Site-specific doping of silver atoms into a Au25 nanocluster as directed by ligand binding preferences

For the first time site-specific doping of silver into a spherical Au₂₅ nanocluster has been achieved in [Au₁₉Ag₆(MeOPhS)₁₇(PPh₃)₆] (BF₄)₂ (Au₁₉Ag₆) through a dual-ligand coordination strategy. Single crystal X-ray structural analysis shows that the cluster has a distorted centered icosahedral Au@Au₆Ag₆ core of D₃ symmetry, in contrast to the I_h Au@Au₁₂ kernel in the well-known [Au₂₅(SR)₁₈]⁻ (R = CH₂CH₂Ph). An interesting feature is the coexistence of [Au₂(SPhOMe)₃] dimeric staples and [P–Au–SPhOMe] semi-staples in the title cluster, due to the incorporation of PPh₃. The observation of only one double-charged peak in ESI-TOF-MS confirms the ordered doping of silver atoms. Au₁₉Ag₆ is a 6e system showing a distinct absorption spectrum from [Au₂₅(SR)₁₈]⁻, that is, the HOMO–LUMO transition of Au₁₉Ag₆ is optically forbidden due to the P character of the superatomic frontier orbitals.

For the first time site-specific doping of silver into a spherical Au₂₅ nanocluster has been achieved in [Au₁₉Ag₆(MeOPhS)₁₇(PPh₃)₆] (BF₄)₂. It is a 6e system showing quite a different absorption spectrum from [Au₂₅(SR)₁₈]⁻.     

Aurophilic Interactions in the Self‐Assembly of Gold Nanoclusters into Nanoribbons with Enhanced Luminescence

Aurophilic interactions (Au^I???Au^I) are crucial in directing the supramolecular self‐assembly of many gold(I) compounds; however, this intriguing chemistry has been rarely explored for the self‐assembly of nanoscale building blocks. Herein, we report on studies on aurophilic interactions in the structure‐directed self‐assembly of ultrasmall gold nanoparticles or nanoclusters (NCs, <2 nm) using [Au₂₅(SR)₁₈]^? (SR=thiolate ligand) as a model cluster. The self‐assembly of NCs is initiated by surface‐motif reconstruction of [Au₂₅(SR)₁₈]^? from short SR‐[Au^I‐SR]₂ units to long SR‐[Au^I‐SR]_x (x>2) staples accompanied by structure modification of the intrinsic Au₁₃ kernel. Such motif reconstruction increases the content of Au^I species in the protecting shell of Au NCs, providing the structural basis for directed aurophilic interactions, which promote the self‐assembly of Au NCs into well‐defined nanoribbons in solution. More interestingly, the compact structure and effective aurophilic interactions in the nanoribbons significantly enhance the luminescence intensity of Au NCs with an absolute quantum yield of 6.2 % at room temperature.     

Selective formation of [Au23(SPhtBu)17]0, [Au26Pd(SPhtBu)20]0 and [Au24Pt(SC2H4Ph)7(SPhtBu)11]0 by controlling ligand-exchange reaction

To use atomically precise metal nanoclusters (NCs) in various application fields, it is essential to establish size-selective synthesis methods for the metal NCs. Studies on thiolate (SR)-protected gold NCs (Au_n(SR)_m NCs) revealed that the atomically precise Au_n(SR)_m NC, which has a different chemical composition from the precursor, can be synthesized size-selectively by inducing transformation in the framework structure of the metal NCs by a ligand-exchange reaction. In this study, we selected the reaction of [Au₂₅(SC₂H₄Ph)₁₈]⁻ (SC₂H₄Ph = 2-phenylethanethiolate) with 4-tert-butylbenzenethiol (^tBuPhSH) as a model ligand-exchange reaction and attempted to obtain new metal NCs by changing the amount of thiol, the central atom of the precursor NCs, or the reaction time from previous studies. The results demonstrated that [Au₂₃(SPh^tBu)₁₇]⁰, [Au₂₆Pd(SPh^tBu)₂₀]⁰ (Pd = palladium) and [Au₂₄Pt(SC₂H₄Ph)₇(SPh^tBu)₁₁]⁰ (Pt = platinum) were successfully synthesized in a high proportion. To best of our knowledge, no report exists on the selective synthesis of these three metal NCs. The results of this study show that a larger variety of metal NCs could be synthesized size-selectively than at present if the ligand-exchange reaction is conducted while changing the reaction conditions and/or the central atoms of the precursor metal NCs from previous studies.

