聚苯乙烯-b-聚丙烯酸模板剂成核段长度对聚苯胺尺寸及性能的影响

以两亲性嵌段共聚物为模板是构筑导电聚合物纳米结构并对其形貌尺寸进行调控的有效方法之一。 嵌段共聚物成核段长度的变化对其胶束化行为有显著影响,进而也会改变受限于其胶束形貌的导电聚合物的形貌尺寸。 形貌尺寸的变化必然导致导电聚合物电化学性能变化。 本文欲通过嵌段共聚物模板诱导实现对聚苯胺(PANI)形貌尺寸的调控并使其电化学性能得到优化,采用可逆加成-断裂链转移自由基聚合(RAFT)法成功合成了嵌段共聚物聚苯乙烯-b-聚丙烯酸PS_x-b-PAA₇₀(x=38、64、101)并以其胶束为“模板”制备了窄相对分子质量分布的PANI。 在成核段(PS)长度较短时,模板诱导形成的棒状PANI颗粒,直径为100~200 nm。当 x=101时PANI呈现空间网状结构,其放电比容量高于其它样品,在电流密度为1 A/g时,其放电比容量可达386.71 F/g。     

PS-b-P2VP/Fe_3O_4纳米复合材料的制备与表征

采用油酸表面改性的粒径均一的Fe3O4磁性纳米粒子(OA-Fe3O4)与具有微相分离结构的聚苯乙烯-b-聚2-乙烯基吡啶(PS-b-P2VP)嵌段共聚物通过溶液共混,得到具有超顺磁性的PS-b-P2VP/Fe3O4纳米复合材料.结果表明,在OA-Fe3O4质量分数为1%,3%,5%和10%时,纳米粒子分散在PS相区;但OA-Fe3O4含量为8%时,纳米粒子在嵌段聚合物基体中的分散状态发生突变,形成大尺寸聚集体并分散在整个基体中,此时复合材料的流变行为发生相应变化.     

Strain‐Induced Phase Morphology in Melt Drawn Ultrathin Highly Oriented Block Copolymer Films

A strain‐induced microphase morphology has been established by the melt drawing process in a high molecular weight asymmetric polystyrene‐block‐poly(vinyl‐2‐pyridine) (PS‐b‐P2VP) diblock copolymer. For the first time to the best knowledge of the authors, the melt drawing process has been applied to block copolymers to produce free‐standing, ultrathin block copolymer films with a thickness of ≈100 nm. Intriguingly, during the melt drawing of the polymer a global strain‐induced unidirectional order of the microphase separated needle‐like domains of the block copolymer was generated. This morphology consists of a PS matrix with embedded highly oriented P2VP needle‐like domains oriented parallel to the drawing direction. The needle‐like morphology is explained by a simplified extended chain model of the diblock copolymer chains. Annealing of the films leads to a transition from the strain‐induced needle‐like morphology toward the quasi‐equilibrium sphere‐like morphology.

     

Microphase segregation and selective chain scission of poly(2‐methyl‐2‐oxazoline)‐block‐polystyrene

Herein, we report the design and synthesis of a block copolymer (BCP) with a high Flory–Huggins interaction parameter to access 10 nm feature sizes for potential lithographic applications. The investigated BCP is poly[(2‐methyl‐2‐oxazoline)‐block‐styrene] (PMeOx‐b‐PS), where the PMeOx segment functions as a hydrophilic segment. Two BCPs with different molecular weights were prepared using PMeOx as macroinitiator for copper(0) mediated controlled radical polymerization. The thin film self‐assembly of the obtained PMeOx‐b‐PS was performed by solvent annealing and investigated by atomic force microscopy. Both polymers formed PMeOx cylinders in a PS matrix with an average cylinder diameter of 10.5 nm. Additionally, the ability of the PMeOx domains to selectively degrade under ultraviolet irradiation was explored. It was shown that scission of the PMeOx block does occur selectively, and furthermore that the degraded domains can be removed while leaving the PS matrix intact. By combining synthetic accessibility, small feature sizes, and a selectively cleavable domain, this new BCP system holds significant promise as a lithographic mask for patterning surfaces with high precision. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 1349–1357     

