Infrared study of intercomponent interactions in a switchable hydrogen-bonded rotaxane

The macrocycle in rotaxane 1 is preferentially hydrogen bonded to the succinamide station in the neutral form, but can be moved to the naphthalimide station by one-electron reduction of the latter. The hydrogen bonding between the amide NH groups of the macrocycle and the C double bond O groups in the binding stations in the thread was studied with IR spectroscopy in different solvents in both states. In addition, the solvent effect on the vibrational frequencies was analyzed; a correlation with the solvent acceptor number (AN) was observed. The conformational switching upon reduction could be detected by monitoring the hydrogen-bond-induced shifts of the nu(CO) frequencies of the C double bond O groups of the succinamide and the reduced naphthalimide stations. The macrocycle was found to shield the encapsulated station from the solvent: wavenumbers of nu(CO) bands of the C double bond O groups residing inside the macrocycle cavity remain unaffected by the solvent polarity.     

Electrochemically switchable hydrogen-bonded molecular shuttles

A series of [2]rotaxanes containing succinamide and naphthalimide hydrogen-bonding stations for a benzylic amide macrocycle is described. Electrochemical reduction and oxidation of the naphthalimide group alters its ability to form hydrogen bonds to the macrocycle to such a degree that redox processes can be used to switch the relative macrocycle-binding affinities of the two stations in a rotaxane by over 8 orders of magnitude. The structure of the neutral [2]rotaxane in solution is established by (1)H NMR spectroscopy and shows that the macrocycle exhibits remarkable positional integrity for the succinamide station in a variety of solvents. Cyclic voltammetry experiments allow the simultaneous stimulation and observation of a redox-induced dynamic process in the rotaxane which is both reversible and cyclable. Model compounds in which various conformational and co-conformational changes are prohibited demonstrate unequivocally that the redox response is the result of shuttling of the macrocycle between the two stations. At room temperature in tetrahydrofuran the electrochemically induced movement of the macrocycle between the two stations takes approximately 50 micros.     

Induction of Motion in a Synthetic Molecular Machine: Effect of Tuning the Driving Force

Rotaxane molecular shuttles were studied in which a tetralactam macrocyclic ring moves between a succinamide station and a second station in which the structure is varied. Station 2 in all cases is an aromatic imide, which is a poor hydrogen‐bond acceptor in the neutral form, but a strong one when reduced with one or two electrons. When the charge density on the hydrogen‐bond‐accepting carbonyl groups in station 2 is reduced by changing a naphthalimide into a naphthalene diimide radical anion, the shuttling rate changes only slightly. When station 2 is a pyromellitimide radical anion, however, the shuttling rate is significantly reduced. This implies that the shuttling rate is not only determined by the initial unbinding of the ring from the first station, as previously supposed. An alternative reaction mechanism is proposed in which the ring binds to both stations in the transition state.     

Anion-induced shuttling of a naphthalimide triazolium rotaxane

The anion-templated synthesis of a rotaxane structure, incorporating the new naphthalimide triazolium motif, is described and the interlocked host shown to exhibit selective, uni-directional, anion-induced shuttling. Initial pseudorotaxane investigations demonstrate the ability of a naphthalimide triazolium threading component to form interpenetrated assemblies with counter-anion-dependent co-conformations. (1)H NMR studies reveal that the shuttling behaviour of the analogous rotaxane host system is controlled by selective anion binding and by the nature of the solvent conditions. Complete macrocycle translocation only occurs upon the recognition of the smaller halide anions (chloride and bromide). The rotaxane solid-state crystal structure in the presence of chloride is in agreement with the solution-phase co-conformation. The sensitivity of the axle naphthalimide absorbance band to the position of the macrocycle component within the interlocked structure enabled the molecular motion to be observed by UV/Vis spectroscopy, and the chloride-induced shuttling of the rotaxane was reversed upon silver hexafluorophosphate addition.     

A light-driven rotaxane molecular shuttle with dual fluorescence addresses

[reaction: see text] A molecular shuttle containing an alpha-CD macrocycle, an azobenzene unit, and two different fluorescent naphthalimide units was synthesized. The cis-trans photoisomerization of the azobenzene unit resulted in the motion of the CD macrocycle on the track. Because of the easy regulation and full reversibility of the fluorescence change of the two stopper units, the molecular shuttle could be used as a molecular storage medium or switch with all-optical inputs and outputs.     