This study succeeded in obtaining three new thiolate protected metal nanoclusters by changing the ligand-exchange condition from previous studies.     

Atomic‐Level Alloying and De‐alloying in Doped Gold Nanoparticles

Atomically precise alloying and de‐alloying processes for the formation of Ag–Au and Cu–Au nanoparticles of 25‐metal‐atom composition (referred to as Ag_xAu_25?x(SR)₁₈ and Cu_xAu_25?x(SR)₁₈, in which R=CH₂CH₂Ph) are reported. The identities of the particles were determined by matrix‐assisted laser desorption ionization mass spectroscopy (MALDI‐MS). Their structures were probed by fragmentation analysis in MALDI‐MS and comparison with the icosahedral structure of the homogold Au₂₅(SR)₁₈ nanoparticles (an icosahedral Au₁₃ core protected by a shell of Au₁₂(SR)₁₈). The Cu and Ag atoms were found to preferentially occupy the 13‐atom icosahedral sites, instead of the exterior shell. The number of Ag atoms in Ag_xAu_25?x(SR)₁₈ (x=0–8) was dependent on the molar ratio of Ag^I/Au^III precursors in the synthesis, whereas the number of Cu atoms in Cu_xAu_25?x(SR)₁₈ (x=0–4) was independent of the molar ratio of Cu^II/Au^III precursors applied. Interestingly, the Cu_xAu_25?x(SR)₁₈ nanoparticles show a spontaneous de‐alloying process over time, and the initially formed Cu_xAu_25?x(SR)₁₈ nanoparticles were converted to pure Au₂₅(SR)₁₈. This de‐alloying process was not observed in the case of alloyed Ag_xAu_25?x(SR)₁₈ nanoparticles. This contrast can be attributed to the stability difference between Cu_xAu_25?x(SR)₁₈ and Ag_xAu_25?x(SR)₁₈ nanoparticles. These alloyed nanoparticles are promising candidates for applications such as catalysis.     

Structure of the Au23−xAgx(S‐Adm)15 Nanocluster and Its Application for Photocatalytic Degradation of Organic Pollutants

Ligands play an important role in determining the atomic arrangement within the metal nanoclusters. Here, we report a new nanocluster [Au_23?xAg_x(S‐Adm)₁₅] protected by bulky adamantanethiol ligands which was obtained through a one‐pot synthesis. The total structure of [Au_23?xAg_x(S‐Adm)₁₅] comprises an Au_13?xAg_x icosahedral core, three Au₃(SR)₄ units, and one AgS₃ staple motif in contrast to the 15‐atom bipyramidal core previously seen in [Au_23?xAg_x(SR)₁₆]. UV/Vis spectroscopy indicates that the HOMO–LUMO gap of [Au_23?xAg_x(S‐Adm)₁₅] is 1.5 eV. DFT calculations reveal that [Au₁₉Ag₄(S‐Adm)₁₅] is the most stable structure among all structural possibilities. Benefitting from Ag doping, [Au_23?xAg_x(S‐Adm)₁₅] exhibits drastically improved photocatalytic activity for the degradation of rhodamine B (RhB) and phenol under visible‐light irradiation compared to Au₂₃ nanoclusters.     

