herein, for the first time, a direct Z‐scheme g‐C₃N₄/NiFe₂O₄ nanocomposite photocatalyst was prepared using facile one‐pot hydrothermal method and characterized using XRD, FT‐IR, DRS, PL, SEM, EDS, TEM, HRTEM, XPS, BET and VSM characterized techniques. The result reveals that the NiFe₂O₄ nanoparticles are loaded on the g‐C₃N₄ sheets successfully. The photocatalytic activities of the as‐prepared photocatalysts were evaluated for the degradation of methyl orange (MO) under visible light irradiation. It was shown that the photocatalytic activity of the g‐C₃N₄/NiFe₂O₄ nanocomposite is about 4.4 and 3 times higher than those of the pristine NiFe₂O₄ and g‐C₃N₄ respectively. The enhanced photocatalytic activity could be ascribed to the formation of g‐C₃N₄/NiFe₂O₄ direct Z‐scheme photocatalyst, which results in efficient space separation of photogenerated charge carriers. More importantly, the as‐prepared Z‐scheme photocatalyst can be recoverable easily from the solution by an external magnetic field and it shows almost the same activity for three consecutive cycles. Considering the simplicity of preparation method, this work will provide new insights into the design of high‐performance magnetic Z‐scheme photocatalysts for organic contaminate removal.     

Ligand‐forced dimerization of copper(I)–olefin complexes bearing a 1,3,4‐thiadiazole core

As an important class of heterocyclic compounds, 1,3,4‐thiadiazoles have a broad range of potential applications in medicine, agriculture and materials chemistry, and were found to be excellent precursors for the crystal engineering of organometallic materials. The coordinating behaviour of allyl derivatives of 1,3,4‐thiadiazoles with respect to transition metal ions has been little studied. Five new crystalline copper(I) π‐complexes have been obtained by means of an alternating current electrochemical technique and have been characterized by single‐crystal X‐ray diffraction and IR spectroscopy. The compounds are bis[μ‐5‐methyl‐N‐(prop‐2‐en‐1‐yl)‐1,3,4‐thiadiazol‐2‐amine]bis[nitratocopper(I)], [Cu₂(NO₃)₂(C₆H₉N₃S)₂], (1), bis[μ‐5‐methyl‐N‐(prop‐2‐en‐1‐yl)‐1,3,4‐thiadiazol‐2‐amine]bis[(tetrafluoroborato)copper(I)], [Cu₂(BF₄)₂(C₆H₉N₃S)₂], (2), μ‐aqua‐bis{μ‐5‐[(prop‐2‐en‐1‐yl)sulfanyl]‐1,3,4‐thiadiazol‐2‐amine}bis[nitratocopper(I)], [Cu₂(NO₃)₂(C₅H₇N₃S₂)₂(H₂O)], (3), μ‐aqua‐(hexafluorosilicato)bis{μ‐5‐[(prop‐2‐en‐1‐yl)sulfanyl]‐1,3,4‐thiadiazol‐2‐amine}dicopper(I)–acetonitrile–water (2/1/4), [Cu₂(SiF₆)(C₅H₇N₃S₂)₂(H₂O)]·0.5CH₃CN·2H₂O, (4), and μ‐benzenesulfonato‐bis{μ‐5‐[(prop‐2‐en‐1‐yl)sulfanyl]‐1,3,4‐thiadiazol‐2‐amine}dicopper(I) benzenesulfonate–methanol–water (1/1/1), [Cu₂(C₆H₅O₃S)(C₅H₇N₃S₂)₂](C₆H₅O₃S)·CH₃OH·H₂O, (5). The structure of the ligand 5‐methyl‐N‐(prop‐2‐en‐1‐yl)‐1,3,4‐thiadiazol‐2‐amine (Mepeta ), C₆H₉N₃S, was also structurally characterized. Both Mepeta and 5‐[(prop‐2‐en‐1‐yl)sulfanyl]‐1,3,4‐thiadiazol‐2‐amine (Pesta ) (denoted L ) reveal a strong tendency to form dimeric {Cu₂L ₂}²⁺ fragments, being attached to the metal atom in a chelating–bridging mode via two thiadiazole N atoms and an allylic C=C bond. Flexibility of the {Cu₂(Pesta )₂}²⁺ unit allows the Cu^I atom site to be split into two positions with different metal‐coordination environments, thus enabling the competitive participation of different molecules in bonding to the metal centre. The Pesta ligand in (4) allows the Cu^I atom to vary between water O‐atom and hexafluorosilicate F‐atom coordination, resulting in the rare case of a direct Cu^I…FSiF₅²⁻ interaction. Extensive three‐dimensional hydrogen‐bonding patterns are formed in the reported crystal structures. Complex (5) should be considered as the first known example of a Cu^I(C₆H₅SO₃) coordination compound. To determine the hydrogen‐bond interactions in the structures of (1) and (2), a Hirshfeld surface analysis has been performed.     

