How ion properties determine the stability of a lipase enzyme in ionic liquids: a molecular dynamics study

The influence of eight different ionic liquid (IL) solvents on the stability of the lipase Candida antarctica lipase B (CAL-B) is investigated with molecular dynamics (MD) simulations. Considered ILs contain cations that are based either on imidazolium or guanidinium as well as nitrate, tetrafluoroborate or hexafluorophosphate anions. Partial unfolding of CAL-B is observed during high-temperature MD simulations and related changes of CAL-B regarding its radius of gyration, surface area, secondary structure, amount of solvent close to the backbone and interaction strength with the ILs are evaluated. CAL-B stability is influenced primarily by anions in the order NO(3)(-)? BF(4)(-) < PF(6)(-) of increasing stability, which agrees with experiments. Cations influence protein stability less than anions but still substantially. Long decyl side chains, polar methoxy groups and guanidinium-based cations destabilize CAL-B more than short methyl groups, other non-polar groups and imidazolium-based cations, respectively. Two distinct causes for CAL-B destabilization are identified: a destabilization of the protein surface is facilitated mostly by strong Coulomb interactions of CAL-B with anions that exhibit a localized charge and strong polarization as well as with polar cation groups. Surface instability is characterized by an unraveling of α-helices and an increase of surface area, radius of gyration and protein-IL total interaction strength of CAL-B, all of which describe a destabilization of the folded protein state. On the other hand, a destabilization of the protein core is facilitated when direct core-IL interactions are feasible. This is the case when long alkyl chains are involved or when particularly hydrophobic ILs induce major conformational changes that enable ILs direct access to the protein core. This core instability is characterized by a disintegration of β-sheets, diffusion of ions into CAL-B and increasing protein-IL van der Waals interactions. This process describes a stabilization of the unfolded protein state. Both of these processes reduce the folding free energy and thus destabilize CAL-B. The results of this work clarify the impact of ions on CAL-B stabilization. An extrapolation of the observed trends enables proposing novel ILs in which protein stability could be enhanced further.     

Solvation of uranium hexachloro complexes in room-temperature ionic liquids. A molecular dynamics investigation in two liquids

We report a molecular dynamics study of the solvation of UCl(6)(-), UCl(6)(2-), and UCl(6)(3-) complexes in the [BMI][Tf(2)N] and [MeBu(3)N][Tf(2)N] ionic liquid cations based on the same anion (bis(trifluoromethylsulfonyl)imide (Tf(2)N-)) and the butyl-3-methyl-imidazolium+ (BMI+) or methyl-tri-n-butyl-ammonium (MeBu(3)N+) cation, respectively. The comparison of two electrostatic models of the complexes (ionic model with -1 charged halides versus quantum mechanically derived charges) yields similar solvation features of a given solute. In the two liquids, the first solvation shell of the complexes is positively charged and evolves from purely cationic in the case of UCl(6)(3-) to a mixture of cations and anions in the case of UCl(6)(-). UCl(6)(3-) is exclusively "coordinated" to BMI+ or MeBu(3)N+ solvent cations that mainly interact via their CH aromatic protons or their N-Me group, respectively. Around the less charged UCl(6)(-) complex, the cations interact via the less polar moieties (butyl chains of BMI+ or MeBu(3)N+) and the anions display nonspecific interactions. In no case does the uranium atom further coordinate solvent ions. According to an energy components analysis, UCl(6)(3-) interacts more attractively with the [BMI][Tf(2)N] liquid than with [MeBu(3)N][Tf(2)N], while UCl(6)(-) does not show any preference, suggesting a significant solvation effect of the redox properties of uranium, also supported by free energy perturbation simulations. The effect of ionic liquid (IL) humidity is investigated by simulating the three complexes in 1:8 water/IL mixtures. In contrast to the case of "naked" ions (e.g., lanthanide(3+), UO2(2+), alkali, or halides), water has little influence on the solvation of the UCl(6)(n-) complexes in the two simulated ILs, as indicated by structural and energy analysis. This is in full agreement with the experimental observations (Nikitenko, S. I.; et al. Inorg. Chem. 2005, 44, 9497).     