Adsorption of fumaramide [2]rotaxane and its components on a solid substrate: a coverage-dependent study

The coverage-dependent adsorption on Au(111) of a fumaramide [2]rotaxane and its components, a benzylic amide macrocycle and a fumaramide thread, is studied using high-resolution electron energy loss spectroscopy (HREELS). Up to monolayer coverage, the relative intensity of out-of-plane to in-plane phenyl ring vibrational modes indicates that the macrocycle adopts an orientation with the phenyl rings largely parallel to the surface. The formation of a chemisorption bond is evidenced by the presence of a Au-O stretching vibration. In contrast, the thread shows no evidence of chemisorption or a preferential orientation. The introduction of the thread into the macrocycle partly disrupts the film order so that the resulting chemisorbed rotaxane shows intermediate behavior with a preferential orientation up to 0.5 ML coverage. A decrease in film order and the absence of a preferred molecular orientation is observed for all three molecules at multilayer coverages. The spectral differences are addressed by molecular dynamics simulations in terms of the mobility of the phenyls of the three molecules on Au(111).     

Three state redox-active molecular shuttle that switches in solution and on a surface

Although the desirability of developing synthetic molecular machine systems that can function on surfaces is widely recognized, to date the only well-characterized examples of electrochemically switchable rotaxane-based molecular shuttles which can do so are based on the tetracationic viologen macrocycle pioneered by Stoddart. Here, we report on a [2]rotaxane which features succinamide and naphthalene diimide hydrogen-bonding stations for a benzylic amide macrocycle that can shuttle and switch its net position both in solution and in a monolayer. Three oxidation states of the naphthalene diimide unit can be accessed electrochemically in solution, each one with a different binding affinity for the macrocycle and, hence, corresponding to a different distribution of the rings between the two stations in the molecular shuttle. Cyclic voltammetry experiments show the switching to be both reversible and cyclable and allow quantification of the translational isomer ratios (thermodynamics) and shuttling dynamics (kinetics) for their interconversion in each state. Overall, the binding affinity of the naphthalene diimide station can be changed by 6 orders of magnitude over the three states. Unlike previous electrochemically active amide-based molecular shuttles, the reduction potential of the naphthalene diimide unit is sufficiently positive (-0.68 V) for the process to be compatible with operation in self-assembled monolayers on gold. Incorporating pyridine units into the macrocycle allowed attachment of the shuttles to an acid-terminated self-assembled monolayer of alkane thiols on gold. The molecular shuttle monolayers were characterized by X-ray photoelectron spectroscopy and their electrochemical behavior probed by electrochemical impedance spectroscopy and double-potential step chronoamperometry, which demonstrated that the redox-switched shuttling was maintained in this environment, occurring on the millisecond time scale.     

Altering intercomponent interactions in a photochromic multi-state [2]rotaxane

Rotaxanes have attracted much attention because of their challenging constructions and potential applications. In this paper, a multi-state [2]rotaxane, in which a dithienylethene-functionalized dibenzo-24-crown-8 macrocycle was interlocked onto a thread component bearing a 4-morpholin-naphthalimide fluorescent stopper and two distinct recognition sites, namely, dibenzylammonium and N-methyltriazolium recognition sites, was prepared and studied. By introducing a dithienylethene photochrome into the macrocycle component, multi-mode alteration of the intercomponent interactions, such as energy transfer, electron transfer, and charge transfer interaction between the photochrome and the fluorescent naphthalimide stopper could be altered in this multi-state rotaxane system in response to the combination of chemical and photochemical stimuli.     

