Photochemical Hydrogen Generation Initiated by Oxidative Quenching of the Excited Ru(bpy)32+* by a Bio‐Inspired [2Fe2S] Complex

A diiron dithiolate complex 1 containing 1,8‐naphthalic anhydride bridge was prepared, which possessed the lowest reduction potential for the synthetic diiron complexes modeled on the active site of [FeFe] hydrogenase reported so far. For the first time, oxidative quenching of the excited Ru(bpy)₃²⁺* through electron transfer to a bio‐inspired [2Fe2S] complex was corroborated. Hydrogen evolution, driven by visible light, was successfully observed for a three‐component system, consisting of Ru(bpy)₃²⁺, complex 1 , and EDTA as electron donor in aqueous/organic media. These results provide a basis and also opportunity to develop a photo water splitting system employing Fe‐based catalysts without sacrificial electron donors.     

Fe3O4@NCs/BF0.2: A magnetic bio‐based nanocatalyst for the synthesis of 2,3‐dihydro‐1H‐perimidines

Nanocellulose (NC) materials have some unique properties, which make them attractive as organic or inorganic supports for catalytic applications. Nanocatalysts with diameters of less than 100 nm are difficult to separate from the reaction mixture, therefore, magnetic nanoparticles (MNPs) were used as catalysts to overcome this problem. Fe₃O₄@NCs/BF_0.2 as a green, bio‐based, eco‐friendly, and recyclable catalyst was synthesized and characterized using fourier‐transform infrared spectroscopy (FT‐IR), vibrating sample magnetometer (VSM), X‐ray diffraction (XRD), X‐ray fluorescence (XRF), Brunauer–Emmett–Teller (BET), field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), and thermal gravimetric analysis (TGA) techniques. Fe₃O₄@NCs/BF_0.2 was employed for the synthesis of 2,3‐dihydro‐1H‐perimidine derivatives via a reaction of 1,8‐diaminonaphthalene with various aldehydes at room temperature under solvent‐free conditions. The present procedure offers several advantages including a short reaction time, excellent yields, easy separation of catalyst, and environmental friendliness.     

Electrochemical Reduction of Carbon Dioxide to Value‐Added Products: The Electrocatalyst and Microbial Electrosynthesis

The electrochemical reduction of carbon dioxide (CO₂) to value‐added products obtains great attention and investigation worldwide in recent years. The commercialization of this green process relies on the progress of relating high‐performance electrocatalysts and their feasibility with proper reactor design. The microbial electrosynthesis (MES) is an alternative route to reduce CO₂ with electroactive bio‐film electrode as catalyst. This review presents the research status and development of cathode catalysts, particularly focusing on the active sites and development tendency, for highly efficient electrochemical reduction CO₂ from personal viewpoint. Some of our results are also presented to exhibit contributions. MES shows a similar process to the typical electrochemical reduction of CO₂. Their combination is an important trend, and the future research in this field is full of challenges and opportunities.     

Partially bio‐based aromatic polyimides derived from 2,5‐furandicarboxylic acid with high thermal and mechanical properties

Two novel bio‐based diamines are synthesized through introduction of renewable 2,5‐furandicarboxylic acid (2,5‐FDCA), and the corresponding aromatic polyimides (PIs) are then prepared by these diamines with commercially available aromatic dianhydrides via two‐step polycondensation. The partially bio‐based PIs possess high glass transition temperatures (T_gs) in the range from 266 to 364 °C, high thermal stability of 5% weight loss temperatures (T_5%s) over 420 °C in nitrogen and outstanding mechanical properties with tensile strengths of 79–138 MPa, tensile moduli of 2.5–5.4 GPa, and elongations at break of 3.0–12.3%. Some colorless PI films (PI‐1‐b and PI‐1‐c) with the transmittances at 450 nm over 85% are prepared. The overall properties of 2,5‐FDCA‐based PIs are comparable with petroleum‐based PI derived from isophthalic acid, displaying the potential for development of innovative bio‐based materials. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1058–1066     

Selective Production of Renewable para‐Xylene by Tungsten Carbide Catalyzed Atom‐Economic Cascade Reactions

Tungsten carbide was employed as the catalyst in an atom‐economic and renewable synthesis of para‐xylene with excellent selectivity and yield from 4‐methyl‐3‐cyclohexene‐1‐carbonylaldehyde (4‐MCHCA). This intermediate is the product of the Diels–Alder reaction between the two readily available bio‐based building blocks acrolein and isoprene. Our results suggest that 4‐MCHCA undergoes a novel dehydroaromatization–hydrodeoxygenation cascade process by intramolecular hydrogen transfer that does not involve an external hydrogen source, and that the hydrodeoxygenation occurs through the direct dissociation of the C=O bond on the W₂C surface. Notably, this process is readily applicable to the synthesis of various (multi)methylated arenes from bio‐based building blocks, thus potentially providing a petroleum‐independent solution to valuable aromatic compounds.     

