锂离子电池锡基合金体系负极研究

综述了锂离子电池锡基金属间化合物和复合物负极的研究进展。介绍了锡基合金体系作锂离子电池负极的优势, 指出了锡金属负极的不足,提出了采用锡基合金及其复合物是克服锡金属负极主体材料尺寸稳定问题的解决办法。概述了各种锡基合金和其复合物的结构、电化学性能、相应的加工方法和某些反应机理,总结了这些材料的优点和缺点,提出了改进这些材料性能的一些建议,如采用分散形态的纳米颗粒结构或用非晶合金并控制形态结构的转变,着重指出多相锡基锂合金复合物是最有前景的负极材料。     

锂离子电池锡-金属-碳复合负极材料

石墨作为锂离子电池的负极材料已经使用了很长时间。但由于其嵌锂容量低,已不能满足动力电池快速发展的需求。而锡可以与锂形成合金,有可能取代石墨成为下一代锂离子电池负极材料。但是单纯的金属锡在电池循环过程中发生巨大的体积变化,容易导致电极材料的粉化。而碳材料具有较高的导电性,良好的机械性能和储锂性能。为了充分发挥金属锡和碳材料的优势,锡-碳(Sn-C)复合材料得到了广泛研究。本文详细介绍了无定型碳、石墨(G)、石墨烯(GP)、碳纳米管(CNT)、碳纳米纤维(CNF)等碳材料作为惰性的导电基体与锡形成的二元复合物,阐述了锡与其它金属(M)形成的碳基三元、多元复合物的结构和性能。通过总结近些年对锡碳复合物结构与性能的研究,相信多元复合和多种结构的应用是提高锡-碳复合负极材料的关键。其中,以Sn-Co-C为基础的多元复合负极材料最有可能走向市场应用。     

纳米锡锌复合氧化物贮锂材料的合成和性质

用液相沉淀-热解法合成了一系列结构和组成不同的锂离子电池纳米锡锌复合氧化物贮锂材料, 通过XRD、TEM和电化学测试对材料进行了表征. 测试结果表明, 非晶态ZnSnO3负极材料的初始可逆贮锂容量为844 mA·h/g, ZnO·SnO2负极材料的初始可逆贮锂容量为845 mA·h/g, SnO2·Zn2SnO4复合物负极材料初始可逆贮锂容量为758 mA·h/g, 循环10周后, 三者的充电容量分别为695, 508和455 mA·h/g, 表明非晶态结构的锡锌复合氧化物具有较好的电化学性质, 随着样品中晶体的形成, 该类型负极材料的贮锂性能下降.     

Co-MOFs材料在锂离子电池负极材料中的应用研究进展

该文阐述了近年来钴金属有机骨架(Co-MOFs)材料在锂离子电池负极材料中的应用研究进展,分别对Co-MOFs材料及Co-MOFs衍生的氧化钴、氧化钴/碳复合材料、硫化钴/碳复合材料等用作锂离子电池负极材料进行了分类总结,旨在为广大研究者提供相关方面的信息.     

新型石墨化氮化碳/锡/氮掺杂碳复合物的制备及储钠性能

钠离子电池锡负极因具有较高的理论容量(847 mA·h/g)、 高电导率和合适的工作电位而备受关注. 但锡基负极材料在循环过程中会发生巨大的结构变化, 进而导致活性材料粉化失活和比容量的快速下降. 本文成功制备了基于石墨氮化碳(g-C₃N₄)、 聚多巴胺衍生的氮掺杂碳(NC)和Sn纳米颗粒的复合物(g-C₃N₄/Sn/NC), 其中Sn纳米颗粒包埋在石墨氮化碳和氮掺杂碳中. 在此多层分级结构中, g-C₃N₄和NC的引入可以显著加速电子/离子的传输及电池反应动力学, 从而有助于Sn和钠离子之间的合金化反应; 此外, 这种复合结构有助于保持电极材料的结构稳定性, 进而可以获得优异的储钠性能. 作为钠离子电池负极材料, g-C₃N₄/Sn/NC在0.5 A/g电流密度下经历100次循环, 可逆容量可以达到450.7 mA·h/g; 在1.0 A/g电流密度下, 比容量为388.3 mA·h/g; 此外, 在1.0 A/g电流密度下, 经过400次循环后其比容量依旧能达到363.3 mA·h/g.     