`0'‐ and `8'‐shaped complexes generated from a nano‐sized oxadiazole‐containing organic ligand with CdI2 and CuI

A new nano‐sized rigid double‐armed oxadiazole‐bridged organic ligand, 2,5‐bis{2‐methyl‐5‐[2‐(pyridin‐3‐yl)ethenyl]phenyl}‐1,3,4‐oxadiazole, C₃₀H₂₀N₄O, L or (I), which adopts a cis conformation in the solid state, has been synthesized and used to create the two novel metallocycle complexes (2,5‐bis{2‐methyl‐5‐[2‐(pyridin‐3‐yl‐κN)ethenyl]phenyl}‐1,3,4‐oxadiazole)diiodidocadmium(II) dichloromethane monosolvate, [CdI₂(C₃₀H₂₀N₄O)]·CH₂Cl₂, (II), and di‐μ‐iodido‐bis[(2,5‐bis{2‐methyl‐5‐[2‐(pyridin‐3‐yl‐κN)ethenyl]phenyl}‐1,3,4‐oxadiazole)copper(I)], [Cu₂I₂(C₃₀H₂₀N₄O)₂], (III). Molecules of complex (II) adopts a 20‐membered `0'‐shaped metallocycle structure with crystallographic mirror symmetry. The discrete units are linked into one‐dimensional chains through intermolecular π–π and C—H...π interactions. In (III), the two I atoms and two Cu<sup>I</sup> atoms form a {Cu<sub>2</sub>(μ‐I)<sub>2</sub>} cluster. One {Cu<sub>2</sub>(μ‐I)<sub>2</sub>} cluster and two L ligands form two 20‐membered monometallic rings in a head‐to‐head fashion, leading to a discrete centrosymmetric `8'‐shaped metallocyclic complex. These metallocycles stack together via two kinds of intermolecular π–π interactions to generate a two‐dimensional network in the ac plane. The luminescence properties of (I)–(III) were investigated in the solid state at room temperature and displayed an obvious red shift.     

Preparation of high‐activity AgBr/Ag3PO4 photocatalyst based on hexadecyltrimethylammonium bromide and mechanism of photocatalytic enhancement

A high‐activity AgBr/Ag₃PO₄ heterojunction photocatalyst was synthesized based on hexadecyltrimethylammonium bromide. Its microspheres were characterized using X‐ray diffractometry, transmission electron microscopy and ultraviolet–visible diffuse reflectance spectroscopy. The new photocatalyst with high photocatalytic activity exceptionally outperforms pure Ag₃PO₄ and AgBr in methyl orange degradation. The enhancement of photocatalytic activity is attributed to the efficient separation of electron–hole pairs. In this photocatalytic reaction, h⁺ and ^?O^2? are the main reactive species that induce visible‐light‐driven degradation.     