Hydrogen bonding mediated ion pairs of some aprotic ionic liquids and their structural transition in aqueous solution

Ion pair speciation of ionic liquids(ILs) has an important effect on the physical and chemical properties of ILs and recognition of the structure of ion pairs in solution is essential. It has been reported that ion pairs of some ILs can be formed by hydrogen bonding interactions between cations and anions of them. Considering the fact that far-IR(FIR) spectroscopy is a powerful tool in indicating the intermolecular and intramolecular hydrogen bonding, in this work, this spectroscopic technique has been combined with molecular dynamic(MD) simulation and nuclear magnetic resonance hydrogen spectroscopy(~1H NMR) to investigate ion pairs of aprotic ILs [Bmim][NO_3], [BuPy][NO_3], [Pyr_(14)][NO_3], [PP_(14)][NO_3] and [Bu-choline][NO_3] in aqueous IL mixtures. The FIR spectra have been assigned with the aid of density functional theory(DFT) calculations, and the results are used to understand the effect of cationic nature on the structure of ion pairs. It is found that contact ion pairs formed in the neat aprotic ILs by hydrogen bonding interactions between cation and anion, were still maintained in aqueous solutions up to high water mole fraction(say 0.80 for [BuPy][NO3]). When water content was increased to a critical mole fraction of water(say 0.83 for [BuPy][NO3]), the contact ion pairs could be transformed into solvent-separated ion pairs due to the formation of the hydrogen bonding between ions and water. With the further dilution of the aqueous ILs solution, the solvent-separated ion pairs was finally turned into free cations and free anions(fully hydrated cations or anions). The concentrations of the ILs at which the contact ion pairs were transformed into solvent-separated ion pairs and solvent-separated ion pairs were transformed into free ions(fully hydrated ion) were dependent on the cationic structures. These information provides direct spectral evidence for ion pair structures of the aprotic ILs in aqueous solution. MD simulation and ~1H NMR results support the conclusion drawn from FIR spectra investigations.     

Evaluating the solvation properties of functionalized ionic liquids with varied cation/anion composition using the solvation parameter model

Ionic liquids (ILs) are promising gas chromatography (GC) stationary phases due to their high thermal stability, negligible vapor pressure, and ability to solvate a broad range of analytes. The tunability of ILs allows for structure modification in pursuit of enhanced separation selectivity and control of analyte elution order. In this study, the solvation parameter model is used to characterize the solvation interactions of fifteen ILs containing various cationic functional groups (i.e., dimethylamino, hydroxyl, and ether) and cation types paired with various counter anions, namely, tris(pentafluoroethyl)trifluorophosphate (FAP(-)), bis[(trifluoromethyl)sulfonyl]imide (NTf(2)(-)), thiocyanate (SCN(-)), tricyanomethide (C(CN)(3)(-)), tetracyanoborate (B(CN)(4)(-)), and bis[oxalate(2-)]borate (BOB(-)). The presence of functional groups affected the hydrogen bond basicity, hydrogen bond acidity, as well as dispersion interactions of the resulting ILs, while the change of cation type yielded modest influence on the dipolarity. The switch of counter anions in unfunctionalized ILs produced compounds with higher dipolarity and hydrogen bond basicity. The dipolarity and hydrogen bond basicity of ILs possessing cyano-containing anions appeared to be inversely proportional to the cyano content of the anion. The modification of IL structure resulted in a significant effect on the retention behavior as well as separation selectivity for many solutes, including reversed elution orders of some analytes. This study provides one of the most comprehensive examinations up-to-date on the relation between IL structure and the resulting solvation characteristics and gives tremendous insight into choosing suitable ILs as GC stationary phases for solute specific separations.     

