葡萄糖-6-磷酸功能化亲水磁探针：有效分离富集糖肽/磷酸肽的双用途亲和材料

在Fe₃O₄磁芯上通过逐层修饰构建了葡萄糖-6-磷酸(G6P)功能化亲水磁探针Fe₃O₄@PDA@TiO₂@G6P. 聚多巴胺(PDA)可以作为偶联连接剂进一步接枝二氧化钛(TiO₂); 接枝的TiO₂除作为G6P的锚定位点外, 还 可通过金属氧化物亲和层析技术有效富集磷酸肽; G6P的官能化赋予了纳米球高亲水性的表面, 并利用亲水作用液相色谱法实现了糖肽的捕捉. 实验结果表明, 探针对糖肽具有低的检出限(0.1 fmol/μL)、 高的选择性 [m(HRP)∶m(BSA)=1∶1000]、 良好的重复性(10次循环)和高的负载量(300 mg/g); 对磷酸肽具有低的检出限(0.02 fmol/μL)和高的选择性[n(β-casein)∶n(BSA)=1∶1000). 此外, 这种双用途亲和材料具有同时富集糖肽和磷酸肽的能力,可从人唾液中鉴定出34个糖肽和36个磷酸肽, 表明其在多种翻译后修饰的蛋白质组学分析中具有巨大的应用前景.     

氧化铁负载铂纳米簇催化卤代硝基苯本体氢化性质研究

复相金属催化剂中的载体效应研究具有重要意义。我们以结构不同的氧化铁载体吸附"非保护型"Pt金属纳米簇制备了具有相同Pt纳米簇的Pt/Fe_3O_4、Pt/γ-Fe_2O_3和Pt/α-Fe_2O_3催化剂,考察了其在无溶剂条件下(本体条件)催化邻氯硝基苯(o-CNB)选择性氢化反应的性能,发现三种铂/氧化铁催化剂的催化选择性远高于商购铂/碳催化剂,Pt/γ-Fe_2O_3和Pt/α-Fe_2O_3的催化选择性明显高于Pt/Fe_3O_4,而Pt/Fe_3O_4的催化活性较Pt/α-Fe_2O_3高50%。铂/氧化铁对不同卤代硝基苯的本体选择性氢化反应表现出优良的催化性能,相应卤代苯胺产物的选择性均可达到99%以上。考察了温度、氢气压力对Pt/Fe_3O_4催化o-CNB本体氢化性能的影响。本工作为理解氧化铁负载金属纳米簇催化剂的特殊催化性质,进而发展高效金属纳米簇基催化体系提供了新的基础。     

A highly selective magnetic sensor with functionalized Fe/Fe3O4 nanoparticles for detection of Pb2+

A magnetic sensor for detection of Pb~(2+) has been developed based on Fe/Fe_3O_4 nanoparticles modified by3-(3,4-dihydroxyphenyl)propionic acid(DHCA). The carboxyl groups of DHCA have a strong affinity to coordination behavior of Pb~(2+) thus inducing the transformation of Fe/Fe_3O_4 nanoparticles from a dispersed to an aggregated state with a corresponding decrease, then increase in transverse relaxation time(T_2) of the surrounding water protons. Upon addition of the different concentrations of Pb~(2+) to an aq. solution of DHCA functionalized Fe/Fe_3O_4 nanoparticles(DHCA-Fe/Fe_3O_4 NPs)([Fe] = 90 mmol/L), the change of T_2 values display a good linear relationship with the concentration of Pb~(2+) from 40 μmol/L to 100 μmol/L and from 130 μmol/L to 200 μmol/L, respectively. Owing to the especially strong interaction between DHCA and Pb~(2+), DHCA-Fe/Fe_3O_4 NPs exhibited a high selectivity over other metal ions.     