Palladium Single Atoms on TiO2 as a Photocatalytic Sensing Platform for Analyzing the Organophosphorus Pesticide Chlorpyrifos

Traditional methods for analyzing organophosphorus pesticide chlorpyrifos, usually require the tedious sample pretreatment and sophisticated bio‐interfaces, leading to the difficulty for real‐time analysis. Herein, we use palladium single‐atom (PdSA)/TiO₂ as a photocatalytic sensing platform to directly detect chlorpyrifos with high sensitivity and selectivity. PdSA/TiO₂, prepared by an in situ photocatalytic reduction of PdCl₄^2? on the TiO₂, shows much higher photocatalytic activity (10 mol g^?1 h^?1) for hydrogen evolution reaction than Pd nanoparticles (1.95 mol g^?1 h^?1), and excellent stability. In the presence of chlorpyrifos, the photocatalytic activity of PdSA/TiO₂ decreases. Through this inhibition effect the platform can realize a detection limit for chlorpyrifos of 0.01 ng mL^?1, much lower than the maximum residue limit (10 ppb) permitted by the U.S. Environmental Protection Agency.     

Vanillin‐derived phosphorus‐containing compounds and ammonium polyphosphate as green fire‐resistant systems for epoxy resins with balanced properties

Flame retardants from vanillin when utilized together with ammonium polyphosphate (APP) yield excellent synergistic flame retardancy toward epoxy resins. Bisphenol A epoxy resins have been widely used due to their excellent mechanical properties, chemical resistance, electrical properties, adhesion, etc., while they are flammable. Environment‐friendly and bio‐based flame retardants have captured increasing attention due to their ecological necessity. In this paper, 3 bio‐based flame retardants were synthesized from abundant and more importantly renewable vanillin, and their chemical structures were determined by ¹H NMR and ¹³C NMR. They were used together with APP (an environment‐friendly commercial flame retardant) to improve the fire resistance of bisphenol A epoxy resin. With the addition APP content of 15 phr, the modified bisphenol A epoxy resin could reach UL‐94V0 rating during vertical burning test and limit oxygen index values of above 35%, but reducing APP content to 10 phr, the flame retardancy became very poor. With the total addition content of 10 phr, the epoxy resins modified by 7 to 9 phr APP and 1 to 3 phr bio‐based flame retardants with epoxy groups or more benzene rings showed excellent flame retardancy with UL‐94V0 rating and limit oxygen index values of around 29%. The T_gs of the epoxy resins could be remained or even increased after introducing bio‐based flame retardants, as the control; those of APP alone‐modified epoxy resins compromised a lot. The green synergistic flame‐retardant systems have a great potential to be used in high‐performance materials.     

Copper(I) oxide nanoparticles supported on magnetic casein as a bio‐supported and magnetically recoverable catalyst for aqueous click chemistry synthesis of 1,4‐disubstituted 1,2,3‐triazoles

Copper(I) oxide nanoparticles supported on magnetic casein (Cu₂O/Casein@Fe₃O₄NPs) has been synthesized as a bio‐supported catalyst and was characterized using powder X‐ray diffraction, transmission electron microscopy, energy dispersive X‐ray and Fourier transform infrared spectroscopies, thermogravimetric analysis and inductively coupled plasma optical emission spectrometry. The catalytic activity of the synthesized catalyst was investigated in one‐pot three‐component reactions of alkyl halides, sodium azide and alkynes to prepare 1,4‐disubstituted 1,2,3‐triazoles with high yields in water. The reaction work‐up is simple and the catalyst can be magnetically separated from the reaction medium and reused in subsequent reactions.     