Electronic structure calculations and physicochemical experiments quantify the competitive liquid ion association and probe stabilisation effects for nitrobenzospiropyran in phosphonium-based ionic liquids

Liquid ion association in ionic liquids (ILs) has been examined using a comprehensive series of electronic structure calculations that measure the relative extents of ion association and probe stabilisation for the photochromic dye nitrobenzospiropyran (BSP) in a range of ILs featuring both long-tailed phosphonium cations and short-tailed imidazolium cations, paired with both chloride and NTf(2) anions. New physicochemical experiments measured the photochromic properties of BSP in the phosphonium-based room temperature ILs. Taken together, the computed complexation energies and measured spectroscopic properties support recent Walden plots of unusual conductivity-viscosity behaviour obtained for the same ILs and reveal some new features in the atom-scale structure and energetics of local, ion-ion and ion-molecule interactions. Calculations show inter-ion interactions strengthened by between 0.4 and 0.7 eV as stronger constituent ions are used, which contributes to the longer range rigidity of the Cl-based IL structure as reflected in the doubled |zwitterion → closed| probe relaxation time measured for Cl(-)vs. NTf(2)(-) in phosphonium-based ILs. Calculations further reveal a similar, approximately 0.6-0.7 eV maximum "residual" IL headgroup-mediated probe stabilisation potentially available for the anion-probe-cation complexes via the stabilising interaction that remains following the "quenching" interaction between the IL anion and cation. This potential stabilisation, however, is offset by both longer-range charge networks, beyond the scope of the current purely quantum mechanical simulations, and also energetic penalties for disruption of the highly-interdigitated alkyl tail networks in the phosphonium-based ILs which may be estimated from known diffusion data. Overall the electronic calculations of local, individual ion-ion and ion-molecule interactions serve to clarify some of the measured physicochemical properties and provide new data for the development of classical force field-based approaches to measure also the longer range effects that, together with the electronic effects, provide the condensed phase IL structure and properties. More generally, the combined simulation and experimental results serve as a further example of how both the polar hydrophilic headgroup and non-polar hydrophobic tail of the constituent ions serve as distinct targets for IL rational design.     

Properties of Apolar Solutes in Alkyl Imidazolium‐Based Ionic Liquids: The Importance of Local Interactions

The solvation and the dynamic properties of apolar model solutes in alkyl imidazolium‐based ionic liquids (IL) are studied by using all‐atom molecular dynamics simulations. In regards to specific IL effects, we focused on the often used 1‐ethyl‐3‐methyl imidazolium cation in combination with the anions tetrafluoroborate, acetate, and bis(trifluoromethanesulfonyl)imide. Our findings reveal that the size of the anion crucially influences the accumulation behavior of the cations, which results in modified IL solvation properties. Deviations between the different alkyl imidazolium‐based IL combinations can be also observed with regard to the results for the radial distribution functions, the number of surrounding molecules, and the molecular orientation. The analysis of the van Hove function further shows pronounced differences in the dynamic behavior of the solutes. The simulations verify that the solute mobilities are mainly influenced by the composition of the local solvent shell and the properties of the underlying Lennard–Jones interactions. Additional simulations with regard to modified short‐range dispersion energies for alkyl imidazolium‐based ILs validate our conclusions.     

Examination of Selectivities of Thermally Stable Geminal Dicationic Ionic Liquids by Structural Modification

Dicationic ionic liquids (ILs) are widely used as gas chromatography (GC) stationary phases as they show higher thermal stabilities, variety of polarities, and unique selectivities towards certain compounds. An important aspect contributing to them is that they show multiple solvation interactions compared to the traditional GC stationary phases. Dicationic ILs are considered as combination of three structural moieties: (1) cationic head groups; (2) a linkage chain; and (3) the counter anions. Modifications in these structural moieties can alter the chromatographic properties of IL stationary phases. In this study, a series of nine thermally stable IL stationary phases were synthesized by the combination of five different cations, two different linkage chains, and two different anions. Different test mixtures composed of a variety of compounds having different functional groups and polarities were analyzed on these columns. A comparison of the separation patterns of these different compounds on nine different IL columns provided some insights about the effects of structural modifications on the selectivities and polarities of dicationic ILs.     