Optically probing molecular shuttling motion of [2]rotaxane by a conformation-adaptive fluorophore

A bistable [2]rotaxane with a conformation-adaptive macrocycle bearing a 9,14-diphenyl-9,14-dihydrodibenzo[a,c]phenazine (DPAC) unit was synthesized, which could be utilized to optical probe the molecular shuttling motion of the functionalized rotaxane system. The UV–vis, ¹H NMR and PL spectroscopic data clearly demonstrated that the DPAC ring was interlocked onto the thread and the fluorescence intensity of the DPAC unit in the macrocycle was effectively regulated by the location change of the macrocycle along the thread under acid/base stimulation, which was attributed to the modulation of the intramolecular photo-induced electron transfer between the DPAC unit and the methyltriazole (MTA) unit. This bistable rotaxane system containing a conformation-adaptive fluorophore unit in the macrocycle moiety opens an alternative way to design functional bistable mechanically interlocked molecules.     

Anion‐Induced Shuttling of a Naphthalimide Triazolium Rotaxane

The anion‐templated synthesis of a rotaxane structure, incorporating the new naphthalimide triazolium motif, is described and the interlocked host shown to exhibit selective, uni‐directional, anion‐induced shuttling. Initial pseudorotaxane investigations demonstrate the ability of a naphthalimide triazolium threading component to form interpenetrated assemblies with counter‐anion‐dependent co‐conformations. ¹H NMR studies reveal that the shuttling behaviour of the analogous rotaxane host system is controlled by selective anion binding and by the nature of the solvent conditions. Complete macrocycle translocation only occurs upon the recognition of the smaller halide anions (chloride and bromide). The rotaxane solid‐state crystal structure in the presence of chloride is in agreement with the solution‐phase co‐conformation. The sensitivity of the axle naphthalimide absorbance band to the position of the macrocycle component within the interlocked structure enabled the molecular motion to be observed by UV/Vis spectroscopy, and the chloride‐induced shuttling of the rotaxane was reversed upon silver hexafluorophosphate addition.     

Synthesis of triazolium-based mono- and tris-branched [1]rotaxanes using a molecular transporter of dibenzo-24-crown-8

We report a diverted route to [1]rotaxane and tris-branched [1]rotaxane that are devoid of any efficient template and which could not be obtained by classical straightforward strategies. The described chemical route relies on the utilization of a “macrocycle transporter”, which is able first to bind a macrocycle, second to link temporarily a triazolium-containing molecular axle, and third to deliver the macrocycle around the new docked axle through molecular machinery in a [1]rotaxane structure. The extended encircled thread is eventually cleaved by an amine or a triamine to afford the triazolium-containing [1]rotaxanes, releasing at the same time, the macrocycle transporter as a recyclable species.     

Phosphorus-based functional groups as hydrogen bonding templates for rotaxane formation

We report on the use of the hydrogen bond acceptor properties of some phosphorus-containing functional groups for the assembly of a series of [2]rotaxanes. Phosphinamides, and the homologous thio- and selenophosphinamides, act as hydrogen bond acceptors that, in conjunction with an appropriately positioned amide group on the thread, direct the assembly of amide-based macrocycles around the axle to form rotaxanes in up to 60% yields. Employing solely phosphorus-based functional groups as the hydrogen bond accepting groups on the thread, a bis(phosphinamide) template and a phosphine oxide-phosphinamide template afforded the corresponding rotaxanes in 18 and 15% yields, respectively. X-ray crystallography of the rotaxanes shows the presence of up to four intercomponent hydrogen bonds between the amide groups of the macrocycle and various hydrogen bond accepting groups on the thread, including rare examples of amide-to-phosphinamide, -thiophosphinamide, and -selenophosphinamide groups. With a phosphine oxide-phosphinamide thread, the solid-state structure of the rotaxane is remarkable, featuring no direct intercomponent hydrogen bonds but rather a hydrogen bond network involving water molecules that bridge the H-bonding groups of the macrocycle and thread through bifurcated hydrogen bonds. The incorporation of phosphorus-based functional groups into rotaxanes may prove useful for the development of molecular shuttles in which the macrocycle can be used to hinder or expose binding ligating sites for metal-based catalysts.     

Fluorescent Alteration on a Bistable Molecular Shuttle

Solvent driven molecular shuttles containing a pyrene‐connected macrocycle and an intramolecular charge‐transfer (ICT) chromophore stopper are constructed. In one of the molecular shuttles, a long C‐10 chain is introduced in the thread to separate the peptide station and the ICT stopper. The macrocycle stays in the peptide station in apolar solvents and moves to the C10‐chain station in highly polar solvents. This moving process alters the electronic interaction between the pyrene unit in the macrocycle and the ICT stopper, which induces the change of the pyrene fluorescence emission. The molecular shuttle exhibits stronger emission when the macrocycle is adjacent to the ICT stopper.     