Hollow Versus Hydrogen-Occupied Icosahedral Cages of Coinage–Metal Clusters

It is suggested that the hollow coinage–metal icosahedral cage of the [Ag₄₄(SR)₃₀]^4? tetraanion (1a) may be occupied by two hydrogen atoms, giving rise to a dihydridic cluster [H₂Ag₄₄(SR)₃₀]^4? tetraanion (2b). As a consequence, two series of clusters, with different electron counts, can be formed by chemical means: the 18-electron series [H _x Ag₄₄(SR)₃₀]^(4?x)? via stepwise protonation of 1a and the 20-electron series [H _x Ag₄₄(SR)₃₀]^(6?x)? via stepwise deprotonation of 2b (here x = 0, 1, 2). Both series are closed-shell Jelliumatic clusters and expected to be stable. The corresponding members of these two series (for a given x value) are related by a two-electron reduction. These pairs raise the possibility of the hollow icosahedral metal cages in housing a number of hydrogen atoms, either via stepwise protonations or by absorption of hydrogen molecules.     

A New Synthetic Methodology in the Preparation of Bimetallic Chalcogenide Clusters via Cluster-to-Cluster Transformations

A decanuclear silver chalcogenide cluster, [Ag₁₀(Se){Se₂P(OⁱPr)₂}₈] (2) was isolated from a hydride-encapsulated silver diisopropyl diselenophosphates, [Ag₇(H){Se₂P(OⁱPr)₂}₆], under thermal condition. The time-dependent NMR spectroscopy showed that 2 was generated at the first three hours and the hydrido silver cluster was completely consumed after thirty-six hours. This method illustrated as cluster-to-cluster transformations can be applied to prepare selenide-centered decanuclear bimetallic clusters, [Cu_xAg_10-x(Se){Se₂P(OⁱPr)₂}₈] (x = 0–7, 3), via heating [Cu_xAg_7−x(H){Se₂P(OⁱPr)₂}₆] (x = 1–6) at 60 °C. Compositions of 3 were accurately confirmed by the ESI mass spectrometry. While the crystal 2 revealed two un-identical [Ag₁₀(Se){Se₂P(OⁱPr)₂}₈] structures in the asymmetric unit, a co-crystal of [Cu₃Ag₇(Se){Se₂P(OⁱPr)₂}₈]_0.6[Cu₄Ag₆(Se){Se₂P(OⁱPr)₂}₈]_0.4 ([3a]_0.6[3b]_0.4) was eventually characterized by single-crystal X-ray diffraction. Even though compositions of 2, [3a]_0.6[3b]_0.4 and the previous published [Ag₁₀(Se){Se₂P(OEt)₂}₈] (1) are quite similar (10 metals, 1 Se²⁻, 8 ligands), their metal core arrangements are completely different. These results show that different synthetic methods by using different starting reagents can affect the structure of the resulting products, leading to polymorphism.     

Templated Atom‐Precise Galvanic Synthesis and Structure Elucidation of a [Ag24Au(SR)18]− Nanocluster

Synthesis of atom‐precise alloy nanoclusters with uniform composition is challenging when the alloying atoms are similar in size (for example, Ag and Au). A galvanic exchange strategy has been devised to produce a compositionally uniform [Ag₂₄Au(SR)₁₈]^? cluster (SR: thiolate) using a pure [Ag₂₅(SR)₁₈]^? cluster as a template. Conversely, the direct synthesis of Ag₂₄Au cluster leads to a mixture of [Ag_25?xAu_x(SR)₁₈]^?, x=1–8. Mass spectrometry and crystallography of [Ag₂₄Au(SR)₁₈]^? reveal the presence of the Au heteroatom at the Ag₂₅ center, forming Ag₂₄Au. The successful exchange of the central Ag of Ag₂₅ with Au causes perturbations in the Ag₂₅ crystal structure, which are reflected in the absorption, luminescence, and ambient stability of the particle. These properties are compared with those of Ag₂₅ and Ag₂₄Pd clusters with same ligand and structural framework, providing new insights into the modulation of cluster properties with dopants at the single‐atom level.     