Stability of ion triplets in ionic liquid/lithium salt solutions: Insights from implicit and explicit solvent models and molecular dynamics simulations

Binding energies of ion triplets formed in ionic liquids by Li⁺ with two anions have been studied using quantum‐chemical calculations with implicit and explicit solvent supplemented by molecular dynamics (MD) simulations. Explicit solvent approach confirms variation of solute‐ionic liquid interactions at distances up to 2 nm, resulting from structure of solvation shells induced by electric field of the solute. Binding energies computed in explicit solvent and from the polarizable continuum model approach differ largely, even in sign, but relative values generally agree between these two models. Stabilities of ion triplets obtained in quantum‐chemical calculations for some systems disagree with MD results; the discrepancy is attributed to the difference between static optimized geometries used in quantum chemical modeling and dynamic structures of triplets in MD simulations. © 2015 Wiley Periodicals, Inc.     

Understanding cellulose dissolution: effect of the cation and anion structure of ionic liquids on the solubility of cellulose

The effect of ionic liquids (ILs) on the solubility of cellulose was investigated by changing their anions and cations. The structural variation included 11 kinds of cations in combination with 4 kinds of anions. The interaction between the IL and cellobiose, the repeating unit of cellulose, was clarified through nuclear magnetic resonance (NMR) spectroscopy. The reason for different dissolving capabilities of various ILs was revealed. The hydrogen bonding interaction between the IL and hydroxyl was the major force for cellulose dissolution. Both the anion and cation in the IL formed hydrogen bonds with cellulose. Anions associated with hydrogen atoms of hydroxyls, and cations favored the formation of hydrogen bonds with oxygen atoms of hydroxyls by utilizing activated protons in imidazolium ring. Weakening of either the hydrogen bonding interaction between the anion and cellulose, or that between the cation and cellulose, or both, decreases the capability of ILs to dissolve cellulose.     

Interactions between hydrophobic and ionic solutes in aqueous guanidinium chloride and urea solutions: lessons for protein denaturation mechanism

In order to clarify the mechanism of denaturant-induced unfolding of proteins we have calculated the interactions between hydrophobic and ionic species in aqueous guanidinium chloride and urea solutions using molecular dynamics simulations. Hydrophobic association is not significantly changed in urea or guanidinium chloride solutions. The strength of interaction between ion pairs is greatly diminished by the guanidinium ion. Although the changes in electrostatic interactions in urea are small, examination of structures, using appropriate pair functions, of urea and water around the solutes show strong hydrogen bonding between urea's carbonyl oxygen and the positively charged solute. Our results strongly suggest protein denaturation occurs by the direct interaction model according to which the most commonly used denaturants unfold proteins by altering electrostatic interactions either by solvating the charged residues or by engaging in hydrogen bonds with the protein backbone. To further validate the direct interaction model we show that, in urea and guanidinium chloride solutions, unfolding of an unusually stable helix (H1) from mouse PrPC (residues 144-153) occurs by hydrogen bonding of denaturants to charged side chains and backbone carbonyl groups.     

Ultrafast solvation dynamics in room temperature ionic liquids observed by three-pulse photon echo peak shift measurements

Three-pulse photon echo peak shift (3PEPS) measurement was applied to the investigation of the primary part (<100 ps) of the solvation dynamics in a series of imidazolium ionic liquids (IL) with an organic dye, oxazine 4 (Ox4), utilized as a probe. The ultrafast solvent response in the range of ≤300 fs exhibited dependence on the square root of the anion mass, indicating its relation with the inertial motion of anion. The inertial response of ILs with chloride anion was the fastest among other ILs with heavier and larger anions. Because Ox4 is a cationic dye, it holds a stronger interaction with the anion of IL, thus the ultrafast part of the solvation is strongly affected by the inertial motion of anions. The second solvation component in the range of ≤3.5 ps had better correlation with the reduced mass and the size of both ions included, indicating the beginning of a more global solvation process.     

