Guest controlled aggregation of amphiphilic sulfonatomethylated calix[4]resorcinarenes in aqueous solutions

Supramolecular nanoaggregates formed through the association of amphiphilic sulfonatomethylated calix[4]resorcinarenes with different substituents on the lower rim (methyl, pentyl, heptyl) and number of aromatic, aliphatic, and cationic guests differing in their shapes and sizes were investigated in aqueous solution by various NMR techniques ((1)H, 2D NOESY, FT-PGSE). It was shown that slight variations of the alkyl chain length on the lower rim of calixresorcinarenes dramatically change their aggregation behavior. Unlike the other calixresorcinarenes studied, the "head-to-tail" packing mode is observed for calixresorcinarene with pentyl moieties on the lower rim, which is unusual for amphiphilic calixarene aggregates. This calixresorcinarene demonstrates the stronger binding capacity toward the guest molecules due to their encapsulation into the capsule-like aggregate subunits. The guest-host complexation modifies the properties of both components, with the size of the resulted colloid particles being controlled by the guest nature.     

Synthesis and characterization of upper and lower rim functionalized [6]cavitands

A [6]cavitand has been selectively derivatized on both the lower and upper rims. On the lower rim, two out of six potential sites were oxidized to produce a 1,4 substituted [6]cavitand bisketone, which was converted to a corresponding diol as well as a bisacetate [6]cavitand. The crystal structures of the bisketone and the diol were solved. On the upper rim, all six ArCH(3) groups were selectively brominated to ArCH(2)Br groups to produce the hexabromomethyl [6]cavitand, which was converted to the corresponding hexabenzylthiol and hexabenzylthioacetate [6]cavitands. The conformational properties of all compounds are discussed.     

Conformational Diversity in Partially Fluorinated N-Alkyl Pipecolic Acid Amide Derivatives

The molecular and crystal structures of 19 N-alkyl-substituted pipecolamide derivatives with partial fluorination of N-propyl and N-butyl groups are presented. Fluorination patterns include one F-atom at internal or terminal locations, two F-atoms in geminal or vicinal arrangements at various positions, as well as terminal trifluoromethylation. Due to the presence of the carboxamide side chain in pipecolamide derivatives, enantiomeric fluorination patterns in the N-alkyl group result in diastereomeric compounds, which exhibit dramatically different crystal and molecular structures. An extraordinary conformational diversity is diagnosed for the various N-alkylpiperidine units. Structural comparisons and theoretical assessments based on extensive force field calculations provide insight into consistent conformational patterns that point to intramolecular factors as well as intermolecular modulations due to crystal packing effects.     

Surface properties and liquid crystal alignment behavior of poly(2-hydroxyethyl methacrylate) derivatives with alkyl ester side chains

Poly(2-hydroxyethyl methacrylate) derivatives with amphiphilic side chains composed of polar ester and non-polar alkyl groups (PHEMA#C, #=9, 11, 13, 15, and 17), where # is the number of carbon atoms in the alkyl side groups, were synthesized. In this paper, the influence of ester and alkyl groups on the molecular structure and wettability of the polymers were studied through varying # in the alkyl side groups. PHEMA#Cs with relatively longer alkyl side groups (#≥15) show bilayer lamellar structures with well aligned side chains giving rise to the very low surface energies, calculated from advancing contact angles, in the range of 22.7-22.8 mN/m. In contrast, PHEMA#Cs with shorter alkyl side groups with #≤13 have disordered structures on the polymer surfaces and stick-slip behavior was observed when water was used as the test liquid for the advancing contact angle measurements. Furthermore, the alignment behavior of nematic liquid crystal, 5CB on the PHEMA#C films could be correlated with the molecular structure and wettability of the polymers.     