光还原Pt掺杂三维有序大孔ZrO2复合材料的光降解与光解水制氢

采用胶晶模板技术结合光还原方法制备了Pt掺杂复合材料三维有序大孔Pt/ZrO2(3DOM Pt/ZrO2)。通过X-射线衍射(XRD)、X-射线光电子能谱(XPS)、扫描电子显微镜(SEM)、紫外–可见漫反射吸收光谱(UV–Vis/DRS)和氮气吸附–脱附等测试方法对纳米复合材料3DOM Pt/ZrO2的晶相、组成、结构、形貌以及表面物理化学性质等进行表征。结果表明,Pt掺杂复合材料3DOM Pt/ZrO2与单体ZrO2的晶相相一致,其形貌呈现三维有序大孔结构,且孔结构排列整齐有序,孔壁为介孔结构。经光还原作用后该复合材料中Pt主要以单质形式存在,并且均匀分布在三维有序复合材料表面。同时,与单体ZrO2相比,纳米复合材料3DOM Pt/ZrO2的BET比表面积显著增大,光吸收性能发生改变,在240–350 nm间呈现强吸收。另外,在多模式光降解实验中,3DOM Pt/ZrO2的光活性明显增强。同时,其光解水制氢性能差不多是P25的2.5倍。     

锂离子电池正极材料LiNi0.4Co0.2Mn0.4O2的合成、表征及电化学性能

以过渡金属乙酸盐和氢氧化锂为原料, 应用共沉淀或流变相预处理高温烧结法优化并制备出LiNi0.4Co0.2Mn0.4O2正极材料. X射线衍射技术(XRD)及Rietveld结构精修、扫描电子显微技术(SEM)、综合热分析(TG-DSC)表征结果和电化学测试结果表明, 该材料具有单一层状结构, 颗粒大小均匀, 热稳定性好, 首次放电比容量高达208.7 mA·h/g(2.0-4.6V, 0.1 C), 电化学性能优异. 非原位(ex situ)XRD测定结果表明, 材料充至高电位下发生的不可逆相变造成了材料的循环容量衰减.     

仪器分析综合实验:MoS2/MIL-101(Fe)的制备、表征及其光催化降解布洛芬的研究

采用溶剂热的方法制备出MoS2/MIL-101（Fe）纳米复合型催化剂,通过X射线衍射、固体紫外-可见漫反射光谱、傅里叶红外光谱、扫描电子显微镜对催化剂的结构和形态进行表征。并用该催化剂对布洛芬（Ibuprofen,IBP）进行光催化降解,采用高效液相色谱对IBP光催化降解前后的浓度进行定量分析,采用高效液相色谱-质谱联用仪对IBP光催化降解产物进行定性分析。本实验将制备复合材料的方法与多种仪器分析方法相结合,让学生了解材料制备方法及其应用的同时,着重学习了各种分析测试仪器的使用方法和基本原理。     

固载型光化学传感器的形貌及结构对检测Hg2+性能的影响

采用氨丙基三乙氧基硅烷(APTES)、异氰酸酯基三乙氧基硅烷(Tri)及纳米金颗粒作为连接体,纯硅中孔分子筛HMS作为无机载体,以分子改造后的染料罗丹明B(RhB)作为有机分子,制得3种固载型光化学传感器,用于检测水中的Hg2+.采用扫描电子显微镜(SEM)、透射电子显微镜(TEM)、N2物理吸附和傅里叶变换红外光谱(FTIR)对材料进行表征,并利用荧光光谱检测水溶液中的Hg2+.结果表明,3种连接体均成功地将有机分子RhB固载到HMS上,所制备的固载型光化学传感器均能够检测水溶液中的Hg2+.研究发现,固载后样品的表面形貌及孔道结构对其检测能力产生影响,具有完好表面形貌及孔道结构的样品RhB-Au-HMS对于Hg2+的检测能力最强,内部孔道坍塌的样品RhB-APTES-HMS对于Hg2+的检测能力最弱.     

Facile synthesis for well‐defined A2B miktoarm star copolymer of poly(3‐hexylthiophene) and poly(methyl methacrylate) by the combination of anionic polymerization and click reaction