表面钒修饰对α-Fe2O3材料光电化学性能的增强作用

对半导体材料进行表面化学修饰或改性,是提高其光催化活性、有效利用光能的一种重要措施.本文结合水热化学法、化学池沉积和后续热处理等,分别制备了未修饰α-Fe₂O₃和钒修饰的α-Fe₂O₃光电极材料.利用X射线粉末衍射(XRD)谱和紫外-可见漫反射光谱(UV-Vis-DRS)技术分析表征了材料的晶相结构、化学组成和光谱吸收等固体物理化学性能;利用光电流测量和电化学交流阻抗谱(EIS)实验技术,并基于1 mol·L^-1NaOH (pH 13.6)中的光电化学水分解反应,研究了钒修饰对α-Fe₂O₃材料光电化学性能的增强作用.结果表明,与未修饰的Fe₂O₃材料相比,钒修饰α-Fe₂O₃样品出现FeVO₄的XRD特征峰,但临界光吸收波长未发生红移;钒修饰使Fe₂O₃材料的光电流增大4-5倍、光生载流子在电极表面的复合几率降低了3/4-4/5、电极表面电荷传递速率(表观一级速率常数)明显提高.结合Fe₂O₃/溶液界面半导体能带模型和有关研究结果,分析了研究体系的界面电荷动力学传输过程以及钒修饰使α-Fe₂O₃材料光电化学性能增强的原因.     

磁性碱木素胺稳定的Ru纳米粒子催化α-蒎烯加氢反应

通过Mannich反应在碱木素结构中引入胺源,再结合共沉淀法制备了包裹Fe₃O₄磁核的稳定金属粒子的碱木素胺载体,并进一步构建了催化可再生资源α-蒎烯加氢反应的Ru纳米粒子催化剂.通过元素分析、粉末X射线衍射、傅里叶变换红外光谱、电感耦合等离子体原子发射光谱、透射电子显微镜、热重分析和X射线光电子能谱等方法对该催化剂进行表征.结果表明,碱木素中的苯环和含氧基团均对金属粒子有稳定作用,但胺源的引入可更加有效地稳定金属粒子.经过对催化剂制备工艺、木质素类型、胺源类型和胺源含量的筛选,得到活性最优的催化剂Fe₃O₄@0.8ALN₁-Ru, Ru负载量为1.92 mmol/g, Ru粒子粒径为(2.1±0.5)nm.该催化剂在n(α-蒎烯)/n(Ru)=65.8, 1 MPa H₂条件下70℃催化1 mLα-蒎烯加氢反应2 h,可获得99.64%的α-蒎烯转化率和96.52%的顺式蒎烷选择性,并表现出良好的重复使用稳定性.     

MgO和Fe2O3的添加对GDCSi体系微观结构及电化学性能的影响

采用溶胶凝胶法制备Gd_0.2Ce_0.8O_3-δ +0.05%（质量分数）SiO₂（GDCSi）电解质。在GDCSi体系中加入Fe₂O₃及MgO可达到降低烧结温度的同时提高晶界电导率，并减小杂质SiO₂对氧离子在晶界处传输的阻碍的目的。将MgO和Fe₂O₃单掺杂或双掺杂在GDCSi体系中并对GDCSi基电解质的微观形貌及电性能进行研究。结果表明，所有样品主要由立方萤石结构相组成；物质的量分数4%MgO单掺杂的GDCSi-M、物质的量分数4%Fe₂O₃单掺杂的GDCSi-F以及物质的量分数2%MgO-物质的量分数2%Fe₂O₃共掺杂的GDCSi-MF均可促进GDCSi体系晶粒增长，降低晶粒间孔隙率，提高电解质的相对密度，降低晶粒电阻R_gi、晶界电阻R_gb及总电阻R_t；GDCSi-MF具有最高晶界电导率和总电导率，在400 ℃时GDCSi-MF的晶界电导率σ_gb和总电导率σ_t分别是GDCSi的10.41和1.82倍。     

Preparation of Functionalized Fe3O4@SiO2 Magnetic Nanoparticles for Monoclonal Antibody Purification