Partially O-alkylated thiacalix[4]arenes: synthesis, molecular and crystal structures, conformational behavior

NMR spectroscopy, X-ray diffraction analysis, and quantum chemical calculations were used for conformational behavior study of partially alkylated thiacalix[4]arenes bearing methyl (1), ethyl (2), or propyl (3) groups at the lower rim. The conformational properties are governed by two basic effects: (i) stabilization by intramolecular hydrogen bonds, and (ii) sterical requirements of the alkoxy groups at the lower rim. While the monosubstituted derivatives 1a and 3a adopt the cone conformation in solution, distally disubstituted compounds 1b, 1'b, 2b, 2'b, 3b, and 3'b exhibit several interesting conformational features. They prefer pinched cone conformation in solution, and, except for 3'b, they form also 1,2-alternate conformation, which is flexible and undergoes rather fast transition between two identical structures. The crystal structures of the compounds 1b, 2b, 2'b, and 3b revealed yet quite rare 1,2-alternate conformation forming molecular channels held together by pi-pi interactions. Different channels-with hexagonal symmetry, 0.26 nm wide-are formed in the crystal structure of the pinched cone conformation of 3b. An uncommon hydrogen bonding pattern was found in dimethoxy and dipropoxy derivatives 1'b and 3'b that adopt distorted cone conformations in crystal. Trialkoxy-substituted compounds 1c and 3c adopt the partial cone conformation in solution. A higher mobility of methyl derivative 1c enables also existence of the cone conformer.     

Conformational pseudopolymorphism and orientational disorder in two-dimensional alkyl carbamate crystals

The structures of self-assembled physisorbed monolayers of alkyl carbamates were examined with atomic detail by scanning tunneling microscopy at the liquid-solid interface. Through systematic variation of molecular structure, the factors determining the two-dimensional crystal packing and dynamics of alkyl carbamate monolayers were isolated. Two different conformational pseudopolymorphs on the surface were observed and their order of stability was varied by changing the length of the alkyl groups. The relative size of the two alkyl groups in a molecule affected the frequency of orientational flipping within a column, which in turn, exerts an influence on the relative orientation of the two-dimensional crystalline domains. These phenomena were explained on the basis of the preferred hydrogen-bonding geometry of the carbamate functional group and the different degree of van der Waals interaction for each form.     

Resorcinarene bis-crown silver complexes and their application as antibacterial Langmuir-Blodgett films

Silver complexes of a cation binding supramolecular host, resorcinarene bis-crown (CNBC5) with propyl, nonyl, decyl and undecyl alkyl chains were investigated by NMR titration, picrate extraction and single crystal X-ray diffraction. Binding studies showed that both 1 : 1 and 1 : 2 (host-Ag(+)) complexes are present in solution with only a slight effect of the lower rim alkyl chain length on the binding constants (log K 4.0-4.2 for 1 : 2 complexes). Solid state complexes of the resorcinarene bis-crowns bearing either C(3) or C(11) chains were obtained. Single crystal X-ray analyses showed that both derivatives bind silver ions by metal-arene and Ag···O coordination from the crown ether bridges and from the solvent, and pack in layered or bilayered fashion. Furthermore, the amphiphilic nature of C11BC5 was demonstrated using the Langmuir balance technique. Langmuir-Blodgett films of the amphiphilic C11BC5-Ag complex were transferred onto a substrate and shown to possess antibacterial activity against E. coli.     

Molecular Packing and Solid-State Photophysical Properties of 1,3,6,8-Tetraalkylpyrenes

The relationship between the photophysical properties and molecular orientation of 1,3,6,8-tetraalkylpyrenes in the solid state is described herein. The introduction of alkyl groups with different chain structures (in terms of length and branching) did not affect the photophysical properties in solution, but significantly shifted the emission wavelengths and fluorescence quantum yields in the solid state for some samples. Pyrenes bearing ethyl, isobutyl, or neopentyl groups at the 1-, 3-, 6-, and 8-positions showed similar emission profiles in both the solution and solid states. In contrast, pyrenes bearing other alkyl groups exhibited an excimer emission in the solid state, similar to that of the parent pyrene. On studying the photophysical properties in the solid state with respect to the obtained crystal structures, the observed solid-state photophysical properties were found to depend on the relative position of the pyrene chromophores. The solid-state photophysical properties can be controlled by the alkyl groups, which provide changing crystal packing. Among the pyrenes tested, 1,3,6,8-tetraethylpyrene showed the highest fluorescence quantum yield of 0.88 in the solid state.     