[N(PPh3)2]2[{Au3Ag2(C2Ph)6} {Au3Cu2(Cu2Ph)6}]: Co-crystallized pentanuclear bimetallic gold-silver and gold-copper clusters

The X-ray structural study of the reaction product of equimolar amounts of [Au₃Cu₂(C₂Ph)₆]. [{Au(C₂Ph)} _n ], and [Ag(C₂Ph)} _n ] revealed two bimetallic anionic [N(PPh₃)₂] + [Au₃Ag₂(C₂Ph)₆]^– and [N(PPh₃)₂]⁺[Au₃Cu₂ (C₂ Pg)₆] — clusters co-crystallized in one asymmetric unit. Each cluster has trigonal bipyramidal geometry with three gold atoms occupying equatorial planes and two silver or copper atoms in the apical positions. Our earlier conclusion based upon spectroscopic characterization describing the product of be above reaction as trimetallic cluster containing three coinage-metals with an overall composition [Au₃CuAg(C₂Ph)₆]^–, was erroneous.Presented at the 210th ACS Meeting, August 19–24, 1995, Chicago, Illinois.     

Fabrication of a family of atomically precise silver nanoclusters via dual-level kinetic control

The controllable preparation of metal nanoclusters in high yield is an essential prerequisite for their fundamental research and extensive application. Here a synthetic approach termed “dual-level kinetic control” was developed to fabricate a family of new silver nanoclusters. The introduction of secondary ligands was first exploited to retard the reduction rate and accomplish the first-level kinetic control. And the cooling of the reaction was performed to further slow the reduction down and accomplish the second-level kinetic control. A family of atomically precise silver nanoclusters (including [Ag₂₅(SR)₁₈]⁻, [Ag₃₄(SR)₁₈(DPPP)₃Cl₄]²⁺, [Ag₃₆(SR)₂₆S₄]²⁺, [Ag₃₇(SR)₂₅Cl₁]⁺, and [Ag₅₂(SR)₂₈Cl₄]²⁺) were controllably prepared and structurally determined. The developed “dual-level kinetic control” hopefully acts as a powerful synthetic tool to manufacture more nanoclusters with unprecedented compositions, structures, and properties.

A dual-level kinetic control was exploited to fabricate a family of atomically precise silver nanoclusters.     

Metal–metal bonded alkaline-earth distannyls

The first families of alkaline-earth stannylides [Ae(SnPh₃)₂·(thf)_x] (Ae = Ca, x = 3, 1; Sr, x = 3, 2; Ba, x = 4, 3) and [Ae{Sn(SiMe₃)₃}₂·(thf)_x] (Ae = Ca, x = 4, 4; Sr, x = 4, 5; Ba, x = 4, 6), where Ae is a large alkaline earth with direct Ae–Sn bonds, are presented. All complexes have been characterised by high-resolution solution NMR spectroscopy, including ¹¹⁹Sn NMR, and by X-ray diffraction crystallography. The molecular structures of [Ca(SnPh₃)₂·(thf)₄] (1′), [Sr(SnPh₃)₂·(thf)₄] (2′), [Ba(SnPh₃)₂·(thf)₅] (3′), 4, 5 and [Ba{Sn(SiMe₃)₃}₂·(thf)₅] (6′), most of which crystallised as higher thf solvates than their parents 1–6, were established by XRD analysis; the experimentally determined Sn–Ae–Sn′ angles lie in the range 158.10(3)–179.33(4)°. In a given series, the ¹¹⁹Sn NMR chemical shifts are slightly deshielded upon descending group 2 from Ca to Ba, while the silyl-substituted stannyls are much more shielded than the phenyl ones (δ¹¹⁹Sn/ppm: 1′, −133.4; 2′, −123.6; 3′, −95.5; 4, −856.8; 5, −848.2; 6′, −792.7). The bonding and electronic properties of these complexes were also analysed by DFT calculations. The combined spectroscopic, crystallographic and computational analysis of these complexes provide some insight into the main features of these unique families of homoleptic complexes. A comprehensive DFT study (Wiberg bond index, QTAIM and energy decomposition analysis) points at a primarily ionic Ae–Sn bonding, with a small covalent contribution, in these series of complexes; the Sn–Ae–Sn′ angle is associated with a flat energy potential surface around its minimum, consistent with the broad range of values determined by experimental and computational methods.

