共查询到19条相似文献,搜索用时 234 毫秒
1.
通过活化改性聚L-谷氨酸(PLGA)制备酰肼化PLGA(PLGA-ADH)和3-氨基-1,2-丙二醇改性的PLGA(PLGA-OH),PLGA-OH经高碘酸钠氧化制得醛基化PLGA(PLGA-CHO),以PLGA-ADH和PLGA-CHO为前驱体,通过席夫碱交联反应构建了PLGA可注射水凝胶.研究了酰肼化和醛基化改性前后PLGA的结构变化,考察了固含量对水凝胶成胶时间、溶胀行为、机械性能、体外降解性能、药物释放行为及微观形貌等的影响,并进行了初步的细胞培养实验及裸鼠皮下注射成胶实验.结果表明,该PLGA可注射水凝胶在组织工程领域具有良好的应用前景. 相似文献
2.
采用二步法合成了可降解的聚富马酸丙二醇酯(poly(propylene fumarate),PPF),并和N-乙烯基吡咯烷酮(N-vinyl pyrrolidone,NVP)共聚,以1,4-二氧六环为溶剂,通过改变溶剂的量制备了溶胀性能不同的PPF水凝胶.采用万能力学测试仪和扫描电子显微镜分别表征了水凝胶的压缩模量和形貌结构.选择20% PPF和10% NVP的聚合体系,预掺3%的纳米羟基磷灰石(hydroxyapatite,HA),以氯化钠粒子为致孔剂,制备了孔径在280~450 μm的纳米复合多孔水凝胶,使其压缩模量提高了61%.模拟体液矿化10天的结果显示,磷灰石成核位点的存在和良好的与外界液体环境物质交换的能力,促进了多孔水凝胶表面磷灰石的沉积,说明HA的复合可以有效提高PPF多孔水凝胶的成骨活性. 相似文献
3.
桑蚕丝素蛋白初始结构对其矿化作用的影响 总被引:4,自引:0,他引:4
以碱金属离子诱导桑蚕丝素蛋白溶液发生构象转变, 研究了蛋白质初始结构对其矿化作用的影响. FT-IR, XRD和SEM等测试结果显示, 未经任何处理的桑蚕丝素蛋白溶液矿化后形成片状复合物, 其无机相以二水磷酸氢钙(DCPD)为主; 而经过K+和Na+金属离子处理后, 桑蚕丝素溶液的结构由无规线团/螺旋构象向β-折叠发生转变, 矿化后成纤维状, 并相互结合呈现纳米级的三维多孔结构, 其无机相以热力学稳定的羟基磷灰石(HA)为主. 可以认为, 丝素蛋白结构转化为较伸展的β-折叠后, 使得更多的亲水基团暴露在外面, 在丝素蛋白分子不断凝聚成纤过程中, HA结晶快速生长并附着在这些微纤上, 最终形成纤维状的丝素蛋白/HA复合物. 该结果为阐明蛋白质的生物矿化过程及其调控机理提供了理论依据, 同时可以从矿化复合物的形成来反映这些微量元素可能对骨组织形成的影响, 为临床骨组织的修复提供一定的参考. 相似文献
4.
采用3-羟基丁酸酯-3-羟基戊酸酯的共聚物(PHBV)与磷酸三钙(TCP)、羟基磷灰石(HA)、生物活性玻璃(BG)等进行复合,获得了性能优良的生物活性骨组织工程支架材料和骨修复材料.研究和比较了3种复合材料在体外模拟生理环境中发生的生物矿化反应,对比了反应前后因矿化物的形成导致的表面微观形貌的变化,通过检测反应液离子浓度的变化对不同材料的矿化过程和生物活性进行了定量表征.研究结果表明,3种复合材料在模拟生理溶液中发生生物矿化的过程和程度不同,其中PHBV/BG的生物活性反应最为明显. 相似文献
5.