Four oxoindole‐linked α‐alkoxy‐β‐amino acid derivatives

Four structures of oxoindolyl α‐hydroxy‐β‐amino acid derivatives, namely, methyl 2‐{3‐[(tert‐butoxycarbonyl)amino]‐1‐methyl‐2‐oxoindolin‐3‐yl}‐2‐methoxy‐2‐phenylacetate, C₂₄H₂₈N₂O₆, (I), methyl 2‐{3‐[(tert‐butoxycarbonyl)amino]‐1‐methyl‐2‐oxoindolin‐3‐yl}‐2‐ethoxy‐2‐phenylacetate, C₂₅H₃₀N₂O₆, (II), methyl 2‐{3‐[(tert‐butoxycarbonyl)amino]‐1‐methyl‐2‐oxoindolin‐3‐yl}‐2‐[(4‐methoxybenzyl)oxy]‐2‐phenylacetate, C₃₁H₃₄N₂O₇, (III), and methyl 2‐[(anthracen‐9‐yl)methoxy]‐2‐{3‐[(tert‐butoxycarbonyl)amino]‐1‐methyl‐2‐oxoindolin‐3‐yl}‐2‐phenylacetate, C₃₈H₃₆N₂O₆, (IV), have been determined. The diastereoselectivity of the chemical reaction involving α‐diazoesters and isatin imines in the presence of benzyl alcohol is confirmed through the relative configuration of the two stereogenic centres. In esters (I) and (III), the amide group adopts an anti conformation, whereas the conformation is syn in esters (II) and (IV). Nevertheless, the amide group forms intramolecular N—H...O hydrogen bonds with the ester and ether O atoms in all four structures. The ether‐linked substituents are in the extended conformation in all four structures. Ester (II) is dominated by intermolecular N—H...O hydrogen‐bond interactions. In contrast, the remaining three structures are sustained by C—H...O hydrogen‐bond interactions.     

A new one‐dimensional CuII complex with a three‐dimensional supramolecular architecture incorporating benzene‐1,3‐dicarboxylate and 1‐[(1H‐benzotriazol‐1‐yl)methyl]‐1H‐imidazole

Subtle modifications of N‐donor ligands can result in complexes with very different compositions and architectures. In the complex catena‐poly[[bis{1‐[(1H‐benzotriazol‐1‐yl)methyl]‐1H‐imidazole‐κN ³}copper(II)]‐μ‐benzene‐1,3‐dicarboxylato‐κ³O ¹,O ^1′:O ³], {[Cu(C₈H₄O₄)(C₁₀H₉N₅)₂(H₂O)]·2H₂O}_n , each Cu^II ion is six‐coordinated by two N atoms from two crystallographically independent 1‐[(1H‐benzotriazol‐1‐yl)methyl]‐1H‐imidazole (bmi) ligands, by three O atoms from two symmetry‐related benzene‐1,3‐dicarboxylate (bdic²⁻) ligands and by one water molecule, leading to a distorted CuN₂O₄ octahedral coordination environment. The Cu^II ions are connected by bridging bdic²⁻ anions to generate a one‐dimensional chain. The bmi ligands coordinate to the Cu^II ions in monodentate modes and are pendant on opposite sides of the main chain. In the crystal, the chains are linked by O—H…O and O—H…N hydrogen bonds, as well as by π–π interactions, into a three‐dimensional network. A thermogravimetric analysis was carried out and the fluorescence behaviour of the complex was also investigated.     