Magnetic Fe₃O₄@SiO₂ nanoparticles with superparamagnetic properties were prepared via a reverse mi-croemulsion method at room temperature. The as-prepared samples were characterized by transmission electron mi-croscopy(TEM), X-ray diffractometry(XRD), and vibrating sample magnetometry(VSM). The Fe₃O₄@SiO₂ nanoparticles were modified by (3-aminopropyl)triethoxysilane(APTES) and subsequently activated by glutaraldehyde(Glu). Protein A was successfully immobilized covalently onto the Glu activated Fe₃O₄@SiO₂ nanoparticles. The adsorption capacity of the nanoparticles was determined on an ultraviolet spectrophotometer(UV) and approximately up to 203 mg/g of protein A could be uniformly immobilized onto the modified Fe₃O₄@SiO₂ magnetic beads. The core-shell of the Fe₃O₄@SiO₂ magnetic beads decorated with protein A showed a good binding capacity for the chime-ric anti-EGFR monoclonal antibody(anti-EGFR mAb). The purity of the anti-EGFR mAb was analyzed by virtue of HPLC. The protein A immobilized affinity beads provided a purity of about 95.4%.     

纳米Fe2O3和Fe3O4的制备及其催化高氯酸铵热分解性能的研究——一个仪器分析综合实验

介绍一个仪器分析综合实验——纳米Fe_2O_3和Fe_3O_4的制备及其催化高氯酸铵热分解性能的研究。采用水热法合成纳米Fe_3O_4,进而煅烧得到纳米Fe_2O_3。使用X射线粉末衍射(XRD)对制得的样品结构进行表征,通过透射电镜(TEM)可以发现其为球形颗粒,粒径在10–20 nm范围内。将制得的纳米Fe_2O_3和纳米Fe_3O_4按不同比例加入高氯酸铵(AP)中,通过对混合物进行热分析(TG-DSC),发现纳米Fe_2O_3和纳米Fe_3O_4可以明显促进AP的分解,且Fe_2O_3的催化效果优于Fe_3O_4的催化效果,并对催化机理进行了简单讨论。通过该实验,可以让学生学习水热反应的方法,掌握利用XRD、热分析等多种手段对化合物结构及性能进行表征的技能。     

Vc-Functionalized Fe3O4 Nanocomposites as Peroxidase-like Mimetics for H2O2 and Glucose Sensing

A simple and efficient colorimetric biosensing for hydrogen peroxide and glucose with peroxidase-like vitamin C(V_c) functionalized Fe₃O₄ magnetic nanoparticles(V_c/Fe₃O₄MNPs) as a catalyst is reported. Compared with Fe₃O₄ MNPs and other catalysts, V_c/Fe₃O₄ MNPs exhibited superior catalytic properties. Kinetic studies indicated that vitamin C incorporated on Fe₃O₄ MNPs improved the affinity toward H₂O₂. As low as 0.29 μmol/L H₂O₂ can be detected with a wide linear range of 0.5—100 μmol/L H₂O₂; moreover, as low as 0.288 μmol/L glucose can be detected with a linear range of 0.5—25 μmol/L glucose. The detection method was highly sensitive in sensing H₂O₂ and glucose. The robustness of V_c/Fe₃O₄ MNPs rendered them suitable for wide ranging applications.     

Effect of Support on Catalytic Performance of Photothermal Fischer-Tropsch Synthesis to Produce Lower Olefins over Fe5C2-based Catalysts

Photothermal Fischer-Tropsch synthesis(FTS) has been extensively studied, but few reports were focused on systematically exploring the influence of support on catalytic performance. Herein, a series of Fe₅C₂-based catalysts with different supports was fabricated via a one-step wet-chemical method for photothermal conversion of syngas to lower olefins. Under light irradiation, the optimized Fe₅C₂/α-Al₂O₃ catalyst demonstrated remarkable photothermal FTS activity, delivering selectivity to lower olefins of 50.3% with a CO conversion rate of 52.5%. Characterization studies using X-ray diffraction and Mössbauer spectroscopy analysis revealed that the active catalyst mainly contained Fe₅C₂ nanoparticles on α-Al₂O₃ support. It was found that the weak interaction between active phase and α-Al₂O₃ could promote the formation of Fe₅C₂, which contributed to the high selectivity to lower olefins.     