The complete series of heterobimetallic alkaline-earth distannyls [Ae{SnR₃}₂·(thf)_x] (Ae = Ca, Sr, Ba) have been prepared for R = Ph and SiMe₃, and their bonding and electronic properties have been comprehensively investigated.     

Atomically Precise Alloy Nanoclusters

Metal nanoclusters (NCs) have a particle size of about one nanometer, which makes them the smallest unit that can give a function to a substance. In addition, metal NCs possess physical and chemical properties that are different from those of the corresponding bulk metals. Metal NCs with such characteristics are expected to be important for use in nanotechnology. Research on the precise synthesis of metal NCs and elucidation of their physical/chemical properties and functions is being actively conducted. When metal NCs are alloyed, it is possible to obtain further various electronic and geometrical structures and functions. Thus, research on alloy NCs has become a hot topic in the study of metal NCs and the number of publications on alloy NCs has increased explosively in recent years. Such publications have provided much insight into the effects of alloying on the electronic structure and function of metal NCs. However, the rapid increase in knowledge has made it difficult for researchers (especially those new to the field) to grasp all of it. Therefore, in this review, we summarize the reported chemical composition, geometrical structure, electronic structure, and physical and chemical properties of Au_n−xM_x(SR)_m, Ag_n−xM_x(SR)_m, Au_n−xM_x(PR₃)_l(SR)_m, and Ag_n−xM_x(PR₃)_l(SR)_m (Au=gold, Ag=silver, M=heteroatom, PR₃=phosphine, and SR=thiolate) NCs. This review is expected to help researchers understand the characteristics of alloy NCs and lead to clear design guidelines to develop new alloy NCs with intended functions.     

Galvanic replacement synthesis of AgxAu1–x@CeO2 (0 ≤ x ≤ 1) core@shell nanospheres with greatly enhanced catalytic performance

A galvanic replacement strategy has been successfully adopted to design Ag_xAu_1–x@CeO₂ core@shell nanospheres derived from Ag@CeO₂ ones. After etching using HAuCl₄, the Ag core was in situ replaced with Ag_xAu_1–x alloy nanoframes, and void spaces were left under the CeO₂ shell. Among the as-prepared Ag_xAu_1–x@CeO₂ catalysts, Ag_0.64Au_0.36@CeO₂ shows the optimal catalytic performance, whose catalytic efficiency reaches even 2.5 times higher than our previously reported Pt@CeO₂ nanospheres in the catalytic reduction of 4-nitrophenol (4-NP) by ammonia borane (AB). Besides, Ag_0.64Au_0.36@CeO₂ also exhibits a much lower 100% conversion temperature of 120 °C for catalytic CO oxidation compared with the other samples.     

An insight,at the atomic level,into the polarization effect in controlling the morphology of metal nanoclusters

The polarization effect has been a powerful tool in controlling the morphology of metal nanoparticles. However, a precise investigation of the polarization effect has been a challenging pursuit for a long time, and little has been achieved for analysis at the atomic level. Here the atomic-level analysis of the polarization effect in controlling the morphologies of metal nanoclusters is reported. By simply regulating the counterions, the controllable transformation from Pt₁Ag₂₈(S-PhMe₂)_x(S-Adm)_18−x(PPh₃)₄ (x = 0–6, Pt1Ag28-2) to Pt₁Ag₂₄(S-PhMe₂)₁₈ (Pt1Ag24) with a spherical configuration or to Pt₁Ag₂₈(S-Adm)₁₈(PPh₃)₄ (Pt1Ag28-1) with a tetrahedral configuration has been accomplished. In addition, the spherical or tetrahedral configuration of the clusters could be reversibly transformed by re-regulating the proportion of counterions with opposite charges. More significantly, the configuration transformation rate has been meticulously manipulated by regulating the polarization effect of the ions on the parent nanoclusters. The observations in this paper provide an intriguing nanomodel that enables the polarization effect to be understood at the atomic level.

