硫酸铜与氢氧化钠反应生成碱式盐的研究

通过实验定量研究了NaOH溶液与CuSO4溶液反应生成的沉淀物的组成.结果表明,CuSO4与NaOH反应生成的碱式盐只有Cu4(OH)6SO4;当反应物比例n(OH-)/n(Cu2+)≤1.5时,沉淀为Cu4(OH)6SO4,而当2≥n(OH-)/n(Cu2+)> 1.5时,产物为Cu4(OH)6SO4与Cu(OH)2的混合物,比例越大,Cu4(OH)6SO4含量越少,Cu(OH)2含量越多.在NaOH溶液滴加到CuSO4溶液的过程中,Cu(OH)2是由Cu4(OH)6SO4与OH-之间的反应生成的,且反应缓慢.     

(NBR/PVC)/CuSO_4复合材料中配位交联反应的研究

采用差示扫描量热法(DSC)和傅立叶转换红外光谱(FT-IR)对丁腈橡胶/聚氯乙烯合金/无水硫酸铜((NBR/PVC)/CuSO4)混合物的配位交联反应进行了研究.结果表明,(NBR/PVC)/CuSO4共混物在升温过程中出现两个放热峰,分别归因于腈基(—CN)和CuSO4之间的配位交联反应和体系中NBR/PVC的自交联反应.通过对共混物配位交联反应动力学参数的计算发现,混合物中CuSO4含量的多少并未对体系配位交联反应的进行产生影响.同时共混物中PVC的存在促进了配位交联反应的进行,降低了铜离子(Cu2+)与—CN之间配位交联反应的表观活化能Ea.     

Hittorf法测定离子迁移数实验的改进

以不同浓度的CuSO4溶液为电解质,Pt电极和Cu电极分别为电解电极,通过观察通电前后电解质溶液阳极区和阴极区颜色的变化,定性分析离子的电迁移现象.通过电极上产生/溶解Cu的变化量以及CuSO4溶液浓度的变化,计算了不同浓度CuSO4溶液中离子的迁移数,并对浓度等因素对迁移数的影响规律进行了探讨.本文对传统离子迁移数的实验进行了改进,旨在加深学生对离子电迁移现象的认识及对迁移数概念的理解.     

硫酸铜含量对硫酸铜与丁腈橡胶之间配位交联反应的影响

利用丁腈橡胶(NBR)的可配位侧基——腈基(—CN)与金属盐硫酸铜(CuSO4)的铜离子(Cu2+)之间的配位反应制备了一种配位交联CuSO4/NBR.影响该配位交联反应的因素众多,如热压温度、热压时间、增塑剂等等,考察了CuSO4含量对其的影响.通过X射线光电子能谱(XPS)、动态力学分析(DMA)、差示扫描量热分析(DSC)等手段对CuSO4与NBR之间的配位交联反应进行了分析,并对所得配位交联的CuSO4/NBR进行了交联密度及力学性能的测试.结果发现,随CuSO4含量的不断增加,CuSO4与NBR的配位交联程度逐渐增强,且所得配位交联CuSO4/NBR显示出从典型橡胶到韧性塑料再到脆性塑料的力学转变特性.另外,通过扫描电子显微镜(SEM)及X射线能谱仪(EDX)对材料的微观结构进行了分析,发现CuSO4在聚合物基体中不仅充当交联剂的角色,而且还起着增强填料的作用.     

对中学两个实验装置的改进

在中学我们做了验证质量守恒定律的实验以及固体和液体反应不用加热制取气体的实验。对于这两个实验,我在老师的帮助下作了改进。验证质量守恒定律的实验装置如图1所示：在锥形瓶中加入CuSO4溶液,而在试管中加入NaOH溶液,这样,我们把装有药品的试管放入锥形瓶里是比较困难的,稍有不慎就会将试管打破或将NaOH溶液倒入锥形瓶中与CuS04发生反应,达不到实验目的,而且浪费了药品。     

碱式硫酸铜与氢氧化铜的相互转化及纯净氢氧化铜的制备条件

通过实验定量研究了Cu4(OH)6SO4与Cu(OH)2相互转化的特点及纯净Cu(OH)2制备的条件。研究结果表明,Cu4(OH)6SO4与Cu(OH)2之间能够相互转化,且转化相对缓慢;提高CuSO4浓度有利于Cu(OH)2向Cu4(OH)6SO4转化,提高NaOH浓度有利于Cu4(OH)6SO4向Cu(OH)2转化;纯净Cu(OH)2的制备方法为CuSO4溶液滴加到NaOH溶液中,且NaOH过量15%以上。     