羧甲基壳聚糖含有丰富的羧基和氨基, 通过1-乙基-(3-二甲基氨基丙基)碳二亚胺盐酸盐(EDC)和N-羟基琥珀酰亚胺(NHS)共催化交联羧甲基壳聚糖形成新型水凝胶. 调节EDC/NHS用量, 制备不同交联度的羧甲基壳聚糖水凝胶(CMCS hydrogels). 研究水凝胶的流变行为, 结果表明, 高交联度的水凝胶具有较好的弹性形变能力, 较高的储存模量, 这是因为随着交联度的升高, 羧甲基壳聚糖水凝胶化学交联网络结构趋于完善. 以胸腺五肽(TP-5)为模型药物, 初步评价CMCS水凝胶药物释放行为, 结果表明水凝胶交联度越高, 胸腺五肽释放速度越慢. MTT法初步评价了水凝胶细胞毒性, 细胞形态和细胞相对增值速率, 结果表明水凝胶毒性很低. 由此可见, 水凝胶具有良好的生物相容性, 在药物缓释和组织工程领域具有广阔的应用前景. 相似文献
6.
采用溶胶-凝胶原位复合的方法制备了聚乙烯醇/羟基磷灰石生物活性复合水凝胶,探讨了HA含量对复合水凝胶结构性能的影响,用X射线衍射分析、红外光谱分析、DSC、扫描电镜等方法对HA在PVA水凝胶体系中的晶态结构及分散状态进行了表征,并与物理共混复合法进行了比较.研究发现,采用溶胶-凝胶法原位复合可在PVA水凝胶中形成具有生物活性的HA结晶结构,且分散良好,分布均匀.HA粉体作为异相成核剂,促进了PVA水凝胶基体的结晶,提高了复合水凝胶的力学性能. 相似文献
7.
8.
9.
以3,6-二甲基-2,5-吡嗪二羧酸(P)和三聚氰胺(M)为组分,采用不同的摩尔比(1∶1,1∶2,1∶3)混合配制了3个样品PM11,PM12和PM13,并对其凝胶性能进行了测试.实验结果表明,PM能在水中及部分含水有机溶剂中形成稳定的凝胶,这些凝胶对酸碱具有良好的响应性能.采用扫描电子显微镜分析了3种水凝胶的微观形貌,均为纤维状的网络结构;红外光谱及紫外光谱测试结果表明氢键是形成凝胶的关键驱动力;XRD测试结果显示凝胶为层状结构.对PM12在不同pH值的水中的凝胶性能测试结果表明,在pH=3~11的范围内PM12均能形成凝胶.测试了PM12在混合溶剂中的凝胶性能,并将测试结果与混合溶剂的Hansen溶解度参数关联,以便用于分析溶剂与凝胶因子间的相互作用,所得结果亦表明氢键在凝胶形成的过程中起重要作用. 相似文献
10.
以壳聚糖(CS)为原料,在1-乙基-3-(3-二甲胺丙基)碳-二亚胺盐酸盐(EDC.HCL)和N-羟基琥珀酰亚胺(NHS)的活化作用下,合成了半乳糖基化壳聚糖(GC)单体,并与N-异丙基丙烯酰胺(NIPAAm)反应,制备了温敏性半乳糖基化壳聚糖N-异丙基丙烯酰胺共聚水凝胶(Gal-CS-g-PNIPAAm).通过红外光谱(FTIR)、光电子能谱(XPS)和扫描电子显微镜(SEM)等测试方法对其成分和结构进行了表征,并对其溶胀率和表面亲疏水性进行了研究.在Gal-CS-g-PNIPAAm凝胶表面培养人正常肝细胞系(HL-7702),研究其生长、脱附及转载(再增殖)行为.结果表明Gal-CS-g-PNIPAAm水凝胶具有良好的温度响应性和生物相容性,与PNIPAAm水凝胶相比,Gal-CS-g-PNIPAAm凝胶表面更有利于HL-7702细胞增殖.将温度降低至临界温度(LCST,32.5℃)以下,细胞可以从凝胶表面自发脱附,与酶消化脱附相比,细胞损伤更少.Gal-CS-g-PNIPAAm凝胶表面脱附的细胞比PNIPAAm凝胶表面脱附的细胞活性更高,表明PNIPAAm水凝胶引入GC单体后,凝胶的生物相容性得到改善,且脱附后细胞的增殖活力明显增加. 相似文献
11.