Controllable synthesis of bio‐based polylactide diols using an organocatalyst in solvent‐free conditions

Controllable synthesis of bio‐based polylactide (PLA) diols was realized by the ring‐opening polymerization (ROP) of lactide (LA) in the presence of 1,4‐butanediol (BDO) using 1,8‐diazabicyclo[5.4.0]undec‐7‐ene (DBU) as an organocatalyst in solvent‐free conditions. The catalytic activity and conversion of LA could reach ∼1 kg g⁻¹ DBU and >97%, respectively, and the polymerization yielded polymers with narrow polydispersity index (PDI) (1.15–1.29). Interestingly, the number average molecular weight (M_n) of the obtained PLA diol was in excellent linear relation with the molar ratio of LA and BDO, and hence can be precisely controlled. The structure of the diol was clearly confirmed by ¹H and ¹³C NMR, FTIR, and MALDI‐TOF mass spectra, proving BDO as an initiation‐transfer agent to participate in the polymerization. Kinetic study of the ROP demonstrates a pseudo‐first‐order kinetic model and a controlled “living” nature. Notably, it is found that the glass transition temperature (T_g) of the diol significantly depends on the M_n. Furthermore, various chain transfer agents and organocatalysts can also be used to successfully synthesize well‐defined PLA diols. Especially, functional bio‐based dihydric alcohols such as 2,5‐furandimethanol (FDMO)‐initiated ROP in this system could result in fully bio‐based PLA diols with functionality. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 968–976     

Overcoming Phase‐Transfer Limitations in the Conversion of Lipophilic Oleo Compounds in Aqueous Media—A Thermomorphic Approach

A new process concept has been developed for recycling transition‐metal catalysts in the synthesis of moderately polar products via aqueous thermomorphic multicomponent solvent systems. This work focuses on the use of “green” solvents (1‐butanol and water) in the hydroformylation of the bio‐based substrate methyl 10‐undecenoate. Following the successful development of a biphasic reaction system on the laboratory scale, the reaction was transferred to a continuously operated miniplant to demonstrate the robustness of this innovative recycling concept for homogenous catalysts.     

Comparison of mouse plasma and brain tissue homogenate sample pretreatment methods prior to high‐performance liquid chromatography for a new 1,2,4‐triazole derivative with anticonvulsant activity

The focus of the study was to develop a bio‐analytical assay for a 1,2,4‐triazole derivative from plasma and brain tissue homogenate samples. The goal was to compare analytical techniques that facilitate high accuracy with simplified sample processing. In this study, commonly used standard protein precipitation and solid‐phase extraction methods utilizing C₁₈ and cartridges of Hybrid technology were compared in terms of their ability for sample pretreatment and removal of biological matrices before high‐performance liquid chromatography quantification. Fast classical reversed‐phase chromatography on a C₁₈ column paired with selective sample preparation using Hybrid solid‐phase extraction technology resulted in the most precise bio‐analytical determination of the hydrophobic 1,2,4‐triazole derivative in both biological samples studied. The obtained recovery values were above 95% with the coefficient of variation lower than 5%.     

Photoelectrochemical Complexes of Fucoxanthin‐Chlorophyll Protein for Bio‐Photovoltaic Conversion with a High Open‐Circuit Photovoltage

Open‐circuit photovoltage (V_oc ) is among the critical parameters for achieving an efficient light‐to‐charge conversion in existing solar photovoltaic devices. Natural photosynthesis exploits light‐harvesting chlorophyll (Chl) protein complexes to transfer sunlight energy efficiently. We describe the exploitation of photosynthetic fucoxanthin‐chlorophyll protein (FCP) complexes for realizing photoelectrochemical cells with a high V_oc . An antenna‐dependent photocurrent response and a V_oc up to 0.72 V are observed and demonstrated in the bio‐photovoltaic devices fabricated with photosynthetic FCP complexes and TiO₂ nanostructures. Such high V_oc is determined by fucoxanthin in FCP complexes, and is rarely found in photoelectrochemical cells with other natural light‐harvesting antenna. We think that the FCP‐based bio‐photovoltaic conversion will provide an opportunity to fabricate environmental benign photoelectrochemical cells with high V_oc , and also help improve the understanding of the essential physics behind the light‐to‐charge conversion in photosynthetic complexes.     