Crystal Engineering of Supramolecular 1,4-Benzene Bisamides by Side-Chain Modification – Towards Tuneable Anisotropic Morphologies and Surfaces

Benzene bisamides are promising building blocks for supramolecular nano-objects. Their functionality depends on morphology and surface properties. However, a direct link between surface properties and molecular structure itself is missing for this material class. Here, we investigate this interplay for two series of 1,4-benzene bisamides with symmetric and asymmetric peripheral substitution. We elucidated the crystal structures, determined the nano-object morphologies and derived the wetting behaviour of the preferentially exposed surfaces. The crystal structures were solved by combining single-crystal and powder X-ray diffraction, solid-state NMR spectroscopy and computational modelling. Bulky side groups, here t-butyl groups, serve as a structure-directing motif into a packing pattern, which favours the formation of thin platelets. The use of slim peripheral groups on both sides, in our case linear perfluorinated, alkyl chains, self-assemble the benzene bisamides into a second packing pattern which leads to ribbon-like nano-objects. For both packing types, the preferentially exposed surfaces consist of the ends of the peripheral groups. Asymmetric substitution with bulky and slim groups leads to an ordered alternating arrangement of the groups exposed to the surface. This allows the hydrophobicity of the surfaces to be gradually altered. We thus identified two leitmotifs for molecular packings of benzene bisamides providing the missing link between the molecular structure, the anisotropic morphologies and adjustable surface properties of the supramolecular nano-objects.     

梳状高分子烷基侧链构象和堆积结构的红外光谱研究

以正十九烷和两种接枝烷基链的梳状高分子N-十八烷基聚乙烯亚胺(PEI18C)、N-十八烷基聚对苯甲酰胺(PBA18C)为研究对象,利用红外光谱对处于受限和自由状态的烷基链的构象和堆积结构随温度的变化进行了对比研究.结果表明,处于受限和自由状态的烷基链的构象排列和堆积结构及其转变行为不同,且受限于柔性PEI主链和刚性PBA主链的烷基链也不相同.从主链刚性的角度,探讨了影响烷基侧链构象和堆积结构的原因.     

Preparation of macrocyclon analogues: calix[8]arenes with extended polyethylene glycol chains

A one-pot methodology has been developed for the preparation of macrocyclon mimics, i.e., calix[8]arenes containing hydrophobic alkyl substituents on the upper rim and hydrophilic polyethylene glycol chains on the lower rim. Compounds containing PEG chains of up to 24 repeating ethylene oxide (EO) units can be prepared. With increasing molecular weight, these amphiphilic compounds can be classified as macromolecules, and can be difficult to characterise as single molecules. The limitations of conventional analytical techniques are discussed.     

Synthesis of calix[4]arenes modified with germanium‐containing side chains on the upper rim

With the expectation to prepare a new type of heteroditopic host, a series of calix[4]arenes modified with germanium‐containing side chains at the upper rim was prepared. Compounds 1 and 2 bear two or four triethylgermyl moieties respectively, and compounds 3 and 4 bear two or four trimethylgermyl moieties respectively. For 1 and 2 , the hydroxy groups at the lower rim are either tosylated (series a) or kept free (series b). For reference, a carbon analog of 3 , compound 5 , was also prepared. Unfortunately, all calixarenes prepared failed to show any appreciable cation transport property, indicating that the structure designed, i.e. a calixarene with germanium‐containing side chains at the upper rim, cannot meet the requirement for an appropriate heteroditopic host. Copyright © 2004 John Wiley & Sons, Ltd.     

Functionalization of Calix[4]resorcinolarenes with Trimethylsilyl Isocyanate

Calix[4]resorcinolarenes and their dialkylaminomethylated derivatives react with trimethylsilyl isocyanate to form addition products containing four silylcarbamate groups. These compounds are unstable and, depending on the nature of alkyl groups at the lower rim of the macrocycle, undergo two types of transformations. Intramolecular silylation yields calixarenes containing four carbamate and four trimethylsilyloxy groups at the upper rim. In the case of dialkylaminomethylated calixarenes, the initially formed addition products can undergo intramolecular cyclization to form a cavitand with four six-membered fragments at the upper rim.     