Papidly curable hydrogels were prepared through chemical crosslinking of gelatin with poly(carboxylic acid)s including poly (L-glutamic acid) (PLGA), hyaluronic acid (HA), and poly (acrylic acid) (PAA) by use of water-soluble carbodiimide (WSC). The effects of the nature of added poly (carboxylic acid)s on gelation of mixed gelatinpoly (carboxylic acid) aqueous solutions and adhesion of the resulting hydrogels to the mouse skin were evaluated. The addition of poly (carboxylic acid) s reduced the gelation time of gelatin aqueous solutions except for HA. Mixed gelatin-PLGA solutions were cured more rapidly than other mixed solutions and the gelation time was shortened with the increasing PLGA molecular weight. The resulting gelatin-PLGA hydrogels exhibited stronger adhesion to the mouse skin than gelatin-HA and gelatin-PAA hydrogels. The bonding strength increased with the increase in PLGA molecular weight up to 83,000 and thereafter decreased. The longer gelation time and lower adhesion of the gelatin-PAA hydrogels than the gelatin-PLGA hydrogels seem to be due to poorer compatibility of gelatin with PAA than with PLGA. The mixed gelatin-PLGA solution underwent phase separation when the concentration and molecular weight of PLGA became higher than a threshold. The insignificant or suppressive effect of HA addition might be ascribed to the HA-WSC reaction which was the least effective in hydrogel formation. 相似文献
12.
改性纳米羟基磷灰石/PLGA复合材料的制备及生物活性 总被引:2,自引:0,他引:2
以低聚乳酸接枝改性的羟基磷灰石纳米粒子(op-HA)和聚丙交酯-乙交酯(PLGA)制备的生物可降解纳米复合材料(op-HA/PLGA)为研究对象, 采用FTIR, TGA, ESEM和EDX分析其接枝反应、接枝率、表面形貌和钙磷沉积情况, 通过在材料膜表面接种兔成骨细胞进行体外培养, 采用荧光染色、NIH Image J图像分析和Real-time PCR综合评价细胞在材料表面的形态、黏附面积比、增殖能力和基因表达水平, 以此评价新型骨修复纳米复合材料op-HA/PLGA的表面性质和生物活性. 研究结果表明, op-HA的表面接枝率为8.3%, 掺入至PLGA后可形成富含钙磷的粗糙表面, 促进成骨细胞的黏附、扩展和增殖, 提高Ⅰ型胶原蛋白(Collagen-Ⅰ)、骨形态蛋白-2(BMP-2)和骨连接蛋白(Osteonectin)的基因表达水平, 提高材料的钙磷沉积能力. op-HA/PLGA具有良好的细胞相容性和成骨活性. 相似文献
13.
This letter reports on the fabrication of hollow,porous and non-porous poly(D,L-lactide-co-glycolide) (PLGA) microspheres(MSs) for the controlled release of protein and promotion of cell compatibility of tough hydrogels.PLGA MSs with different structures were prepared with modified double emulsion methods,using bovine serum albumin(BSA) as a porogen during emulsification.The release of the residual BSA from PLGA MSs was investigated as a function of the MS structure.The hollow PLGA MSs show a faster protein release than the porous MSs,while the non-porous MSs have the slowest protein release.Compositing the PLGA MSs with poly(vinyl alcohol)(PVA) hydrogels promoted chondrocyte adhesion and proliferation on the hydrogels. 相似文献
14.
