Effects of crosslinking agent/diluents/thiol on morphology of the polymer matrix and electro-optical properties of polymer-dispersed liquid crystal

To study effects of the crosslinking agent/diluents/thiol on morphology of the polymer matrix and the electro-optical properties of polymer-dispersed liquid crystal (PDLC) films, samples were prepared by ultraviolet (UV)-initiated polymerisation. Due to the interaction between thiol–acrylate reaction and acrylate monomers polymerisation, the sample compositions were the foremost determinant to the microstructures which in turn played an essential role on the electro-optical properties of the PDLC films. With the increasing content of the crosslinking agent, the LC droplet size decreased, while the thiol had a contrary effect on the LC droplet size. It was demonstrated that the superior properties of the low-driven voltage (37.2 V), the high contrast ratio (148.2), the short response time (14.9 ms) and the high saturation transmittance (86.6%) could benefit from a novel microstructure which had a dense surface and meshes with microspheres attached. It was of great significance for the optimisation and the potential applications of the PDLC films.     

The fabrication of novel optical diffusers based on UV-cured polymer dispersed liquid crystals

Polymer dispersed liquid crystals (PDLCs) with different sizes of the LC droplets are prepared based on the ultraviolet (UV) light curable acrylate monomers/LCs composites to fabricate the optical diffuser films. To acquire light diffusers with high optical performance, the effects of the monomer structure and the UV light intensity on the micro-structure of the PDLC films are studied. Results show that the PDLC films could exhibit a strong light scattering at the premise of maintaining high transmittance in the visible region. As the LC droplets are spherically dispersed in the polymer networks, when the size of LC droplets is about 3.0 μm, the haze can reach 88.5% and the transmittance is nearly 90.0%, which can be used as a bottom diffuser film. While when the size of LC droplets is about 10.0 μm, the haze and transmittance are 39.2% and 90.2%, respectively; hence, it can be a good choice for a top diffuser film. With the advantages of simple preparation, roll-to-roll industrial production and tunable optical properties, it is supported that the films based on UV-cured PDLC films can be applied as outstanding optical diffuser films in the liquid crystal display industry.     

Studies on electro‐optical properties of polymer matrix/LC/ITO nanoparticles composites

In this paper, polymer‐dispersed liquid crystal (PDLC) films consisting of liquid crystal (LC)/monomers/indium tin oxide (ITO) nanoparticles with good near‐infrared absorption property had been fabricated, and the influence of the ITO nanoparticles modified with 3‐methacryloxypropyltrimethoxysilane (KH570) on the PDLC films was systematically studied. First, different liquid crystal content was studied to obtain PDLC films with good electro‐optical properties. And then, various weight ratio of ITO nanoparticles was added to samples. While the content of ITO nanoparticles was increased, the saturation voltage increased and the CR decreased. Though the electro‐optical properties of PDLC samples reduced with the addition ITO nanoparticles, the near‐infrared absorption property of films was enhanced.     

Simple chemical route for nanorod-like cobalt oxide films for electrochemical energy storage applications

We used a simple chemical synthesis route to deposit nanorod-like cobalt oxide thin films on different substrates such as stainless steel (ss), indium tin oxide (ITO), and microscopic glass slides. The morphology of the films show that the films were uniformly spread having a nanorod-like structure with the length of the nanorods shortened on ss substrates. The electrochemical properties of the films deposited at different time intervals were studied using cyclic voltammetry (CV), galvanostatic charge–discharge (GCD), and electrochemical impedance spectroscopy (EIS). The film deposited after 20 cycles on ss gave the highest specific capacity of 67.6 mAh g^?1 and volumetric capacity of 123 mAh cm^?3 at a scan rate 5 mV s^?1 in comparison to 62.0 mAh g^?1 and 113 mAh cm^?3 obtained, respectively, for its counterpart on ITO. The film electrode deposited after 20 cycles on ITO gave the best rate capability and excellent cyclability with no depreciation after 2000 charge–discharge cycles.     