Why are ionic liquids liquid? A simple explanation based on lattice and solvation energies

We have developed a simple and quantitative explanation for the relatively low melting temperatures of ionic liquids (ILs). The basic concept was to assess the Gibbs free energy of fusion (Delta(fus)G) for the process IL(s) --> IL(l), which relates to the melting point of the IL. This was done using a suitable Born-Fajans-Haber cycle that was closed by the lattice (i.e., IL(s) --> IL(g)) Gibbs energy and the solvation (i.e., IL(g) --> IL(l)) Gibbs energies of the constituent ions in the molten salt. As part of this project we synthesized and determined accurate melting points (by DSC) and dielectric constants (by dielectric spectroscopy) for 14 ionic liquids based on four common anions and nine common cations. Lattice free energies (Delta(latt)G) were estimated using a combination of Volume Based Thermodynamics (VBT) and quantum chemical calculations. Free energies of solvation (Delta(solv)G) of each ion in the bulk molten salt were calculated using the COSMO solvation model and the experimental dielectric constants. Under standard ambient conditions (298.15 K and 10(5) Pa) Delta(fus)G degrees was found to be negative for all the ILs studied, as expected for liquid samples. Thus, these ILs are liquid under standard ambient conditions because the liquid state is thermodynamically favorable, due to the large size and conformational flexibility of the ions involved, which leads to small lattice enthalpies and large entropy changes that favor melting. This model can be used to predict the melting temperatures and dielectric constants of ILs with good accuracy. A comparison of the predicted vs experimental melting points for nine of the ILs (excluding those where no melting transition was observed and two outliers that were not well described by the model) gave a standard error of the estimate (s(est)) of 8 degrees C. A similar comparison for dielectric constant predictions gave s(est) as 2.5 units. Thus, from very little experimental and computational data it is possible to predict fundamental properties such as melting points and dielectric constants of ionic liquids.     

Dependence of ion hydration on the sign of the ion's charge

The solvation of simple ions in water is studied using molecular dynamics simulations with a polarizable force field. Previous simulations using this potential demonstrated that anions are more favorably solvated in water than cations. The present work is an attempt to explain this result by examining the effects of ions on the surrounding water structure, with particular focus on the first solvation shell and its interactions with the surrounding water. We conclude that while the first solvation shell surrounding cations is frustrated by competition between ion-water and water-water interactions, solvation of anions is compatible with good water-water interactions.     

Understanding the mechanism of cellulose dissolution in 1-butyl-3-methylimidazolium chloride ionic liquid via quantum chemistry calculations and molecular dynamics simulations

While N,N′-dialkylimidazolium ionic liquids (ILs) have been well-established as effective solvents for dissolution and processing of cellulose, the detailed mechanism at the molecular level still remains unclear. In this work, we present a combined quantum chemistry and molecular dynamics simulation study on how the ILs dissolve cellulose. On the basis of calculations on 1-butyl-3-methylimidazolium chloride, one of the most effective ILs dissolving cellulose, we further studied the molecular behavior of cellulose models (i.e. cellulose oligomers with degrees of polymerization n = 2, 4, and 6) in the IL, including the structural features and hydrogen bonding patterns. The collected data indicate that both chloride anions and imidazolium cations of the IL interact with the oligomer via hydrogen bonds. However, the anions occupy the first coordination shell of the oligomer, and the strength and number of hydrogen bonds and the interaction energy between anions and the oligomer are much larger than those between cations and the oligomer. It is observed that the intramolecular hydrogen bond in the oligomer is broken under the combined effect of anions and cations. The present results emphasize that the chloride anions play a critically important role and the imidazolium cations also present a remarkable contribution in the cellulose dissolution. This point of view is different from previous one that only underlines the importance of the chloride anions in the cellulose dissolution. The present results improve our understanding for the cellulose dissolution in imidazolium chloride ILs.     