Luminescent Solar Concentrators Based on Renewable Polyester Matrices

This study reports for the first time the use of bio‐based alternatives for PMMA as host matrix for luminescent solar concentrators (LSCs). Notably, two types of renewable polyesters were synthesized in varying molar ratios via a two‐step melt‐polycondensation reaction with dibutyl tin oxide as catalyst. The first is a homopolymer of diethyl 2,3:4,5‐di‐O‐methylene galactarate (GxMe) and isosorbide (IGPn), and the second is a random copolymer of GxMe with 1,3‐propanediol and dimethyl terephthalate (GTPn). The two polyesters were found to be optically transparent, totally amorphous with a T_g higher than 45 °C and temperature resistance comparable to PMMA. Lumogen Red (LR) and an aggregation‐induced emission (AIE) fluorophore, TPETPAFN, were utilized as fluorophores and the derived thin polymer films (25 μm) were found highly homogeneous, especially for those prepared from GTPn, possibly due to the presence of compatibilizing terephthalate units in the matrix composition and the higher molecular weight. The spectroscopic characterization and the optical efficiency determination (η_opt) evidenced LSCs performances similar or superior to those collected from LR/PMMA thin films. Noteworthy, η_opt of 7.7 % and 7.1 % were recorded for the GTPn‐based matrix containing LR and TPETPAFN, respectively, thus definitely supporting the bio‐based polyesters as renewable and highly fluorophore‐compatible matrices for high‐performance LSCs.     

Nanoflower‐Like Bi2WO6 Encapsulated in ORMOSIL as a Novel Photocatalytic Antifouling and Foul‐Release Coating

Herein, the first multi‐purpose antifouling and foul‐release photocatalytic coating based on ORMOSIL thin films doped with nanoflower‐like Bi₂WO₆ is described. Irradiation with visible light of the new films immersed in water produces significant amounts of H₂O₂ by photocatalytic oxidation of water, and allows the degradation of (bio)organic pollutants at the outer surface of the xerogel film.     

Synthesis of polyethylene with bimodal molecular weight distribution by supported iron‐based catalyst

Through immobilization of two iron‐based complexes, [((2,6‐MePh)N = C(Me))₂C₅H₃N]FeCl₂ ( 1 ) and [((2,6‐iPrPh)N = C(Me))₂C₅H₃N]FeCl₂ ( 2 ), on SiO₂ pretreated with tetraethylaluminoxane (TEAO), two supported iron‐based catalysts, 1 /TEAO/SiO₂ ( 3 ) and 2 /TEAO/SiO₂ ( 4 ), were prepared. These two supported catalysts 3 and 4 could be used to catalyze ethylene polymerization with moderate polymerization activity and prepare linear high‐density polyethylene with bimodal molecular weight distribution (MWD). It was demonstrated that immobilization of catalyst could significantly improve molecular weight (MW) of high‐MW fraction of the resultant polyethylene, as well as maintain bimodal MWD of polyethylene produced by the corresponding homogeneous catalysts. Such bimodal MWD of polyethylene produced by supported iron‐based catalysts could be well tailored by varying polymerization conditions, such as ethylene pressure and molar ratio of Al to Fe. It has been proven that TEAO is an efficient activator for both homogeneous and heterogeneous iron‐based catalysts for producing polyethylene with bimodal MWD. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5662–5669, 2004     

Development of dipyridine‐based coordinative polymers for reusable heterogeneous catalysts

Poly(di(pyridin‐2‐yl)methyl acrylate) (PDPyMA), which was obtained by the free radical polymerization of designed coordinative monomer of di(pyridin‐2‐yl)methyl acrylate, is able to coordinate with various metal ions to form heterogeneous catalysts for diverse catalytic reactions. The Pd and Cu complexes supported by PDPyMA were developed for the heterogeneous Suzuki‐Miyaura reaction and Friedel‐Crafts alkylation, respectively. The PDPyMA‐based catalysts showed no significant decline of reactivity after five times recycling. However, the hydrolysis of the PDPyMA backbone under alkaline conditions limited the catalytic efficiency of this heterogeneous catalyst so that the coordinative monomer was redesigned as 1,1‐di(pyridine‐2‐yl)‐2‐(4‐vinylphenyl)ethan‐1‐ol and then 2,2′‐(1‐methoxy‐2‐(4‐vinylphenyl)ethane‐1,1‐diyl)dipyridine (MVPhDPy). With copolymerization of N‐isopropyl acrylamide (NIPAM), the efficiency of polymer‐based heterogeneous catalysts could be further raised, demonstrated by the increased turn over number in the Suzuki‐Miyaura reaction, which approached 5,260 by using the catalyst formed from poly(MVPhDPy‐co‐NIPAM) and Pd(OAc)₂. poly(MVPhDPy‐co‐NIPAM) copolymer, therefore, could be a versatile platform to support different metal ions for various heterogeneous catalytic reactions.     