A study on the polymer structures and electro-optical properties of epoxy-mercaptan-based polymer dispersed liquid crystal films

ABSTRACT

In this paper, polymer dispersed liquid crystal (PDLC) films based on epoxy-mercaptan system were prepared by thermal-initiated polymerization. The effects of the liquid crystal (LC) content, the proportion and the functionality of epoxy monomers on the polymer structures and electro-optical properties of the as-made PDLC films were investigated systematically. It was found that the morphologies of the polymer matrix can be altered from polymer meshes to polymer balls by increasing the LC content as well as the functionality of epoxy monomers. Accordingly, the electro-optical properties could be regulated by the morphologies of polymer networks. Especially, the as-made PDLC films with homogeneous porous structures exhibited the optimal electro-optical properties. Consequently, this work offers a meaningful approach to control the microstructures and optimize the electro-optical properties of PDLC films, which indeed can form a wonderful footstone for the wide application of PDLC.     

Control of the microstructure of polymer network and effects of the microstructures on light scattering properties of UV‐cured polymer‐dispersed liquid crystal films

Polymer‐dispersed liquid crystals (PDLC) films were prepared from ultraviolet (UV) irradiation‐induced polymerization of the photopolymerizable monomers in photopolymerizable monomers/nematic liquid crystal (LC) mixtures. The effects of the composition of the mixtures, the curing temperature, and the UV light intensity on the microstructure of the polymer network in the PDLC films were investigated. Furthermore, the effects of the microstructures on the light scattering properties of the PDLC films in the wavelength region of 300–2500 nm were studied experimentally and theoretically based on the combination of three kinds of classical light scattering theories: the Rayleigh‐Gans (RG) approach, the anomalous diffraction (AD) approach, and the geometrical optics (GO) approach. It was found that the sizes of LC domain in PDLC films increased with the increase of the LC content as well as the decrease of the UV curing intensity, while increased at first and then decreased with the increase of the curing temperature. Moreover, smaller LC domain sizes could exhibit strong scattering properties in a smaller VIS wavelength region and the transmittance in NIR region (especially in the wavelength range of 1300–2500 nm) obviously decreased with the increasing sizes of LC domain. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 2090–2099, 2008     

Microstructure analysis of sol‐gel‐derived nanocrystalline ITO thin films

The technique for ITO (Tin‐doped indium oxide) thin films by sol‐gel process is presented in this paper. After annealing at 500° for 15 min, ITO gel films get transformed into nanocrystallined indium tin oxide films. We studied the microstructure of ITO thin film which is closely related to optical and electrical properties. The microstructure of ITO thin film can be observed through high‐resolution transmission electronic spectroscopy (HRTEM) and the Fast Fourier Transform (FFT) technique. The film is nanocrystallite with grain sizes about 20 nm. Also, the surface chemical components were studied by XPS spectra. The transmission and the resistivity of ITO films is 97.0% and 3.5 × 10^?3 Ω?cm, respectively. Copyright © 2010 John Wiley & Sons, Ltd.     

Enhancement of frequency modulation response time for polymer-dispersed liquid crystal

Through the ferroelectric nanoparticles of BaTiO₃ (BTO) doping, the response time for the frequency modulation of the polymer-dispersed liquid crystal (PDLC) was improved. The BTO-doped PDLC cells were prepared by polymerisation induced phase separation (PIPS) process using UV light. The capacitance of the PDLC composites was measured with an impedance analyzer in the frequency range of 100 Hz–1 MHz at 1 V. The dynamic signal for the response time of the PDLC devices was monitored through a digital oscilloscope. The electro-optical properties of the PDLC were found to strongly depend on the doped BTO concentration. The BTO doping caused a large increase in the capacitance. The dielectric constants were drastically decreased in the samples with rather low BTO doping ratio at a high frequency. No outstanding difference in the rising time of the LC was observed in the BTO-doped PDLC device, but the falling time was significantly decreased from 0.334 to 0.094 s. The present results imply that the nanoparticle-doping technology could improve the electro-optical performance of the PDLC requiring fast response and frequency modulation, such as optical modulators and PDLC-hybrid electroluminescence device for flexible electronic devices.     