We have introduced a facile synthetic route for well‐defined A₂B miktoarm star copolymer composed of regioregular poly(3‐hexylthiophene) and poly(methyl methacrylate) ((P3HT)₂PMMA) by the combination of anionic polymerization and click reaction. First, we synthesized PMMA terminated with 1,3,5‐tris(bromomethyl)benzene (PMMA‐(Br)₂) by anionic polymerization, and two bromines attached to the end of the PMMA chains were replaced by azides (PMMA‐(N₃)₂). Also, monoethynyl‐capped P3HT was synthesized by Grignard metathesis polymerization and post‐end functionalization. Then, copper(I)‐catalyzed Huisgen 1,3‐dipolar cycloaddition click reaction between monoethynyl‐capped P3HT and PMMA‐(N₃)₂ was performed to synthesize (P3HT)₂PMMA. We used a slightly excess amount of monoethynyl‐capped P3HT so that all of the azide groups at the end of the PMMA chains completely reacted with monoethynyl‐capped P3HT. After complete removal of unreacted monoethynyl‐capped P3HT by column chromatography, pure (P3HT)₂PMMA with narrow molecular weight distribution (the polydispersity of 1.18) was obtained. The weight fraction of P3HT and the total molecular weight of (P3HT)₂PMMA are 0.48 and 16,000, respectively. To investigate the effect of the chain architecture on optical property and thin‐film morphology, we synthesized two linear P3HT‐b‐PMMAs (P3HT‐b‐PMMA‐L and P3HT‐b‐PMMA‐H) with similar weight fraction of P3HT block (0.48 for P3HT‐b‐PMMA‐L and 0.45 for P3HT‐b‐PMMA‐H) but two different total molecular weights (7900 for P3HT‐b‐PMMA‐L and 15,300 for P3HT‐b‐PMMA‐H). UV–visible (UV–vis) absorption spectrum and the fibril width of (P3HT)2PMMA thin film were similar to those of P3HT‐b‐PMMA‐L thin film. However, UV–vis spectrum for P3HT‐b‐PMMA‐H thin film was red‐shifted and the fibril width of P3HT‐b‐PMMA‐H was much larger than that of (P3HT)₂PMMA. This indicates that the π–π interaction between P3HT arms in (P3HT)₂PMMA is strong enough to arrange two P3HT backbone chains in (P3HT)₂PMMA to stack one by one along the nanofibril axis. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Controlled polymerization of 2‐(diethylamino)ethyl methacrylate and its block copolymer with N‐isopropylacrylamide by RAFT polymerization

Poly(2‐(diethylamino)ethyl methacrylate) (PDEAEMA) homopolymers with low polydispersities were synthesized by reversible addition fragmentation chain transfer (RAFT) radical polymerization. The performances of two chain transfer agents, 2‐cyanoprop‐2‐yl dithiobenzoate and 4‐cyanopentanic acid dithiobenzoate (CPADB), were compared. It was found that the polymerization of 2‐(diethylamino) ethyl methylacrylate was under good control in the presence of CPADB with 4,4′‐azobis(4‐cyanopentanoic acid) (ACPA) as initiator in 1,4‐dioxane at 70 °C. The kinetic behaviors were investigated under different CPADB/ACPA molar ratios. A long polymerization inhibition period was observed at high [CPADB]/[ACPA] ratio. The influences of [CPADB]/[ACPA] ratio, monomer/[CPADB] ratio, and temperature were studied with respect to monomer conversion, molecular weight control, and polydispersity index (PDI). The PDI decreased from 1.21 to 1.12, as the CPADB/ACPA molar ratio changed from 2 to 10. The molecular weight of PDEAEMA could be controlled by monomer/CPADB molar ratio. The control over MW and PDI was improved as the temperature increased from 60 to 70 °C; however, an additional increase to 80 °C led to a loss of control. Using PDEAEMA macroRAFT agent, pH/thermo double‐responsive block copolymers of PDEAEMA and poly(N‐isopropylacrylamide) (PDEAEMA‐b‐PNIPAM) with narrow polydispersity (PDI, 1.24) were synthesized. The lower critical solution temperature of PDEAEMA‐b‐PNIPAM block copolymer depended on the environmental pH. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3294–3305, 2008     

纳米CexFe1-xO2固溶体的模板法制备及其乙醇水蒸气重整催化性能

以超高比表面炭材料为模板,硝酸盐为氧化物前体,通过改进的模板路线制备了具有较高比表面积的纳米CexFe1-xO2固溶体.采用X射线衍射、拉曼光谱、物理吸附和透射电镜对制备的样品进行了表征.结果表明,α-Fe2O3,CexFe1-xO2固溶体和CeO2的粒子尺寸为5~15nm,CeO2中部分Ce4 离子被Fe3 离子取代,从而形成了CexFe1-xO2固溶体.乙醇水蒸气重整反应结果显示,CexFe1-xO2固溶体比相应的α-Fe2O3和CeO2具有更高的催化活性和对氢气的选择性.