Bimodal dynamics of mechanically constrained hydrogen bonds revealed by vibrational photon echoes

We have investigated the dynamics of the hydrogen bonds that connect the components of a [2]rotaxane in solution. In this rotaxane, the amide groups in the benzylic-amide macrocycle and the succinamide thread are connected by four equivalent N-H???O=C hydrogen bonds. The fluctuations of these hydrogen bonds are mirrored by the frequency fluctuations of the NH-stretch modes, which are probed by means of three-pulse photon-echo peak shift spectroscopy. The hydrogen-bond fluctuations occur on three different time scales, with time constants of 0.1, 0.6, and ≥200 ps. Comparing these three time scales to the ones found in liquid formamide, which contains the same hydrogen-bonded amide motif but without mechanical constraints, we find that the faster two components, which are associated with small-amplitude fluctuations in the strength of the N-H???O=C hydrogen bonds, are very similar in the liquid and the rotaxane. However, the third component, which is associated with the breaking and subsequent reformation of hydrogen bonds, is found to be much slower in the rotaxane than in the liquid. It can be concluded that the mechanical bonding in a rotaxane does not influence the amplitude and time scale of the small-amplitude fluctuations of the hydrogen bonds, but strongly slows down the complete dissociation of these hydrogen bonds. This is probably because in a rotaxane breaking of the macrocycle-axle contacts is severely hindered by the mechanical constraints. The hydrogen-bond dynamics in rotaxane-based molecular machines can therefore be regarded as liquidlike on a time scale 1 ps and less, but structurally frozen on longer (up to at least 200 ps) time scales.     

A [3]rotaxane with three stable states that responds to multiple-inputs and displays dual fluorescence addresses

A [3]rotaxane molecular shuttle containing two alpha-cyclodextrin (alpha-CD) macrocycles, an azobenzene unit, a stilbene unit, and two different fluorescent naphthalimide units has been investigated. The azobenzene unit and the stilbene unit can be E/Z-photoisomerized separately by light excited at different wavelengths. Irradiation at 380 nm resulted in the photoisomerization of the azobenzene unit, leading to the formation of one stable state of the [3]rotaxane (Z1-NNAS-2CD); irradiation at 313 nm resulted in the photoisomerization of the stilbene unit, leading to the formation of another stable state of the [3]rotaxane (Z2-NNAS-2CD). The reversible conversion of the Z1 and Z2 isomers back to the E isomer by irradiation at 450 nm and 280 nm, respectively, is accompanied by recovery of the absorption and fluorescence spectra of the [3]rotaxane. The E isomer and the two Z isomers have been characterized by 1H NMR spectroscopy and by two-dimensional NMR spectroscopy. The light stimuli can induce shuttling motions of the two alpha-CD macrocycles on the molecular thread; concomitantly, the absorption and fluorescence spectra of the [3]rotaxane change in a regular way. When the alpha-CD macrocycle stays close to the fluorescent moiety, the fluorescence of the moiety become stronger due to the rigidity of the alpha-CD ring. As the photoisomerization processes are fully reversible, the photo-induced shuttling motions of the alpha-CD rings can be repeated, accompanied by dual reversible fluorescence signal outputs. The potential application of such light-induced mechanical motions at the molecular level could provide some insight into the workings of a molecular machine with entirely optical signals, and could provide a cheap, convenient interface for communication between micro- and macroworlds.     

Squaraine-derived rotaxanes: sterically protected fluorescent near-IR dyes

A squaraine dye with bulky end groups is employed as the thread component in two Leigh-type amide rotaxanes. The rotaxanes are synthesized in a simple two-step process. X-ray crystal structures of the rotaxanes show that the pyridyl-containing macrocycle is more rigid and wraps more tightly around the cyclobutene core of the squaraine thread compared to the isophthalamide-containing macrocycle. The rotaxanes exhibit photophysical properties that are similar to the precursor squaraine. The encapsulating macrocycle greatly increases the chemical stability of the squaraine thread and inhibits aggregation-induced broadening of its absorption spectrum. It should be possible to prepare squaraine-derived rotaxanes with improved properties for a wide range of photophysical, photochemical, and biomedical applications.     