PDLC composites based on polyvinyl boric acid matrix – a promising pathway towards biomedical engineering

ABSTRACT

Polymer dispersed liquid crystal (PDLC) systems based on a smectic liquid crystal embedded in polyvinylalcohol-boric acid (PVAB) as biocompatible carrying matrix were prepared and characterised. The smectic liquid crystal contains biologically friendly structural blocks and was designed to have a direct isotropic–smectic transition and a mesophase stability range at human body temperature. The resulted PDLCs were characterised from morphological and thermotropic aspects by polarised light microscopy (POM), differential scanning calorimetry (DSC), scanning electron microscopy (SEM) and Raman microspectroscopy, and their surface properties were determined by contact angle measurements and surface energy calculations.

It was concluded that the electron-deficient PVAB matrix constrains the ester liquid crystal to grow as spherical droplets with planar anchoring. The droplet diameter was comprised in the range 4–11 µm, with a predominant droplet population around 7 µm and a narrower polydispersity as the amount of the liquid crystal in the polymeric matrix increases. The resulted PDLC films exhibited versatile morphology and surface properties which allow targeting of their application.     

Optical and Calorimetrical Studies of Liquid Crystalline Materials Doped with Nanoparticles

Summary: Electro-optical properties of Polymer Dispersed Liquid Crystal (PDLC) films doped with different nanoparticles (NPs), as well as optical and morphological properties of liquid crystal/NP mixtures have been investigated. PDLC films were prepared by UV irradiation of thiol-ene monomers and liquid crystal E7 in the presence of a small amount (0.5 and 1 wt.%) of nanoparticles. The presence of NP strongly influence the properties of liquid crystal/NP mixtures. In particular, adding nanoparticles results in a decrease of the glass and nematic-isotropic transition temperatures of the LC, suggesting that strong interactions occur between LC and nanoparticles.     

The investigation of molecular affinity involved in poly(ethylene glycol)-based polymer-dispersed liquid crystal display

Acrylic polyethylene glycol(PEG)-based polymer-dispersed liquid crystal (PDLC) films have been fabricated to investigate the effect of intermolecular interactions on PDLC performance. For this purpose, the amphiphilic liquid crystal and polymers are selected as PDLC composite materials. The acrylic PEG contents are varied from 0 to 66.66 mol wt.% in order to understand the effects of different levels of additions on the microstructure and electro-optical properties of the PDLC films. For this intention, polarized optical microscopy and UV–vis spectroscopy are used. The extent of phase separation and anchoring energy are also examined using Fourier transform infrared (FTIR) spectroscopy and contact angle measurements in consequence of acrylic PEG addition. The contrast ratio, threshold voltage, as well as saturation voltage, tended to increase with the addition of acrylic PEG. The molecular affinity involved in the polymer matrix and LC molecules affected the phase separation which is responsible for the formation of domain size; this accordingly changed the electro-optical properties of PDLC film.     

Use of a precursor solution to fill the gaps between indium tin oxide nanorods, for preparation of three-dimensional CuInGaS2 thin-film solar cells

We have fabricated a three-dimensional (3D) nanostructured indium tin oxide (ITO) film in which the spaces were filled by use of a Cu, In, and Ga precursor solution. This solution has potential for use in bulk heterojunction CuIn _x Ga_1?x S₂ (CIGS) thin-film solar cells. ITO nanorod films ~700 nm thick on glass substrates were synthesized by radio-frequency magnetron sputtering deposition. To ensure complete filling of the gaps in ITO nanorod films, a polymeric binder-free precursor solution was used. In addition, a two-step heating process (oxidation and sulfurization) was used after coating of the precursor solution to make a CIGS absorber film with a minimum of carbon impurities. Superstrate-type solar cell devices with 3D nanostructured films (CIGS–ITO) had a photovoltaic efficiency of 1.11 % despite the absence of a buffer layer (e.g. CdS) between the CIGS and ITO.     