Improvement of the Visible‐Light Photocatalytic Performance of TiO2 by Carbon Mesostructures

An improvement in the photodegradation performance for dyes due to interaction between carbon and titania in a self‐assembled mesoporous C? TiO₂ composite catalyst, even for the difficult degradation of azo dyes, is reported herein. The dye removal process involves adsorption of the dye from water by the mesoporous carbon–titania, followed by photodegradation on the separated dye‐loaded solid. Such adsorption–catalysis cycles can be carried out more than 80 times without discernible loss of photocatalytic activity or the anatase content of the composite. In each run, about 120 mg dye per g catalyst can be degraded. The mesoporous carbon–titania catalyst also exhibits a high capacity for converting methyl orange in aqueous solution under visible light. Characterization by XRD, TEM, and N₂ sorption techniques has revealed that the self‐assembled composite catalyst has an ordered mesostructure, uniform mesopores (4.3 nm), a large pore volume (0.30 cm³ g^?1), and a high surface area (348 m² g^?1). The pore walls are composed of amorphous carbon and anatase nanoparticles of size 4.2 nm, which are well dispersed and confined. X‐ray photoelectron spectroscopy (XPS), surface photovoltage spectroscopy (SPS), and UV/Vis absorption results indicate doping of carbon into the anatase lattice and a change in the bandgap of the semiconductor. The synergistic improvement in the composite catalyst can be attributed to the following features: (1) carbon doping of the anatase lattice modifies its bandgap and enhances its activity under visible light; (2) confinement within carbon pore walls prevents aggregation of tiny anatase nanoparticles, improving their activity and stability; (3) the mesopores provide a confined space for photocatalysis; and (4) the strong adsorption ability of porous carbon for organic substances ensures that large quantities can be processed and inhibits further diffusion of the adsorbed organic substances, thereby enhancing the mineralization on anatase.     

A Co‐MOF with a (4,4)‐connected binodal two‐dimensional topology: synthesis,structure and photocatalytic properties

The Co‐MOF poly[[diaqua{μ₄‐1,1,2,2‐tetrakis[4‐(1H‐1,2,4‐triazol‐1‐yl)phenyl]ethylene‐κ⁴N:N′:N′′:N′′′}cobalt(II)] benzene‐1,4‐dicarboxylic acid benzene‐1,4‐dicarboxylate], {[Co(C₃₄H₂₄N₁₂)(H₂O)₂](C₈H₄O₄)·C₈H₆O₄}_n or {[Co(ttpe)(H₂O)₂](bdc)·(1,4‐H₂bdc)}_n, (I), was synthesized by the hydrothermal method using 1,1,2,2‐tetrakis[4‐(1H‐1,2,4‐triazol‐1‐yl)phenyl]ethylene (ttpe), benzene‐1,4‐dicarboxylic acid (1,4‐H₂bdc) and Co(NO₃)₂·6H₂O, and characterized by single‐crystal X‐ray diffraction, IR spectroscopy, powder X‐ray diffraction (PXRD), luminescence, optical band gap and valence band X‐ray photoelectron spectroscopy (VB XPS). Co‐MOF (I) shows a (4,4)‐connected binodal two‐dimensional topology with a point symbol of {4⁴·6²}{4⁴·6²}. The two‐dimensional networks capture free neutral 1,4‐H₂bdc molecules and bdc^2? anions, and construct a three‐dimensional supramolecular architecture via hydrogen‐bond interactions. MOF (I) is a good photocatalyst for the degradation of methylene blue and rhodamine B under visible‐light irradiation and can be reused at least five times.     

[N,N′‐Bis­(salicyl­idene)‐2,2‐di­methyl‐1,3‐propane­diaminato]­nickel(II) and [N,N′‐bis­(salicyl­idene)‐2,2‐di­methyl‐1,3‐propane­diaminato]copper(II)

In the title compounds, {2,2′‐[2,2‐di­methyl‐1,3‐propane­diyl­bis­(nitrilo­methyl­idyne)]­diphenolato‐κ⁴N,N′,O,O′}nickel(II), [Ni(C₁₉H₂₀N₂O₂)], and {2,2′‐[2,2‐di­methyl‐1,3‐propane­diyl­bis­(nitrilo­methyl­idyne)]­diphenolato‐κ⁴N,N′,O,O′}copper(II), [Cu(C₁₉H₂₀N₂O₂)], the Ni^II and Cu^II atoms are coordinated by two iminic N and two phenolic O atoms of the N,N′‐bis­(salicyl­idene)‐2,2‐di­methyl‐1,3‐propane­diaminate (SALPD^2?, C₁₇H₁₆N₂O₂^2?) ligand. The geometry of the coordination sphere is planar in the case of the Ni^II complex and distorted towards tetrahedral for the Cu^II complex. Both complexes have a cis configuration imposed by the chelate ligand. The dihedral angles between the N/Ni/O and N/Cu/O coordination planes are 17.20 (6) and 35.13 (7)°, respectively.     