硅材料在锂离子电池负极中的应用研究进展

硅材料作为锂离子电池负极材料具有比容量大的优点，是高容量锂离子负极材料的研究热点之一。论文综述了近年来锂离子电池硅负极材料的研究进展。分别对硅和含硅材料作为锂离子电池负极材料的发展过程、充放电特性、储锂机理及影响其储锂的各因素进行了分析和总结，并对其存在的问题进行了分析。探讨了采用不同复合物、不同制备方法和合成硅化物等改性方法来提高其循环性能的可行性。指出纳米硅基复合物将是硅负极材料最有希望的发展方向。     

镁二次电池材料的国内外研究现状

综述了镁二次电池材料的国内外研究现状.从Mg电极在不同的电解质溶液中的电化学行为来看,除了获得一致好评的电解质Mg(AlCl2BuEt)2/THF外,国内研究了Mg(SnPh3)2/THF的性能,又尝试了复合电解质(PP13-TFSI)和(BMIMBF4)的混合,都很好得获得可逆的Mg的沉积和溶解.目前,国内、外对镁电池用的聚合物电解质(GPE)有了进一步的研究.利用PNA(聚丙烯腈)、PMMA(聚甲基丙烯酸甲酯)、PVDF(聚偏氟乙烯)和PC、EC、MgTr混合制备了GPE,同时日本合成的(PEO-PMA)-(EC-DMC)/Mg[(CF3SO2)2N]2(x-y)和PEO-PMA)-a mol%Mg(TFSI)2/EMITFSI(x-y),和韩国合成的P(VdF-co-HFP)其电导都大于10-4S·cm-1.虽然组装电池的循环性能不是很理想,但说明了GPE同样可以应用在镁电池中.从Mg正极材料的报道来看,目前大部分工作都是在开发钠米管、层状和复合材料.比如VOx/钛酸盐纳米棒、VXG/PANI复合物、VOx/PANI NCs、Cu0.1-doped VOx-NTs等,都有很好的首次放电比能量,循环性能不好的主要原因是镁负极钝化.上海交通大学尝试研究把的导电含硫材料/聚苯胺复合物做为正极材料,并组装成钮扣电池,其采用的电解质为0.25 M的Mg(AlCl2BuEt)2/THF.该钮扣电池多次循环之后放电比能量也可以达到72.7mAh/g,和锂离子电池相比,该复合物显示了较慢的Mg插入速率和较低的放电比容量,但实验结果已足够说明了导电含硫材料/聚苯胺复合物做为镁二次电池正极材料的可行性.目前紧迫的任务是,开发新型的正、负极材料,降低镁钝化电解质,开发新的负极材料,比如嵌入式的或合金负极材料.研究结果表明镁二次电池有着非常好的开发前景.     

锂离子电池锡基复合氧化物负极材料的研究

采用共沉淀法制备了SnSbO2.5和SnGeO3两种锡基复合氧化物粉末.XRD分析表明,这两种锡基复合氧化物的共同特点是在27°～28°处有波峰,属无定型结构.将其分别作为锂离子电池负极材料的活性物质,利用恒电流电池测试仪研究它们的电化学性能.实验表明,这两种锡基复合氧化物都有较高的电化学容量,SnSbO2.5的可逆容量为1200mA·h/g,SnGeO3的可逆容量为750mA·h/g.这两种锡基复合氧化物的电化学容量远高于碳材料(石墨的理论容量为372mA·h/g),因此,这两种锡基复合氧化物可以作为锂离子电池负极材料的候选材料.     