Polymer-dispersed liquid crystal composites for bio-applications: thermotropic,surface and optical properties

Polymer-dispersed liquid crystal (PDLC) systems based on polysulfone as carrying matrix and 4-cyano-4?-pentylbiphenyl (5CB) liquid crystal (LC) were obtained as thin transparent films. The PDLC films were prepared by solvent- and thermally induced phase separation methods, with various compositions in the two components. Information on the phase separation was obtained by polarised light optical microscopy, differential scanning calorimetry and scanning electron microscopy. The PDLC composites show well-defined droplets of submicrometric size, around 650 nm for a medium content of LC and around 250 nm for a low one. The droplets show a radial configuration and a homeotropic alignment of the LC molecules within. By contact angle measurement and surface free energy calculations, it was established that self-assembling of aliphatic units of the two composite components, at droplet interface, is the driving force of the homeotropic alignment. Moreover, these data indicated the potential biocompatibility of the studied composites. The photophysical behaviour shows a better light emission of the PDLCs containing bigger droplets.     

Effects of the fluorinated liquid crystal molecules on the electro-optical properties of polymer dispersed liquid crystal films

The different fluorinated liquid crystal (LC) molecules doped to E8 were used as LC component to prepare polymer dispersed liquid crystal (PDLC) films. The mass fraction of the LC mixture is fixed 50.0 wt%. Results indicate that doping 8.0 wt% fluorinated LC molecule ME3CP to E8 significantly reduced the driving voltage of the PDLC films, and the driving voltage reduced with the rise of mass fraction of ME3CP. Besides, the terminal flexible chain length of the fluorinated LC molecule influenced the LC mixture properties based on E8, such as the dielectric anisotropy, birefringence and viscosity of the LC mixture, and the morphology and the electro-optical properties of PDLC films were controlled not only by the physical properties of the LC mixture, but also by the terminal flexible chain length of the fluorinated LC molecule .     

Facile synthesis of Pd-decorated ZnO nanoparticles for acetone sensors with enhanced performance

ZnO and Pd nanoparticles (NPs) with average diameter of 38 and 10 nm were prepared in advance through a chemical solution method. Pd-functionalized ZnO nanoparticles (Pd@ZnO) were simply synthesized by adding ethanol solution of Pd NPs into ZnO powder, and annealing in argon atmosphere at 500 °C for 1 h after grinding for 30 min. The morphology and structure of the materials were systemically analyzed using Brunauer–Emmett–Teller (BET), X-ray diffraction (XRD), field-emission scanning electron microscopy (FESEM), and transmission electron microscopy (TEM) techniques. A weak peak in the XRD pattern of Pd@ZnO belonging to the (111) plane of elemental Pd indicated successfully loading of Pd. EDS and TEM results further confirmed successfully coating of Pd NPs onto the surface of ZnO. Sensors using ZnO NPs decorated with Pd (1 wt%) on the surface of exhibited highly elevated sensitivity of 76 in comparing with the response of 36 when based on pure ZnO NPs. In addition, such modification also resulted in a decrease in the operating temperature from 370 to 340 °C for 100 ppm acetone vapor. The sensing mechanism of the sensor based on Pd@ZnO NPs is discussed. Addition of Pd NPs can play an important role in improving the performance of gas sensors, including high sensitivity, good selectivity, and short response/recovery times.     

Cyano terminated tolane compounds for polymer dispersed liquid crystal application: relationship between cyano terminated tolane based molecular structures and electro-optical properties

ABSTRACT

The structures of the liquid crystal (LC) molecules have a key role in impacting the electro-optical performance of a polymer dispersed liquid crystal (PDLC) film. In this paper, the relationship between the LC molecular structures and the electro-optical properties of PDLC films is investigated based on an unexplored cyano-terminated tolane compounds (CTTCs) doped E8 LCs/UV polymers system. Due to the high polarity of CTTCs, LCs doped with the cyano-terminated tolane (CTT) molecules exhibit high birefringence and large positive dielectric anisotropy. On the whole, PDLC films doped with the CTT molecules exhibit a lower driving voltage than that doped with the pure E8. More excitingly, PDLC films based on CTT molecules with larger length-to-width ratio and longer conjugated system show higher contrast ratio (CR) and faster response time. Eventually, the mechanism of the effects of CTT-based molecular structures and the relationship between the electro-optical performance of PDLC films and CTT molecules are illustrated. This work paves a new way for optimising the electro-optical properties of PDLC films.     

