Charge transfer events in semiconducting single-wall carbon nanotubes

Electron-donating ferrocene units have been attached to SWNTs, with different degrees of functionalization. By means of a complementary series of novel spectroscopic techniques (i.e., steady-state and time-resolved), we have documented that mutual interactions between semiconducting SWNT and the covalently attached electron donor (i.e., ferrocene) lead, in the event of photoexcitation, to the formation of radical ion pairs. In the accordingly formed radical ion pairs, oxidation of ferrocene and reduction of SWNT were confirmed by spectroelectrochemistry. It is, however, shown that only a few semiconducting SWNTs [i.e., (9,4), (8,6), (8,7), and (9,7)] are susceptible to photoinduced electron transfer processes. These results are of relevant importance for the development of SWNT-based photovoltaics.     

Exciton binding energy in semiconducting single-walled carbon nanotubes

The exciton binding energy serves as a critical criterion for identification of the nature of elementary excitations (neutral excitons versus a pair of charged carriers) in semiconductor materials. An exciton binding energy of 0.41 eV is determined experimentally for a selected nanotube type, the (8,3) tube, confirming the excitonic nature of the elementary excitations. This determination is made from the energy difference between an electron-hole continuum and its precursor exciton. The electron-hole continuum results from dissociation of excitons following extremely rapid exciton-exciton annihilation and possibly also ultrafast relaxation from the second to the first exciton states and is characterized by distinct spectroscopic and dynamic signatures.     

Pure optical dephasing dynamics in semiconducting single-walled carbon nanotubes

We report a detailed study of ultrafast exciton dephasing processes in semiconducting single-walled carbon nanotubes employing a sample highly enriched in a single tube species, the (6,5) tube. Systematic measurements of femtosecond pump-probe, two-pulse photon echo, and three-pulse photon echo peak shift over a broad range of excitation intensities and lattice temperature (from 4.4 to 292 K) enable us to quantify the timescales of pure optical dephasing (T(2)(*)), along with exciton-exciton and exciton-phonon scattering, environmental effects as well as spectral diffusion. While the exciton dephasing time (T(2)) increases from 205 fs at room temperature to 320 fs at 70 K, we found that further decrease of the lattice temperature leads to a shortening of the T(2) times. This complex temperature dependence was found to arise from an enhanced relaxation of exciton population at lattice temperatures below 80 K. By quantitatively accounting the contribution from the population relaxation, the corresponding pure optical dephasing times increase monotonically from 225 fs at room temperature to 508 fs at 4.4 K. We further found that below 180 K, the pure dephasing rate (1/T(2)(*)) scales linearly with temperature with a slope of 6.7 ± 0.6 μeV/K, which suggests dephasing arising from one-phonon scattering (i.e., acoustic phonons). In view of the large dynamic disorder of the surrounding environment, the origin of the long room temperature pure dephasing time is proposed to result from reduced strength of exciton-phonon coupling by motional narrowing over nuclear fluctuations. This consideration further suggests the occurrence of remarkable initial exciton delocalization and makes nanotubes ideal to study many-body effects in spatially confined systems.     

Raman spectroscopy of free-standing individual semiconducting single-wall carbon nanotubes

The radial breathing modes and tangential modes have been systematically measured on a large number of individual semiconducting single-wall carbon nanotubes (thin bundles) suspended between plots (free-standing single-wall carbon nanotubes). The strong intensity of the Raman spectra ensures the precision of the experimentally determined line shapes and frequencies of these modes. The diameter dependence of the frequencies of the tangential modes was measured. This dependence is discussed in relation with recent calculations. The present data confirm/contradict some previous interpretations.     

Selective interactions of porphyrins with semiconducting single-walled carbon nanotubes

A derivatized porphyrin with long alkyl chains, 5,10,15,20-tetrakis(hexadecyloxyphenyl)-21H,23H-porphine, is selective toward semiconducting single-walled carbon nanotubes (SWNTs) in presumably noncovalent interactions, resulting in significantly enriched semiconducting SWNTs in the solubilized sample and predominantly metallic SWNTs in the residual solid sample according to Raman, near-IR absorption, and bulk conductivity characterizations.     

Large-scale separation of metallic and semiconducting single-walled carbon nanotubes

In the applications of single-walled carbon nanotubes (SWNTs), it is extremely important to separate semiconducting and metallic SWNTs. Although several methods have been reported for the separation, only low yields have been achieved at great expense. We show a separation method involving a dispersion-centrifugation process in a tetrahydrofuran solution of amine, which makes metallic SWNTs highly concentrated to 87% in a simple way.     