The trapezoidal cylinder phase: a new mode of self-assembly in liquid-crystalline soft matter

A new rectangular columnar liquid crystalline phase with p2gg lattice is reported, which represents a polygonal cylinder array composed of cylinders with trapezoidal cross section. In these polygonal cylinders, one of the sides has a different length and is composed of a different material than the others. This tiling pattern was obtained in two series of T-shaped facial amphiphilic triblock molecules in which a rigid rod-like p-terphenyl core is substituted laterally by a polar and flexible oligoethylene glycol chain, terminated either by a hydrogen-bonding COOH group or by a Li carboxylate group, and having identical or different alkyl groups in the terminal positions. The trapezoidal cylinder phase provides an improved packing for relatively long and rigid alkyl chains at lower temperature and more space inside the polygonal cylinders than triangular cylinders. This combination of conformational and space-filling effects leads to different phase sequences. The trapezoidal cylinder phases pave the way to a new level of complexity in LC engineering and show the huge potential of the general concept of polyphilic tectons for the design of new complex soft matter structures.     

Substitution controlled molecular orientation and nanostructure in the Langmuir-Blodgett films of a series of amphiphilic naphthylidene-containing Schiff base derivatives

Three amphiphilic Schiff bases containing naphthylidene group, N-octadecyl-2'-hydroxy-naphthalenylideneamine (HNOA-1), N-(4'-octadecyloxy)-2'-hydroxy-naphthalenylideneaniline (HNOA-2), and N-(4'-N-octadecylbenzamide)-2'-hydroxy-naphthalenylideneaniline (HNOA-3), were designed and their interfacial assemblies were investigated. These amphiphiles have different substitution groups in the Schiff base moiety. It was observed that HNOA-1, being in lack of second aromatic ring, formed multilayer films at the air/water interface, while the other two compounds, with another aromatic ring and some hydrophilic groups, can be spread as monolayers on water surface. All of Schiff bases could coordinate with Cu(Ac)2 in situ in the spreading films. Both the spreading films from water and aqueous Cu(Ac)2 subphases were transferred onto solid substrates and their surface morphologies as well as molecular packing modes were investigated by a series of methods such as atomic force microscopy, Fourier transform infrared spectra and X-ray diffraction. Depending on the different substitutions, these amphiphiles showed different orientations in the Langmuir-Blodgett films. Particularly, during the process of complex formation at the air/water interface, great conformational change of the alkyl chain was observed for HNOA-2 in comparison with that of other compounds. In addition, nanofiber structures were observed for the Cu(II)-complexed HNOA-1 and HNOA-2 films.     

N-linked peptidocalix[4]arene bisureas as enantioselective receptors for amino acid derivatives

Bisurea calix[4]arenes 1 and 2 possessing L-amino acid moieties at the lower rim were synthesized by reaction of the methyl esters of glycine, L-alanine, or L-isoleucine with the appropriate isocyanate (12 or 13), obtained with a safe and efficient Curtius rearrangement from the corresponding carboxylic acid derivatives. The conformational properties of the ligands 1 and 2 were investigated by means of a combined NMR and molecular modeling study which evidences that they are deeply influenced by strong intramolecular H-bonds between the urea NH groups and the vicinal phenolic oxygen atoms or the opposite urea C=O group. Complexation studies performed by ESI-MS and NMR spectroscopy in acetone solution show that the binding ability of these bisurea hosts decreases by increasing the side chain size of the amino acid. Host 2b has a remarkable binding ability for the N-acetyl-D-phenylalaninate anion with an interesting enantioselectivity (KDass/KLass=4.14), which is explained on the basis of a three-point interaction mode of binding.     