Based on the inter-conversion between Pt₁Ag₂₄(SR)₁₈ and Pt₁Ag₂₈(SR)₁₈(PPh₃)₄, an insight into the polarization effect in controlling the morphology of metal nanoparticles is presented.     

Atomically Tailored Gold Nanoclusters for Catalytic Application

Recent advances in the synthetic chemistry of atomically precise metal nanoclusters (NCs) have significantly broadened the accessible sizes and structures. Such particles are well defined and have intriguing properties, thus, they are attractive for catalysis. Especially, those NCs with identical size but different core (or surface) structure provide unique opportunities that allow the specific role of the core and the surface to be mapped out without complication by the size effect. Herein, we summarize recent work with isomeric Au_n NCs protected by ligands and isostructural NCs but with different surface ligands. The highlighted work includes catalysis by spherical and rod‐shaped Au₂₅ (with different ligands), quasi‐isomeric Au₂₈(SR)₂₀ with different R groups, structural isomers of Au₃₈(SR)₂₄ (with identical R) and Au₃₈S₂(SR)₂₀ with body‐centred cubic (bcc) structure, and isostructural [Au₃₈L₂₀(PPh₃)₄]²⁺ (different L). These isomeric and/or isostructural NCs have provided valuable insights into the respective roles of the kernel, surface staples, and the type of ligands on catalysis. Future studies will lead to fundamental advances and development of tailor‐made catalysts.     

Unraveling the Impact of Gold(I)–Thiolate Motifs on the Aggregation‐Induced Emission of Gold Nanoclusters

Aggregation‐induced emission (AIE) provides an efficient strategy to synthesize highly luminescent metal nanoclusters (NCs), however, rational control of emission energy and intensity of metal NCs is still challenging. This communication reveals the impact of surface Au^I‐thiolate motifs on the AIE properties of Au NCs, by employing a series of water‐soluble glutathione (GSH)‐coordinated Au complexes and NCs as a model ([Au₁₀SR₁₀], [Au₁₅SR₁₃], [Au₁₈SR₁₄], and [Au₂₅SR₁₈]^?, SR=thiolate ligand). Spectroscopic investigations show that the emission wavelength of Au NCs is adjustable from visible to the near‐infrared II (NIR‐II) region by controlling the length of the Au^I‐SR motifs on the NC surface. Decreasing the length of Au^I‐SR motifs also changes the origin of cluster luminescence from AIE‐type phosphorescence to Au⁰‐core‐dictated fluorescence. This effect becomes more prominent when the degree of aggregation of Au NCs increases in solution.     

Rapid Conversion of a Au9Ag12 into a AuxAg16-x Nanocluster via Bisphosphine Ligand Engineering

The [Au_xAg_16-x(SAdm)₈(Dppe)₂] nanocluster with aggregation-induced emission (AIE) was synthesized from a non-fluorescent [Au₉Ag₁₂(SAdm)₄(Dppm)₆Cl₆](SbF₆)₃ nanocluster via a ligand-exchange engineering (Dppe=1,2-Bis(diphenylphosphino)ethane, Dppm=Bis(diphenylphosphino)methane, HSAdm=1-Adamantanethiol). The nanocluster has a Au-doped icosahedral Au_xAg_13-x core, capped by two Ag(SR)₃, one Ag(SR)₂ and two Dppe ligands. By changing the achiral Dppe ligand into a chiral dbpb ligand ((2S,3S)-(-)-Bis(diphenylphosphino)butane or (2R,3R)-(+)-2,3-Bis(diphenylphosphino)butane), chiral nanoclusters are obtained. ESI-MS and UV-vis spectroscopy were performed to track the reaction. This work provides guidance for the construction of new clusters by etching clusters with multidentate phosphine ligands.     

