MMA／BA无皂乳液聚合机理研究——三阶段成粒机理

用Ｃｏｕｌｔｅｒ ＬＳ２３０激光粒径分析仪研究ＭＭＡ／ＢＡ无皂乳液共聚合中单分散粒子的成粒机理。根据理论和实验数据分析,其成核过程为均相成核机理。根据粒径分布和凿子数变化情况,把无皂乳液聚合过程分为３个阶段,第一阶段为成核－凝聚阶段,体系粒子数密度迅速增加,而粒径变化较小;第二阶段为成核－凝聚,增长 －聚并共存阶段,当粒子数密度开始快速减少时,标志着第一阶段结束,第二阶段开始,当初级凿子开始消失时     

表面活性单体存在下的MMA/BA乳液共聚合(Ⅱ)聚合动力学及机理

研究了表面活性单体[磺化-十二醇-烯丙基甘油-丁二酸酯钠盐(ZC-L)]的用量对MMA/BA/ZC-L乳液聚合速率和粒径的影响,用CoulterLS230型激光粒径分析仪测定聚合过程中乳液的粒径和粒径分布变化,并与MMA/BA无皂乳液聚合及十二烷基苯磺酸钠存在下的MMA/BA乳液聚合作了比较.[ZC-L]CMC时,成核机理包括均相成核和胶束成核机理,生成的粒子因吸收体系中的表面活性单体而稳定存在.     

无皂乳液聚合中单分散粒子的形成过程

在少量双官能团水溶性共单体(磺化丁二酸-聚乙二醇-烯丙基缩水甘油醚酯)存在下进行MMA/BA无皂乳液聚合,用CoulterLS230激光粒径分析仪研究了乳胶粒子的成核机理和单分散粒子的形成过程.乳胶粒子的成粒过程属多步成粒机理:先均相成核,形成不稳定的初始粒子,然后凝聚成稳定乳胶粒,其粒径分布经历了先变宽后变窄的过程,这是聚合过程中成核-凝聚-增长共同作用,相互竞争的结果.它还导致聚合初期出现周期成核的现象.     

MMA—St无皂乳液聚合成核机理探讨

讨论了MMA-St无皂乳液聚合,当[KPS]=2.77×10~(-3)mol/L,[MMA]0.51mol/L,[St]=0.49mol/L,70℃反应5.0小时,能得到较高的聚合转化率,较小的胶乳粒径和较大的粒子浓度,并对不同反应时期聚合物的分子量及其分布进行了测定,认为该无皂乳液聚合体系为均相沉淀成核机理。当转化率大于30.9％时,胶乳粒的凝聚程度大于胶乳粒的生成速度。KPS分解产生的自由基起到了稳定乳液的作用。     

MMA/BA/聚乙二醇马来酸单酯钠盐无皂乳液聚合的成粒机理

研究了在少量聚乙二醇马来酸单酯钠盐存在下,MMA/BA无皂乳液聚合成粒过程,发现聚合初期产生的初级粒子消失后,两次周期性地产生小粒子。经分析,是新的成核作用产生的,表明在聚合的中晚期,成核过程并未真正结束,而是处于成核-聚并的动态平衡之中。     

MMA/BA/双官能团单体无皂共聚乳液的稳定性

用马来酸酐和(聚)乙二醇合成了一系列双官能团共单体,将其用于MMA/BA无皂乳液共聚合.研究了共单体的空间效应、用量、加料方式对其无皂乳液稳定性的影响.用适当的共单体和半连续加料方式,可得到较稳定的乳液,粒径分布接近单分散.凝聚物的生成机理主要是失稳凝聚和架桥凝聚.     

表面活性单体存在下的MMA／BA乳液共聚合（Ⅱ）：聚合动力？…

研究了表面活性单体「磺化－十二醇－烯丙基甘油－丁二酸酯钠盐（ＺＣ－Ｌ）」的用量对ＭＭＡ／ＢＡ／ＺＣ－Ｌ乳液聚合速率和粒径的影响,用Ｃｏｒｌｔｉｒ ＬＳ２３０型激光粒径分析仪测定聚合过程中乳液的粒径和粒径分布变化,并与ＭＭＡ／ＢＡ无皂乳液聚合及十二烷基苯磺酸钠存在下的ＭＭＡ／ＢＡ乳液聚合作了比较。「ＺＣ－Ｌ」〈ＣＭＣ时,成核机理为均相成核机理,乳胶粒需依靠粒子间的凝聚来提高表面电荷密度而稳定;「ＺＣ     

苯乙烯与甲基丙烯酸甲酯在聚乙二醇水溶液中无皂乳液共聚的粒径变化

利用高倍光学显微镜、库尔特粒径测试仪、TEM及zeta电位跟踪观测了苯乙烯(St)与甲基丙烯酸甲酯(MMA)在聚乙二醇(PEG)水溶液无皂乳液共聚过程中的粒径、粒径分布以及zeta电位变化.聚合物粒径会经历由小到大(某些粒径甚至超过1000μm,分布在0.04～2000μm的极宽范围内),再由大变小(形成的数均分布在0.04～0.18μm)过程,且粒径分布也由宽变窄,最终粒径数均分布集中在0.04～0.18μm窄范围内.结合聚合转化率数据,根据PEG水溶液中进行的St/MMA无皂乳液共聚粒径变化过程,以及zeta电位在聚合过程中异于普通无皂乳液的现象,认为该体系在反应初期形成的粒子会形成粒子堆,并随着聚合反应的继续,带有离子片段的自由基链段不断扩散进入粒子堆表面的小粒子,使其zeta电位不断增强,最终脱离粒子堆.提出了PEG水溶液中St/MMA无皂乳液共聚聚并脱析成核机理.     