纳米羟基磷灰石表面接枝聚合左旋丙交酯 总被引:1,自引:0,他引:1
为了改善HA纳米粒子与有机PLGA的相容性,分别采用六亚甲基二异氰酸酯加乙二醇、左旋乳酸改性纳米粒子表面后或直接原位接枝聚合左旋丙交酯等3种不同方法,制备了表面修饰聚乳酸的纳米羟基磷灰石(PLLA-g-HA).FTIR、XPS、TEM、TGA测试表明PLLA成功接枝到HA的表面.其中六亚甲基二异氰酸酯加乙二醇改性HA纳米粒子所获得的PLLA接枝率远高于其它两种方法达25%,调整有机相和无机相的比例对PLLA接枝率的影响较小,其在氯仿中可以稳定分散2天以上.共混电纺丝后的拉伸测试表明PLLA-g-HA/PLAG复合纤维膜的力学性能高于HA/PLGA膜,当两者之间的比例为5%拉伸性能达到最大值. 相似文献
15.
Xi Yu Kunxi Zhang Xiaobo Kong Jingbo Yin 《Journal of Polymer Science.Polymer Physics》2019,57(17):1115-1125
Soft tissues, such as fat and skin, present high flexibility and are capable of withstanding large deformation in various functions. Hydrogels that can resemble the mechanical performance of soft tissue are unique and widely demanded. In this study, micellar hydrogels based on biocompatible poly(l ‐glutamic acid) (PLGA) were designed with the enhanced capacity to bear large deformation. Amphipathic triblock copolymer poly(ethylene glycol) acrylate‐co‐poly(ε‐caprolactone)‐co‐poly (ethylene glycol) acrylate (APEG‐PCL‐APEG) with two terminal double bonds was synthesized and self‐assembled into micelles. At the same time, graft copolymers, poly(l ‐glutamic acid)‐g‐hydroxyethyl methacrylate (PLGA‐g‐HEMA) with double bonds were synthesized. APEG‐PCL‐APEG micelles and PLGA‐g‐HEMA were mixed to construct micellar hydrogel via radical polymerization. The crystalline structure and hydrophobic aggregation of copolymers (APEG‐PCL‐APEG) were found to associate with PCL molecular weight. Due to the hydrophobic stress dissipation and crystalline structure of the micelles, the softness and toughness of hydrogels were promoted, exhibiting a 25% increase in ultimate strain. Moreover, the micellar hydrogels were able to load proteins with long‐term retention. In addition, under dynamic mechanical stimulation, the release of proteins could be accelerated. Besides, the micellar hydrogels also supported rabbit adipose‐derived stem cells (rASCs) growth, thus exhibiting the potential toward soft tissue engineering. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 1115–1125 相似文献
16.
LIU Guomin LI Yalong YANG Shuting ZHAO Yian LU Tiancheng JIA Wenyuan JI Xuan LUO Yungang 《高等学校化学研究》2019,35(3):514-520
To explore the ability of dihydroxyphenylalanine-insulin-like growth factor-1 (DOPA-IGF-1) coated hydroxyapatite/poly(lactic-co-glycolic acid)(HA/PLGA) microspheres to promote the proliferation and osteoclastic differentiation of rabbit bone mesenchymal stem cells(rBMSCs), HA/PLGA microspheres with different HA content (10%, 30%, 50%, mass fraction) were prepared by electrospinning method and HA/PLGA microspheres with 50% HA were coated with IGF-1 and DOPA-IGF-1, respectively. They were co-cultured with rBMSCs, respctively. Cell counting kit-8(CCK-8) detection, confocal laser scanning microscopy(CLSM), alkaline phosphatase(ALP) detection and osteogenesis related genes COL IA1, Runx2 and bone morphogenetic protein-2(BMP-2) detection were conducted to detect the proliferation activity, cell morphology, differentiation ability and the expression level of osteogenesis-related genes of cells cultured on all microspheres groups. The results showed that rBMSCs proliferation increased in an HA content dependent manner, and cells proliferated more in the IGF-1 coated and DOPA-IGF-1 coated groups, in particular in DOPA-IGF-1 coated group, and the differences were more remarkable over time (P<0.05). HA/PLGA microspheres promoted the proliferation and osteogenic differentiation of rBMSCs, and DOPA-IGF-1 coating enhanced the proliferation and osteogenic differentiation of rBMSCs. 相似文献
17.