Pt/Au/Fe3O4的制备及其电化学性能

以制得的纳米Fe₃O₄颗粒作为载体,用还原法将还原出的Au与Pt分别负载到Fe₃O₄颗粒表面,制得纳米Pt/Au/Fe₃O₄复合材料。对Pt/Au/Fe₃O₄进行紫外可见光吸收光谱、透射电子显微镜、X射线衍射及光电子能谱等物理表征,结果表明,Au与Pt均匀地沉积到了Fe₃O₄纳米颗粒表面。对纳米Pt/Au/Fe₃O₄复合材料进行循环伏安扫描,当H₂PtCl₆的加入量达到8 mL时,Pt/Au/Fe₃O₄催化性能最佳;正扫电流峰i_p与扫描速率的平方根v^1/2线性相关,Pt/Au/Fe₃O₄催化氧化甲醇的过程受扩散控制;对催化剂进行201次循环伏安扫描,催化剂仍然能保持较好的催化性能且稳定性良好。因此,所合成催化剂Pt/Au/Fe₃O₄是一种具有良好化学稳定性的阳极催化剂材料。     

Nanosized Pd assembled on superparamagnetic core–shell microspheres:Synthesis,characterization and recyclable catalytic properties for the Heck reaction

A series of magnetically recyclable Pd/Fe3O4@g-Al2O3 catalysts were synthesized using the superparamagnetic Fe3O4@g-Al2O3core–shell microspheres as the supporter and nano-Pd particles assembled on g-Al2O3 shell as the active catalytic component.The structure of the catalysts was characterized by X-ray diffraction(XRD),transmission electron microscopy(TEM),N2adsorption–desorption and vibrating sample magnetometer(VSM).The catalytic activity and the recyclability properties of the catalysts for the Heck coupling reaction with aryl bromides and the olefins were investigated.The results show that the microspheres of the magnetic Pd/Fe3O4@g-Al2O3 catalysts were about 400 nm and the nano-Pd particles assembled on g-Al2O3 shell were about 3–4 nm in size.The saturation magnetization(MS) of the magnetic catalysts was sufficiently high to allow magnetic separations.In the Heck coupling reactions,the magnetic Pd/Fe3O4@g-Al2O3 catalysts exhibited good catalytic activity and recyclability.With Pd/Fe3O4@g-Al2O3(0.021 mol%) catalyst,the bromobenzene conversion and product yield reached about 96.8% and 91.2%,respectively,at 120 8C and in 14 h.After being recycled for six times,the conversion of bromobenzene and the recovery of the catalyst were about80% and 90%,respectively.The nano-Pd particles were kept well dispersed in the used Pd/Fe3O4@g-Al2O3 catalysts.     

Aluminum-type superparamagnetic adsorbents: Synthesis and application on fluoride removal

Two effective types of superparamagnetic nano-scale adsorbents of bayerite/SiO₂/Fe₃O₄ have been synthesized via three sequential steps: chemical precipitation of Fe₃O₄, coating of SiO₂ on Fe₃O₄ using acidifying method, and further coating of bayerite (Al(OH)₃) on SiO₂/Fe₃O₄ adopting sol–gel (MASG) or homogeneous precipitation (MAHP) methods. The characteristics of MASG and MAHP were identified using the transmission electron microscopy (TEM) micrograph, scanning electron microscopy with energy dispersive X-ray spectroscopy (SEM/EDX), X-ray powder diffractometer (XRD), and superconducing quantum interference device (SQUID). Removal of fluoride from aqueous solution was examined to evaluate the adsorptive capacity of MASG, MAHP, and commercial activated alumina (CA), and the effects of enclosure of Fe₃O₄ with SiO₂ for SiO₂/Fe₃O₄, MASG, and MAHP particles. Among the adsorbents tested under the same experimental condition, MASG is the most effective adsorbent, of which the adsorption capacities are 38 g/kg (based on adsorbent mass of adsorption in terms of equilibrium constant q_L of Langmuir isotherm), and can compete with CA even at a high pH value. The innovative superparamagnetic adsorbents synthesized in this study possess physicochemical stability at pH range of 6–8 and great potential in the adsorption processes due to not only their high adsorption capacity but also the conveniently magnetic separation which can overcome the difficulty in solid–liquid separation for nano-particles in solutions.     