单分散交联聚（4—乙烯吡啶／丙烯酸丁酯）无皂正电性共聚乳胶

以偶氮二异丙基脒盐酸盐（V50)为引发剂,采用4－乙烯吡啶（4－VP）／丙烯酸丁酯（BA）为混合单体,分别以二乙烯苯（DVB）或双甲基丙烯酸乙二醇酯（EGDMA）为交联剂,用无皂乳液聚合的方法合成了一系列正电性共聚乳液,并用扫描电镜（SEM）、Zeta电位测定仪详细研究了单体配比、交联剂种类和交联度对粒径大小及其分布、粒子形态和乳液电性能的影响,并探讨了该三元无皂乳液聚合的成核机理。结果表明：4VP／BA的无皂乳液聚合遵循均相成核机理。当BA含量低或者微球交联度较小时,高分子亲水性强,临界链长度大,生成粒子数目少,所以粒径大;随着BA含量的增加或者交联度的增大,高分子疏水性增强,临界链长度沽小,生成粒子数目增多,粒径变小,当BA／4VP＝1／4（g/g)时,得到单分散共聚乳胶,少量BA与4VP共聚可以明显提高乳液的稳定性。     

聚硅氧烷/丙烯酸酯核/壳复合胶乳的粒径分布与成核机理

通过种子乳液法合成出具有高有机硅含量核 壳结构的聚硅氧烷 丙烯酸酯复合粒子 .研究了聚合方法、乳化剂浓度、引发剂浓度、单体滴加速度等工艺条件对复合乳液粒径尺寸、分布与形态的影响 ,并对复合乳液的成核机理进行了探讨 .研究表明 ,乳化剂浓度对乳液粒子的粒径分布和形态、结构有显著影响 ,引发剂浓度增加将使粒子粒径减小 ;相对一次投料法 ,种子乳液法生成的粒子分布窄 ,具有明显核壳结构 ,通过壳层单体滴加速度可以控制粒子的粒径尺寸和分布 ;而壳层丙烯酸酯聚合物主要是在聚硅氧烷种子表面的“过渡层”聚合、富集而成 .     

STUDY ON THE FORMATION MECHANISM OF MONODISPERSE PARTICLES IN THE EMULSIFIER-FREE EMULSION POLYMEAIZATION OF METHYL METHACRYLATE AND BUTYL ACRYLATE

The formation mechanism of monodisperse polymer latex particles in the emulsifier-free emulsion polymerizationof methyl methacrylate and butyl acrylate with potassium persulfate as initiator was investigated. A multi-step formationmechanism for the monodisperse polymer particles was proposed. The nucleation mechanism is considered to be thecoagulation of the precursor particles by homogeneous nucleation when the primary particles reach a critical size with highsurface charge density and sufficient stability. It had been proved by a special experiment that the early latex particles formedby the coagulation were stable. The primary particles grow by absorbing monomers and radicals in the polymerization systemand then become colloidally unstable again due to the understandable decrease of particle surface charge density, which leadsto the aggregation of the growing particles and the formation of larger latex pedicles therefrom. Aner the nucleation period,the preferential aggregation of the smaller particles in the propagation process leads to the change of the particles towards auniform size and narrower particle size distribution. The coexistence and competition of homogeneous nucleation,coagulation, propagation and aggregation result in the increase of the polydispersity index (U = D_(43)/D_(10)) in the first Stage,then its decrease in the later stage because of the competition of propagation and aggregation, and the gradual formation ofthe monodisperse particles.     

Kinetics and mechanism of emulsifier-free emulsion copolymerization: Styrene-methyl methacrylate-acrylic acid system

The emulsifier-free emulsion copolymerization of styrene (St) and methyl methacrylate (MMA) in the presence of functional monomer acrylic acid (AA) was carried out in batch process. The kinetics was investigated in detail using model function, Integrated Gamma Function. The morphology and size of particles were monitored continuously by TEM all along the polymerization. It was found that the nucleation, polymerization rate increase with increasing concentration of the functional monomer AA, initiator ammonium persulfate (APS), and polymerization temperature T, and APS plays a predominant role in the particle nucleation process. The particle nucleation stage ceased at about 10% conversion and the steady stage can be extended to about 70% conversion. The particle nucleation is likely to yield primary particle via the mechanism of homogeneous coagulative nucleation and coagulation of the primary particle to yield uniform particles. The particle growth in the postnucleation stage is via a shell growth mechanism. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2649–2656, 1999     

Nucleation in Emulsion Polymerization: Another Step towards Non-Micellar Nucleation Theory

Summary : Comprehensive experimental results of the nucleation stage of styrene emulsion polymerization in the absence as well as in the presence of emulsifier at different concentrations are presented. In addition, the influence of initiator type and presence of seed particles are studied. The nucleation mechanism is verified by means of on-line monitoring of the optical transmission and the conductivity of the aqueous phase. Results prove that micelles do not alter the nucleation mechanism which comprises the initiation of water soluble oligomers in the aqueous phase followed by their aggregation into colloidally stable latex particles. Surfactants assist with nucleation as they lower the activation free energy of particle formation. Contrary, in the presence of seed particles above a critical volume fraction the formation of new particles can be suppressed.     

无乳化剂乳液聚合法合成单分散大粒径高分子微球的研究

无乳化剂乳液聚合法合成单分散大粒径高分子微球的研究朱世雄杜金环金熹高陈柳生（中国科学院化学研究所北京１０００８０）关键词无乳化剂乳液聚合，单分散，均相成核，低聚物胶束微米级大粒径单分散高分子微球在标准计量、情报信息、分析化学等许多领域都有广泛的...