Injectable hydrogels as an important class of biomaterials have gained much attention in tissue engineering. However, their crosslinking degree is difficult to be controlled after being injected into body. As we all know, the crosslinking degree strongly influences the physicochemical properties of hydrogels. Therefore, developing an injectable hydrogel with tunable crosslinking degree in vivo is important for tissue engineering. Herein, we present a dual crosslinking strategy to prepare injectable hydrogels with step-by-step tunable crosslinking degree using Schiff base reaction and photopolymerization. The developed hyaluronic acid/poly(γ-glutamic acid)(HA/γ-PGA) hydrogels exhibit step-bystep tunable swelling behavior, enzymatic degradation behavior and mechanical properties. Mechanical performance tests show that the storage moduli of HA/γ-PGA hydrogels are all less than 2000 Pa and the compressive moduli are in kilopascal, which have a good match with soft tissue. In addition, NIH 3 T3 cells encapsulated in HA/γ-PGA hydrogel exhibit a high cell viability, indicating a good cytocompatibility of HA/γ-PGA hydrogel.Therefore, the developed HA/γ-PGA hydrogel as an injectable biomaterial has a good potential in soft tissue engineering. 相似文献
18.
Youhua Tao Ling Ai Huiyu Bai Xiaoya Liu 《Journal of polymer science. Part A, Polymer chemistry》2012,50(17):3507-3516
Photocrosslinked hyaluronic acid/poly(vinyl alcohol)‐styrylpyridinium (HA/PVA‐SbQ) hydrogels were synthesized for controlled antitumor drug delivery. The photocrosslinking reaction was rapid, and the time required for completely converting into the insoluble hydrogels was less than 500 s on exposure to 5 mW/cm2 UV light irradiation. The resulting hydrogels exhibited sensitivity to the pH value of the surrounding environment. Scanning electron microscopic analysis revealed that the morphology and the pore size of the hydrogels could be controlled by changing the ratio of HA and PVA‐SbQ in the formulations. Paclitaxel (PTX)‐loaded hydrogel could also be formed rapidly by UV irradiation of a mixed solution of HA/PVA‐SbQ and PTX. Release profiles of PTX from the hydrogels showed pH‐dependent and sustained manner. Moreover, our data revealed that PTX released from the HA hydrogels remained biologically active and had the capability to kill cancer cells. In contrast, control groups of HA hydrogels without PTX did not exhibit any cytotoxicity. This study demonstrates the feasibility of using HA‐based hydrogels as a potential carrier for chemotherapeutic drugs for cancer treatments. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012 相似文献
19.
Haotian Li Ping Song Tiankui Qiao Qingqing Cui Xiaofeng Song Baochang Zhang 《先进技术聚合物》2016,27(2):178-184
This work reported a novel composite fiber membrane containing poly(1actic‐co‐glycolic acid)/six‐armed poly(ε‐caprolactone)/hydroxylapatite‐grafted poly(l ‐lactide)/Pluronic F‐108 (PLGA/SAPCL/HA‐g‐PLLA/PF‐108) produced by electrospinning. SAPCL, HA‐g‐PLLA, and PF‐108 could be well blended with PLGA to make fibers. Fibrous surface and diameter had little difference in morphology with the change of fibrous component. Compared with simple PLGA, PLGA/SAPCL, or PLGA/SAPCL/HA‐g‐PLLA fiber membrane, the quaternary composites not only showed the improved mechanics stability but also possessed better hydrophilicity. The quaternary membrane was conductive to accelerate degradation and maintained nice bioactivity. It was not cytotoxicity. These results suggest that the composite fiber membrane may be qualified as guided bone regeneration substrate. Copyright © 2015 John Wiley & Sons, Ltd. 相似文献