锂离子电池合金负极材料的研究进展

本文综述了锂离子电池合金负极材料的研究现状,对比了各种合金负极材料的制备方法,并指出了合金负极材料目前面临的主要问题及现有的解决方案,最后提出纳米锂合金复合物将是合金负极材料发展的最终出路.     

锂离子电池负极材料非晶态MgSnO3的合成和性能研究

锂离子电池金属氧化物负极材料越来越受到人们的重视.锡基氧化物贮锂材料具有能量密度较高、清洁无污染、原料来源广泛、价格便宜等优点,是金属氧化物类负极材料中极具发展潜力的一种负极材料.因此,近年来人们对这类材料开展了广泛的研究[1～6].     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Copper catalyzed/mediated synthetic methodology for ebselen and related isoselenazolones

Scope of the copper catalyzed/mediated selenium-nitrogen coupling reaction has been studied for the synthesis of isoselenazolones. It is noticed that the 2-chloro, 2-bromo-, and 2-iodo-aryl amides substrates can be exploited in the selenium-nitrogen coupling reaction by employing 25-100 mol % of CuI/1,10-phenanthroline (L) and potassium carbonate as a base in DMF. Furthermore, electron rich 2-chloro-arylamides also underwent selenium-nitrogen coupling reaction to give biologically important selenium-nitrogen heterocycles. Also, copper-catalyzed selenium-nitrogen coupling reaction has been meticulously applied for the synthesis of diaryl diselenides having methoxy, amine, and amide functionality from respective aryl iodides in the presence of stoichiometric amount of succinimide as an external Se-N coupling partner.     

Knoevenagel condensation catalyzed by novel Nmm-based ionic liquids in water

A series of novel N-methyl morpholine (Nmm) based ionic liquids with 1,2-propanediol group were synthesized and used as catalysts for Knoevenagel condensation at room temperature in water. Under the effect of the catalyst, various aldehydes or aliphatic ketones could react with a wide range of activated methylene compounds well, including malononitrile, alkyl cyanoacetate, cyanoacetamide, β-diketone, barbituric acid, 2-arylacetonitrile and thiazolidinedione. Furthermore, most of the products could be separated just by filtrating and washing with water. Additionally, the catalyst is recyclable and applicable for the large-scale synthesis.     

Construction of polyheterocyclic spirotetrahydrothiophene derivatives via sulfa-Michael/aldol cascade reaction

A series of polyheterocyclic spirotetrahydrothiophene derivatives were obtained in moderate to excellent yields via a catalyst-free sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 under mild conditions. We also present the first asymmetric sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 with moderate to good enantioselectivities catalyzed by readily available chiral phase-transfer catalysts (PTCs).     

Suzuki-Miyaura reactions of the soluble guanylate cyclase inhibitor NS2028: a non-product specific route to C-8 substituted analogues

Both soluble guanylate cyclase (sGC) inhibitors ODQ 1 and NS2028 2 are synthesized via improved protocols. In the former case treating 3,4-dihydroquinoxalin-2(1H)-one oxime 8, which can be prepared in two steps from 1,2-benzenediamine, with 1,1′-carbonyldiimidazole (CDI) gives the dihydro-ODQ 10 that in the presence of KMnO₄ oxidises to give ODQ 1 in an overall yield of 46% starting from 1,2-benzenediamine. In the latter case, the synthesis affords NS2028 2 from 2-amino-4-bromophenol 3 in three steps with an overall yield of 85% and avoids the need for chromatography. Furthermore, Suzuki-Miyaura reaction conditions are described that enable the preparation of 8-aryl and 8-heteroaryl derivatives of NS2028 directly from NS2028 2. Finally, demethylation of the 8-(methoxyphenyl) substituted analogues afforded the 8-(hydroxyphenyl) derivatives 40-42. All new products are fully characterised.