不同金属/适配体双功能复合磁性纳米材料的制备及其对外泌体的富集性能

外泌体作为一种细胞外囊泡,其内容物可以反映亲代细胞的重要信息,而自身也具有独特的结构,能够执行特征的生物学功能。基于外泌体的表面化学和生物学特征,制备了不同类型的金属/适配体(Apt)双功能复合磁性纳米材料,并将其应用于外泌体的富集纯化。将适配体和外泌体表面目标膜蛋白的特异性结合性能与以钛、锆为代表的金属氧化物和外泌体磷脂双层膜的特异性亲和作用结合,可极大地提高分离材料对外泌体的分离选择性和富集容量。分别以Fe₃O₄@Zr-MOFs、Fe₃O₄@Zr-Ti-MOFs和Fe₃O₄@TiO₂等金属有机框架(MOFs)/金属氧化物磁性纳米材料为基底,制备对应的双功能MOFs/金属氧化物-适配体复合磁性纳米材料Fe₃O₄@Zr-MOFs-Apt、Fe₃O₄@Zr-Ti-MOFs-Apt和Fe₃O₄@TiO₂-Apt,并进一步对不同材料的外泌体富集性能加以评价。以超速离心法提取的模型外泌体以及尿液为样品,对修饰相同质量适配体和不同含量金属氧化物的双功能材料的富集性能加以对比。将3种双功能磁性纳米材料应用于尿液外泌体的富集,得到的外泌体裂解后经质谱鉴定,分别得到233、343和832个外泌体蛋白。这一结果也表明双功能磁性纳米材料可以充分结合核酸适配体亲和的高选择性和金属氧化物的高富集容量优势,对于复杂生物样品中外泌体的快速、高效分离纯化具有潜在的应用价值,而针对材料制备和分离纯化方法的设计也为新型外泌体富集材料的设计提供了一条可行的新思路。     

三维有序大孔Fe2O3为载氧体的生物质热解气化实验研究

采用无皂乳液聚合法制备单分散聚苯乙烯(PS)微球,并以硝酸盐为原料、柠檬酸为络合剂制备前驱体溶液,通过浸渍和焙烧得到三维有序大孔(3DOM) Fe₂O₃,并通过SEM、XRD、BET和压汞仪对3DOM Fe₂O₃进行表征。采用热重-质谱联用的方法,以3DOM Fe₂O₃为载氧体,对生物质在氦气气氛下的热解气化进行研究,探讨3DOM Fe₂O₃载氧体在生物质热解气化过程中代替纯氧、富氧空气或水蒸气作为生物质气化剂的可能性,并与普通分析纯Fe₂O₃与生物质热解气化的实验结果进行对比,分析3DOM Fe₂O₃在提高载氧体反应活性方面的作用。结果表明,制备的3DOM Fe₂O₃呈现排列规整的三维有序多孔形貌,层与层间通过三维孔道相连,并呈交替排列。通过与分析纯Fe₂O₃的XRD谱图对比,发现制得的3DOM Fe₂O₃为纯Fe₂O₃,无其他杂质相的存在。热重-质谱分析结果表明,Fe₂O₃作为载氧体在高温段促成了生物质气化反应的发生。与分析纯的Fe₂O₃作对比,当载氧体为三维有序大孔结构时,生物质的最大失重率提高了7.1%,气化阶段的最大失重速率提高了0.29%/min,CO、CO₂、CH₄在高温段出现两个连续的析出峰。     