Relative optical absorption of metallic and semiconducting single-walled carbon nanotubes

While it is well-known that tube-tube interaction causes changes (peak red-shift and suppression) in the optical absorption of single-walled carbon nanotubes (SWNTs), we found in this work that, upon bundling, the optical absorption of metallic SWNTs (M11) is less affected compared to their semiconducting counterparts (S11 or S22), resulting in enhanced absorbance ratio of metallic and semiconducting SWNTs (A(M)/A(S)). Annealing of the SWNTs increases this ratio due to the intensified tube-tube interaction. We have also found that the interaction between SWNTs and the surfactant Triton X-405 has a similar effect. The evaluation of SWNT separation by types (metallic or semiconducting) based on the optical absorption should take these effects into account.     

Structure-dependent reactivity of semiconducting single-walled carbon nanotubes with benzenediazonium salts

The addition of diazonium salts to single-walled carbon nanotubes (SWCNTs) in aqueous surfactant suspensions quenches the intrinsic near-infrared fluorescence of semiconducting SWCNTs through sidewall chemical reactions. Spectrally resolved fluorescence spectroscopy of mixed SWCNT samples has been used to measure structure-dependent relative reactivities in the initial stages of these reactions. For several 4-substituted benzenediazonium salts, Ar-R (Ar = N 2 (+)-C 6H 4 and R = Cl, NO 2, OMe), reactivities at pH 10 were found to be greatest for SWCNTs having the largest band gaps. The magnitude of this band gap dependence varies according to the R-group of the salt, with R = OMe showing the strongest variation. For R = OH, acidification of the sample to pH 5.5 results in reversal of the structural trend, as smaller band gap SWCNTs show slightly greater reactivities. The derivatization reactions observed here proceed concurrently, although at different rates, for semiconducting and metallic SWCNT species. These results therefore provide insight into the difficulties of separating metallic and semiconducting SWCNTs through selective reaction schemes and underscore the need for fluorescence spectroscopy to be used in assessing semiconducting SWCNT reactions.     

Selective oxidation of semiconducting single-wall carbon nanotubes by hydrogen peroxide

Selective oxidation of single-wall carbon nanotubes (SWCNTs) by H2O2 was conducted at varying heating times and monitored by UV-vis-NIR spectroscopy. A major increase in the relative absorption intensity indicated a higher than 80% concentration of metallic SWCNTs in the final product. Here, it is suggested that semiconducting SWCNTs are more reactive than metallic SWCNTs because of hole-doping by H2O2, resulting in faster oxidation.     

Separated metallic and semiconducting single-walled carbon nanotubes: opportunities in transparent electrodes and beyond

Ever since the discovery of single-walled carbon nanotubes (SWNTs), there have been many reports and predictions on their superior properties for use in a wide variety of potential applications. However, an SWNT is either metallic or semiconducting; these properties are distinctively different in electrical conductivity and many other aspects. The available bulk-production methods generally yield mixtures of metallic and semiconducting SWNTs, despite continuing efforts in metallicity-selective nanotube growth. Presented here are significant advances and major achievements in the development of postproduction separation methods, which are now capable of harvesting separated metallic and semiconducting SWNTs from different production sources with sufficiently high enrichment and quantities for satisfying at least the needs in research and technological explorations. Opportunities and some available examples for the use of metallic SWNTs in transparent electrodes and semiconducting SWNTs in various device nanotechnologies are highlighted and discussed.     

IR-extended photoluminescence mapping of single-wall and double-wall carbon nanotubes

A simple and efficient technique is described for measuring photoluminescence (PL) maps of carbon nanotubes (NTs) in the extended IR range (1-2.3 mum). It consists of preparing an NT/surfactant/gelatin film and measuring PL spectra using a combination of a tunable Ti-sapphire laser excitation and FTIR detection. This procedure has been applied to a wide range of single- and double-wall NTs unveiling chirality and diameter distributions that have so far been very difficult to measure. The problems associated with deducing these distributions are discussed by comparing absorption and PL mapping data for NT samples prepared under different conditions.     

On the origin of preferential growth of semiconducting single-walled carbon nanotubes

A correlation is observed between the diameters (d) of single-walled carbon nanotubes and the percentages of metallic and semiconducting tubes synthesized at 600 degrees C by plasma-assisted chemical vapor deposition. Small tubes (d approximately 1.1 nm) show semiconductor percentages that are much higher than expected for a random chirality distribution. Density functional theory calculations reveal differences in the heat of formation energies for similar-diameter metallic, quasi-metallic, and semiconducting nanotubes. Semiconducting tubes exhibit the lowest energies and the stabilization scales with approximately 1/d(2). This could be a thermodynamic factor in the preferential growth of small semiconducting nanotubes.     