Tuning percolation speed in layer-by-layer assembled polyaniline–nanocellulose composite films

Polyaniline of low molecular weight (ca. 10 kDa) is combined with cellulose nanofibrils (sisal, 4–5 nm average cross-sectional edge length, with surface sulphate ester groups) in an electrostatic layer-by-layer deposition process to form thin nano-composite films on tin-doped indium oxide (ITO) substrates. AFM analysis suggests a growth in thickness of ca. 4 nm per layer. Stable and strongly adhering films are formed with thickness-dependent coloration. Electrochemical measurements in aqueous H₂SO₄ confirm the presence of two prominent redox waves consistent with polaron and bipolaron formation processes in the polyaniline–nanocellulose composite. Measurements with a polyaniline–nanocellulose film applied across an ITO junction (a 700 nm gap produced by ion beam milling) suggest a jump in electrical conductivity at ca. 0.2 V vs. SCE and a propagation rate (or percolation speed) two orders of magnitude slower compared to that observed in pure polyaniline This effect allows tuning of the propagation rate based on the nanostructure architecture. Film thickness-dependent electrocatalysis is observed for the oxidation of hydroquinone.

     

Electrochromic properties of Prussian blue–polypyrrole composite films in dependence on parameters of synthetic procedure

Composite materials of Prussian blue–polypyrrole (PB/PPy) on the surface of indium tin oxide (ITO)-coated glasses were obtained via one-step chemical (redox) and one-stage electrochemical procedures in mixed solution of iron (III), hexacyanoferrate (III), and pyrrole with various concentration ratios of components in nitrate supporting electrolyte. Electrochemical stability of composite films depends on the amount of Py in synthetic solution, whereas color contrast coefficient values depend on the type of synthetic procedure. PB/PPy film electrochromic response (tested by spectroelectrochemical potentiodynamic measurements) was compared with response of both pure PB and pure PPy films. It was shown that degradation of composite films occurs due to PB component instability in Prussian white form. The highest value of color contrast coefficient and great electrochemical stability were revealed for composite films obtained via redox-synthesis procedure from solution with 0.1 mM [Fe³⁺ + Fe(CN)₆ ^3?] and 1.0 mM Ру (PB/PPy-Ch-1:1:10 system).     

Mechanochemical Synthesis of YFeO<Subscript>3</Subscript> Nanoparticles: Optical and Electrical Properties of Thin Films

Nanoparticles (NPs) of orthorhombic YFeO₃, has been successfully synthesized via an uncomplicated mechanochemical method from yttrium and iron chloride salts in a basic medium. The YFeO₃ NPs were characterized by micro-Raman and Fourier-transform infrared spectroscopy. Their crystalline structure and average diameter of 30 nm was determined from X-ray powder diffraction pattern and by transmission electron microscopy images. Thin films (TF) of these NPs in polystyrene were prepared by spin coating in order to study their electrical and optical properties, as well as to verify their possible application in the manufacture of optoelectronic devices. UV–visible diffuse reflectance was performed for YFeO₃ NPs and for YFeO₃ TF and optical band gaps of 2.38 and 3.7 eV, respectively, were estimated from optical absorption measurements. The electrical conductivity of the YFeO₃ TF was evaluated in a glass/ITO/YFeO ₃ TF/Ag device. At low voltages, electric current in the forward direction was found to obey an ohmic I–V relationship; at higher voltages, the behavior of the film in the device is defined by a Space Charge Limited Current model and, at around 1 V, current saturation. These results suggest the possibility of using YFeO₃ TF in the production of dielectric layers in electronic or optoelectronic devices.     

Effects of functionality of thiol monomer on electro-optical properties of polymer-dispersed liquid crystal films

In this paper, polymer-dispersed liquid crystal (PDLC) films which based on the acrylate and the thiol monomers were first prepared by ultraviolet-initiated polymerisation. The electro-optical properties and morphologies of the PDLC films were systematically investigated. The functionality of thiol monomers and their feed ratio showed great influence on the properties of the fabricated PDLC films because of the existence of competition between thiol–acrylate reaction and acrylate monomer polymerisation reaction. This made the polymer network and electro-optical properties of the PDLC films easily tunable by the introduction of the thiol monomers. When added four-functional thiol monomer PETMP with appropriate concentration into the PDLC system, lower driven voltage and higher contrast ratio were achieved.