两种形貌纳米Fe2O3对TKX-50热分解的催化性能研究

Energy components used in solid rocket propellants are beneficial for improving the energy performance, and their thermal decomposition characteristics significantly affect the combustion properties of the propellants. As a kind of energetic material with both high energy and low sensitivity (impact and friction), 5, 5'-bistetrazole-1, 1'-diolate (TKX-50) can effectively improve the energy and safety characteristics of solid propellants. Burning catalyst is another important component of solid propellants, which can significantly improve the burning rate of the propellant and reduce the pressure exponent. Among various burning catalysts, nanoscale transition metal oxides can promote the thermal decomposition of the energetic component, thus enhancing the combustion properties of the solid propellant. However, the catalytic effects of nanoscale transition metal oxides with different morphologies on the thermal decomposition of TKX-50 have rarely been studied. Based on the excellent catalytic activity of Fe₂O₃ for TKX-50 thermal decomposition, nano-Fe₂O₃ particles with spherical and tubular microstructures were used for TKX-50 thermal decomposition. The Fe₂O₃ nanoparticles were successfully fabricated via the solvothermal method and characterized by scanning electron microscope (SEM), transmission electron microscope (TEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), and X-ray photoelectron spectroscopy (XPS) analyses. The XRD, FT-IR, and XPS results confirmed the successful fabrication of spherical and tubular Fe₂O₃ samples. The SEM and TEM images showed that the spherical Fe₂O₃ samples are composed of agglomerated Fe₂O₃ nanoparticles with an average particle size of 110 nm. In addition, the average diameter and length of hollow tubular Fe₂O₃ nanoparticles are 120 nm and 200 nm, respectively. The catalytic activities of spherical and tubular Fe₂O₃ for TKX-50 decomposition were studied by thermogravimetric analysis (TG) and differential scanning calorimetry (DSC) methods. The DSC and TG-DTG curves showed that both tubular and spherical Fe₂O₃ could effectively promote TKX-50 thermal decomposition. The first thermal decomposition peak temperature (T_FDP) of TKX-50 was reduced by 36.5 K and 26.3 K in the presence of tubular and spherical Fe₂O₃, respectively, at 10 K·min⁻¹. The activation energy (E_a) of TKX-50, determined by the iso-conversional method, was significantly reduced in the presence of both tubular and spherical Fe₂O₃. The results indicated that the microstructure of the catalyst has a significant effect on its catalytic performance for TKX-50 thermal decomposition, and that tubular Fe₂O₃ with hollow microstructure possesses better catalytic activity than spherical Fe₂O₃. The excellent catalytic activity of tubular Fe₂O₃ can be attributed to the hollow microstructure, which has more active sites for TKX-50 thermal decomposition.     

Preparation and Supercapacitive Properties of Fe2O3/Active Carbon Nanocomposites

Fe₂O₃/active carbon(Fe₂O₃/AC) nanocomposites were readily fabricated by pyrolyzing Fe³⁺ impregnated active carbon in a nitrogen atmosphere. The as-prepared composites were studied by X-ray powder diffraction(XRD), X-ray photoelectron spectroscopy(XPS) and transmission electron microscopy(TEM). The capacitive property of the composites was investigated by cyclic voltammetry(CV) and galvanostatic charge-discharge test. Physical characterizations show that the γ-Fe₂O₃ fine grains dispersed in the AC well, with a mean size of 21.24 nm. Electrochemical tests in 6 mol/L KOH solutions indicate that the as-prepared nanocomposites exhibited improved capacitive properties. The specific capacitance(SC) of Fe₂O₃/AC nanocomposites was up to 188.4 F/g that was derived from both electrochemical double-layer capacitance and pseudo-capacitance, which was 78% larger than that of pristine AC. A symmetric capacitor with Fe₂O₃/AC nanocomposites as electrode showed an excellent cycling stability. The SC was only reduced by a factor of 9.2% after 2000 cycles at a current density of 1 A/g.     

Effective Removal of Tetracycline by Using Biochar Supported Fe3O4 as a UV-Fenton Catalyst