Cu/Cu2+沉积型电极在流动酸性电解液中的电化学性能

在流动的高浓度硫酸铜酸性溶液中, 研究了H2SO4浓度、 温度和CuSO4浓度对Cu/Cu2+沉积型电极在石墨基体上电化学性能的影响. 结果表明, 沉积型铜电极反应受控于阴极沉积过程, 室温下动力学过程较慢, 但铜沉积致密, 不易形成枝晶和海绵状铜. 适当提高H2SO4和CuSO4浓度及反应温度可降低铜沉积的极化, 改善其动力学特征; 但Cu离子的溶解度受限于H2SO4浓度, CuSO4浓度提升空间有限. 优化电解液组成为2.5 mol/L H2SO4＋0.7 mol/L CuSO4, 反应温度45 ℃. 在此条件下, 铜在石墨基体上沉积/溶解的交换电流密度提高1个数量级, 具有良好的动力学特征, 单电极充放电电压差降低近50%, 能量效率超过80%.     

钠与硫酸铜反应的实证分析

大家不要认为这是一个不值得讨论的问题,实际上人们普遍忽视了因反应条件的不同给这个反应带来的复杂性.比如,Na是跟CuSO4溶液反应?还是跟无水CuSO4粉末反应?无水CuSO4是跟固态(常温)金属钠反应?还是跟熔化了的金属钠反应?再有,在什么条件下反应会生成Cu(OH)2?什么条件下反应会生成CuO、Cu2O?又在什么条件下反应是生成Cu等等.下面就不同条件下金属钠与CuSO4反应作些实证分析.     

NBR/CuSO4混合物的非液相配位交联反应

采用示差扫描量热法(DSC),变温傅立叶转变红外光谱(FT-IR)和X射线光电子能谱(XPS)研究了丁腈橡胶/硫酸铜(NBR/CuSO4)混合物的非液相(聚合物熔融态)配位交联反应.DSC曲线上出现了多个放热峰,并随升温速率提高,峰值一致向高温方向移动;结合XPS和FT-IR的分析表明DSC曲线上的第一个放热峰对应于混合物中发生的铜离子与腈基的非液相配位反应;同时采用非等温法(Kissinger法)及Crane方程计算了NBR/CuSO4混合物非液相配位交联反应的表观活化能和反应级数.     

弱酸根离子与铜离子双水解反应的实验探究

从理论分析和实验探究的角度，对反应温度及浓度对Cu2+与弱酸根离子双水解反应的影响进行了讨论。实验结果表明：Cu2+能与CO32-、HCO3-、AlO2-等弱酸根离子发生双水解反应，但同时还可能伴随着其他反应的发生；HCO3-、AlO2-浓度的变化与双水解反应的速率以及生成物无太大关系，而随着CO32-浓度的减小，双水解反应会更加剧烈并倾向于生成Cu（OH）2沉淀。     

多环芳二酐型聚酯亚胺膜的透气性能

多环芳二酐型聚酯亚胺膜的透气性能李悦生，丁孟贤，徐纪平（浙江大学高分子科学与工程研究所，杭州，３１００２７）（中国科学院长春应用化学研究所）关键词聚醚酰亚胺，聚酯酰亚胺，膜，透气性通常的聚酰亚胺加工性能较差，在芳环二酐的苯环间引入醚键等柔性基团后，其...     

微量元素与疾病诊断治疗的研究现状及展望

对国内外微量元素与疾病的关系及其诊断治疗的研究现状及研究动向进行了综述，包括：微量元素与地方病、癌肿、心血管病、糖尿病、眼病、神经系统病等。参考文献72篇。     

Determination and study on residue and dissipation of benazolin-ethyl and quizalofop-p-ethyl in rape and soil

A QuEChERS (quick, easy, cheap, effective, rugged, and safe) method for the determination of benazolin-ethyl and quizalofop-p-ethyl in rape and soil by high-performance liquid chromatography-tandem mass spectrometry has been developed in this study. The residue and dissipation of benazolin-ethyl and quizalofop-p-ethyl in rape and soil were determined with the developed method. The half-lives of benazolin-ethyl in rape straw and soil were 3.7–5.1 days and 14.3–26.3 days, respectively. The half-lives of quizalofop-p-ethyl in rape straw and soil were 5.0-6.1 days and 0.3–9.7 days, respectively. The residue of benazolin-ethyl and quizalofop-p-ethyl in rapeseed and soil were below the detection limit (i.e., 0.5?mg?kg^?1, the maximum residue level of European Union for quizalofop-p-ethyl).     