Synthesis of Hierarchical Macro‐/Mesoporous Solid‐Solution Photocatalysts by a Polymerization–Carbonization–Oxidation Route: The Case of Ce0.49Zr0.37Bi0.14O1.93

A hierarchical macro‐/mesoporous Ce_0.49Zr_0.37Bi_0.14O_1.93 solid‐solution network has been synthesized on a large scale by means of a simple and general polymerization–carbonization–oxidation synthetic route. The as‐prepared product has been characterized by SEM, XRD, TEM, BET surface area measurement, UV/Vis diffuse‐reflectance spectroscopy, energy‐dispersive X‐ray spectroscopy (EDS), and photoelectrochemistry measurements. The photocatalytic activity of the product has been demonstrated through the photocatalytic degradation of methyl orange. Structural characterization has indicated that the hierarchical macro‐/mesoporous solid‐solution network not only contains numerous macropores, but also possesses an interior mesoporous structure. The mesopore size and BET surface area of the network have been measured as 2–25 nm and 140.5 m² g^?1, respectively. The hierarchical macro‐/mesoporous solid‐solution network with open and accessible pores was found to be well‐preserved after calcination at 800 °C, indicating especially high thermal stability. Due to its high specific surface area, the synergistic effect of the coupling of macropores and mesopores, and its high crystallinity, the Ce_0.49Zr_0.37Bi_0.14O_1.93 solid‐solution material shows a strong structure‐induced enhancement of visible‐light harvest and exhibits significantly improved visible‐light photocatalytic activity in the photodegradation of methyl orange compared with those of its other forms, such as mesoporous hollow spheres and bulk particles.     

Crystal structure and photoluminescence properties of a new monomeric copper(II) complex: bis(3‐{[(3‐hydroxypropyl)imino]methyl}‐4‐nitrophenolato‐κ3O,N,O′)copper(II)

Copper(II)–Schiff base complexes have attracted extensive interest due to their structural, electronic, magnetic and luminescence properties. The title novel monomeric Cu^II complex, [Cu(C₁₀H₁₁N₂O₄)₂], has been synthesized by the reaction of 3‐{[(3‐hydroxypropyl)imino]methyl}‐4‐nitrophenol (H₂L ) and copper(II) acetate monohydrate in methanol, and was characterized by elemental analysis, UV and IR spectroscopies, single‐crystal X‐ray diffraction analysis and a photoluminescence study. The Cu^II atom is located on a centre of inversion and is coordinated by two imine N atoms, two phenoxy O atoms in a mutual trans disposition and two hydroxy O atoms in axial positions, forming an elongated octahedral geometry. In the crystal, intermolecular O—H…O hydrogen bonds link the molecules to form a one‐dimensional chain structure and π–π contacts also connect the molecules to form a three‐dimensional structure. The solid‐state photoluminescence properties of the complex and free H₂L have been investigated at room temperature in the visible region. When the complex and H₂L are excited under UV light at 349 nm, the complex displays a strong green emission at 520 nm and H₂L displays a blue emission at 480 nm.     