Novel Fe3O4-decorate hierarchical porous carbon skeleton derived from maize straw(Fe3O4@MSC)was synthesized by a facile co-precipitation process and a calcination process,which was developed as a UV assisted heterogeneous Fenton-like catalyst.The as-synthesized catalysts were characterized via X-ray powder diffraction(XRD), scanning electron microscope(SEM),transmission electron microscope(TEM),Brunauer-Emmet-Teller(BET)and vibrating sample magnetometer(VSM)at room temperature.The morphology and structure analysis revealed that the as-prepared Fe3O4@MSC retained the original pore morphology of the maize straw material.The non-uniform poly- hedral Fe3O4 grew on the whole surface of the MSC,which reduced the aggragation of Fe3O4 and provided more active sites to strengthen the UV-assisted Fenton-like reaction.As a result,the tetracycline(TC)degradation efficiency after 40 min reaction and total organic carbon(TOC)removal efficiency after 2 h reaction of Fe3O4@MSC catalyzing UV-Fenton system reached 99.2%and 72.1%,respectively,which were more substantial than those of Fe3O4@MSC/H2O2(31.5%and 2%),UV/H2O2 system(68%and 23.4%)and UV/Fe3O4/H2O2(80% and 37.5%).The electron spin resonance(ESR)results showed that the ·OH played an important role in the catalytic reaction.A possible degradation pathway of TC was proposed on the basis of the identified intermediates.Overall,the UV assisted heterogeneous Fenton-like process in Fe3O4@MSC improved the cycle of Fe^3+/Fe^2+ and activated the interfacial catalytic site,which eventually realized the enhancement of degradation and mineralization to tetracycline.     

Pd/Fe3O4-C催化剂对甲醇、乙醇和丙醇氧化的电催化活性

制备对醇氧化反应具有优异电活性的钯催化剂是醇燃料电池研究的重要内容。本文用硼氢化钠还原法制备了钯纳米颗粒, 然后沉积在Fe3O4/C复合物表面, 得到了不同Fe₃O₄负载量的Pd/Fe₃O₄-C催化剂. 透射电镜（TEM）图显示钯纳米颗粒均匀地分散在Fe₃O₄/C表面. 对制备好的Pd/Fe₃O₄-C催化剂进行了循环伏安法（CV）、计时电流（CA）和电化学阻抗谱（EIS）的测试, 研究了其在碱性介质中对C1-C3醇类（甲醇、乙醇和丙醇）氧化的电催化活性. 结果表明, 所制备的不同Fe₃O₄负载量的Pd/Fe₃O₄(2%)-C,Pd/Fe₃O₄(5%)-C, Pd/Fe₃O₄(10%)-C和Pd/C催化剂中, Pd/Fe₃O₄(5%)-C催化剂表现出最高的醇氧化电流密度. 依据循环伏安（CV）数据,Pd/Fe₃O₄(5%)-C催化剂对甲醇、乙醇、正丙醇和异丙醇氧化的阳极峰电流密度分别是Pd/C催化剂的1.7、1.4、1.7和1.3倍. Pd/Fe₃O₄(5%)-C催化剂对乙醇氧化的电荷传递电阻也远低于Pd/C催化剂. 制备的所有催化剂对C1-C3醇类电氧化的电流密度大小排序如下: 正丙醇﹥乙醇﹥甲醇﹥异丙醇. 此外, 碳粉中Fe₃O₄纳米颗粒的存在提高了钯纳米颗粒的电化学稳定性.     

高碳铬铁在氢氧化钠水溶液中电化学氧化过程

铬铁电化学氧化法是一种新的制备铬酸钠的方法,然而高碳铬铁在NaOH水溶液中的电化学氧化过程尚不明确。 采用循环伏安法(CV)、稳态极化法(LSV)等电化学测试方法对金属铬、高碳铬铁在NaOH水溶液中的电化学氧化过程进行研究,通过扫描电子显微镜(SEM)、能量散射谱(EDS)和X射线光电子能谱(XPS)对高碳铬铁电解后固相产物表征,判断固相产物的组成。 结果表明,高碳铬铁不同于金属铬的电氧化过程,它在NaOH溶液中通过Cr(0)→Cr(Ⅵ)的电氧化方式生成铬酸钠,中间产物Cr(OH)₃和Fe(0)发生电化学反应生成稳定的FeCr₂O₄。 随着NaOH浓度的增加,电势较低时,受高碳铬铁中Fe(0)的影响,高碳铬铁容易在NaOH水溶液中发生钝化;当电势足够正时,钝化膜溶解,生成铬酸钠、氢氧化铁和亚铬酸亚铁,同时,阳极表面有氧气析出。 高碳铬铁电化学氧化制备铬酸钠的适宜条件:碱浓度≥2 mol/L,阳极电势≥1.6 V(vs.SCE)。