Synthesis and Optical and Redox Properties of Symmetric and Asymmetric BODIPYs

Herein, we present the synthetic route and the photophysical, electrochemical as well as laser properties of novel red‐emitting boron‐dipyrromethenes (BODIPYs) bearing arylethyne moieties. Such functionality is added along the main axis of the chromophore leading to single‐ and double‐substituted derivatives. The relationship between the dye structure and the lasing properties is studied in detail with the help of the photophysical and electrochemical properties as well as quantum mechanical simulations. The asymmetric substitution of the parent dye induces inhomogeneities in the charge distribution, which leads to an overall loss of the fluorescence capacity, mainly in polar media. Such non‐radiative deactivation processes can be softened by decreasing the electron‐donor ability of the substituent or even avoided by symmetrical substitution. Thus, grafting of the arylethyne moieties at the longitudinal axis of the indacene core results in an effective strategy to develop red‐edge BODIPYs with highly efficient and photostable laser emission.     

Ti-V基储氢合金及其氢化物的物相结构与组分优化设计

Ti-V基储氢合金在室温、常压下即可表现出良好的储氢特性,且质量储氢容量明显高于传统AB₅型储氢合金,从而在氢气的精制和回收、运输和储存及热泵等方面有较早的应用。 此外,在混合气体分离、核反应堆中处理氢的同位素、镍氢电池及燃料电池负极材料等方面也得到了广泛的研究与关注。 基于目前Ti-V基储氢合金的研究现状,概述了该类合金的优势、限制性因素(包括成因)及改性手段。 此外,为了进一步理解Ti-V基合金储氢机理、构建合金组分与储氢特性之间的对应关系,本工作重点围绕Ti-V基储氢合金及其氢化物的结构、组分优化设计展开综述,并对其未来研究方向做出展望。     

钒与糖代谢及糖尿病

微量元素钒作为生物体内必需元素，经证实有很重要的生理学功能，与机体糖代谢有十分密切的关系，且能降低糖尿病动物模型的高血糖，极有可能被开发为治疗糖尿病的药物。     

Conformations and steric and stacking interactions of trisubstituted ureas and thioureas with alkyl and phenyl groups

The monomeric ν(N—H) vibrations of various trisubstituted ureas of the R₂UPh type and -thioureas of the R₂TUPh type have been studied. The trans—out isomerism in the former and the trans—out—cis isomerism in the latter are discussed from the point of view of steric effect. The monomeric ν(N—H) vibrations of RPhUPh and RPhTUPh are also examined. The single band appearing in the spectrum of both ureas is characteristic of the cis form; this suggests the existence of phenyl—phenyl interaction (the stacking interaction proposed by Galabov et al. [10]). Behavior of ν(N—H) vibrations at several concentrations is shown to be clearly different in the three forms (trans, out and cis). The presence of the cis form is confirmed by solvent effect experiments.     

Synthesis of Tyrosol and Hydroxytyrosol Glycofuranosides and Their Biochemical and Biological Activities in Cell-Free and Cellular Assays

Tyrosol (T) and hydroxytyrosol (HOT) and their glycosides are promising candidates for applications in functional food products or in complementary therapy. A series of phenylethanoid glycofuranosides (PEGFs) were synthesized to compare some of their biochemical and biological activities with T and HOT. The optimization of glycosylation promoted by environmentally benign basic zinc carbonate was performed to prepare HOT α-L-arabino-, β-D-apio-, and β-D-ribofuranosides. T and HOT β-D-fructofuranosides, prepared by enzymatic transfructosylation of T and HOT, were also included in the comparative study. The antioxidant capacity and DNA-protective potential of T, HOT, and PEGFs on plasmid DNA were determined using cell-free assays. The DNA-damaging potential of the studied compounds for human hepatoma HepG2 cells and their DNA-protective potential on HepG2 cells against hydrogen peroxide were evaluated using the comet assay. Experiments revealed a spectrum of different activities of the studied compounds. HOT and HOT β-D-fructofuranoside appear to be the best-performing scavengers and protectants of plasmid DNA and HepG2 cells. T and T β-D-fructofuranoside display almost zero or low scavenging/antioxidant activity and protective effects on plasmid DNA or HepG2 cells. The results imply that especially HOT β-D-fructofuranoside and β-D-apiofuranoside could be considered as prospective molecules for the subsequent design of supplements with potential in food and health protection.     

Ferrocene and ferrocenium modified clays and their styrene and EVA composites

In this work, ferrocene- and ferrocenium-containing salts were employed to modify montmorillonite. X-ray measurements show an increase in the interlayer spacing upon clay modification, which means that the larger and more organophilic cations were inserted into the gallery space of montmorillonite. Attempts to prepare nanocomposites of polystyrene and ethylene vinyl acetate copolymers lead to immiscible systems; the morphology of these systems was elucidated with TEM, XRD and cone calorimetry. The thermal stability of the composites is greater than that of the virgin polymer.