Synthesis,characterization, and tunable semiconducting properties of aza-BODIPY derived polycyclic aromatic dyes

Azadipyrromethene derived polycyclic aromatic complexes(HBPs) containing thirteen fused rings have been synthesized,which show highly selective intense absorption in the near infrared spectrum(NIR) region with high photo-and thermo-stability.The periphery alkoxy and alkyl substituents greatly affect their molecular packing structures in thin films and their thin film transistor performances. With the simple changes of the alkyl substituents, the packing structures changed from discrete-grain with H-aggregation type absorption to lamellar packing with J-aggregation type absorption, and the semiconducting properties were modulated from p-type to interesting ambipolar-type in solution-processed organic field effect transistors(OFETs) with hole and electron mobilities reaching to 0.42 and 0.17 cm~2 V~(-1) s~(-1), respectively.     

Virus-sized DNA nanoparticles for gene delivery based on micelles of cationic calixarenes

Macrocyclic amphiphilic molecules based on calix[4]arenes are highly attractive for controlled supramolecular assembly of DNA into small nanoparticles, since they present a unique conical architecture and can bear multiple charged groups. In the present work, we synthesized new amphiphilic calixarenes bearing cationic groups at the upper rim and alkyl chains at the lower rim. Their self-assembly in aqueous solution was characterized by fluorescent probes, fluorescence correlation spectroscopy, dynamic light scattering, gel electrophoresis and atomic force microscopy. We found that calixarenes bearing long alkyl chains (octyl) self-assemble into micelles of 6 nm diameter at low critical micellar concentration and present the unique ability to condense DNA into small nanoparticles of about 50 nm diameter. In contrast, the short-chain (propyl) analogues that cannot form micelles at low concentrations failed to condense DNA, giving large polydisperse DNA complexes. Thus, formation of small DNA nanoparticles is hierarchical, requiring assembly of calixarenes into micellar building blocks that further co-assemble with DNA into small virus-sized particles. The latter showed much better gene transfection efficiency in cell cultures relative to the large DNA complexes with the short-chain analogues, which indicates that gene delivery of calixarene/DNA complexes depends strongly on their structure. Moreover, all cationic calixarenes studied showed low cytotoxicity. Thus, this work presents a two-step hierarchical assembly of small DNA nanoparticles for gene delivery based on amphiphilic cone-shaped cationic calixarenes.     

Heat-set gels and egg-like vesicles using two component gel system based on chiral calix[4]arenes

Chiral calix[4]arenes bearing long tertiary alkyl groups at the upper rim and S-1-phenylethylamine groups at the lower rim can form heat-set gels and egg-like vesicles enantioselectively with d-2,3-dibenzoyltartaric acid in cyclohexane, which is the first example of heat-set gels resulting from difference in interactions between two component gelators: in addition, the diameter of vesicles decreased with the increase in length of alkyl groups, which could be used to control the size of the vesicles.     

Glycine Substitution Effects on the Supramolecular Morphology and Rigidity of Cell-Adhesive Amphiphilic Peptides

Self-assembling peptides that are capable of adopting β-sheet structures can generate nanofibers that lead to hydrogel formation. Herein, to tune the supramolecular morphologies, mechanical properties, and stimuli responses of the hydrogels, we investigated glycine substitution in a β-sheet-forming amphiphilic peptide. Glycine substitution generally enhances conformational flexibility. Indeed, glycine substitution in an amphiphilic peptide weakened the hydrogels or even inhibited the gelation. However, unexpectedly, glycine substitution at the center of the peptide molecule significantly enhanced the hydrogel stiffness. The central glycine substitution affected the molecular packing and led to twisted β-sheet structures and to nanofiber bundling, which likely led to the stiffened hydrogel. Importantly, the supramolecular structures were accurately predicted by molecular dynamics simulations, demonstrating the helpfulness of these techniques for the identification of self-assembling peptides. The hydrogel formed by the amphiphilic peptide with the central glycine substitution had cell adhesive function, and showed a reversible thermal gel-to-sol transition. Thus, glycine substitution is effective in modulating self-assembling structures, rheological properties, and dynamics of biofunctional self-assembling peptides.