Selective polycarboxylation of semiconducting single-walled carbon nanotubes by reductive sidewall functionalization

The efficient and controllable synthesis, the detailed characterization, and the chemical postfunctionalization of polycarboxylated single-walled carbon nanotubes SWCNT(COOH)(n) are reported. This innovative covalent sidewall functionalization method is characterized by (a) the preservation of the integrity of the entire σ-framework of SWCNTs; (b) the possibility of achieving very high degrees of addition; (c) control of the functionalization degrees by the variation of the reaction conditions (reaction time, ultrasonic treatment, pressure); (d) the identification of conditions for the selective functionalization of semiconducting carbon nanotubes, leaving unfunctionalized metallic tubes behind; (e) the proof that the introduced carboxylic acid functionalities can serve as versatile anchor points for the coupling to functional molecules; and (f) the application of a subsequent thermal degradation step of the functionalized semiconducting tubes leaving behind intact metallic SWCNTs. Functional derivatives have been characterized in detail by means of Raman, UV-vis/nIR, IR, and fluorescence spectroscopy as well as by thermogravimetric analysis combined with mass spectrometry, atomic force microscopy, and zeta-potential measurements.     

Temperature effects on femtosecond transient absorption kinetics of semiconducting single-walled carbon nanotubes

We report femtosecond transient absorption kinetics measured for selected semiconducting single-walled carbon nanotubes at different temperatures between 77 and 290 K. The nanotubes are embedded in a thin polymethylmethacrylate film, and the dominance of individual species enabled to probe selectively the kinetics associated with two desired tube types, the (6,5) and (7,5) tubes. A strikingly similar temperature dependence is found between the maximum change in the amplitude of transient absorption kinetics, the overall decay time and steady-state fluorescence emission intensity. The simplest explanation for our data is that the temperature dependence of the fluorescence intensity and the exciton decay kinetics are dominated by nonradiative decay and that the radiative decay rate is weakly temperature dependent.     

Selective Diels-Alder cycloaddition on semiconducting single-walled carbon nanotubes for potential separation application

Selectivity for the Diels-Alder cycloaddition reaction of the electron-rich diene with single-walled carbon nanotubes was first investigated. This chemistry is a complete departure from the curvature-dependent reactivity based on the carbon pyramidalization angle.     

A route for bulk separation of semiconducting from metallic single-wall carbon nanotubes

Substantial separation of single-wall carbon nanotubes (SWNTs) according to type (metallic versus semiconducting) has been achieved for HiPco and laser-ablated SWNTs. We presently argue that stable dispersions of SWNTs with octadecylamine (ODA) in tetrahydrofuran (THF) originate from the physisorption and organization of ODA along the SWNT sidewalls in addition to the originally proposed zwitterion model. Furthermore, the reported affinity of amine groups for semiconducting SWNTs, as opposed to their metallic counterparts, contributes additional stability to the physisorbed ODA. This provides a venue for the selective precipitation of metallic SWNTs upon increasing dispersion concentration, as indicated by Raman investigations.     

Communication: electronic band gaps of semiconducting zig-zag carbon nanotubes from many-body perturbation theory calculations

Electronic band gaps for optically allowed transitions are calculated for a series of semiconducting single-walled zig-zag carbon nanotubes of increasing diameter within the many-body perturbation theory GW method. The dependence of the evaluated gaps with respect to tube diameters is then compared with those found from previous experimental data for optical gaps combined with theoretical estimations of exciton binding energies. We find that our GW gaps confirm the behavior inferred from experiment. The relationship between the electronic gap and the diameter extrapolated from the GW values is also in excellent agreement with a direct measurement recently performed through scanning tunneling spectroscopy.     

Structural characterization and diameter-dependent oxidative stability of single wall carbon nanotubes synthesized by the catalytic decomposition of CO

Low T oxidation followed by brief sonication in hot HCl has been optimized to remove Fe catalyst residues from HiPco material with minimal loss of tubes. One pass reduces Fe from 6–10 to 0.6–1.6 at.% with 60% yield, most of the loss being Fe. Raman scattering reveals a broad diameter distribution with a mean of 1.0–1.1 nm. After purification we find excellent correlation between oxidation temperature and Raman spectra whereby the oxidation rate varies inversely with tube diameter. This can be explained by the larger strain associated with greater curvature of small tubes.     

Separation of semiconducting from metallic carbon nanotubes by selective functionalization with azomethine ylides

A mild and efficient method for the functionalization of SWNTs by cycloaddition of azomethine ylides derived from trialkylamine-N-oxides is described. Selective reaction of semiconducting carbon nanotubes was achieved by preorganizing the starting N-oxides on the nanotube surface prior to generating the reactive ylides. Separation of met-SWNTs from functionalized sem-SWNTs was successfully accomplished by inducing solubilization of sem-SWNTs in the presence of lignoceric acid.