咪唑类离子液体与酪氨酸相互作用及机理的密度泛函理论研究

Ionic liquids (ILs) are thermally and chemically stable and have adjustable structures, which gives them the potential to be used as green, efficient biomolecular solvents. Given the critical role of ILs in dissolving biomolecules, the mechanism of interaction between them deserves further study. Herein, density functional theory (DFT) calculations, using the SMD implicit water solvent model, were employed to study the interaction and mechanism between a hydrophobic zwitterionic amino acid (Tyr) and a series of imidazolium ILs with different alkyl chain lengths and methylation sites. The contributions of hydrogen bonding (H-bonding), electrostatic effects, induction, and dispersion to the intermolecular interactions were determined by combining the symmetry-adapted perturbation theory (SAPT), the atoms in molecules (AIM) theory, and reduced density gradient (RDG) analysis. The results indicate that the H-bonding between the IL cation and Tyr is stronger than that between the IL anion and Tyr; however, the binding between either ion and Tyr is dominated by electrostatic effects. By contrast, the difference between the induction and dispersion forces is small when methylation occurs on the C2 site of the imidazolium cation; whereas, it is significantly large when methylation takes place on the N3 site. This is rationalized by the interaction patterns that vary based on the methylation site. H-bonding and π⁺-π stacking interactions between the imidazole and benzene rings are dominant during C2-methylation, while H-bonding and C_Alkyl-H…π interactions between the alkyl chain and benzene ring are dominant during N3-methylation. Increasing the side alkyl chain length has different effects on the interaction energy to cations with different methylation sites. During N3-methylation, when the side alkyl chain length increases from 4 to 12, there are significant van der Waals interactions between the Tyr benzene and the side alkyl chain. However, these van der Waals interactions are inapparent when methylation takes place on the C2 site. Finally, the synergetic effect of the H-bonding and the interaction between the benzene and the side alkyl chain for C2-methylation is greater than the H-bonding and the interaction between the imidazole and benzene rings for N3-methylation, when the side alkyl chain length n > 9. Therefore, the interaction strength and mechanism in these imidazolium-Tyr complexes can be regulated by changing the methylation site and the side alkyl chain length of the cation. Further study of ion-pair and Tyr reveals that the change tendency of the interaction energy of IL-Tyr systems is consistent with that of cation-Tyr cases, and the ion pair further stabilizes the binding with Tyr. These results illustrate the interaction mechanism of IL-Tyr systems and provide a novel strategy for the design and screening of functional ILs for amino acid extraction and separation in the future.     

Uranyl coordination in ionic liquids: the competition between ionic liquid anions, uranyl counterions, and Cl- anions investigated by extended X-ray absorption fine structure and UV-visible spectroscopies and molecular dynamics simulations

The first coordination sphere of the uranyl cation in room-temperature ionic liquids (ILs) results from the competition between its initially bound counterions, the IL anions, and other anions (e.g., present as impurities or added to the solution). We present a joined spectroscopic (UV-visible and extended X-ray absorption fine structure)-simulation study of the coordination of uranyl initially introduced either as UO2X2 salts (X-=nitrate NO3-, triflate TfO-, perchlorate ClO4-) or as UO2(SO4) in a series of imidazolium-based ILs (C4mimA, A-=PF6-, Tf2N-, BF4- and C4mim=1-methyl-3-butyl-imidazolium) as well as in the Me3NBuTf2N IL. The solubility and dissociation of the uranyl salts are found to depend on the nature of X- and A-. The addition of Cl- anions promotes the solubilization of the nitrate and triflate salts in the C4mimPF6 and the C4mimBF4 ILs via the formation of chloro complexes, also formed with other salts. The first coordination sphere of uranyl is further investigated by molecular dynamics (MD) simulations on associated versus dissociated forms of UO2X2 salts in C4mimA ILs as a function of A- and X- anions. Furthermore, the comparison of UO2Cl(4)2-, 2 X- complexes with dissociated X- anions, to the UO2X2, 4 Cl- complexes with dissociated chlorides, shows that the former is more stable. The case of fluoro complexes is also considered, as a possible result of fluorinated IL anion's degradation, showing that UO2F42- should be most stable in solution. In all cases, uranyl is found to be solvated as formally anionic UO2XnAmClp2-n-m-p complexes, embedded in a cage of stabilizing IL imidazolium or ammonium cations.     

Solvation of sodium chloride in the 1-butyl-3-methyl-imidazolium bis(trifluoromethylsulfonyl)imide ionic liquid: a molecular dynamics study