High‐Level Incorporation of Silver in Gold Nanoclusters: Fluorescence Redshift upon Interaction with Hydrogen Peroxide and Fluorescence Enhancement with Herbicide

High‐level incorporation of Ag in Au nanoclusters (NCs) is conveniently achieved by controlling the concentration of Ag⁺ in the synthesis of bovine serum albumin (BSA)‐protected Au NCs, and the resulting structure is determined to be bimetallic Ag₂₈Au₁₀‐BSA NCs through a series of characterizations including energy‐dispersive X‐ray spectroscopy, mass spectroscopy, and X‐ray photoelectron spectroscopy, together with density functional theory simulations. Interestingly, the Ag₂₈Au₁₀ NCs exhibit a significant fluorescence redshift rather than quenching upon interaction with hydrogen peroxide, providing a new approach to the detection of hydrogen peroxide through direct comparison of their fluorescence peaks. Furthermore, the Ag₂₈Au₁₀ NCs are also used for the sensitive and selective detection of herbicide through fluorescence enhancement. The detection limit for herbicide (0.1 nm ) is far below the health value established by the U.S. Environmental Protection Agency; such sensitive detection was not achieved by using AuAg NCs with low‐level incorporation of Ag or by using the individual metal NCs.     

Modelling local structural and electronic consequences of proton and hydrogen-atom uptake in VO2 with polyoxovanadate clusters

We report the synthesis and characterisation of a series of siloxide-functionalised polyoxovanadate–alkoxide (POV–alkoxide) clusters, [V₆O₆(OSiMe₃)(OMe)₁₂]ⁿ (n = 1−, 2−), that serve as molecular models for proton and hydrogen-atom uptake in vanadium dioxide, respectively. Installation of a siloxide moiety on the surface of the Lindqvist core was accomplished via addition of trimethylsilyl trifluoromethylsulfonate to the fully-oxygenated cluster [V₆O₇(OMe)₁₂]²⁻. Characterisation of [V₆O₆(OSiMe₃)(OMe)₁₂]¹⁻ by X-ray photoelectron spectroscopy reveals that the incorporation of the siloxide group does not result in charge separation within the hexavanadate assembly, an observation that contrasts directly with the behavior of clusters bearing substitutional dopants. The reduced assembly, [V₆O₆(OSiMe₃)(OMe)₁₂]²⁻, provides an isoelectronic model for H-doped VO₂, with a vanadium(iii) ion embedded within the cluster core. Notably, structural analysis of [V₆O₆(OSiMe₃)(OMe)₁₂]²⁻ reveals bond perturbations at the siloxide-functionalised vanadium centre that resemble those invoked upon H-atom uptake in VO₂ through ab initio calculations. Our results offer atomically precise insight into the local structural and electronic consequences of the installation of hydrogen-atom-like dopants in VO₂, and challenge current perspectives of the operative mechanism of electron–proton co-doping in these materials.

We report the synthesis and characterisation of a series of siloxide-functionalised polyoxovanadate–alkoxide clusters, [V₆O₆(OSiMe₃)(OMe)₁₂]ⁿ (n = 1⁻, 2⁻), that serve as molecular models for proton and hydrogen-atom uptake in vanadium dioxide.     

Unraveling the Impact of Gold(I)–Thiolate Motifs on the Aggregation-Induced Emission of Gold Nanoclusters

Aggregation-induced emission (AIE) provides an efficient strategy to synthesize highly luminescent metal nanoclusters (NCs), however, rational control of emission energy and intensity of metal NCs is still challenging. This communication reveals the impact of surface Au^I-thiolate motifs on the AIE properties of Au NCs, by employing a series of water-soluble glutathione (GSH)-coordinated Au complexes and NCs as a model ([Au₁₀SR₁₀], [Au₁₅SR₁₃], [Au₁₈SR₁₄], and [Au₂₅SR₁₈]⁻, SR=thiolate ligand). Spectroscopic investigations show that the emission wavelength of Au NCs is adjustable from visible to the near-infrared II (NIR-II) region by controlling the length of the Au^I-SR motifs on the NC surface. Decreasing the length of Au^I-SR motifs also changes the origin of cluster luminescence from AIE-type phosphorescence to Au⁰-core-dictated fluorescence. This effect becomes more prominent when the degree of aggregation of Au NCs increases in solution.