Development of toughened bio‐based epoxy with epoxidized linseed oil as reactive diluent and cured with bio‐renewable crosslinker

In the current work, renewable resourced toughened epoxy blend has been developed using epoxidized linseed oil (ELO) and bio‐based crosslinker. Epoxidation of linseed oil was confirmed through FTIR and ¹H NMR spectra. The ELO bio‐resin was blended at different compositions (10, 20, and 30 phr) with a petroleum‐based epoxy (DGEBA) as reactive diluent to reduce the viscosity for better processibility and cured with cardanol‐derived phenalkamine to overcome the brittleness. The flow behavior of the neat epoxy and modified bio‐epoxy resin blend systems was analyzed by Cross model at low and high shear rates. The tensile and impact behavior studies revealed that the toughened bio‐epoxy blend with 20 to 30 phr of ELO showed moderate stiffness with much higher elongation at break 7% to 13%. Incorporation of higher amount of ELO (20 to 30 phr) increases enthalpy of curing without affecting peak temperature of curing. The thermal degradation behavior of the ELO based blends exhibits similar trend as neat epoxy. The higher intensity or broadened loss tangent curve of bio‐epoxy blends revealed higher damping ability. FE‐SEM analysis showed a rough and rippled surface of bio‐based epoxy blends ensuring effective toughening. Reduced viscosity of resin due to maximum possible incorporation of bio‐resin and use of phenalkamine as curing agent leads to an eco‐friendly toughened epoxy and can be useful for specific coating and structural application.     

Fuel‐Free Bio‐photoelectrochemical Cells Based on a Water/Oxygen Circulation System with a Ni:FeOOH/BiVO4 Photoanode

A bio‐photoelectrochemical cell (BPEC) based on a fuel‐free self‐circulation water–oxygen–water system was fabricated. It consists of Ni:FeOOH modified n‐type bismuth vanadate (BiVO₄) photoanode and laccase catalyzed biocathode. In this BPEC, irradiation of the photoanode generates photocurrent for photo‐oxidation of water to oxygen, which is reduced to water again at the laccase biocathode. Of note, the by‐products of two electrode reactions could continue to be reacted, which means the H₂O and O₂ molecules are retained in an infinite loop of water–oxygen–water without any sacrificial chemical components. As a result, the assembled fuel‐free BPEC exhibits good performance with an open‐circuit potential of 0.97 V and a maximum power density of 205 μW cm^?2 at 0.44 V. This BPEC based on a self‐circulation system offers a fuel‐free model to enhance multiple energy conversion and application in reality.     

Porphyrin‐based polymer‐supported palladium as an excellent and recyclable catalyst for Suzuki–Miyaura coupling reaction in water

A porphyrin‐based polymer with high surface area was synthesized using 5,10,15,20‐tetraphenylporphyrin through a one‐pot Friedel–Crafts alkylation reaction. Pd(II) was successfully supported on this polymer. This strategy provides an easy approach to produce highly stable Pd–porphyrin‐based polymer. The resulting Pd catalyst was characterized using Fourier transform infrared and X‐ray photoelectron spectroscopies, thermogravimetric analysis, scanning and transmission electron microscopies and N₂ adsorption–desorption measurements. This porphyrin‐based polymer‐supported Pd was used as a heterogeneous catalyst for Suzuki–Miyaura coupling reaction in water. The results demonstrated that this Pd catalyst indeed exhibited excellent catalytic activity and recycling performance in water, even for inactive aryl chloride substrate. A new heterogeneous strategy for catalyzing the Suzuki–Miyaura reaction in water is provided.     

Carbon‐Nanotube‐Supported Bio‐Inspired Nickel Catalyst and Its Integration in Hybrid Hydrogen/Air Fuel Cells

A biomimetic nickel bis‐diphosphine complex incorporating the amino acid arginine in the outer coordination sphere was immobilized on modified carbon nanotubes (CNTs) through electrostatic interactions. The functionalized redox nanomaterial exhibits reversible electrocatalytic activity for the H₂/2 H⁺ interconversion from pH 0 to 9, with catalytic preference for H₂ oxidation at all pH values. The high activity of the complex over a wide pH range allows us to integrate this bio‐inspired nanomaterial either in an enzymatic fuel cell together with a multicopper oxidase at the cathode, or in a proton exchange membrane fuel cell (PEMFC) using Pt/C at the cathode. The Ni‐based PEMFC reaches 14 mW cm⁻², only six‐times‐less as compared to full‐Pt conventional PEMFC. The Pt‐free enzyme‐based fuel cell delivers ≈2 mW cm⁻², a new efficiency record for a hydrogen biofuel cell with base metal catalysts.