We report molecular dynamics studies on the solvation of sodium chloride in the 1-butyl-3-methyl-imidazolium bis(trifluoromethylsulfonyl)imide ionic liquid ([BMI][Tf2N] IL). We first consider the potential of mean force for dissociating a single Na+Cl- ion pair, showing that the latter prefers to be undissociated rather than dissociated (by ca. 9 kcal/mol), with a free energy barrier of ca. 5 kcal/mol (at d approximately 5.2 A) for the association process. The preference for Na+Cl- association is also observed from a 100 ns molecular dynamics simulation of a concentrated solution, where the Na+Cl- ions tend to form oligomers and microcrystals in the IL. Conversely, the simulation of Na13Cl14- and Na14Cl13+ cubic microcrystals (with, respectively, Cl- and Na+ at the vertices) does not lead to dissolution in the IL. Among these, Na14Cl13+ is found to be better solvated than Na13Cl14-, mainly due to the stronger Na+...Tf2N- interactions as compared to the Cl-...BMI+ interactions at the vertices of the cube. We finally consider the solid/liquid interface between the 100 face of NaCl and the IL, revealing that, in spite of its polar nature, the crystal surface is solvated by the less polar IL components (CF3(Tf2N) and butyl(BMI) groups) rather than by the polar ones (O(Tf2N) and imidazolium(BMI) ring). Specific ordering at the interface is described for both Tf2N- anions and BMI+ cations. In the first IL layer, the ions are rather parallel to the surface, whereas in the second "layer" they are more perpendicular. A similar IL structure is found at the surface of the all-neutral Na0Cl0 solid analogue, confirming that the solvation of the crystal is rather "apolar", due to the mismatch between the IL and the crystal ions. Several comparisons with water, methanol, or different BMI+-based ILs as solvents are presented, allowing us to better understand the specificity of the ionic liquid-NaCl interactions.     

Effect of electrolytes on the retention behavior of some benzenesulfonates in electrochemically modulated liquid chromatography

The effects of electrolytes on the retention behavior of some benzenesulfonates in electrochemically modulated liquid chromatography were studied. Both cations and anions were found to have considerable effects on retention. As cation size increases, retention decreases, while anions show more complicated effects were anionic size and charge distribution contribute to the overall behavior of anions. Large anions with a delocalized negative charge on the whole species result in lower retention times, and vice versa. Also, electrolyte concentration plays an important role in the retention behavior observed. Initially, as electrolyte concentration was increased retention increased due to electrostatic interactions of cations with the negatively charged stationary phase. However, retention starts to slightly decrease or increase after some specific electrolyte concentration depending on the nature of the electrolytic species. Finally, an interesting behavior of double peak appearance of a single solute was observed at low electrolyte concentrations and was attributed to the presence of other active sites on the carbon stationary phase.     

Coexistence of Tellurium Cations and Anions in Phosphonium-Based Ionic Liquids

Elemental tellurium readily dissolves in ionic liquids (ILs) based on tetraalkylphosphonium cations even at temperatures below 100 °C. In the case of ILs with acetate, decanoate, or dicyanamide anions, dark red to purple colored solutions form. A study combining NMR, UV-Vis and Raman spectroscopy revealed the formation of tellurium anions (Te_n)²⁻ with chain lengths up to at least n=5, which are in dynamic equilibrium with each other. Since external influences could be excluded and no evidence of an ionic liquid reaction was found, disproportionation of the tellurium is the only possible dissolution mechanism. Although the spectroscopic detection of tellurium cations in these solutions is difficult, the coexistence of tellurium cations, such as (Te₄)²⁺ and (Te₆)⁴⁺, and tellurium anions could be proven by cyclic voltammetry and electrodeposition experiments. DFT calculations indicate that electrostatic interactions with the ions of the ILs are sufficient to stabilize both types of tellurium ions in solution.     

Applications of ionic liquids in electrochemical sensors

Ionic liquids (ILs) are molten salts with the melting point close to or below room temperature. They are composed of two asymmetrical ions of opposite charges that only loosely fit together (usually bulky organic cations and smaller anions). The good solvating properties, high conductivity, non-volatility, low toxicity, large electrochemical window (i.e. the electrochemical potential range over which the electrolyte is neither reduced nor oxidized on electrodes) and good electrochemical stability, make ILs suitable for many applications. Recently, novel ion selective sensors, gas sensors and biosensors based on ILs have been developed. IL gels were found to have good biocompatibility with enzymes, proteins and even living cells. Besides a brief discussion of the properties of ILs and their general applications based on these properties, this review focuses on the application of ILs in electroanalytical sensors.