Construction of (3,8)‐connected three‐dimensional cobalt(II) and copper(II) coordination polymers with 1,3‐bis[(1,2,4‐triazol‐4‐yl)methyl]benzene and benzene‐1,3,5‐tricarboxylate ligands

Coordination polymers (CPs) have been widely studied because of their diverse and adjustable topologies and wide‐ranging applications in luminescence, chemical sensors, magnetism, photocatalysis, gas adsorption and separation. In the present work, two coordination polymers, namely poly[(μ₅‐benzene‐1,3,5‐tricarboxylato‐κ⁶O¹:O^1′:O³:O³:O⁵,O^5′){μ₃‐1,3‐bis[(1,2,4‐triazol‐4‐yl)methyl]benzene‐κ³N:N′:N′′}di‐μ₃‐hydroxido‐dicobalt(II)], [Co₂(C₉H₃O₆)(OH)(C₁₂H₁₂N₆)]_n or [Co₂(btc)(OH)(mtrb)]_n, (1), and poly[[diaquabis(μ₃‐benzene‐1,3,5‐tricarboxylato‐κ³O¹:O³:O⁵)bis{μ₃‐1,3‐bis[(1,2,4‐triazol‐4‐yl)methyl]benzene‐κ³N:N′:N′′}tetra‐μ₃‐hydroxido‐tetracopper(II)] monohydrate], {[Cu₄(C₉H₃O₆)₂(OH)₂(C₁₂H₁₂N₆)₂(H₂O)₂]·H₂O}_n or {[Cu₄(btc)₂(OH)₂(mtrb)₂(H₂O)₂]·H₂O}_n, (2), were synthesized by the hydrothermal method using 1,3‐bis[(1,2,4‐triazol‐4‐yl)methyl]benzene (mtrb) and benzene‐1,3,5‐tricarboxylate (btc^3?). CP (1) exhibits a (3,8)‐coordinated three‐dimensional (3D) network of the 3,8T38 topological type, with a point symbol of {4,5,6}₂{4²·5⁶·6¹⁶·7²·8²}, based on the tetranuclear hydroxide cobalt(II) cluster [Co₄(μ₃‐OH)₂]. CP (2) shows a (3,8)‐coordinated tfz‐d topology, with a point symbol of {4₃}₂{4⁶·6¹⁸·8⁴}, based on the tetranuclear hydroxide copper(II) cluster [Cu₄(μ₃‐OH)₂]. The different (3,8)‐coordinated 3D networks based on tetranuclear hydroxide–metal clusters of (1) and (2) are controlled by the different central metal ions [Co^II for (1) and Cu^II for (2)]. The thermal stabilities and solid‐state optical diffuse‐reflection spectra were measured. The energy band gaps (E_g) obtained for (1) and (2) were 2.72 and 2.29 eV, respectively. CPs (1) and (2) exhibit good photocatalytic degradation of the organic dyes methylene blue (MB) and rhodamine B (RhB) under visible‐light irradiation.     

A two‐dimensional copper(II) coordination polymer based on 2,4′‐oxybis(benzoate) and 4,4′‐bipyridine

The reaction of Cu(NO₃)₂·3H₂O with 2,4′‐oxybis(benzoic acid) and 4,4′‐bipyridine under hydrothermal conditions produced a new mixed‐ligand two‐dimensional copper(II) coordination polymer, namely poly[[(μ‐4,4′‐bipyridine‐κ²N ,N ′)[μ‐2,4′‐oxybis(benzoato)‐κ⁴O ²,O ^2′:O ⁴,O ^4′]copper(II)] monohydrate], {[Cu(C₁₄H₈O₅)(C₁₀H₈N₂)]·H₂O}_n , which was characterized by elemental analysis, IR spectroscopy, thermogravimetric analysis and single‐crystal X‐ray diffraction. The X‐ray diffraction crystal structure analysis reveals that the Cu^II ions are connected to form a two‐dimensional wave‐like network through 4,4′‐bipyridine and 2,4′‐oxybis(benzoate) ligands. The two‐dimensional layers are expanded into a three‐dimensional supramolecular structure through intermolecular O—H…O and C—H…O hydrogen bonds. Furthermore, magnetic susceptibility measurements indicate that the complex shows weak antiferromagnetic interactions between adjacent Cu^II ions.