Chiroptical switching in a bistable molecular shuttle

Although various methods for switching the positions of macrocycles in bistable rotaxane-based molecular shuttles have been developed, exploiting such movements to trigger property changes has thus far received little attention. Here we describe one of the first examples of a property change achieved through a controlled large-amplitude translational motion in a rotaxane; a novel type of chiroptical switch is described, in which light-induced translation of the macrocycle along the thread of a [2]rotaxane produces a strong induced circular dichroism (ICD) response only when the macrocycle is hydrogen-bonded to a chiral peptide station.     

Experimental and theoretical study of the adsorption of fumaramide [2]rotaxane on Au(111) and Ag(111) surfaces

Thin films of fumaramide [2]rotaxane, a mechanically interlocked molecule composed of a macrocycle and a thread in a "bead and thread" configuration, were prepared by vapor deposition on both Ag(111) and Au(111) substrates. X-ray photoelectron spectroscopy (XPS) and high-resolution electron-energy-loss spectroscopy were used to characterize monolayer and bulklike multilayer films. XPS determination of the relative amounts of carbon, nitrogen, and oxygen indicates that the molecule adsorbs intact. On both metal surfaces, molecules in the first adsorbed layer show an additional component in the C 1s XPS line attributed to chemisorption via amide groups. Molecular-dynamics simulation indicates that the molecule orients two of its eight phenyl rings, one from the macrocycle and one from the thread, in a parallel bonding geometry with respect to the metal surfaces, leaving three amide groups very close to the substrate. In the case of fumaramide [2]rotaxane adsorption on Au(111), the presence of certain out-of-plane phenyl ring and Au-O vibrational modes points to such bonding and a preferential molecular orientation. The theoretical and experimental results imply that the three-dimensional intermolecular configuration permits chemisorption at low coverage to be driven by interactions between the three amide functions of fumaramide [2]rotaxane and the Ag(111) or Au(111) surface.     

Dynamic Control of Chiral Space Through Local Symmetry Breaking in a Rotaxane Organocatalyst

We report on a switchable rotaxane molecular shuttle that features a pseudo‐meso 2,5‐disubstituted pyrrolidine catalytic unit on the axle whose local symmetry is broken according to the position of a threaded benzylic amide macrocycle. The macrocycle can be selectively switched (with light in one direction; with catalytic acid in the other) with high fidelity between binding sites located to either side of the pyrrolidine unit. The position of the macrocycle dictates the facial bias of the rotaxane‐catalyzed conjugate addition of aldehydes to vinyl sulfones. The pseudo‐meso non‐interlocked thread does not afford significant selectivity as a catalyst (2–14 % ee), whereas the rotaxane affords selectivities of up to 40 % ee with switching of the position of the macrocycle changing the handedness of the product formed (up to 60 % Δee).     

Squaraine-derived rotaxanes: highly stable, fluorescent near-IR dyes

Squaraines are fluorescent, near-IR dyes with promising photophysical properties for biomedical applications. A limitation with these dyes is their inherent reactivity with nucleophiles, which leads to loss of the chromophore. Another drawback is their tendency to form nonfluorescent aggregates in water. Both problems can be greatly attenuated by encapsulating the dye inside an amide-containing macrocycle. In other words, the squaraine becomes the thread component in a Leigh-type rotaxane, a permanently interlocked molecule. Two new rotaxanes are described: an analogue with four tri(ethyleneoxy) chains on the squaraine to enhance water solubility, and a rotaxane that has an encapsulating macrocycle with transposed carbonyl groups. An X-ray crystal structure of the latter rotaxane shows that the macrocycle provides only partial protection of the electrophilic cyclobutene core of the squaraine thread. The stabilities of each compound in various solvents, including serum, were compared with a commercially available cyanine dye. The squaraine rotaxane architecture is remarkably resistant to chemical and photochemical degradation, and likely to be very useful as a versatile fluorescent scaffold for constructing various types of highly stable, near-IR imaging probes.